blob: 4cd447206117b3a29fc92a687f6fe8f70a0270ce [file] [log] [blame]
wdenkf12e5682003-07-07 20:07:54 +00001/*
wdenk414eec32005-04-02 22:37:54 +00002 * (C) Copyright 2000-2005
wdenkf12e5682003-07-07 20:07:54 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
32 * High Level Configuration Options
33 * (easy to change)
34 */
35
36#define CONFIG_MPC855 1 /* This is a MPC855 CPU */
37#define CONFIG_TQM855M 1 /* ...on a TQM8xxM module */
dzue7df0292003-10-19 21:43:26 +000038#define CONFIG_NSCU 1
wdenkf12e5682003-07-07 20:07:54 +000039
40#define CONFIG_8xx_CONS_SCC1 1 /* Console is on SMC1 */
41
42#define CONFIG_66MHz 1 /* running at 66 MHz, 1:1 clock */
43
44#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
45
46#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
47
wdenkf12e5682003-07-07 20:07:54 +000048#define CONFIG_BOARD_TYPES 1 /* support board types */
49
50#define CONFIG_PREBOOT "echo;" \
51 "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
52 "echo"
53
54#undef CONFIG_BOOTARGS
55
56#define CONFIG_EXTRA_ENV_SETTINGS \
57 "netdev=eth0\0" \
58 "nfsargs=setenv bootargs root=/dev/nfs rw " \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010059 "nfsroot=${serverip}:${rootpath}\0" \
wdenkf12e5682003-07-07 20:07:54 +000060 "ramargs=setenv bootargs root=/dev/ram rw\0" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010061 "addip=setenv bootargs ${bootargs} " \
62 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
63 ":${hostname}:${netdev}:off panic=1\0" \
wdenkf12e5682003-07-07 20:07:54 +000064 "flash_nfs=run nfsargs addip;" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010065 "bootm ${kernel_addr}\0" \
wdenkf12e5682003-07-07 20:07:54 +000066 "flash_self=run ramargs addip;" \
Wolfgang Denkfe126d82005-11-20 21:40:11 +010067 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
68 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
wdenkf12e5682003-07-07 20:07:54 +000069 "rootpath=/opt/eldk/ppc_8xx\0" \
70 "bootfile=/tftpboot/NSCU/uImage\0" \
71 "kernel_addr=40080000\0" \
72 "ramdisk_addr=40180000\0" \
73 ""
74#define CONFIG_BOOTCOMMAND "run flash_self"
75
wdenkcfca5e62004-08-01 13:09:47 +000076#define CONFIG_MISC_INIT_R 1
77
wdenkf12e5682003-07-07 20:07:54 +000078#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
79#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
80
81#undef CONFIG_WATCHDOG /* watchdog disabled */
82
83#define CONFIG_STATUS_LED 1 /* Status LED enabled */
84
85#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
86
Jon Loeliger7be044e2007-07-09 21:24:19 -050087/*
88 * BOOTP options
89 */
90#define CONFIG_BOOTP_SUBNETMASK
91#define CONFIG_BOOTP_GATEWAY
92#define CONFIG_BOOTP_HOSTNAME
93#define CONFIG_BOOTP_BOOTPATH
94#define CONFIG_BOOTP_BOOTFILESIZE
95
wdenkf12e5682003-07-07 20:07:54 +000096
97#define CONFIG_MAC_PARTITION
98#define CONFIG_DOS_PARTITION
99
100#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
101
wdenkbdccc4f2003-08-05 17:43:17 +0000102#define CONFIG_ISP1362_USB /* ISP1362 USB OTG controller */
103
wdenkf12e5682003-07-07 20:07:54 +0000104
Jon Loeligere18a1062007-07-08 14:21:43 -0500105/*
106 * Command line configuration.
107 */
108#include <config_cmd_default.h>
109
110#define CONFIG_CMD_ASKENV
111#define CONFIG_CMD_DATE
112#define CONFIG_CMD_DHCP
113#define CONFIG_CMD_IDE
114#define CONFIG_CMD_NFS
115#define CONFIG_CMD_SNTP
116
wdenkf12e5682003-07-07 20:07:54 +0000117
118/*
119 * Miscellaneous configurable options
120 */
121#define CFG_LONGHELP /* undef to save memory */
122#define CFG_PROMPT "=> " /* Monitor Command Prompt */
123
124#if 0
125#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
126#endif
127#ifdef CFG_HUSH_PARSER
128#define CFG_PROMPT_HUSH_PS2 "> "
129#endif
130
Jon Loeligere18a1062007-07-08 14:21:43 -0500131#if defined(CONFIG_CMD_KGDB)
wdenkf12e5682003-07-07 20:07:54 +0000132#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
133#else
134#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
135#endif
136#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
137#define CFG_MAXARGS 16 /* max number of command args */
138#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
139
140#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
141#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
142
143#define CFG_LOAD_ADDR 0x100000 /* default load address */
144
145#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
146
147#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
148
149/*
150 * Low Level Configuration Settings
151 * (address mappings, register initial values, etc.)
152 * You should know what you are doing if you make changes here.
153 */
154/*-----------------------------------------------------------------------
155 * Internal Memory Mapped Register
156 */
157#define CFG_IMMR 0xFFF00000
158
159/*-----------------------------------------------------------------------
160 * Definitions for initial stack pointer and data area (in DPRAM)
161 */
162#define CFG_INIT_RAM_ADDR CFG_IMMR
163#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
164#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
165#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
166#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
167
168/*-----------------------------------------------------------------------
169 * Start addresses for the final memory configuration
170 * (Set up by the startup code)
171 * Please note that CFG_SDRAM_BASE _must_ start at 0
172 */
173#define CFG_SDRAM_BASE 0x00000000
174#define CFG_FLASH_BASE 0x40000000
175#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
176#define CFG_MONITOR_BASE CFG_FLASH_BASE
177#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
178
179/*
180 * For booting Linux, the board info and command line data
181 * have to be in the first 8 MB of memory, since this is
182 * the maximum mapped by the Linux kernel during initialization.
183 */
184#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
185
186/*-----------------------------------------------------------------------
187 * FLASH organization
188 */
189#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
190#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
191
192#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
193#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
194
195#define CFG_ENV_IS_IN_FLASH 1
196#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
197#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
198#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
199
200/* Address and size of Redundant Environment Sector */
201#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
202#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
203
204/*-----------------------------------------------------------------------
205 * Hardware Information Block
206 */
207#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
208#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
209#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
210
211/*-----------------------------------------------------------------------
212 * Cache Configuration
213 */
214#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Jon Loeligere18a1062007-07-08 14:21:43 -0500215#if defined(CONFIG_CMD_KGDB)
wdenkf12e5682003-07-07 20:07:54 +0000216#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
217#endif
218
219/*-----------------------------------------------------------------------
220 * SYPCR - System Protection Control 11-9
221 * SYPCR can only be written once after reset!
222 *-----------------------------------------------------------------------
223 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
224 */
225#if defined(CONFIG_WATCHDOG)
226#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
227 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
228#else
229#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
230#endif
231
232/*-----------------------------------------------------------------------
233 * SIUMCR - SIU Module Configuration 11-6
234 *-----------------------------------------------------------------------
235 * PCMCIA config., multi-function pin tri-state
236 */
237#ifndef CONFIG_CAN_DRIVER
238#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
239#else /* we must activate GPL5 in the SIUMCR for CAN */
240#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
241#endif /* CONFIG_CAN_DRIVER */
242
243/*-----------------------------------------------------------------------
244 * TBSCR - Time Base Status and Control 11-26
245 *-----------------------------------------------------------------------
246 * Clear Reference Interrupt Status, Timebase freezing enabled
247 */
248#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
249
250/*-----------------------------------------------------------------------
251 * RTCSC - Real-Time Clock Status and Control Register 11-27
252 *-----------------------------------------------------------------------
253 */
254#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
255
256/*-----------------------------------------------------------------------
257 * PISCR - Periodic Interrupt Status and Control 11-31
258 *-----------------------------------------------------------------------
259 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
260 */
261#define CFG_PISCR (PISCR_PS | PISCR_PITF)
262
263/*-----------------------------------------------------------------------
264 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
265 *-----------------------------------------------------------------------
266 * Reset PLL lock status sticky bit, timer expired status bit and timer
267 * interrupt status bit
wdenkf12e5682003-07-07 20:07:54 +0000268 */
wdenkf12e5682003-07-07 20:07:54 +0000269#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
wdenkf12e5682003-07-07 20:07:54 +0000270
271/*-----------------------------------------------------------------------
272 * SCCR - System Clock and reset Control Register 15-27
273 *-----------------------------------------------------------------------
274 * Set clock output, timebase and RTC source and divider,
275 * power management and some other internal clocks
276 */
277#define SCCR_MASK SCCR_EBDF11
wdenkcfca5e62004-08-01 13:09:47 +0000278#define CFG_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
wdenkf12e5682003-07-07 20:07:54 +0000279 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
280 SCCR_DFALCD00)
wdenkf12e5682003-07-07 20:07:54 +0000281
282/*-----------------------------------------------------------------------
283 * PCMCIA stuff
284 *-----------------------------------------------------------------------
285 *
286 */
dzue7df0292003-10-19 21:43:26 +0000287/* NSCU use both slots, SLOT_A as "primary". */
288#define CONFIG_PCMCIA_SLOT_A 1
289
wdenkf12e5682003-07-07 20:07:54 +0000290#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
291#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
292#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
293#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
294#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
295#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
296#define CFG_PCMCIA_IO_ADDR (0xEC000000)
297#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
dzue7df0292003-10-19 21:43:26 +0000298#define PCMCIA_MEM_WIN_NO 8 /* override default 4 in pcmcia.h */
299#define PCMCIA_SOCKETS_NO 2 /* we have two sockets */
wdenk79536a62004-09-27 20:20:11 +0000300#undef NSCU_OE_INV /* PCMCIA_GCRX_CXOE was inverted on early boards */
wdenkf12e5682003-07-07 20:07:54 +0000301
302/*-----------------------------------------------------------------------
303 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
304 *-----------------------------------------------------------------------
305 */
306
307#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
308
309#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
310#undef CONFIG_IDE_LED /* LED for ide not supported */
311#undef CONFIG_IDE_RESET /* reset for ide not supported */
312
dzue7df0292003-10-19 21:43:26 +0000313#define CFG_IDE_MAXBUS 2 /* max. 2 IDE buses */
314#define CFG_IDE_MAXDEVICE 4 /* max. 2 drives per IDE bus */
wdenkf12e5682003-07-07 20:07:54 +0000315
316#define CFG_ATA_IDE0_OFFSET 0x0000
dzue7df0292003-10-19 21:43:26 +0000317#define CFG_ATA_IDE1_OFFSET (4 * CFG_PCMCIA_MEM_SIZE) /* starts @ 4th window */
wdenkf12e5682003-07-07 20:07:54 +0000318
319#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
320
321/* Offset for data I/O */
322#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
323
324/* Offset for normal register accesses */
325#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
326
327/* Offset for alternate registers */
328#define CFG_ATA_ALT_OFFSET 0x0100
329
330/*-----------------------------------------------------------------------
331 *
332 *-----------------------------------------------------------------------
333 *
334 */
335#define CFG_DER 0
336
337/*
338 * Init Memory Controller:
339 *
340 * BR0/1 and OR0/1 (FLASH)
341 */
342
343#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
344#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
345
346/* used to re-map FLASH both when starting from SRAM or FLASH:
347 * restrict access enough to keep SRAM working (if any)
348 * but not too much to meddle with FLASH accesses
349 */
350#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
351#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
352
353/*
354 * FLASH timing:
355 */
wdenkf12e5682003-07-07 20:07:54 +0000356#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
357 OR_SCY_3_CLK | OR_EHTR | OR_BI)
wdenkf12e5682003-07-07 20:07:54 +0000358
359#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
360#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
361#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
362
363#define CFG_OR1_REMAP CFG_OR0_REMAP
364#define CFG_OR1_PRELIM CFG_OR0_PRELIM
365#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
366
367/*
368 * BR2/3 and OR2/3 (SDRAM)
369 *
370 */
371#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
372#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
373#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
374
375/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
376#define CFG_OR_TIMING_SDRAM 0x00000A00
377
378#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
379#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
380
381#ifndef CONFIG_CAN_DRIVER
382#define CFG_OR3_PRELIM CFG_OR2_PRELIM
383#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
384#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
385#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
386#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
387#define CFG_OR3_CAN (CFG_CAN_OR_AM | OR_G5LA | OR_BI)
388#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) | \
389 BR_PS_8 | BR_MS_UPMB | BR_V )
390#endif /* CONFIG_CAN_DRIVER */
391
wdenkbdccc4f2003-08-05 17:43:17 +0000392#ifdef CONFIG_ISP1362_USB
393#define CFG_ISP1362_BASE 0xD0000000 /* ISP1362 mapped at 0xD0000000 */
394#define CFG_ISP1362_OR_AM 0xFFFF8000 /* 32 kB address mask */
395#define CFG_OR5_ISP1362 (CFG_ISP1362_OR_AM | OR_CSNT_SAM | \
396 OR_ACS_DIV2 | OR_BI | OR_SCY_5_CLK)
397#define CFG_BR5_ISP1362 ((CFG_ISP1362_BASE & BR_BA_MSK) | \
398 BR_PS_16 | BR_MS_GPCM | BR_V )
399#endif /* CONFIG_ISP1362_USB */
wdenk42d1f032003-10-15 23:53:47 +0000400
wdenkf12e5682003-07-07 20:07:54 +0000401/*
402 * Memory Periodic Timer Prescaler
403 *
404 * The Divider for PTA (refresh timer) configuration is based on an
405 * example SDRAM configuration (64 MBit, one bank). The adjustment to
406 * the number of chip selects (NCS) and the actually needed refresh
407 * rate is done by setting MPTPR.
408 *
409 * PTA is calculated from
410 * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
411 *
412 * gclk CPU clock (not bus clock!)
413 * Trefresh Refresh cycle * 4 (four word bursts used)
414 *
415 * 4096 Rows from SDRAM example configuration
416 * 1000 factor s -> ms
417 * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
418 * 4 Number of refresh cycles per period
419 * 64 Refresh cycle in ms per number of rows
420 * --------------------------------------------
421 * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
422 *
423 * 50 MHz => 50.000.000 / Divider = 98
424 * 66 Mhz => 66.000.000 / Divider = 129
425 * 80 Mhz => 80.000.000 / Divider = 156
426 */
wdenkcfca5e62004-08-01 13:09:47 +0000427
428#define CFG_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64))
429#define CFG_MAMR_PTA 98
wdenkf12e5682003-07-07 20:07:54 +0000430
431/*
432 * For 16 MBit, refresh rates could be 31.3 us
433 * (= 64 ms / 2K = 125 / quad bursts).
434 * For a simpler initialization, 15.6 us is used instead.
435 *
436 * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
437 * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
438 */
439#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
440#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
441
442/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
443#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
444#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
445
446/*
447 * MAMR settings for SDRAM
448 */
449
450/* 8 column SDRAM */
451#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
452 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
453 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
454/* 9 column SDRAM */
455#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
456 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
457 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
458
459
460/*
461 * Internal Definitions
462 *
463 * Boot Flags
464 */
465#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
466#define BOOTFLAG_WARM 0x02 /* Software reboot */
467
468#undef CONFIG_SCC1_ENET
469#define CONFIG_FEC_ENET
470/* #define CONFIG_ETHPRIME "FEC ETHERNET" */
471
472#endif /* __CONFIG_H */