Giulio Benetti | 931edc6 | 2020-02-18 20:02:55 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| 2 | /* |
| 3 | * Copyright (C) 2020 |
| 4 | * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> |
| 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | #include "imxrt1020.dtsi" |
| 9 | #include "imxrt1020-evk-u-boot.dtsi" |
| 10 | #include <dt-bindings/pinctrl/pins-imxrt1020.h> |
| 11 | |
| 12 | / { |
| 13 | model = "NXP IMXRT1020-evk board"; |
| 14 | compatible = "fsl,imxrt1020-evk", "fsl,imxrt1020"; |
| 15 | |
| 16 | chosen { |
| 17 | bootargs = "root=/dev/ram"; |
| 18 | stdout-path = "serial0:115200n8"; |
Giulio Benetti | e5d10f4 | 2021-05-13 12:18:35 +0200 | [diff] [blame^] | 19 | tick-timer = &gpt1; |
Giulio Benetti | 931edc6 | 2020-02-18 20:02:55 +0100 | [diff] [blame] | 20 | }; |
| 21 | |
| 22 | memory { |
| 23 | reg = <0x80000000 0x2000000>; |
| 24 | }; |
| 25 | }; |
| 26 | |
| 27 | &lpuart1 { /* console */ |
| 28 | pinctrl-names = "default"; |
| 29 | pinctrl-0 = <&pinctrl_lpuart1>; |
| 30 | status = "okay"; |
| 31 | }; |
| 32 | |
| 33 | &semc { |
| 34 | /* |
| 35 | * Memory configuration from sdram datasheet IS42S16160J-6TLI |
| 36 | */ |
| 37 | fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8 |
| 38 | MUX_CSX0_SDRAM_CS1 |
| 39 | 0 |
| 40 | 0 |
| 41 | 0 |
| 42 | 0>; |
| 43 | fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS |
| 44 | BL_8 |
| 45 | COL_9BITS |
| 46 | CL_3>; |
| 47 | fsl,sdram-timing = /bits/ 8 <0x2 |
| 48 | 0x2 |
| 49 | 0x9 |
| 50 | 0x1 |
| 51 | 0x5 |
| 52 | 0x6 |
| 53 | |
| 54 | 0x20 |
| 55 | 0x09 |
| 56 | 0x01 |
| 57 | 0x00 |
| 58 | |
| 59 | 0x04 |
| 60 | 0x0A |
| 61 | 0x21 |
| 62 | 0x50>; |
| 63 | |
| 64 | bank1: bank@0 { |
| 65 | fsl,base-address = <0x80000000>; |
| 66 | fsl,memory-size = <MEM_SIZE_32M>; |
| 67 | }; |
| 68 | }; |
| 69 | |
| 70 | &iomuxc { |
| 71 | pinctrl-names = "default"; |
| 72 | pinctrl-0 = <&pinctrl_lpuart1>; |
| 73 | |
| 74 | imxrt1020-evk { |
| 75 | pinctrl_lpuart1: lpuart1grp { |
| 76 | fsl,pins = < |
| 77 | MXRT1020_IOMUXC_GPIO_AD_B0_06_LPUART1_TX |
| 78 | 0xf1 |
| 79 | MXRT1020_IOMUXC_GPIO_AD_B0_07_LPUART1_RX |
| 80 | 0xf1 |
| 81 | >; |
| 82 | }; |
| 83 | |
| 84 | pinctrl_semc: semcgrp { |
| 85 | fsl,pins = < |
| 86 | MXRT1020_IOMUXC_GPIO_EMC_00_SEMC_DA00 |
| 87 | 0xf1 /* SEMC_D0 */ |
| 88 | MXRT1020_IOMUXC_GPIO_EMC_01_SEMC_DA01 |
| 89 | 0xf1 /* SEMC_D1 */ |
| 90 | MXRT1020_IOMUXC_GPIO_EMC_02_SEMC_DA02 |
| 91 | 0xf1 /* SEMC_D2 */ |
| 92 | MXRT1020_IOMUXC_GPIO_EMC_03_SEMC_DA03 |
| 93 | 0xf1 /* SEMC_D3 */ |
| 94 | MXRT1020_IOMUXC_GPIO_EMC_04_SEMC_DA04 |
| 95 | 0xf1 /* SEMC_D4 */ |
| 96 | MXRT1020_IOMUXC_GPIO_EMC_05_SEMC_DA05 |
| 97 | 0xf1 /* SEMC_D5 */ |
| 98 | MXRT1020_IOMUXC_GPIO_EMC_06_SEMC_DA06 |
| 99 | 0xf1 /* SEMC_D6 */ |
| 100 | MXRT1020_IOMUXC_GPIO_EMC_07_SEMC_DA07 |
| 101 | 0xf1 /* SEMC_D7 */ |
| 102 | MXRT1020_IOMUXC_GPIO_EMC_08_SEMC_DM00 |
| 103 | 0xf1 /* SEMC_DM0 */ |
| 104 | MXRT1020_IOMUXC_GPIO_EMC_09_SEMC_ADDR00 |
| 105 | 0xf1 /* SEMC_A0 */ |
| 106 | MXRT1020_IOMUXC_GPIO_EMC_10_SEMC_CAS |
| 107 | 0xf1 /* SEMC_CAS */ |
| 108 | MXRT1020_IOMUXC_GPIO_EMC_11_SEMC_RAS |
| 109 | 0xf1 /* SEMC_RAS */ |
| 110 | MXRT1020_IOMUXC_GPIO_EMC_12_SEMC_CS0 |
| 111 | 0xf1 /* SEMC_CS0 */ |
| 112 | MXRT1020_IOMUXC_GPIO_EMC_13_SEMC_BA0 |
| 113 | 0xf1 /* SEMC_BA0 */ |
| 114 | MXRT1020_IOMUXC_GPIO_EMC_14_SEMC_BA1 |
| 115 | 0xf1 /* SEMC_BA1 */ |
| 116 | MXRT1020_IOMUXC_GPIO_EMC_15_SEMC_ADDR10 |
| 117 | 0xf1 /* SEMC_A10 */ |
| 118 | MXRT1020_IOMUXC_GPIO_EMC_16_SEMC_ADDR00 |
| 119 | 0xf1 /* SEMC_A0 */ |
| 120 | MXRT1020_IOMUXC_GPIO_EMC_17_SEMC_ADDR01 |
| 121 | 0xf1 /* SEMC_A1 */ |
| 122 | MXRT1020_IOMUXC_GPIO_EMC_18_SEMC_ADDR02 |
| 123 | 0xf1 /* SEMC_A2 */ |
| 124 | MXRT1020_IOMUXC_GPIO_EMC_19_SEMC_ADDR03 |
| 125 | 0xf1 /* SEMC_A3 */ |
| 126 | MXRT1020_IOMUXC_GPIO_EMC_20_SEMC_ADDR04 |
| 127 | 0xf1 /* SEMC_A4 */ |
| 128 | MXRT1020_IOMUXC_GPIO_EMC_21_SEMC_ADDR05 |
| 129 | 0xf1 /* SEMC_A5 */ |
| 130 | MXRT1020_IOMUXC_GPIO_EMC_22_SEMC_ADDR06 |
| 131 | 0xf1 /* SEMC_A6 */ |
| 132 | MXRT1020_IOMUXC_GPIO_EMC_23_SEMC_ADDR07 |
| 133 | 0xf1 /* SEMC_A7 */ |
| 134 | MXRT1020_IOMUXC_GPIO_EMC_24_SEMC_ADDR08 |
| 135 | 0xf1 /* SEMC_A8 */ |
| 136 | MXRT1020_IOMUXC_GPIO_EMC_25_SEMC_ADDR09 |
| 137 | 0xf1 /* SEMC_A9 */ |
| 138 | MXRT1020_IOMUXC_GPIO_EMC_26_SEMC_ADDR11 |
| 139 | 0xf1 /* SEMC_A11 */ |
| 140 | MXRT1020_IOMUXC_GPIO_EMC_27_SEMC_ADDR12 |
| 141 | 0xf1 /* SEMC_A12 */ |
| 142 | MXRT1020_IOMUXC_GPIO_EMC_28_SEMC_DQS |
| 143 | (IMX_PAD_SION | 0xf1) /* SEMC_DQS */ |
| 144 | MXRT1020_IOMUXC_GPIO_EMC_29_SEMC_CKE |
| 145 | 0xf1 /* SEMC_CKE */ |
| 146 | MXRT1020_IOMUXC_GPIO_EMC_30_SEMC_CLK |
| 147 | 0xf1 /* SEMC_CLK */ |
| 148 | MXRT1020_IOMUXC_GPIO_EMC_31_SEMC_DM01 |
| 149 | 0xf1 /* SEMC_DM01 */ |
| 150 | MXRT1020_IOMUXC_GPIO_EMC_32_SEMC_DATA08 |
| 151 | 0xf1 /* SEMC_D8 */ |
| 152 | MXRT1020_IOMUXC_GPIO_EMC_33_SEMC_DATA09 |
| 153 | 0xf1 /* SEMC_D9 */ |
| 154 | MXRT1020_IOMUXC_GPIO_EMC_34_SEMC_DATA10 |
| 155 | 0xf1 /* SEMC_D10 */ |
| 156 | MXRT1020_IOMUXC_GPIO_EMC_35_SEMC_DATA11 |
| 157 | 0xf1 /* SEMC_D11 */ |
| 158 | MXRT1020_IOMUXC_GPIO_EMC_36_SEMC_DATA12 |
| 159 | 0xf1 /* SEMC_D12 */ |
| 160 | MXRT1020_IOMUXC_GPIO_EMC_37_SEMC_DATA13 |
| 161 | 0xf1 /* SEMC_D13 */ |
| 162 | MXRT1020_IOMUXC_GPIO_EMC_38_SEMC_DATA14 |
| 163 | 0xf1 /* SEMC_D14 */ |
| 164 | MXRT1020_IOMUXC_GPIO_EMC_39_SEMC_DATA15 |
| 165 | 0xf1 /* SEMC_D15 */ |
| 166 | >; |
| 167 | }; |
| 168 | |
| 169 | pinctrl_usdhc0: usdhc0grp { |
| 170 | fsl,pins = < |
| 171 | MXRT1020_IOMUXC_GPIO_SD_B0_06_USDHC1_CD_B |
| 172 | 0x1B000 |
| 173 | MXRT1020_IOMUXC_GPIO_SD_B0_02_USDHC1_CMD |
| 174 | 0x17061 |
| 175 | MXRT1020_IOMUXC_GPIO_SD_B0_03_USDHC1_CLK |
| 176 | 0x17061 |
| 177 | MXRT1020_IOMUXC_GPIO_SD_B0_01_USDHC1_DATA3 |
| 178 | 0x17061 |
| 179 | MXRT1020_IOMUXC_GPIO_SD_B0_00_USDHC1_DATA2 |
| 180 | 0x17061 |
| 181 | MXRT1020_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA1 |
| 182 | 0x17061 |
| 183 | MXRT1020_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA0 |
| 184 | 0x17061 |
| 185 | >; |
| 186 | }; |
| 187 | }; |
| 188 | }; |
| 189 | |
Giulio Benetti | bc49440 | 2021-05-13 12:18:34 +0200 | [diff] [blame] | 190 | &gpt1 { |
| 191 | status = "okay"; |
| 192 | }; |
| 193 | |
Giulio Benetti | 931edc6 | 2020-02-18 20:02:55 +0100 | [diff] [blame] | 194 | &usdhc1 { |
| 195 | pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; |
| 196 | pinctrl-0 = <&pinctrl_usdhc0>; |
| 197 | pinctrl-1 = <&pinctrl_usdhc0>; |
| 198 | pinctrl-2 = <&pinctrl_usdhc0>; |
| 199 | pinctrl-3 = <&pinctrl_usdhc0>; |
| 200 | status = "okay"; |
| 201 | |
| 202 | cd-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; |
| 203 | }; |