blob: 6b92530e42101b6d0efa17ca02a3cf974155e28c [file] [log] [blame]
Vitaly Andrianovef509b92014-04-04 13:16:53 -04001/*
2 * Keystone2: DDR3 initialization
3 *
4 * (C) Copyright 2012-2014
5 * Texas Instruments Incorporated, <www.ti.com>
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
Vitaly Andrianovef509b92014-04-04 13:16:53 -040010#include <asm/io.h>
Hao Zhang101eec52014-07-09 19:48:41 +030011#include <common.h>
Vitaly Andrianov89f44bb2014-10-22 17:47:58 +030012#include <asm/arch/msmc.h>
Khoronzhuk, Ivan0b868582014-07-09 19:48:40 +030013#include <asm/arch/ddr3.h>
Murali Karicheri6c343822014-09-10 15:54:59 +030014#include <asm/arch/psc_defs.h>
Vitaly Andrianovef509b92014-04-04 13:16:53 -040015
Vitaly Andrianov89f44bb2014-10-22 17:47:58 +030016#include <asm/ti-common/ti-edma3.h>
17
18#define DDR3_EDMA_BLK_SIZE_SHIFT 10
19#define DDR3_EDMA_BLK_SIZE (1 << DDR3_EDMA_BLK_SIZE_SHIFT)
20#define DDR3_EDMA_BCNT 0x8000
21#define DDR3_EDMA_CCNT 1
22#define DDR3_EDMA_XF_SIZE (DDR3_EDMA_BLK_SIZE * DDR3_EDMA_BCNT)
23#define DDR3_EDMA_SLOT_NUM 1
24
Khoronzhuk, Ivan0b868582014-07-09 19:48:40 +030025void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg)
Vitaly Andrianovef509b92014-04-04 13:16:53 -040026{
27 unsigned int tmp;
28
29 while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET)
30 & 0x00000001) != 0x00000001)
31 ;
32
33 __raw_writel(phy_cfg->pllcr, base + KS2_DDRPHY_PLLCR_OFFSET);
34
35 tmp = __raw_readl(base + KS2_DDRPHY_PGCR1_OFFSET);
36 tmp &= ~(phy_cfg->pgcr1_mask);
37 tmp |= phy_cfg->pgcr1_val;
38 __raw_writel(tmp, base + KS2_DDRPHY_PGCR1_OFFSET);
39
40 __raw_writel(phy_cfg->ptr0, base + KS2_DDRPHY_PTR0_OFFSET);
41 __raw_writel(phy_cfg->ptr1, base + KS2_DDRPHY_PTR1_OFFSET);
42 __raw_writel(phy_cfg->ptr3, base + KS2_DDRPHY_PTR3_OFFSET);
43 __raw_writel(phy_cfg->ptr4, base + KS2_DDRPHY_PTR4_OFFSET);
44
45 tmp = __raw_readl(base + KS2_DDRPHY_DCR_OFFSET);
46 tmp &= ~(phy_cfg->dcr_mask);
47 tmp |= phy_cfg->dcr_val;
48 __raw_writel(tmp, base + KS2_DDRPHY_DCR_OFFSET);
49
50 __raw_writel(phy_cfg->dtpr0, base + KS2_DDRPHY_DTPR0_OFFSET);
51 __raw_writel(phy_cfg->dtpr1, base + KS2_DDRPHY_DTPR1_OFFSET);
52 __raw_writel(phy_cfg->dtpr2, base + KS2_DDRPHY_DTPR2_OFFSET);
53 __raw_writel(phy_cfg->mr0, base + KS2_DDRPHY_MR0_OFFSET);
54 __raw_writel(phy_cfg->mr1, base + KS2_DDRPHY_MR1_OFFSET);
Vitaly Andrianov235dd6e2015-09-19 16:26:43 +053055 if (!cpu_is_k2g())
56 __raw_writel(phy_cfg->mr2, base + KS2_DDRPHY_MR2_OFFSET);
Vitaly Andrianovef509b92014-04-04 13:16:53 -040057 __raw_writel(phy_cfg->dtcr, base + KS2_DDRPHY_DTCR_OFFSET);
58 __raw_writel(phy_cfg->pgcr2, base + KS2_DDRPHY_PGCR2_OFFSET);
59
60 __raw_writel(phy_cfg->zq0cr1, base + KS2_DDRPHY_ZQ0CR1_OFFSET);
61 __raw_writel(phy_cfg->zq1cr1, base + KS2_DDRPHY_ZQ1CR1_OFFSET);
62 __raw_writel(phy_cfg->zq2cr1, base + KS2_DDRPHY_ZQ2CR1_OFFSET);
63
64 __raw_writel(phy_cfg->pir_v1, base + KS2_DDRPHY_PIR_OFFSET);
65 while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1)
66 ;
67
Vitaly Andrianov235dd6e2015-09-19 16:26:43 +053068 if (cpu_is_k2g()) {
Lokesh Vutlae1ae3572016-08-27 17:19:16 +053069 setbits_le32(base + KS2_DDRPHY_DATX8_4_OFFSET, 0x1);
Vitaly Andrianov235dd6e2015-09-19 16:26:43 +053070 clrbits_le32(base + KS2_DDRPHY_DATX8_5_OFFSET, 0x1);
71 clrbits_le32(base + KS2_DDRPHY_DATX8_6_OFFSET, 0x1);
72 clrbits_le32(base + KS2_DDRPHY_DATX8_7_OFFSET, 0x1);
73 clrbits_le32(base + KS2_DDRPHY_DATX8_8_OFFSET, 0x1);
74 }
75
Vitaly Andrianovef509b92014-04-04 13:16:53 -040076 __raw_writel(phy_cfg->pir_v2, base + KS2_DDRPHY_PIR_OFFSET);
77 while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1)
78 ;
79}
80
Khoronzhuk, Ivan0b868582014-07-09 19:48:40 +030081void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg)
Vitaly Andrianovef509b92014-04-04 13:16:53 -040082{
83 __raw_writel(emif_cfg->sdcfg, base + KS2_DDR3_SDCFG_OFFSET);
84 __raw_writel(emif_cfg->sdtim1, base + KS2_DDR3_SDTIM1_OFFSET);
85 __raw_writel(emif_cfg->sdtim2, base + KS2_DDR3_SDTIM2_OFFSET);
86 __raw_writel(emif_cfg->sdtim3, base + KS2_DDR3_SDTIM3_OFFSET);
87 __raw_writel(emif_cfg->sdtim4, base + KS2_DDR3_SDTIM4_OFFSET);
88 __raw_writel(emif_cfg->zqcfg, base + KS2_DDR3_ZQCFG_OFFSET);
89 __raw_writel(emif_cfg->sdrfc, base + KS2_DDR3_SDRFC_OFFSET);
90}
Hao Zhang101eec52014-07-09 19:48:41 +030091
Vitaly Andrianov89f44bb2014-10-22 17:47:58 +030092int ddr3_ecc_support_rmw(u32 base)
93{
94 u32 value = __raw_readl(base + KS2_DDR3_MIDR_OFFSET);
95
96 /* Check the DDR3 controller ID reg if the controllers
97 supports ECC RMW or not */
98 if (value == 0x40461C02)
99 return 1;
100
101 return 0;
102}
103
104static void ddr3_ecc_config(u32 base, u32 value)
105{
106 u32 data;
107
108 __raw_writel(value, base + KS2_DDR3_ECC_CTRL_OFFSET);
109 udelay(100000); /* delay required to synchronize across clock domains */
110
111 if (value & KS2_DDR3_ECC_EN) {
112 /* Clear the 1-bit error count */
113 data = __raw_readl(base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET);
114 __raw_writel(data, base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET);
115
116 /* enable the ECC interrupt */
117 __raw_writel(KS2_DDR3_1B_ECC_ERR_SYS | KS2_DDR3_2B_ECC_ERR_SYS |
118 KS2_DDR3_WR_ECC_ERR_SYS,
119 base + KS2_DDR3_ECC_INT_ENABLE_SET_SYS_OFFSET);
120
121 /* Clear the ECC error interrupt status */
122 __raw_writel(KS2_DDR3_1B_ECC_ERR_SYS | KS2_DDR3_2B_ECC_ERR_SYS |
123 KS2_DDR3_WR_ECC_ERR_SYS,
124 base + KS2_DDR3_ECC_INT_STATUS_OFFSET);
125 }
126}
127
128static void ddr3_reset_data(u32 base, u32 ddr3_size)
129{
130 u32 mpax[2];
131 u32 seg_num;
132 u32 seg, blks, dst, edma_blks;
133 struct edma3_slot_config slot;
134 struct edma3_channel_config edma_channel;
135 u32 edma_src[DDR3_EDMA_BLK_SIZE/4] __aligned(16) = {0, };
136
137 /* Setup an edma to copy the 1k block to the entire DDR */
138 puts("\nClear entire DDR3 memory to enable ECC\n");
139
140 /* save the SES MPAX regs */
141 msmc_get_ses_mpax(8, 0, mpax);
142
143 /* setup edma slot 1 configuration */
144 slot.opt = EDMA3_SLOPT_TRANS_COMP_INT_ENB |
145 EDMA3_SLOPT_COMP_CODE(0) |
146 EDMA3_SLOPT_STATIC | EDMA3_SLOPT_AB_SYNC;
147 slot.bcnt = DDR3_EDMA_BCNT;
148 slot.acnt = DDR3_EDMA_BLK_SIZE;
149 slot.ccnt = DDR3_EDMA_CCNT;
150 slot.src_bidx = 0;
151 slot.dst_bidx = DDR3_EDMA_BLK_SIZE;
152 slot.src_cidx = 0;
153 slot.dst_cidx = 0;
154 slot.link = EDMA3_PARSET_NULL_LINK;
155 slot.bcntrld = 0;
156 edma3_slot_configure(KS2_EDMA0_BASE, DDR3_EDMA_SLOT_NUM, &slot);
157
158 /* configure quik edma channel */
159 edma_channel.slot = DDR3_EDMA_SLOT_NUM;
160 edma_channel.chnum = 0;
161 edma_channel.complete_code = 0;
162 /* event trigger after dst update */
163 edma_channel.trigger_slot_word = EDMA3_TWORD(dst);
164 qedma3_start(KS2_EDMA0_BASE, &edma_channel);
165
166 /* DDR3 size in segments (4KB seg size) */
167 seg_num = ddr3_size << (30 - KS2_MSMC_SEG_SIZE_SHIFT);
168
169 for (seg = 0; seg < seg_num; seg += KS2_MSMC_MAP_SEG_NUM) {
170 /* map 2GB 36-bit DDR address to 32-bit DDR address in EMIF
171 access slave interface so that edma driver can access */
172 msmc_map_ses_segment(8, 0, base >> KS2_MSMC_SEG_SIZE_SHIFT,
173 KS2_MSMC_DST_SEG_BASE + seg, MPAX_SEG_2G);
174
175 if ((seg_num - seg) > KS2_MSMC_MAP_SEG_NUM)
176 edma_blks = KS2_MSMC_MAP_SEG_NUM <<
177 (KS2_MSMC_SEG_SIZE_SHIFT
178 - DDR3_EDMA_BLK_SIZE_SHIFT);
179 else
180 edma_blks = (seg_num - seg) << (KS2_MSMC_SEG_SIZE_SHIFT
181 - DDR3_EDMA_BLK_SIZE_SHIFT);
182
183 /* Use edma driver to scrub 2GB DDR memory */
184 for (dst = base, blks = 0; blks < edma_blks;
185 blks += DDR3_EDMA_BCNT, dst += DDR3_EDMA_XF_SIZE) {
186 edma3_set_src_addr(KS2_EDMA0_BASE,
187 edma_channel.slot, (u32)edma_src);
188 edma3_set_dest_addr(KS2_EDMA0_BASE,
189 edma_channel.slot, (u32)dst);
190
191 while (edma3_check_for_transfer(KS2_EDMA0_BASE,
192 &edma_channel))
193 udelay(10);
194 }
195 }
196
197 qedma3_stop(KS2_EDMA0_BASE, &edma_channel);
198
199 /* restore the SES MPAX regs */
200 msmc_set_ses_mpax(8, 0, mpax);
201}
202
203static void ddr3_ecc_init_range(u32 base)
204{
205 u32 ecc_val = KS2_DDR3_ECC_EN;
206 u32 rmw = ddr3_ecc_support_rmw(base);
207
208 if (rmw)
209 ecc_val |= KS2_DDR3_ECC_RMW_EN;
210
211 __raw_writel(0, base + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET);
212
213 ddr3_ecc_config(base, ecc_val);
214}
215
216void ddr3_enable_ecc(u32 base, int test)
217{
218 u32 ecc_val = KS2_DDR3_ECC_ENABLE;
219 u32 rmw = ddr3_ecc_support_rmw(base);
220
221 if (test)
222 ecc_val |= KS2_DDR3_ECC_ADDR_RNG_1_EN;
223
224 if (!rmw) {
225 if (!test)
226 /* by default, disable ecc when rmw = 0 and no
227 ecc test */
228 ecc_val = 0;
229 } else {
230 ecc_val |= KS2_DDR3_ECC_RMW_EN;
231 }
232
233 ddr3_ecc_config(base, ecc_val);
234}
235
236void ddr3_disable_ecc(u32 base)
237{
238 ddr3_ecc_config(base, 0);
239}
240
241#if defined(CONFIG_SOC_K2HK) || defined(CONFIG_SOC_K2L)
242static void cic_init(u32 base)
243{
244 /* Disable CIC global interrupts */
245 __raw_writel(0, base + KS2_CIC_GLOBAL_ENABLE);
246
247 /* Set to normal mode, no nesting, no priority hold */
248 __raw_writel(0, base + KS2_CIC_CTRL);
249 __raw_writel(0, base + KS2_CIC_HOST_CTRL);
250
251 /* Enable CIC global interrupts */
252 __raw_writel(1, base + KS2_CIC_GLOBAL_ENABLE);
253}
254
255static void cic_map_cic_to_gic(u32 base, u32 chan_num, u32 irq_num)
256{
257 /* Map the system interrupt to a CIC channel */
258 __raw_writeb(chan_num, base + KS2_CIC_CHAN_MAP(0) + irq_num);
259
260 /* Enable CIC system interrupt */
261 __raw_writel(irq_num, base + KS2_CIC_SYS_ENABLE_IDX_SET);
262
263 /* Enable CIC Host interrupt */
264 __raw_writel(chan_num, base + KS2_CIC_HOST_ENABLE_IDX_SET);
265}
266
267static void ddr3_map_ecc_cic2_irq(u32 base)
268{
269 cic_init(base);
270 cic_map_cic_to_gic(base, KS2_CIC2_DDR3_ECC_CHAN_NUM,
271 KS2_CIC2_DDR3_ECC_IRQ_NUM);
272}
273#endif
274
Vitaly Andrianov66c98a02015-02-11 14:07:58 -0500275void ddr3_init_ecc(u32 base, u32 ddr3_size)
Vitaly Andrianov89f44bb2014-10-22 17:47:58 +0300276{
Vitaly Andrianov89f44bb2014-10-22 17:47:58 +0300277 if (!ddr3_ecc_support_rmw(base)) {
278 ddr3_disable_ecc(base);
279 return;
280 }
281
282 ddr3_ecc_init_range(base);
Vitaly Andrianov89f44bb2014-10-22 17:47:58 +0300283 ddr3_reset_data(CONFIG_SYS_SDRAM_BASE, ddr3_size);
284
285 /* mapping DDR3 ECC system interrupt from CIC2 to GIC */
286#if defined(CONFIG_SOC_K2HK) || defined(CONFIG_SOC_K2L)
287 ddr3_map_ecc_cic2_irq(KS2_CIC2_BASE);
288#endif
289 ddr3_enable_ecc(base, 0);
290}
291
292void ddr3_check_ecc_int(u32 base)
293{
294 char *env;
295 int ecc_test = 0;
296 u32 value = __raw_readl(base + KS2_DDR3_ECC_INT_STATUS_OFFSET);
297
298 env = getenv("ecc_test");
299 if (env)
300 ecc_test = simple_strtol(env, NULL, 0);
301
302 if (value & KS2_DDR3_WR_ECC_ERR_SYS)
303 puts("DDR3 ECC write error interrupted\n");
304
305 if (value & KS2_DDR3_2B_ECC_ERR_SYS) {
306 puts("DDR3 ECC 2-bit error interrupted\n");
307
308 if (!ecc_test) {
309 puts("Reseting the device ...\n");
310 reset_cpu(0);
311 }
312 }
313
314 value = __raw_readl(base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET);
315 if (value) {
316 printf("1-bit ECC err count: 0x%x\n", value);
317 value = __raw_readl(base +
318 KS2_DDR3_ONE_BIT_ECC_ERR_ADDR_LOG_OFFSET);
319 printf("1-bit ECC err address log: 0x%x\n", value);
320 }
321}
322
Hao Zhang101eec52014-07-09 19:48:41 +0300323void ddr3_reset_ddrphy(void)
324{
325 u32 tmp;
326
327 /* Assert DDR3A PHY reset */
Khoronzhuk, Ivan3d315382014-07-09 23:44:44 +0300328 tmp = readl(KS2_DDR3APLLCTL1);
Hao Zhang101eec52014-07-09 19:48:41 +0300329 tmp |= KS2_DDR3_PLLCTRL_PHY_RESET;
Khoronzhuk, Ivan3d315382014-07-09 23:44:44 +0300330 writel(tmp, KS2_DDR3APLLCTL1);
Hao Zhang101eec52014-07-09 19:48:41 +0300331
332 /* wait 10us to catch the reset */
333 udelay(10);
334
335 /* Release DDR3A PHY reset */
Khoronzhuk, Ivan3d315382014-07-09 23:44:44 +0300336 tmp = readl(KS2_DDR3APLLCTL1);
Hao Zhang101eec52014-07-09 19:48:41 +0300337 tmp &= ~KS2_DDR3_PLLCTRL_PHY_RESET;
Khoronzhuk, Ivan3d315382014-07-09 23:44:44 +0300338 __raw_writel(tmp, KS2_DDR3APLLCTL1);
Hao Zhang101eec52014-07-09 19:48:41 +0300339}
Murali Karicheri6c343822014-09-10 15:54:59 +0300340
341#ifdef CONFIG_SOC_K2HK
342/**
343 * ddr3_reset_workaround - reset workaround in case if leveling error
344 * detected for PG 1.0 and 1.1 k2hk SoCs
345 */
346void ddr3_err_reset_workaround(void)
347{
348 unsigned int tmp;
349 unsigned int tmp_a;
350 unsigned int tmp_b;
351
352 /*
353 * Check for PGSR0 error bits of DDR3 PHY.
354 * Check for WLERR, QSGERR, WLAERR,
355 * RDERR, WDERR, REERR, WEERR error to see if they are set or not
356 */
357 tmp_a = __raw_readl(KS2_DDR3A_DDRPHYC + KS2_DDRPHY_PGSR0_OFFSET);
358 tmp_b = __raw_readl(KS2_DDR3B_DDRPHYC + KS2_DDRPHY_PGSR0_OFFSET);
359
360 if (((tmp_a & 0x0FE00000) != 0) || ((tmp_b & 0x0FE00000) != 0)) {
361 printf("DDR Leveling Error Detected!\n");
362 printf("DDR3A PGSR0 = 0x%x\n", tmp_a);
363 printf("DDR3B PGSR0 = 0x%x\n", tmp_b);
364
365 /*
366 * Write Keys to KICK registers to enable writes to registers
367 * in boot config space
368 */
369 __raw_writel(KS2_KICK0_MAGIC, KS2_KICK0);
370 __raw_writel(KS2_KICK1_MAGIC, KS2_KICK1);
371
372 /*
373 * Move DDR3A Module out of reset isolation by setting
374 * MDCTL23[12] = 0
375 */
376 tmp_a = __raw_readl(KS2_PSC_BASE +
377 PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3A));
378
379 tmp_a = PSC_REG_MDCTL_SET_RESET_ISO(tmp_a, 0);
380 __raw_writel(tmp_a, KS2_PSC_BASE +
381 PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3A));
382
383 /*
384 * Move DDR3B Module out of reset isolation by setting
385 * MDCTL24[12] = 0
386 */
387 tmp_b = __raw_readl(KS2_PSC_BASE +
388 PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3B));
389 tmp_b = PSC_REG_MDCTL_SET_RESET_ISO(tmp_b, 0);
390 __raw_writel(tmp_b, KS2_PSC_BASE +
391 PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3B));
392
393 /*
394 * Write 0x5A69 Key to RSTCTRL[15:0] to unlock writes
395 * to RSTCTRL and RSTCFG
396 */
397 tmp = __raw_readl(KS2_RSTCTRL);
398 tmp &= KS2_RSTCTRL_MASK;
399 tmp |= KS2_RSTCTRL_KEY;
400 __raw_writel(tmp, KS2_RSTCTRL);
401
402 /*
403 * Set PLL Controller to drive hard reset on SW trigger by
404 * setting RSTCFG[13] = 0
405 */
406 tmp = __raw_readl(KS2_RSTCTRL_RSCFG);
407 tmp &= ~KS2_RSTYPE_PLL_SOFT;
408 __raw_writel(tmp, KS2_RSTCTRL_RSCFG);
409
410 reset_cpu(0);
411 }
412}
413#endif