blob: e3feef849c33ce7b97d7f9680fc19e40dfe79377 [file] [log] [blame]
wdenk63f34912004-01-02 15:01:32 +00001/*
2 * rtl8139.c : U-Boot driver for the RealTek RTL8139
3 *
4 * Masami Komiya (mkomiya@sonare.it)
5 *
6 * Most part is taken from rtl8139.c of etherboot
7 *
8 */
9
10/* rtl8139.c - etherboot driver for the Realtek 8139 chipset
11
12 ported from the linux driver written by Donald Becker
13 by Rainer Bawidamann (Rainer.Bawidamann@informatik.uni-ulm.de) 1999
14
15 This software may be used and distributed according to the terms
16 of the GNU Public License, incorporated herein by reference.
17
18 changes to the original driver:
19 - removed support for interrupts, switching to polling mode (yuck!)
20 - removed support for the 8129 chip (external MII)
21
22*/
23
24/*********************************************************************/
25/* Revision History */
26/*********************************************************************/
27
28/*
29 28 Dec 2002 ken_yap@users.sourceforge.net (Ken Yap)
30 Put in virt_to_bus calls to allow Etherboot relocation.
31
32 06 Apr 2001 ken_yap@users.sourceforge.net (Ken Yap)
33 Following email from Hyun-Joon Cha, added a disable routine, otherwise
34 NIC remains live and can crash the kernel later.
35
36 4 Feb 2000 espenlaub@informatik.uni-ulm.de (Klaus Espenlaub)
37 Shuffled things around, removed the leftovers from the 8129 support
38 that was in the Linux driver and added a bit more 8139 definitions.
39 Moved the 8K receive buffer to a fixed, available address outside the
40 0x98000-0x9ffff range. This is a bit of a hack, but currently the only
41 way to make room for the Etherboot features that need substantial amounts
42 of code like the ANSI console support. Currently the buffer is just below
43 0x10000, so this even conforms to the tagged boot image specification,
44 which reserves the ranges 0x00000-0x10000 and 0x98000-0xA0000. My
45 interpretation of this "reserved" is that Etherboot may do whatever it
46 likes, as long as its environment is kept intact (like the BIOS
wdenkb6e4c402004-01-02 16:05:07 +000047 variables). Hopefully fixed rtl_poll() once and for all. The symptoms
wdenk63f34912004-01-02 15:01:32 +000048 were that if Etherboot was left at the boot menu for several minutes, the
49 first eth_poll failed. Seems like I am the only person who does this.
50 First of all I fixed the debugging code and then set out for a long bug
51 hunting session. It took me about a week full time work - poking around
52 various places in the driver, reading Don Becker's and Jeff Garzik's Linux
53 driver and even the FreeBSD driver (what a piece of crap!) - and
54 eventually spotted the nasty thing: the transmit routine was acknowledging
55 each and every interrupt pending, including the RxOverrun and RxFIFIOver
wdenkb6e4c402004-01-02 16:05:07 +000056 interrupts. This confused the RTL8139 thoroughly. It destroyed the
wdenk63f34912004-01-02 15:01:32 +000057 Rx ring contents by dumping the 2K FIFO contents right where we wanted to
58 get the next packet. Oh well, what fun.
59
wdenkb6e4c402004-01-02 16:05:07 +000060 18 Jan 2000 mdc@thinguin.org (Marty Connor)
wdenk63f34912004-01-02 15:01:32 +000061 Drastically simplified error handling. Basically, if any error
62 in transmission or reception occurs, the card is reset.
63 Also, pointed all transmit descriptors to the same buffer to
wdenkb6e4c402004-01-02 16:05:07 +000064 save buffer space. This should decrease driver size and avoid
wdenk63f34912004-01-02 15:01:32 +000065 corruption because of exceeding 32K during runtime.
66
wdenkb6e4c402004-01-02 16:05:07 +000067 28 Jul 1999 (Matthias Meixner - meixner@rbg.informatik.tu-darmstadt.de)
wdenk63f34912004-01-02 15:01:32 +000068 rtl_poll was quite broken: it used the RxOK interrupt flag instead
69 of the RxBufferEmpty flag which often resulted in very bad
70 transmission performace - below 1kBytes/s.
71
72*/
73
74#include <common.h>
75#include <malloc.h>
76#include <net.h>
Ben Warren0b252f52008-08-31 21:41:08 -070077#include <netdev.h>
wdenk63f34912004-01-02 15:01:32 +000078#include <asm/io.h>
79#include <pci.h>
80
Shinya Kuribayashid1276c72008-01-16 16:11:14 +090081#define RTL_TIMEOUT 100000
wdenk63f34912004-01-02 15:01:32 +000082
83#define ETH_FRAME_LEN 1514
84#define ETH_ALEN 6
85#define ETH_ZLEN 60
86
87/* PCI Tuning Parameters
88 Threshold is bytes transferred to chip before transmission starts. */
wdenkb6e4c402004-01-02 16:05:07 +000089#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
90#define RX_FIFO_THRESH 4 /* Rx buffer level before first PCI xfer. */
91#define RX_DMA_BURST 4 /* Maximum PCI burst, '4' is 256 bytes */
92#define TX_DMA_BURST 4 /* Calculate as 16<<val. */
93#define NUM_TX_DESC 4 /* Number of Tx descriptor registers. */
wdenk63f34912004-01-02 15:01:32 +000094#define TX_BUF_SIZE ETH_FRAME_LEN /* FCS is added by the chip */
95#define RX_BUF_LEN_IDX 0 /* 0, 1, 2 is allowed - 8,16,32K rx buffer */
96#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
97
Wolfgang Denkecc6aa82011-11-05 05:13:03 +000098#define DEBUG_TX 0 /* set to 1 to enable debug code */
99#define DEBUG_RX 0 /* set to 1 to enable debug code */
wdenk63f34912004-01-02 15:01:32 +0000100
wdenkb6e4c402004-01-02 16:05:07 +0000101#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
102#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
wdenk63f34912004-01-02 15:01:32 +0000103
104/* Symbolic offsets to registers. */
105enum RTL8139_registers {
106 MAC0=0, /* Ethernet hardware address. */
107 MAR0=8, /* Multicast filter. */
108 TxStatus0=0x10, /* Transmit status (four 32bit registers). */
109 TxAddr0=0x20, /* Tx descriptors (also four 32bit). */
110 RxBuf=0x30, RxEarlyCnt=0x34, RxEarlyStatus=0x36,
111 ChipCmd=0x37, RxBufPtr=0x38, RxBufAddr=0x3A,
112 IntrMask=0x3C, IntrStatus=0x3E,
113 TxConfig=0x40, RxConfig=0x44,
114 Timer=0x48, /* general-purpose counter. */
115 RxMissed=0x4C, /* 24 bits valid, write clears. */
116 Cfg9346=0x50, Config0=0x51, Config1=0x52,
117 TimerIntrReg=0x54, /* intr if gp counter reaches this value */
118 MediaStatus=0x58,
119 Config3=0x59,
120 MultiIntr=0x5C,
121 RevisionID=0x5E, /* revision of the RTL8139 chip */
122 TxSummary=0x60,
123 MII_BMCR=0x62, MII_BMSR=0x64, NWayAdvert=0x66, NWayLPAR=0x68,
124 NWayExpansion=0x6A,
125 DisconnectCnt=0x6C, FalseCarrierCnt=0x6E,
126 NWayTestReg=0x70,
127 RxCnt=0x72, /* packet received counter */
128 CSCR=0x74, /* chip status and configuration register */
129 PhyParm1=0x78,TwisterParm=0x7c,PhyParm2=0x80, /* undocumented */
130 /* from 0x84 onwards are a number of power management/wakeup frame
131 * definitions we will probably never need to know about. */
132};
133
134enum ChipCmdBits {
135 CmdReset=0x10, CmdRxEnb=0x08, CmdTxEnb=0x04, RxBufEmpty=0x01, };
136
137/* Interrupt register bits, using my own meaningful names. */
138enum IntrStatusBits {
139 PCIErr=0x8000, PCSTimeout=0x4000, CableLenChange= 0x2000,
140 RxFIFOOver=0x40, RxUnderrun=0x20, RxOverflow=0x10,
141 TxErr=0x08, TxOK=0x04, RxErr=0x02, RxOK=0x01,
142};
143enum TxStatusBits {
144 TxHostOwns=0x2000, TxUnderrun=0x4000, TxStatOK=0x8000,
145 TxOutOfWindow=0x20000000, TxAborted=0x40000000,
146 TxCarrierLost=0x80000000,
147};
148enum RxStatusBits {
149 RxMulticast=0x8000, RxPhysical=0x4000, RxBroadcast=0x2000,
150 RxBadSymbol=0x0020, RxRunt=0x0010, RxTooLong=0x0008, RxCRCErr=0x0004,
151 RxBadAlign=0x0002, RxStatusOK=0x0001,
152};
153
154enum MediaStatusBits {
155 MSRTxFlowEnable=0x80, MSRRxFlowEnable=0x40, MSRSpeed10=0x08,
156 MSRLinkFail=0x04, MSRRxPauseFlag=0x02, MSRTxPauseFlag=0x01,
157};
158
159enum MIIBMCRBits {
160 BMCRReset=0x8000, BMCRSpeed100=0x2000, BMCRNWayEnable=0x1000,
161 BMCRRestartNWay=0x0200, BMCRDuplex=0x0100,
162};
163
164enum CSCRBits {
165 CSCR_LinkOKBit=0x0400, CSCR_LinkChangeBit=0x0800,
166 CSCR_LinkStatusBits=0x0f000, CSCR_LinkDownOffCmd=0x003c0,
167 CSCR_LinkDownCmd=0x0f3c0,
168};
169
170/* Bits in RxConfig. */
171enum rx_mode_bits {
172 RxCfgWrap=0x80,
173 AcceptErr=0x20, AcceptRunt=0x10, AcceptBroadcast=0x08,
174 AcceptMulticast=0x04, AcceptMyPhys=0x02, AcceptAllPhys=0x01,
175};
176
177static int ioaddr;
178static unsigned int cur_rx,cur_tx;
179
180/* The RTL8139 can only transmit from a contiguous, aligned memory block. */
181static unsigned char tx_buffer[TX_BUF_SIZE] __attribute__((aligned(4)));
182static unsigned char rx_ring[RX_BUF_LEN+16] __attribute__((aligned(4)));
183
184static int rtl8139_probe(struct eth_device *dev, bd_t *bis);
185static int read_eeprom(int location, int addr_len);
186static void rtl_reset(struct eth_device *dev);
187static int rtl_transmit(struct eth_device *dev, volatile void *packet, int length);
188static int rtl_poll(struct eth_device *dev);
189static void rtl_disable(struct eth_device *dev);
David Updegraff53a5c422007-06-11 10:41:07 -0500190#ifdef CONFIG_MCAST_TFTP/* This driver already accepts all b/mcast */
Wolfgang Denk85eb5ca2007-08-14 09:47:27 +0200191static int rtl_bcast_addr (struct eth_device *dev, u8 bcast_mac, u8 set)
192{
193 return (0);
194}
David Updegraff53a5c422007-06-11 10:41:07 -0500195#endif
wdenk63f34912004-01-02 15:01:32 +0000196
197static struct pci_device_id supported[] = {
198 {PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139},
Jin Zhengxiongda012ab2006-06-28 08:43:56 -0500199 {PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_8139},
wdenk63f34912004-01-02 15:01:32 +0000200 {}
201};
202
203int rtl8139_initialize(bd_t *bis)
204{
205 pci_dev_t devno;
206 int card_number = 0;
207 struct eth_device *dev;
208 u32 iobase;
209 int idx=0;
210
211 while(1){
212 /* Find RTL8139 */
213 if ((devno = pci_find_devices(supported, idx++)) < 0)
214 break;
215
216 pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
217 iobase &= ~0xf;
218
219 debug ("rtl8139: REALTEK RTL8139 @0x%x\n", iobase);
220
221 dev = (struct eth_device *)malloc(sizeof *dev);
Nobuhiro Iwamatsu986f7272010-10-19 14:03:39 +0900222 if (!dev) {
223 printf("Can not allocate memory of rtl8139\n");
224 break;
225 }
226 memset(dev, 0, sizeof(*dev));
wdenk63f34912004-01-02 15:01:32 +0000227
228 sprintf (dev->name, "RTL8139#%d", card_number);
229
230 dev->priv = (void *) devno;
231 dev->iobase = (int)bus_to_phys(iobase);
232 dev->init = rtl8139_probe;
233 dev->halt = rtl_disable;
234 dev->send = rtl_transmit;
235 dev->recv = rtl_poll;
David Updegraff53a5c422007-06-11 10:41:07 -0500236#ifdef CONFIG_MCAST_TFTP
237 dev->mcast = rtl_bcast_addr;
238#endif
wdenk63f34912004-01-02 15:01:32 +0000239
240 eth_register (dev);
241
242 card_number++;
243
244 pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x20);
245
246 udelay (10 * 1000);
247 }
248
249 return card_number;
250}
251
252static int rtl8139_probe(struct eth_device *dev, bd_t *bis)
253{
254 int i;
wdenk63f34912004-01-02 15:01:32 +0000255 int addr_len;
256 unsigned short *ap = (unsigned short *)dev->enetaddr;
257
258 ioaddr = dev->iobase;
259
260 /* Bring the chip out of low-power mode. */
261 outb(0x00, ioaddr + Config1);
262
263 addr_len = read_eeprom(0,8) == 0x8129 ? 8 : 6;
264 for (i = 0; i < 3; i++)
wdenk756f5862005-04-03 15:51:42 +0000265 *ap++ = le16_to_cpu (read_eeprom(i + 7, addr_len));
wdenk63f34912004-01-02 15:01:32 +0000266
wdenk63f34912004-01-02 15:01:32 +0000267 rtl_reset(dev);
268
269 if (inb(ioaddr + MediaStatus) & MSRLinkFail) {
270 printf("Cable not connected or other link failure\n");
Ben Warren422b1a02008-01-09 18:15:53 -0500271 return -1 ;
wdenk63f34912004-01-02 15:01:32 +0000272 }
273
Ben Warren422b1a02008-01-09 18:15:53 -0500274 return 0;
wdenk63f34912004-01-02 15:01:32 +0000275}
276
277/* Serial EEPROM section. */
278
279/* EEPROM_Ctrl bits. */
wdenkb6e4c402004-01-02 16:05:07 +0000280#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
281#define EE_CS 0x08 /* EEPROM chip select. */
282#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
283#define EE_WRITE_0 0x00
284#define EE_WRITE_1 0x02
285#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
wdenk63f34912004-01-02 15:01:32 +0000286#define EE_ENB (0x80 | EE_CS)
287
288/*
289 Delay between EEPROM clock transitions.
Wolfgang Denk8ed44d92008-10-19 02:35:50 +0200290 No extra delay is needed with 33MHz PCI, but 66MHz may change this.
wdenk63f34912004-01-02 15:01:32 +0000291*/
292
wdenkb6e4c402004-01-02 16:05:07 +0000293#define eeprom_delay() inl(ee_addr)
wdenk63f34912004-01-02 15:01:32 +0000294
295/* The EEPROM commands include the alway-set leading bit. */
wdenkb6e4c402004-01-02 16:05:07 +0000296#define EE_WRITE_CMD (5)
297#define EE_READ_CMD (6)
298#define EE_ERASE_CMD (7)
wdenk63f34912004-01-02 15:01:32 +0000299
300static int read_eeprom(int location, int addr_len)
301{
302 int i;
303 unsigned int retval = 0;
304 long ee_addr = ioaddr + Cfg9346;
305 int read_cmd = location | (EE_READ_CMD << addr_len);
306
307 outb(EE_ENB & ~EE_CS, ee_addr);
308 outb(EE_ENB, ee_addr);
309 eeprom_delay();
310
311 /* Shift the read command bits out. */
312 for (i = 4 + addr_len; i >= 0; i--) {
313 int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
314 outb(EE_ENB | dataval, ee_addr);
315 eeprom_delay();
316 outb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
317 eeprom_delay();
318 }
319 outb(EE_ENB, ee_addr);
320 eeprom_delay();
321
322 for (i = 16; i > 0; i--) {
323 outb(EE_ENB | EE_SHIFT_CLK, ee_addr);
324 eeprom_delay();
325 retval = (retval << 1) | ((inb(ee_addr) & EE_DATA_READ) ? 1 : 0);
326 outb(EE_ENB, ee_addr);
327 eeprom_delay();
328 }
329
330 /* Terminate the EEPROM access. */
331 outb(~EE_CS, ee_addr);
332 eeprom_delay();
333 return retval;
334}
335
336static const unsigned int rtl8139_rx_config =
337 (RX_BUF_LEN_IDX << 11) |
338 (RX_FIFO_THRESH << 13) |
339 (RX_DMA_BURST << 8);
340
341static void set_rx_mode(struct eth_device *dev) {
342 unsigned int mc_filter[2];
343 int rx_mode;
344 /* !IFF_PROMISC */
345 rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
346 mc_filter[1] = mc_filter[0] = 0xffffffff;
347
348 outl(rtl8139_rx_config | rx_mode, ioaddr + RxConfig);
349
350 outl(mc_filter[0], ioaddr + MAR0 + 0);
351 outl(mc_filter[1], ioaddr + MAR0 + 4);
352}
353
354static void rtl_reset(struct eth_device *dev)
355{
356 int i;
357
358 outb(CmdReset, ioaddr + ChipCmd);
359
360 cur_rx = 0;
361 cur_tx = 0;
362
363 /* Give the chip 10ms to finish the reset. */
364 for (i=0; i<100; ++i){
365 if ((inb(ioaddr + ChipCmd) & CmdReset) == 0) break;
366 udelay (100); /* wait 100us */
367 }
368
369
370 for (i = 0; i < ETH_ALEN; i++)
371 outb(dev->enetaddr[i], ioaddr + MAC0 + i);
372
373 /* Must enable Tx/Rx before setting transfer thresholds! */
374 outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
375 outl((RX_FIFO_THRESH<<13) | (RX_BUF_LEN_IDX<<11) | (RX_DMA_BURST<<8),
376 ioaddr + RxConfig); /* accept no frames yet! */
377 outl((TX_DMA_BURST<<8)|0x03000000, ioaddr + TxConfig);
378
379 /* The Linux driver changes Config1 here to use a different LED pattern
380 * for half duplex or full/autodetect duplex (for full/autodetect, the
381 * outputs are TX/RX, Link10/100, FULL, while for half duplex it uses
382 * TX/RX, Link100, Link10). This is messy, because it doesn't match
383 * the inscription on the mounting bracket. It should not be changed
384 * from the configuration EEPROM default, because the card manufacturer
385 * should have set that to match the card. */
386
Wolfgang Denkecc6aa82011-11-05 05:13:03 +0000387 debug_cond(DEBUG_RX,
388 "rx ring address is %lX\n",(unsigned long)rx_ring);
Shinya Kuribayashi96a23672008-01-16 16:12:26 +0900389 flush_cache((unsigned long)rx_ring, RX_BUF_LEN);
wdenk63f34912004-01-02 15:01:32 +0000390 outl(phys_to_bus((int)rx_ring), ioaddr + RxBuf);
391
392 /* If we add multicast support, the MAR0 register would have to be
393 * initialized to 0xffffffffffffffff (two 32 bit accesses). Etherboot
wdenkb6e4c402004-01-02 16:05:07 +0000394 * only needs broadcast (for ARP/RARP/BOOTP/DHCP) and unicast. */
wdenk63f34912004-01-02 15:01:32 +0000395
396 outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
397
398 outl(rtl8139_rx_config, ioaddr + RxConfig);
399
400 /* Start the chip's Tx and Rx process. */
401 outl(0, ioaddr + RxMissed);
402
403 /* set_rx_mode */
404 set_rx_mode(dev);
405
406 /* Disable all known interrupts by setting the interrupt mask. */
407 outw(0, ioaddr + IntrMask);
408}
409
410static int rtl_transmit(struct eth_device *dev, volatile void *packet, int length)
411{
Shinya Kuribayashid1276c72008-01-16 16:11:14 +0900412 unsigned int status;
wdenk63f34912004-01-02 15:01:32 +0000413 unsigned long txstatus;
414 unsigned int len = length;
Shinya Kuribayashid1276c72008-01-16 16:11:14 +0900415 int i = 0;
wdenk63f34912004-01-02 15:01:32 +0000416
417 ioaddr = dev->iobase;
418
419 memcpy((char *)tx_buffer, (char *)packet, (int)length);
420
Wolfgang Denkecc6aa82011-11-05 05:13:03 +0000421 debug_cond(DEBUG_TX, "sending %d bytes\n", len);
wdenk63f34912004-01-02 15:01:32 +0000422
423 /* Note: RTL8139 doesn't auto-pad, send minimum payload (another 4
424 * bytes are sent automatically for the FCS, totalling to 64 bytes). */
425 while (len < ETH_ZLEN) {
426 tx_buffer[len++] = '\0';
427 }
428
Shinya Kuribayashi96a23672008-01-16 16:12:26 +0900429 flush_cache((unsigned long)tx_buffer, length);
wdenk63f34912004-01-02 15:01:32 +0000430 outl(phys_to_bus((int)tx_buffer), ioaddr + TxAddr0 + cur_tx*4);
431 outl(((TX_FIFO_THRESH<<11) & 0x003f0000) | len,
432 ioaddr + TxStatus0 + cur_tx*4);
433
wdenk63f34912004-01-02 15:01:32 +0000434 do {
435 status = inw(ioaddr + IntrStatus);
436 /* Only acknlowledge interrupt sources we can properly handle
437 * here - the RxOverflow/RxFIFOOver MUST be handled in the
wdenkb6e4c402004-01-02 16:05:07 +0000438 * rtl_poll() function. */
wdenk63f34912004-01-02 15:01:32 +0000439 outw(status & (TxOK | TxErr | PCIErr), ioaddr + IntrStatus);
440 if ((status & (TxOK | TxErr | PCIErr)) != 0) break;
Shinya Kuribayashid1276c72008-01-16 16:11:14 +0900441 udelay(10);
442 } while (i++ < RTL_TIMEOUT);
wdenk63f34912004-01-02 15:01:32 +0000443
444 txstatus = inl(ioaddr + TxStatus0 + cur_tx*4);
445
446 if (status & TxOK) {
447 cur_tx = (cur_tx + 1) % NUM_TX_DESC;
Wolfgang Denkecc6aa82011-11-05 05:13:03 +0000448
449 debug_cond(DEBUG_TX,
450 "tx done, status %hX txstatus %lX\n",
451 status, txstatus);
452
wdenk63f34912004-01-02 15:01:32 +0000453 return length;
454 } else {
Wolfgang Denkecc6aa82011-11-05 05:13:03 +0000455
456 debug_cond(DEBUG_TX,
457 "tx timeout/error (%d usecs), status %hX txstatus %lX\n",
458 10*i, status, txstatus);
459
wdenk63f34912004-01-02 15:01:32 +0000460 rtl_reset(dev);
461
462 return 0;
463 }
464}
465
466static int rtl_poll(struct eth_device *dev)
467{
468 unsigned int status;
469 unsigned int ring_offs;
470 unsigned int rx_size, rx_status;
471 int length=0;
472
473 ioaddr = dev->iobase;
474
475 if (inb(ioaddr + ChipCmd) & RxBufEmpty) {
476 return 0;
477 }
478
479 status = inw(ioaddr + IntrStatus);
480 /* See below for the rest of the interrupt acknowledges. */
481 outw(status & ~(RxFIFOOver | RxOverflow | RxOK), ioaddr + IntrStatus);
482
Wolfgang Denkecc6aa82011-11-05 05:13:03 +0000483 debug_cond(DEBUG_RX, "rtl_poll: int %hX ", status);
wdenk63f34912004-01-02 15:01:32 +0000484
485 ring_offs = cur_rx % RX_BUF_LEN;
Shinya Kuribayashi96a23672008-01-16 16:12:26 +0900486 /* ring_offs is guaranteed being 4-byte aligned */
Shinya Kuribayashic2f896b2008-01-16 16:13:31 +0900487 rx_status = le32_to_cpu(*(unsigned int *)(rx_ring + ring_offs));
wdenk63f34912004-01-02 15:01:32 +0000488 rx_size = rx_status >> 16;
489 rx_status &= 0xffff;
490
491 if ((rx_status & (RxBadSymbol|RxRunt|RxTooLong|RxCRCErr|RxBadAlign)) ||
492 (rx_size < ETH_ZLEN) || (rx_size > ETH_FRAME_LEN + 4)) {
493 printf("rx error %hX\n", rx_status);
wdenkb6e4c402004-01-02 16:05:07 +0000494 rtl_reset(dev); /* this clears all interrupts still pending */
wdenk63f34912004-01-02 15:01:32 +0000495 return 0;
496 }
497
498 /* Received a good packet */
499 length = rx_size - 4; /* no one cares about the FCS */
500 if (ring_offs+4+rx_size-4 > RX_BUF_LEN) {
501 int semi_count = RX_BUF_LEN - ring_offs - 4;
502 unsigned char rxdata[RX_BUF_LEN];
503
504 memcpy(rxdata, rx_ring + ring_offs + 4, semi_count);
505 memcpy(&(rxdata[semi_count]), rx_ring, rx_size-4-semi_count);
506
507 NetReceive(rxdata, length);
Wolfgang Denkecc6aa82011-11-05 05:13:03 +0000508 debug_cond(DEBUG_RX, "rx packet %d+%d bytes",
509 semi_count, rx_size-4-semi_count);
wdenk63f34912004-01-02 15:01:32 +0000510 } else {
511 NetReceive(rx_ring + ring_offs + 4, length);
Wolfgang Denkecc6aa82011-11-05 05:13:03 +0000512 debug_cond(DEBUG_RX, "rx packet %d bytes", rx_size-4);
wdenk63f34912004-01-02 15:01:32 +0000513 }
Shinya Kuribayashi96a23672008-01-16 16:12:26 +0900514 flush_cache((unsigned long)rx_ring, RX_BUF_LEN);
wdenk63f34912004-01-02 15:01:32 +0000515
516 cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
517 outw(cur_rx - 16, ioaddr + RxBufPtr);
518 /* See RTL8139 Programming Guide V0.1 for the official handling of
519 * Rx overflow situations. The document itself contains basically no
520 * usable information, except for a few exception handling rules. */
521 outw(status & (RxFIFOOver | RxOverflow | RxOK), ioaddr + IntrStatus);
522 return length;
523}
524
525static void rtl_disable(struct eth_device *dev)
526{
527 int i;
528
wdenkb6e4c402004-01-02 16:05:07 +0000529 ioaddr = dev->iobase;
530
wdenk63f34912004-01-02 15:01:32 +0000531 /* reset the chip */
532 outb(CmdReset, ioaddr + ChipCmd);
533
534 /* Give the chip 10ms to finish the reset. */
535 for (i=0; i<100; ++i){
536 if ((inb(ioaddr + ChipCmd) & CmdReset) == 0) break;
537 udelay (100); /* wait 100us */
538 }
539}