blob: 24e1f80474d10b5625a5ebae9604534113e1b1bc [file] [log] [blame]
Sébastien Szymanski77f29292017-03-07 14:33:25 +01001/*
2 * Copyright (C) 2017 Armadeus Systems
3 *
4 * Configuration settings for the OPOS6ULDev board
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#ifndef __OPOS6ULDEV_CONFIG_H
10#define __OPOS6ULDEV_CONFIG_H
11
12#include "mx6_common.h"
13
14#ifdef CONFIG_SPL
15#include "imx6_spl.h"
16
17#ifdef CONFIG_SPL_BUILD
18#undef CONFIG_DM_GPIO
19#undef CONFIG_DM_MMC
Fabio Estevamc46305a2017-10-20 12:17:03 -020020#undef CONFIG_BLK
Sébastien Szymanski77f29292017-03-07 14:33:25 +010021
22#define CONFIG_MXC_UART_BASE UART1_BASE
23#endif
24#endif
25
26/* Size of malloc() pool */
27#define CONFIG_SYS_MALLOC_LEN (16 << 20)
28
29/* Miscellaneous configurable options */
30#define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR
31
32/* Physical Memory Map */
33#define CONFIG_NR_DRAM_BANKS 1
34#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
35#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
36#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
37#define CONFIG_SYS_INIT_SP_OFFSET \
38 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
39#define CONFIG_SYS_INIT_SP_ADDR \
40 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
41
42/* MMC */
43#define CONFIG_SYS_FSL_ESDHC_ADDR 0
44#define CONFIG_SUPPORT_EMMC_BOOT
45
46/* USB */
47#ifdef CONFIG_USB_EHCI_MX6
48#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
49#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
50#define CONFIG_MXC_USB_FLAGS 0
51#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
Sébastien Szymanski77f29292017-03-07 14:33:25 +010052#endif
53
54/* Ethernet */
55#ifdef CONFIG_FEC_MXC
56#define IMX_FEC_BASE ENET_BASE_ADDR
57#define CONFIG_FEC_MXC_PHYADDR 0x1
58#define CONFIG_FEC_XCV_TYPE RMII
59#define CONFIG_ETHPRIME "FEC"
60#define CONFIG_MII
61#endif
62
63/* LCD */
64#ifdef CONFIG_VIDEO
65#define CONFIG_VIDEO_LOGO
66#define CONFIG_SPLASH_SCREEN
67#define CONFIG_SPLASH_SCREEN_ALIGN
68#define CONFIG_SPLASH_SOURCE
69#define CONFIG_VIDEO_BMP_RLE8
70#define CONFIG_VIDEO_BMP_LOGO
Sébastien Szymanski77f29292017-03-07 14:33:25 +010071#define CONFIG_BMP_16BPP
72#define CONFIG_VIDEO_MXS
73#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
74#endif
75
76/* Environment is stored in the eMMC boot partition */
Sébastien Szymanski77f29292017-03-07 14:33:25 +010077#define CONFIG_SYS_MMC_ENV_DEV 0
78#define CONFIG_SYS_MMC_ENV_PART 1
79#define CONFIG_ENV_SIZE (10 * 1024)
80#define CONFIG_ENV_OFFSET (1024 * 1024) /* 1 MB */
81#define CONFIG_ENV_OFFSET_REDUND (1536 * 1024) /* 512KB from CONFIG_ENV_OFFSET */
82
83#define CONFIG_ENV_VERSION 100
84#define CONFIG_BOARD_NAME opos6ul
85#define ACFG_CONSOLE_DEV ttymxc0
86#define CONFIG_SYS_AUTOLOAD "no"
87#define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root"
Sébastien Szymanski77f29292017-03-07 14:33:25 +010088#define CONFIG_PREBOOT "run check_env"
89#define CONFIG_BOOTCOMMAND "run emmcboot"
90
91#define CONFIG_EXTRA_ENV_SETTINGS \
92 "env_version=" __stringify(CONFIG_ENV_VERSION) "\0" \
93 "consoledev=" __stringify(ACFG_CONSOLE_DEV) "\0" \
94 "board_name=" __stringify(CONFIG_BOARD_NAME) "\0" \
95 "fdt_addr=0x88000000\0" \
96 "fdt_high=0xffffffff\0" \
97 "fdt_name=" __stringify(CONFIG_BOARD_NAME) "dev\0" \
98 "initrd_high=0xffffffff\0" \
99 "ip_dyn=yes\0" \
100 "stdin=serial\0" \
101 "stdout=serial\0" \
102 "stderr=serial\0" \
103 "mmcdev=0\0" \
104 "mmcpart=2\0" \
105 "mmcroot=/dev/mmcblk0p2 ro\0" \
106 "mmcrootfstype=ext4 rootwait\0" \
107 "kernelimg=" __stringify(CONFIG_BOARD_NAME) "-linux.bin\0" \
108 "videomode=video=ctfb:x:800,y:480,depth:18,pclk:33033,le:96,ri:96,up:20,lo:21,hs:64,vs:4,sync:0,vmode:0\0" \
109 "check_env=if test -n ${flash_env_version}; " \
110 "then env default env_version; " \
111 "else env set flash_env_version ${env_version}; env save; " \
112 "fi; " \
113 "if itest ${flash_env_version} != ${env_version}; then " \
114 "echo \"*** Warning - Environment version" \
115 " change suggests: run flash_reset_env; reset\"; " \
116 "env default flash_reset_env; " \
117 "else exit; fi; \0" \
118 "flash_reset_env=env default -f -a && saveenv && " \
119 "echo Environment variables erased!\0" \
120 "download_uboot_spl=tftpboot ${loadaddr} ${board_name}-u-boot.spl\0" \
121 "flash_uboot_spl=" \
122 "if mmc dev 0 1; then " \
123 "setexpr sz ${filesize} / 0x200; " \
124 "setexpr sz ${sz} + 1; " \
125 "if mmc write ${loadaddr} 0x2 ${sz}; then " \
126 "echo Flashing of U-boot SPL succeed; " \
127 "else echo Flashing of U-boot SPL failed; " \
128 "fi; " \
129 "fi;\0" \
130 "download_uboot_img=tftpboot ${loadaddr} ${board_name}-u-boot.img\0" \
131 "flash_uboot_img=" \
132 "if mmc dev 0 1; then " \
133 "setexpr sz ${filesize} / 0x200; " \
134 "setexpr sz ${sz} + 1; " \
135 "if mmc write ${loadaddr} 0x8a ${sz}; then " \
136 "echo Flashing of U-boot image succeed; " \
137 "else echo Flashing of U-boot image failed; " \
138 "fi; " \
139 "fi;\0" \
140 "update_uboot=run download_uboot_spl flash_uboot_spl " \
141 "download_uboot_img flash_uboot_img\0" \
142 "download_kernel=tftpboot ${loadaddr} ${kernelimg}\0" \
143 "flash_kernel=" \
144 "if ext4write mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${kernelimg} ${filesize}; then " \
145 "echo kernel update succeed; " \
146 "else echo kernel update failed; " \
147 "fi;\0" \
148 "update_kernel=run download_kernel flash_kernel\0" \
149 "download_dtb=tftpboot ${fdt_addr} imx6ul-${fdt_name}.dtb\0" \
150 "flash_dtb=" \
151 "if ext4write mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/imx6ul-${fdt_name}.dtb ${filesize}; then " \
152 "echo dtb update succeed; " \
153 "else echo dtb update in failed; " \
154 "fi;\0" \
155 "update_dtb=run download_dtb flash_dtb\0" \
156 "download_rootfs=tftpboot ${loadaddr} ${board_name}-rootfs.ext4\0" \
157 "flash_rootfs=" \
158 "if mmc dev 0 0; then " \
159 "setexpr nbblocks ${filesize} / 0x200; " \
160 "setexpr nbblocks ${nbblocks} + 1; " \
161 "if mmc write ${loadaddr} 0x40800 ${nbblocks}; then " \
162 "echo Flashing of rootfs image succeed; " \
163 "else echo Flashing of rootfs image failed; " \
164 "fi; " \
165 "fi;\0" \
166 "update_rootfs=run download_rootfs flash_rootfs\0" \
167 "flash_failsafe=" \
168 "if mmc dev 0 0; then " \
169 "setexpr nbblocks ${filesize} / 0x200; " \
170 "setexpr nbblocks ${nbblocks} + 1; " \
171 "if mmc write ${loadaddr} 0x800 ${nbblocks}; then " \
172 "echo Flashing of rootfs image in failsafe partition succeed; " \
173 "else echo Flashing of rootfs image in failsafe partition failed; " \
174 "fi; " \
175 "fi;\0" \
176 "update_failsafe=run download_rootfs flash_failsafe\0" \
177 "download_userdata=tftpboot ${loadaddr} ${board_name}-user_data.ext4\0" \
178 "flash_userdata=" \
179 "if mmc dev 0 0; then " \
180 "setexpr nbblocks ${filesize} / 0x200; " \
181 "setexpr nbblocks ${nbblocks} + 1; " \
182 "if mmc write ${loadaddr} 0 ${nbblocks}; then " \
183 "echo Flashing of user_data image succeed; " \
184 "else echo Flashing of user_data image failed; " \
185 "fi; " \
186 "fi;\0" \
187 "update_userdata=run download_userdata flash_userdata; mmc rescan\0" \
188 "erase_userdata=" \
189 "if mmc dev 0 0; then " \
190 "echo Erasing eMMC User Data partition, no way out...; " \
191 "mw ${loadaddr} 0 0x200000; " \
192 "mmc write ${loadaddr} 0 0x1000; " \
193 "mmc write ${loadaddr} 0x800 0x1000; " \
194 "mmc write ${loadaddr} 0x40800 0x1000; " \
195 "mmc write ${loadaddr} 0x440800 0x1000; " \
196 "fi;" \
197 "mmc rescan\0" \
198 "update_all=run update_rootfs update_uboot\0" \
199 "initargs=setenv bootargs console=${consoledev},${baudrate} ${extrabootargs}\0" \
200 "addipargs=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \
201 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
202 "addmmcargs=setenv bootargs ${bootargs} root=${mmcroot} " \
203 "rootfstype=${mmcrootfstype}\0" \
204 "emmcboot=run initargs; run addmmcargs; " \
205 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${kernelimg} && " \
206 "load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/imx6ul-${fdt_name}.dtb && " \
207 "bootz ${loadaddr} - ${fdt_addr};\0" \
208 "emmcsafeboot=setenv mmcpart 1; setenv mmcroot /dev/mmcblk0p1 ro; run emmcboot;\0" \
209 "addnfsargs=setenv bootargs ${bootargs} root=/dev/nfs rw " \
210 "nfsroot=${serverip}:${rootpath}\0" \
211 "nfsboot=run initargs; run addnfsargs addipargs; " \
212 "nfs ${loadaddr} ${serverip}:${rootpath}/boot/${kernelimg} && " \
213 "nfs ${fdt_addr} ${serverip}:${rootpath}/boot/imx6ul-${fdt_name}.dtb && " \
214 "bootz ${loadaddr} - ${fdt_addr};\0"
215
216#endif /* __OPOS6ULDEV_CONFIG_H */