include/configs/blanche.h

/*
 * include/configs/blanche.h
 *     This file is blanche board configuration.
 *
 * Copyright (C) 2016 Renesas Electronics Corporation
 *
 * SPDX-License-Identifier: GPL-2.0
 */

#ifndef __BLANCHE_H
#define __BLANCHE_H

#undef DEBUG
#define CONFIG_R8A7792
#define CONFIG_RMOBILE_BOARD_STRING "Blanche"

#include "rcar-gen2-common.h"

#define CONFIG_USE_ARCH_MEMSET
#define CONFIG_USE_ARCH_MEMCPY

/* STACK */
#define CONFIG_SYS_INIT_SP_ADDR		0xE817FFFC
#define STACK_AREA_SIZE			0xC000
#define LOW_LEVEL_MERAM_STACK	\
		(CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)

/* MEMORY */
#define RCAR_GEN2_SDRAM_BASE		0x40000000
#define RCAR_GEN2_SDRAM_SIZE		(1024u * 1024 * 1024)
#define RCAR_GEN2_UBOOT_SDRAM_SIZE	(512 * 1024 * 1024)

/* SCIF */
#define CONFIG_SCIF_CONSOLE
#define CONFIG_CONS_SCIF0

#define CONFIG_SYS_MEMTEST_START	(RCAR_GEN2_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 504 * 1024 * 1024)

#undef	CONFIG_SYS_ALT_MEMTEST
#undef	CONFIG_SYS_MEMTEST_SCRATCH
#undef	CONFIG_SYS_LOADS_BAUD_CHANGE

/* FLASH */
/* #define CONFIG_SYS_NO_FLASH */	/* uncomment if use QSPI-FLASH */
#if defined(CONFIG_SYS_NO_FLASH)
#define CONFIG_SYS_TEXT_BASE	0x40000000
#define CONFIG_SPI
#define CONFIG_SH_QSPI
#define CONFIG_SH_QSPI_BASE	0xE6B10000
#else
#define CONFIG_SYS_TEXT_BASE		0x00000000
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
#define CONFIG_FLASH_SHOW_PROGRESS	45
#define CONFIG_SYS_FLASH_BASE		0x00000000
#define CONFIG_SYS_FLASH_SIZE		0x04000000	/* 64 MB */
#define CONFIG_SYS_MAX_FLASH_SECT	1024
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_FLASH_BANKS_LIST	{ (CONFIG_SYS_FLASH_BASE) }
#define CONFIG_SYS_FLASH_BANKS_SIZES	{ (CONFIG_SYS_FLASH_SIZE) }

#define CONFIG_SYS_FLASH_ERASE_TOUT	3000
#define CONFIG_SYS_FLASH_WRITE_TOUT	3000
#define CONFIG_SYS_FLASH_LOCK_TOUT	3000
#define CONFIG_SYS_FLASH_UNLOCK_TOUT	3000
#undef  CONFIG_CMD_SF
#undef  CONFIG_CMD_SPI
#endif

/* BLANCHE on board LANC: SMC89218 (ExCS0) */
#define CONFIG_NET_MULTI
#define CONFIG_SMC911X                  1
#define CONFIG_SMC911X_16_BIT           1
#define CONFIG_SMC911X_BASE             0x18000000

/* Board Clock */
#define RMOBILE_XTAL_CLK	20000000u
#define CONFIG_SYS_CLK_FREQ	RMOBILE_XTAL_CLK
#define CONFIG_SH_TMU_CLK_FREQ	(CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
#define CONFIG_SYS_TMU_CLK_DIV	4

/* ENV setting */
#if defined(CONFIG_SYS_NO_FLASH)
#else
#undef  CONFIG_ENV_IS_IN_SPI_FLASH
#undef  CONFIG_ENV_ADDR
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE	(256 * 1024)
#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_OFFSET	(CONFIG_ENV_ADDR)
#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND	(CONFIG_SYS_MONITOR_LEN)
#endif

/* USB */
#undef CONFIG_CMD_USB

#define CONFIG_GENERIC_MMC

/* Module stop status bits */
/* INTC-RT */
#define CONFIG_SMSTP0_ENA	0x00400000
/* SDHI0 */
#define CONFIG_SMSTP3_ENA	0x00004000
/* INTC-SYS, IRQC */
#define CONFIG_SMSTP4_ENA	0x00000180
/* SCIF0 */
#define CONFIG_SMSTP7_ENA	0x00200000
/* QSPI */
#define CONFIG_SMSTP9_ENA	0x00020000
/* SYS-DMAC0 */
#define CONFIG_RMSTP2_ENA	0x00080000

/* SDHI */
#define CONFIG_SH_SDHI_FREQ	97500000
#define HAVE_BLOCK_DEVICE

#endif	/* __BLANCHE_H */