blob: 6aec815c712fc1acee3025a13ccbc180371e68ae [file] [log] [blame]
Kumar Gala47d41cc2009-02-05 20:40:57 -06001/*
Poonam Aggrwalb8cdd012011-01-13 21:39:27 +05302 * Copyright 2009-2011 Freescale Semiconductor, Inc.
Kumar Gala47d41cc2009-02-05 20:40:57 -06003 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02004 * SPDX-License-Identifier: GPL-2.0+
Kumar Gala47d41cc2009-02-05 20:40:57 -06005 */
6
7#ifndef _ASM_CONFIG_H_
8#define _ASM_CONFIG_H_
9
Kumar Gala243be8e2011-01-19 03:05:26 -060010#ifdef CONFIG_MPC85xx
11#include <asm/config_mpc85xx.h>
12#endif
13
14#ifdef CONFIG_MPC86xx
15#include <asm/config_mpc86xx.h>
York Sun5614e712013-09-30 09:22:09 -070016#endif
17
18#ifdef CONFIG_MPC83xx
Kumar Gala243be8e2011-01-19 03:05:26 -060019#endif
20
York Sun7ac3cc22012-08-17 09:00:54 +000021#ifndef HWCONFIG_BUFFER_SIZE
22 #define HWCONFIG_BUFFER_SIZE 256
23#endif
24
Mingkai Hu273feaf2011-04-26 16:31:16 +080025/* CONFIG_HARD_SPI triggers SPI bus initialization in PowerPC */
26#if defined(CONFIG_MPC8XXX_SPI) || defined(CONFIG_FSL_ESPI)
27# ifndef CONFIG_HARD_SPI
28# define CONFIG_HARD_SPI
29# endif
30#endif
31
Mike Frysingera16028d2009-11-03 11:35:59 -050032#define CONFIG_LMB
John Rigbyfca43cc2010-10-13 13:57:35 -060033#define CONFIG_SYS_BOOT_RAMDISK_HIGH
34#define CONFIG_SYS_BOOT_GET_CMDLINE
35#define CONFIG_SYS_BOOT_GET_KBD
Mike Frysingera16028d2009-11-03 11:35:59 -050036
Kumar Gala87c90632009-02-05 20:40:58 -060037#ifndef CONFIG_MAX_MEM_MAPPED
Heiko Schocher98f705c2017-06-27 16:49:14 +020038#if defined(CONFIG_E500) || \
York Sund29d17d2011-08-26 11:32:44 -070039 defined(CONFIG_MPC86xx) || \
40 defined(CONFIG_E300)
Kumar Gala87c90632009-02-05 20:40:58 -060041#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
42#else
Stefan Roese2ede8792009-02-11 09:37:12 +010043#define CONFIG_MAX_MEM_MAPPED (256 << 20)
Kumar Gala87c90632009-02-05 20:40:58 -060044#endif
45#endif
46
Peter Tyserf732a752009-07-15 00:01:08 -050047/* Check if boards need to enable FSL DMA engine for SDRAM init */
48#if !defined(CONFIG_FSL_DMA) && defined(CONFIG_DDR_ECC)
49#if (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA)) || \
50 ((defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)) && \
51 !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER))
Peter Tyser017f11f2009-06-30 17:15:40 -050052#define CONFIG_FSL_DMA
Kumar Gala47d41cc2009-02-05 20:40:57 -060053#endif
Peter Tyser017f11f2009-06-30 17:15:40 -050054#endif
55
Peter Tyser5ccd29c2009-10-23 15:55:47 -050056/*
57 * Provide a default boot page translation virtual address that lines up with
58 * Freescale's default e500 reset page.
59 */
60#if (defined(CONFIG_E500) && defined(CONFIG_MP))
61#ifndef CONFIG_BPTR_VIRT_ADDR
62#define CONFIG_BPTR_VIRT_ADDR 0xfffff000
63#endif
64#endif
65
Becky Brucef51cdaf2010-06-17 11:37:20 -050066/* Since so many PPC SOCs have a semi-common LBC, define this here */
67#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \
68 defined(CONFIG_MPC83xx)
Dipen Dudhatd789b5f2011-01-20 16:29:35 +053069#if !defined(CONFIG_FSL_IFC)
Becky Brucef51cdaf2010-06-17 11:37:20 -050070#define CONFIG_FSL_LBC
71#endif
Dipen Dudhatd789b5f2011-01-20 16:29:35 +053072#endif
Becky Brucef51cdaf2010-06-17 11:37:20 -050073
Andy Fleming063c1262011-04-08 02:10:54 -050074/* The TSEC driver uses the PHYLIB infrastructure */
75#ifndef CONFIG_PHYLIB
76#if defined(CONFIG_TSEC_ENET)
Andy Fleming063c1262011-04-08 02:10:54 -050077#include <config_phylib_all_drivers.h>
78#endif /* TSEC_ENET */
79#endif /* !CONFIG_PHYLIB */
80
Kumar Galac916d7c2011-04-13 08:37:44 -050081/* The FMAN driver uses the PHYLIB infrastructure */
Kumar Galac916d7c2011-04-13 08:37:44 -050082
Albert Aribaudf2a37fc2010-08-08 05:17:05 +053083/* All PPC boards must swap IDE bytes */
84#define CONFIG_IDE_SWAP_IO
85
Thomas Chouf27445c2015-11-19 21:48:07 +080086#if defined(CONFIG_DM_SERIAL)
87/*
88 * TODO: Convert this to a clock driver exists that can give us the UART
89 * clock here.
90 */
91#define CONFIG_SYS_NS16550_CLK get_serial_clock()
92#endif
93
Peter Tyser017f11f2009-06-30 17:15:40 -050094#endif /* _ASM_CONFIG_H_ */