blob: fdca48186916097692406f8518e2af96765a5ce6 [file] [log] [blame]
Jean-Jacques Hiblotcb608cc2018-02-27 17:05:47 +01001// SPDX-License-Identifier: GPL-2.0
2// Copyright (c) 2018 Texas Instruments
3// MMC IOdelay values for TI's DRA76x and AM576x SoCs.
4// Author: Sekhar Nori <nsekhar@ti.com>
5
6/*
7 * Rules for modifying this file:
8 * a) Update of this file should typically correspond to a datamanual revision.
9 * Datamanual revision that was used should be updated in comment below.
10 * If there is no update to datamanual, do not update the values. If you
11 * need to use values different from that recommended by the datamanual
12 * for your design, then you should consider adding values to the device-
13 * -tree file for your board directly.
14 * b) We keep the mode names as close to the datamanual as possible. So
15 * if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
16 * we follow that in code too.
17 * c) If the values change between multiple revisions of silicon, we add
18 * a revision tag to both the new and old entry. Use 'rev11' for PG 1.1,
19 * 'rev20' for PG 2.0 and so on.
20 * d) The node name and node label should be the exact same string. This is
21 * to curb naming creativity and achieve consistency.
22 *
23 * Datamanual Revisions:
24 *
Faiz Abbas637fc2c2019-06-20 15:07:22 +053025 * DRA76x Silicon Revision 1.0: SPRS993E, Revised December 2018
Jean-Jacques Hiblotcb608cc2018-02-27 17:05:47 +010026 *
27 */
28
29&dra7_pmx_core {
30 mmc1_pins_default: mmc1_pins_default {
31 pinctrl-single,pins = <
32 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
33 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
34 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
35 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
36 DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
37 DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
38 >;
39 };
40
41 mmc1_pins_hs: mmc1_pins_hs {
42 pinctrl-single,pins = <
43 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
44 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
45 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
46 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
47 DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
48 DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
49 >;
50 };
51
52 mmc1_pins_sdr50: mmc1_pins_sdr50 {
53 pinctrl-single,pins = <
54 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_clk.clk */
55 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_cmd.cmd */
56 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat0.dat0 */
57 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat1.dat1 */
58 DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat2.dat2 */
59 DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0) /* mmc1_dat3.dat3 */
60 >;
61 };
62
63 mmc1_pins_ddr50: mmc1_pins_ddr50 {
64 pinctrl-single,pins = <
65 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_clk.clk */
66 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_cmd.cmd */
67 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat0.dat0 */
68 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat1.dat1 */
69 DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat2.dat2 */
70 DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0) /* mmc1_dat3.dat3 */
71 >;
72 };
73
74 mmc2_pins_default: mmc2_pins_default {
75 pinctrl-single,pins = <
76 DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
77 DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
78 DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
79 DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
80 DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
81 DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
82 DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
83 DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
84 DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
85 DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
86 >;
87 };
88
89 mmc2_pins_hs200: mmc2_pins_hs200 {
90 pinctrl-single,pins = <
91 DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
92 DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
93 DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
94 DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
95 DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
96 DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
97 DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
98 DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
99 DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
100 DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
101 >;
102 };
103
104 mmc3_pins_default: mmc3_pins_default {
105 pinctrl-single,pins = <
106 DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
107 DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
108 DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
109 DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
110 DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
111 DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
112 >;
113 };
114
115 mmc4_pins_hs: mmc4_pins_hs {
116 pinctrl-single,pins = <
117 DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
118 DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
119 DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
120 DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
121 DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
122 DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
123 >;
124 };
125};
126
127&dra7_iodelay_core {
128
129 /* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
130 mmc1_iodelay_ddr_conf: mmc1_iodelay_ddr_conf {
131 pinctrl-pin-array = <
132 0x618 A_DELAY_PS(489) G_DELAY_PS(0) /* CFG_MMC1_CLK_IN */
133 0x624 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_IN */
134 0x630 A_DELAY_PS(374) G_DELAY_PS(0) /* CFG_MMC1_DAT0_IN */
135 0x63c A_DELAY_PS(31) G_DELAY_PS(0) /* CFG_MMC1_DAT1_IN */
136 0x648 A_DELAY_PS(56) G_DELAY_PS(0) /* CFG_MMC1_DAT2_IN */
137 0x654 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_IN */
138 0x620 A_DELAY_PS(1355) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
139 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
140 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
141 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
142 0x638 A_DELAY_PS(0) G_DELAY_PS(4) /* CFG_MMC1_DAT0_OUT */
143 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
144 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
145 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
146 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
147 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
148 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
149 >;
150 };
151
152 /* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
153 mmc1_iodelay_sdr104_conf: mmc1_iodelay_sdr104_conf {
154 pinctrl-pin-array = <
155 0x620 A_DELAY_PS(892) G_DELAY_PS(0) /* CFG_MMC1_CLK_OUT */
156 0x628 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OEN */
157 0x62c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_CMD_OUT */
158 0x634 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OEN */
159 0x638 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT0_OUT */
160 0x640 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OEN */
161 0x644 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT1_OUT */
162 0x64c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OEN */
163 0x650 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT2_OUT */
164 0x658 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OEN */
165 0x65c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC1_DAT3_OUT */
166 >;
167 };
168
169 /* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
170 mmc2_iodelay_hs200_conf: mmc2_iodelay_hs200_conf {
171 pinctrl-pin-array = <
Faiz Abbas637fc2c2019-06-20 15:07:22 +0530172 0x190 A_DELAY_PS(384) G_DELAY_PS(0) /* CFG_GPMC_A19_OEN */
173 0x194 A_DELAY_PS(350) G_DELAY_PS(174) /* CFG_GPMC_A19_OUT */
174 0x1a8 A_DELAY_PS(410) G_DELAY_PS(0) /* CFG_GPMC_A20_OEN */
175 0x1ac A_DELAY_PS(335) G_DELAY_PS(0) /* CFG_GPMC_A20_OUT */
176 0x1b4 A_DELAY_PS(468) G_DELAY_PS(0) /* CFG_GPMC_A21_OEN */
177 0x1b8 A_DELAY_PS(339) G_DELAY_PS(0) /* CFG_GPMC_A21_OUT */
178 0x1c0 A_DELAY_PS(676) G_DELAY_PS(0) /* CFG_GPMC_A22_OEN */
179 0x1c4 A_DELAY_PS(219) G_DELAY_PS(0) /* CFG_GPMC_A22_OUT */
180 0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154) /* CFG_GPMC_A23_OUT */
181 0x1d8 A_DELAY_PS(640) G_DELAY_PS(0) /* CFG_GPMC_A24_OEN */
182 0x1dc A_DELAY_PS(150) G_DELAY_PS(0) /* CFG_GPMC_A24_OUT */
183 0x1e4 A_DELAY_PS(356) G_DELAY_PS(0) /* CFG_GPMC_A25_OEN */
184 0x1e8 A_DELAY_PS(150) G_DELAY_PS(0) /* CFG_GPMC_A25_OUT */
185 0x1f0 A_DELAY_PS(579) G_DELAY_PS(0) /* CFG_GPMC_A26_OEN */
186 0x1f4 A_DELAY_PS(200) G_DELAY_PS(0) /* CFG_GPMC_A26_OUT */
187 0x1fc A_DELAY_PS(435) G_DELAY_PS(0) /* CFG_GPMC_A27_OEN */
188 0x200 A_DELAY_PS(236) G_DELAY_PS(0) /* CFG_GPMC_A27_OUT */
189 0x364 A_DELAY_PS(759) G_DELAY_PS(0) /* CFG_GPMC_CS1_OEN */
190 0x368 A_DELAY_PS(372) G_DELAY_PS(0) /* CFG_GPMC_CS1_OUT */
Jean-Jacques Hiblotcb608cc2018-02-27 17:05:47 +0100191 >;
192 };
193
194 /* Corresponds to MMC3_MANUAL1 in datamanual */
195 mmc3_iodelay_manual1_conf: mmc3_iodelay_manual1_conf {
196 pinctrl-pin-array = <
197 0x678 A_DELAY_PS(0) G_DELAY_PS(386) /* CFG_MMC3_CLK_IN */
198 0x680 A_DELAY_PS(605) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */
199 0x684 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */
200 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */
201 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */
202 0x690 A_DELAY_PS(171) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */
203 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */
204 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */
205 0x69c A_DELAY_PS(221) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */
206 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */
207 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */
208 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */
209 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */
210 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */
211 0x6b4 A_DELAY_PS(474) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */
212 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */
213 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */
214 >;
215 };
216
217 /* Corresponds to MMC3_MANUAL2 in datamanual */
218 mmc3_iodelay_sdr50_conf: mmc3_iodelay_sdr50_conf {
219 pinctrl-pin-array = <
220 0x678 A_DELAY_PS(852) G_DELAY_PS(0) /* CFG_MMC3_CLK_IN */
221 0x680 A_DELAY_PS(94) G_DELAY_PS(0) /* CFG_MMC3_CLK_OUT */
222 0x684 A_DELAY_PS(122) G_DELAY_PS(0) /* CFG_MMC3_CMD_IN */
223 0x688 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OEN */
224 0x68c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_CMD_OUT */
225 0x690 A_DELAY_PS(91) G_DELAY_PS(0) /* CFG_MMC3_DAT0_IN */
226 0x694 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OEN */
227 0x698 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT0_OUT */
228 0x69c A_DELAY_PS(57) G_DELAY_PS(0) /* CFG_MMC3_DAT1_IN */
229 0x6a0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OEN */
230 0x6a4 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT1_OUT */
231 0x6a8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_IN */
232 0x6ac A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OEN */
233 0x6b0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT2_OUT */
234 0x6b4 A_DELAY_PS(375) G_DELAY_PS(0) /* CFG_MMC3_DAT3_IN */
235 0x6b8 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OEN */
236 0x6bc A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_MMC3_DAT3_OUT */
237 >;
238 };
239
240 /* Corresponds to MMC4_MANUAL1 in datamanual */
241 mmc4_iodelay_manual1_conf: mmc4_iodelay_manual1_conf {
242 pinctrl-pin-array = <
243 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
244 0x848 A_DELAY_PS(1147) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
245 0x84c A_DELAY_PS(1834) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
246 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
247 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
248 0x870 A_DELAY_PS(2165) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
249 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
250 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
251 0x87c A_DELAY_PS(1929) G_DELAY_PS(64) /* CFG_UART2_RTSN_IN */
252 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
253 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
254 0x888 A_DELAY_PS(1935) G_DELAY_PS(128) /* CFG_UART2_RXD_IN */
255 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
256 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
257 0x894 A_DELAY_PS(2172) G_DELAY_PS(44) /* CFG_UART2_TXD_IN */
258 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
259 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
260 >;
261 };
262
263 /* Corresponds to MMC4_DS_MANUAL1 in datamanual */
264 mmc4_iodelay_default_conf: mmc4_iodelay_default_conf {
265 pinctrl-pin-array = <
266 0x840 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_IN */
267 0x848 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_CTSN_OUT */
268 0x84c A_DELAY_PS(307) G_DELAY_PS(0) /* CFG_UART1_RTSN_IN */
269 0x850 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OEN */
270 0x854 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART1_RTSN_OUT */
271 0x870 A_DELAY_PS(785) G_DELAY_PS(0) /* CFG_UART2_CTSN_IN */
272 0x874 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OEN */
273 0x878 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_CTSN_OUT */
274 0x87c A_DELAY_PS(613) G_DELAY_PS(0) /* CFG_UART2_RTSN_IN */
275 0x880 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OEN */
276 0x884 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RTSN_OUT */
277 0x888 A_DELAY_PS(683) G_DELAY_PS(0) /* CFG_UART2_RXD_IN */
278 0x88c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OEN */
279 0x890 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_RXD_OUT */
280 0x894 A_DELAY_PS(835) G_DELAY_PS(0) /* CFG_UART2_TXD_IN */
281 0x898 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OEN */
282 0x89c A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_UART2_TXD_OUT */
283 >;
284 };
285};