blob: 1af53834f757916f4f0339445a069bb23e43de85 [file] [log] [blame]
Anatolij Gustschin4387cf12012-08-31 01:29:57 +00001/*
2 * (C) Copyright 2012
3 * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
4 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02005 * SPDX-License-Identifier: GPL-2.0+
Anatolij Gustschin4387cf12012-08-31 01:29:57 +00006 */
7
8/*
9 * Valid values for CONFIG_SYS_TEXT_BASE are:
10 * 0xFC000000 boot low boot high (standard configuration)
11 * 0x00100000 boot from RAM (for testing only)
12 */
13#ifndef CONFIG_SYS_TEXT_BASE
14#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */
15#endif
16
17/* Board specific flash config */
18#define CONFIG_SYS_FLASH_BASE 0xfc000000
19#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */
20/* max number of sectors on one chip */
21#define CONFIG_SYS_MAX_FLASH_SECT 512
22
23/*
24 * Include common defines for all ifm boards
25 */
26#include "o2dnt-common.h"
27
28/*
29 * GPIO configuration:
30 * CS1 SDRAM activate + no CAN + no PCI
31 */
32#define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004
33
34/* Other board specific configs */
35#define CONFIG_SYS_BOOTCS_CFG 0x00057d01
36#define CONFIG_SYS_RESET_ADDRESS 0xfc000000
37
38#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
39#define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */
40
41/* Use redundant environment */
42#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
43#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
44
45#define CONFIG_BOARD_NAME "o2d300"
46#define CONFIG_BOARD_BOOTCMD "run dhcp_boot"
47#define CONFIG_BOARD_MEM_LIMIT xstr(126)
48#define BOARD_POST_CRC32_END xstr(0x02000000)
49
50#define CONFIG_EXTRA_ENV_SETTINGS \
51 CONFIG_IFM_DEFAULT_ENV_SETTINGS \
52 CONFIG_IFM_DEFAULT_ENV_OLD \
53 CONFIG_IFM_DEFAULT_ENV_NEW \
54 "autoload=no\0" \
55 "dhcp_boot=run dhcpcmd;run flash_mtd\0" \
56 "flash_mtd=run mtd_args addip addmem;" \
57 "bootm ${kernel_addr}\0" \
58 "mtd_args=setenv bootargs root=/dev/mtdblock4 " \
59 "rw rootfstype=cramfs\0" \
60 "linbot=fc080000\0" \
61 "lintop=fc17ffff\0" \
62 "rambot=fc180000\0" \
63 "ramtop=fc57ffff\0" \
64 "jffbot=fc580000\0" \
65 "jfftop=fd39ffff\0" \
66 "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \
67 "ubotop=fc03ffff\0" \
68 "halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0" \
69 "halbot=fd3a0000\0" \
70 "haltop=fdf9ffff\0" \
71 "progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};" \
72 "cp.b ${fileaddr} ${halbot} ${filesize}\0" \
73 "kernel_addr=0xfc060000\0" \
74 "ramdisk_addr=0xfc160000\0" \
75 "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \
76 "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" \
77 "netretry=once\0" \
78 "protcmd=protect on ${linbot} ${lintop};" \
79 "protect on ${rambot} ${ramtop}\0" \
80 "o2derror=def_env\0" \
81 "sensorType=O2D300AA\0"