blob: 2b640e0450e31191e3f12f1b51234a3e8bcbc124 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Shengzhou Liu48c6f322014-11-24 17:11:56 +08002/**
3 * Copyright 2014 Freescale Semiconductor
4 *
Shengzhou Liu48c6f322014-11-24 17:11:56 +08005 * Freescale T1024RDB board-specific CPLD controlling supports.
6 *
7 * The following macros need to be defined:
8 */
9
10#include <common.h>
11#include <command.h>
12#include <asm/io.h>
13#include "cpld.h"
14
15u8 cpld_read(unsigned int reg)
16{
17 void *p = (void *)CONFIG_SYS_CPLD_BASE;
18
19 return in_8(p + reg);
20}
21
22void cpld_write(unsigned int reg, u8 value)
23{
24 void *p = (void *)CONFIG_SYS_CPLD_BASE;
25
26 out_8(p + reg, value);
27}
28
29/**
30 * Set the boot bank to the alternate bank
31 */
32void cpld_set_altbank(void)
33{
34 u8 reg = CPLD_READ(flash_csr);
35
36 reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_ALTBANK;
37
38 CPLD_WRITE(flash_csr, reg);
39 CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET);
40}
41
42/**
43 * Set the boot bank to the default bank
44 */
45void cpld_set_defbank(void)
46{
47 u8 reg = CPLD_READ(flash_csr);
48
49 reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_DFLTBANK;
50
51 CPLD_WRITE(flash_csr, reg);
52 CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET);
53}
54
55static void cpld_dump_regs(void)
56{
57 printf("cpld_ver = 0x%02x\n", CPLD_READ(cpld_ver));
58 printf("cpld_ver_sub = 0x%02x\n", CPLD_READ(cpld_ver_sub));
59 printf("hw_ver = 0x%02x\n", CPLD_READ(hw_ver));
60 printf("sw_ver = 0x%02x\n", CPLD_READ(sw_ver));
61 printf("reset_ctl1 = 0x%02x\n", CPLD_READ(reset_ctl1));
62 printf("reset_ctl2 = 0x%02x\n", CPLD_READ(reset_ctl2));
63 printf("int_status = 0x%02x\n", CPLD_READ(int_status));
64 printf("flash_csr = 0x%02x\n", CPLD_READ(flash_csr));
65 printf("fan_ctl_status = 0x%02x\n", CPLD_READ(fan_ctl_status));
66 printf("led_ctl_status = 0x%02x\n", CPLD_READ(led_ctl_status));
67 printf("sfp_ctl_status = 0x%02x\n", CPLD_READ(sfp_ctl_status));
68 printf("misc_ctl_status = 0x%02x\n", CPLD_READ(misc_ctl_status));
69 printf("boot_override = 0x%02x\n", CPLD_READ(boot_override));
70 printf("boot_config1 = 0x%02x\n", CPLD_READ(boot_config1));
71 printf("boot_config2 = 0x%02x\n", CPLD_READ(boot_config2));
72 putc('\n');
73}
74
75int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
76{
77 int rc = 0;
78
79 if (argc <= 1)
80 return cmd_usage(cmdtp);
81
82 if (strcmp(argv[1], "reset") == 0) {
83 if (strcmp(argv[2], "altbank") == 0)
84 cpld_set_altbank();
85 else
86 cpld_set_defbank();
87 } else if (strcmp(argv[1], "dump") == 0) {
88 cpld_dump_regs();
89 } else {
90 rc = cmd_usage(cmdtp);
91 }
92
93 return rc;
94}
95
96U_BOOT_CMD(
97 cpld, CONFIG_SYS_MAXARGS, 1, do_cpld,
98 "Reset the board or alternate bank",
99 "reset - hard reset to default bank\n"
100 "cpld reset altbank - reset to alternate bank\n"
101 "cpld dump - display the CPLD registers\n"
102 );