blob: 341e7274f1377d00700c4e78a540761ce3da66bd [file] [log] [blame]
Boris BREZILLON058d2312015-03-04 13:13:05 +01001/*
2 * Copyright (C) 2013 Freescale Semiconductor, Inc.
3 * Copyright (C) 2015 ECA Sinters
4 *
5 * Author: Fabio Estevam <fabio.estevam@freescale.com>
6 * Modified by: Boris Brezillon <boris.brezillon@free-electrons.com>
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11#include <asm/arch/clock.h>
12#include <asm/arch/imx-regs.h>
13#include <asm/arch/iomux.h>
14#include <asm/arch/mx6-pins.h>
Masahiro Yamada1221ce42016-09-21 11:28:55 +090015#include <linux/errno.h>
Boris BREZILLON058d2312015-03-04 13:13:05 +010016#include <asm/gpio.h>
17#include <asm/imx-common/iomux-v3.h>
18#include <asm/imx-common/boot_mode.h>
19#include <malloc.h>
20#include <mmc.h>
21#include <fsl_esdhc.h>
22#include <miiphy.h>
23#include <netdev.h>
24#include <asm/arch/mxc_hdmi.h>
25#include <asm/arch/crm_regs.h>
26#include <linux/fb.h>
27#include <ipu_pixfmt.h>
28#include <asm/io.h>
29#include <asm/arch/sys_proto.h>
30#include <micrel.h>
31#include <asm/imx-common/mxc_i2c.h>
32#include <i2c.h>
33
34#include "../common/mx6.h"
35
36DECLARE_GLOBAL_DATA_PTR;
37
38int dram_init(void)
39{
40 gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
41
42 return 0;
43}
44
45int board_early_init_f(void)
46{
47 seco_mx6_setup_uart_iomux();
48
49 return 0;
50}
51
52int board_phy_config(struct phy_device *phydev)
53{
54 seco_mx6_rgmii_rework(phydev);
55 if (phydev->drv->config)
56 phydev->drv->config(phydev);
57
58 return 0;
59}
60
61int board_eth_init(bd_t *bis)
62{
63 uint32_t base = IMX_FEC_BASE;
64 struct mii_dev *bus = NULL;
65 struct phy_device *phydev = NULL;
66 int ret = 0;
67
68 seco_mx6_setup_enet_iomux();
69
70#ifdef CONFIG_FEC_MXC
71 bus = fec_get_miibus(base, -1);
72 if (!bus)
73 return -ENOMEM;
74
75 /* scan phy 4,5,6,7 */
76 phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII);
77 if (!phydev) {
78 free(bus);
79 return -ENOMEM;
80 }
81
82 printf("using phy at %d\n", phydev->addr);
83 ret = fec_probe(bis, -1, base, bus, phydev);
84 if (ret) {
85 free(phydev);
86 free(bus);
87 printf("FEC MXC: %s:failed\n", __func__);
88 }
89#endif
90
91 return ret;
92}
93
Julien CORJON22bd6b42016-02-05 16:19:33 +010094#define USDHC4_CD_GPIO IMX_GPIO_NR(2, 6)
95
Boris BREZILLON058d2312015-03-04 13:13:05 +010096static struct fsl_esdhc_cfg usdhc_cfg[2] = {
Julien CORJONdd8bd012016-02-05 16:19:32 +010097 {USDHC3_BASE_ADDR, 0, 4},
98 {USDHC4_BASE_ADDR, 0, 4},
Boris BREZILLON058d2312015-03-04 13:13:05 +010099};
100
Julien CORJON22bd6b42016-02-05 16:19:33 +0100101int board_mmc_getcd(struct mmc *mmc)
102{
103 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
104 int ret = 0;
105
106 switch (cfg->esdhc_base) {
107 case USDHC3_BASE_ADDR:
108 ret = 1; /* Assume eMMC is always present */
109 break;
110 case USDHC4_BASE_ADDR:
111 ret = !gpio_get_value(USDHC4_CD_GPIO);
112 break;
113 }
114
115 return ret;
116}
117
Boris BREZILLON058d2312015-03-04 13:13:05 +0100118int board_mmc_init(bd_t *bis)
119{
120 u32 index = 0;
121 int ret;
122
123 /*
124 * Following map is done:
Bin Menga1875592016-02-05 19:30:11 -0800125 * (U-Boot device node) (Physical Port)
Boris BREZILLON058d2312015-03-04 13:13:05 +0100126 * mmc0 eMMC on Board
127 * mmc1 Ext SD
128 */
129 for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
130 switch (index) {
131 case 0:
132 seco_mx6_setup_usdhc_iomux(3);
133 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
Boris BREZILLON058d2312015-03-04 13:13:05 +0100134 break;
135 case 1:
136 seco_mx6_setup_usdhc_iomux(4);
137 usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
Boris BREZILLON058d2312015-03-04 13:13:05 +0100138 break;
139
140 default:
141 printf("Warning: %d exceed maximum number of SD ports %d\n",
142 index + 1, CONFIG_SYS_FSL_USDHC_NUM);
143 return -EINVAL;
144 }
145
146 ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
147 if (ret)
148 return ret;
149 }
150
151 return 0;
152}
153
154int board_init(void)
155{
156 /* address of boot parameters */
157 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
158
159 imx_iomux_v3_setup_pad(MX6_PAD_NANDF_D4__GPIO2_IO04 |
160 MUX_PAD_CTRL(NO_PAD_CTRL));
161
162 gpio_direction_output(IMX_GPIO_NR(2, 4), 0);
163
164 /* Set Low */
165 gpio_set_value(IMX_GPIO_NR(2, 4), 0);
166 udelay(1000);
167
168 /* Set High */
169 gpio_set_value(IMX_GPIO_NR(2, 4), 1);
170
171 return 0;
172}
173
174int checkboard(void)
175{
176 puts("Board: SECO uQ7\n");
177
178 return 0;
179}