blob: d02648420ff17a2ee56d0b6a5295c9dda9531379 [file] [log] [blame]
Łukasz Dałek34cda7a2012-10-15 07:46:54 +00001/*
2 * iPAQ h2200 board configuration
3 *
4 * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
5 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02006 * SPDX-License-Identifier: GPL-2.0+
Łukasz Dałek34cda7a2012-10-15 07:46:54 +00007 */
8
9#ifndef __CONFIG_H
10#define __CONFIG_H
11
12#define MACH_TYPE_H2200 341
13#define CONFIG_MACH_TYPE MACH_TYPE_H2200
14
15#define CONFIG_CPU_PXA25X 1
16#define CONFIG_BOARD_H2200
17
18#define CONFIG_SYS_NO_FLASH
19
Łukasz Dałek34cda7a2012-10-15 07:46:54 +000020#define CONFIG_NR_DRAM_BANKS 1
21#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
22#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
23
24#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
25#define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE
26
27#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
28
29#define CONFIG_ENV_SIZE 0x00040000
30#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
31
32#define CONFIG_ENV_IS_NOWHERE
33#define CONFIG_SYS_MAXARGS 16
34#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */
35
36/*
37 * iPAQ 1st stage bootloader loads 2nd stage bootloader
38 * at address 0xa0040000 but bootloader requires header
39 * which is 0x1000 long.
40 *
41 * --- Header begin ---
42 * .word 0xea0003fe ; b 0x1000
43 *
44 * .org 0x40
45 * .ascii "ECEC"
46 *
47 * .org 0x1000
48 * --- Header end ---
49 */
50
51#define CONFIG_SYS_TEXT_BASE 0xa0041000
52
53/*
54 * Static chips
55 */
56
57#define CONFIG_SYS_MSC0_VAL 0x246c7ffc
58#define CONFIG_SYS_MSC1_VAL 0x7ff07ff0
59#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0
60
61/*
62 * PCMCIA and CF Interfaces
63 */
64
65#define CONFIG_SYS_MECR_VAL 0x00000000
66#define CONFIG_SYS_MCMEM0_VAL 0x00000000
67#define CONFIG_SYS_MCMEM1_VAL 0x00000000
68#define CONFIG_SYS_MCATT0_VAL 0x00000000
69#define CONFIG_SYS_MCATT1_VAL 0x00000000
70#define CONFIG_SYS_MCIO0_VAL 0x00000000
71#define CONFIG_SYS_MCIO1_VAL 0x00000000
72
73#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
74#define CONFIG_SYS_SXCNFG_VAL 0x00040004
75
76#define CONFIG_SYS_MDREFR_VAL 0x0099E018
77#define CONFIG_SYS_MDCNFG_VAL 0x01C801CB
78#define CONFIG_SYS_MDMRS_VAL 0x00220022
79
80#define CONFIG_SYS_PSSR_VAL 0x00000000
81#define CONFIG_SYS_CKEN 0x00004840
82#define CONFIG_SYS_CCCR 0x00000161
83
84/*
85 * GPIOs
86 */
87
88#define CONFIG_SYS_GPSR0_VAL 0x01000000
89#define CONFIG_SYS_GPSR1_VAL 0x00000000
90#define CONFIG_SYS_GPSR2_VAL 0x00010000
91
92#define CONFIG_SYS_GPCR0_VAL 0x00000000
93#define CONFIG_SYS_GPCR1_VAL 0x00000000
94#define CONFIG_SYS_GPCR2_VAL 0x00000000
95
96#define CONFIG_SYS_GPDR0_VAL 0xF7E38C00
97#define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83
98#define CONFIG_SYS_GPDR2_VAL 0x000157FF
99
100#define CONFIG_SYS_GAFR0_L_VAL 0x80401000
101#define CONFIG_SYS_GAFR0_U_VAL 0x00000112
102#define CONFIG_SYS_GAFR1_L_VAL 0x600A9550
103#define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA
104#define CONFIG_SYS_GAFR2_L_VAL 0x20000000
105#define CONFIG_SYS_GAFR2_U_VAL 0x00000000
106
107/*
108 * Serial port
109 */
110
111#define CONFIG_PXA_SERIAL
112#define CONFIG_FFUART
113#define CONFIG_CONS_INDEX 3
114
115#define CONFIG_BAUDRATE 115200
116#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 }
117
118#define CONFIG_CMD_IMPORTENV 1
119#define CONFIG_CMD_LOADB
120#define CONFIG_CMD_SOURCE
121#define CONFIG_CMD_RUN
122#define CONFIG_CMD_IMI
123
124#define CONFIG_FIT
125#define CONFIG_SETUP_MEMORY_TAGS
126#define CONFIG_CMDLINE_TAG
127#define CONFIG_INITRD_TAG
128
129/* Monitor Command Prompt */
130#define CONFIG_SYS_PROMPT "> "
131#define CONFIG_SYS_HUSH_PARSER
132#define CONFIG_SYS_PROMPT_HUSH_PS2 "$ "
133
134/* Console I/O Buffer Size */
135#define CONFIG_SYS_CBSIZE 256
136
137/* Print Buffer Size */
138#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
139 sizeof(CONFIG_SYS_PROMPT) + 16)
140
141#define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
142
Lukasz Daleka33fada2012-11-29 15:55:16 +0100143#define CONFIG_SYS_CONSOLE_IS_IN_ENV
144#define CONFIG_USB_DEV_PULLUP_GPIO 33
145/* USB VBUS GPIO 3 */
146
147#define CONFIG_CMD_NET
148#define CONFIG_CMD_PING
149
150#define CONFIG_BOOTDELAY 2
151#define CONFIG_BOOTCOMMAND \
152 "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
153 "if bootp ; then setenv downloaded 1 ; fi ; done ; " \
154 "source :script ; " \
155 "bootm ; "
156
157#define CONFIG_USB_GADGET_PXA2XX
158#define CONFIG_USB_ETHER
159#define CONFIG_USB_ETH_SUBSET
160
161#define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01"
162#define CONFIG_USBNET_HOST_ADDR "de:ad:be:ef:00:02"
163#define CONFIG_EXTRA_ENV_SETTINGS \
164 "stdin=serial\0" \
165 "stdout=serial\0" \
166 "stderr=serial\0"
167
Łukasz Dałek34cda7a2012-10-15 07:46:54 +0000168#endif /* __CONFIG_H */