blob: a5660d61a96e9182a6d178ed1e042b56790a62c0 [file] [log] [blame]
Hans de Goede53ab4af2015-04-15 19:03:49 +02001/*
2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
Hans de Goede53ab4af2015-04-15 19:03:49 +020019 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun6i-a31.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/pinctrl/sun4i-a10.h>
49
50/ {
51 model = "Mele M9 / A1000G Quad top set box";
52 compatible = "mele,m9", "allwinner,sun6i-a31";
53
54 aliases {
55 serial0 = &uart0;
56 };
57
58 chosen {
59 stdout-path = "serial0:115200n8";
60 };
61
62 leds {
63 compatible = "gpio-leds";
64 pinctrl-names = "default";
65 pinctrl-0 = <&led_pins_m9>;
66
67 blue {
68 label = "m9:blue:usr";
69 gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
70 };
71 };
72};
73
74&ehci0 {
75 status = "okay";
76};
77
78&ehci1 {
79 status = "okay";
80};
81
82&gmac {
83 pinctrl-names = "default";
84 pinctrl-0 = <&gmac_pins_mii_a>;
85 phy = <&phy1>;
86 phy-mode = "mii";
87 status = "okay";
88
89 phy1: ethernet-phy@1 {
90 reg = <1>;
91 };
92};
93
94&ir {
95 pinctrl-names = "default";
96 pinctrl-0 = <&ir_pins_a>;
97 status = "okay";
98};
99
100&mmc0 {
101 pinctrl-names = "default";
102 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
103 vmmc-supply = <&reg_vcc3v3>;
104 bus-width = <4>;
105 cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
106 cd-inverted;
107 status = "okay";
108};
109
110&pio {
111 led_pins_m9: led_pins@0 {
112 allwinner,pins = "PH13";
113 allwinner,function = "gpio_out";
114 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
115 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
116 };
117
118 mmc0_cd_pin_m9: mmc0_cd_pin@0 {
119 allwinner,pins = "PH22";
120 allwinner,function = "gpio_in";
121 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
122 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
123 };
124
125 usb1_vbus_pin_m9: usb1_vbus_pin@0 {
126 allwinner,pins = "PC27";
127 allwinner,function = "gpio_out";
128 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
129 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
130 };
131};
132
133&reg_usb1_vbus {
134 pinctrl-names = "default";
135 pinctrl-0 = <&usb1_vbus_pin_m9>;
136 gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
137 status = "okay";
138};
139
140&uart0 {
141 pinctrl-names = "default";
142 pinctrl-0 = <&uart0_pins_a>;
143 status = "okay";
144};
145
146&usbphy {
147 usb1_vbus-supply = <&reg_usb1_vbus>;
148 status = "okay";
149};