blob: 687707627e5d781c88a92acfda0d3c2e06b48ce9 [file] [log] [blame]
wdenk281e00a2004-08-01 22:48:16 +00001/*
2 dm9000.c: Version 1.2 12/15/2003
3
4 A Davicom DM9000 ISA NIC fast Ethernet driver for Linux.
5 Copyright (C) 1997 Sten Wang
6
7 This program is free software; you can redistribute it and/or
8 modify it under the terms of the GNU General Public License
9 as published by the Free Software Foundation; either version 2
10 of the License, or (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved.
18
19V0.11 06/20/2001 REG_0A bit3=1, default enable BP with DA match
20 06/22/2001 Support DM9801 progrmming
21 E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000
22 E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200
23 R17 = (R17 & 0xfff0) | NF + 3
24 E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200
25 R17 = (R17 & 0xfff0) | NF
26
27v1.00 modify by simon 2001.9.5
28 change for kernel 2.4.x
29
30v1.1 11/09/2001 fix force mode bug
31
32v1.2 03/18/2003 Weilun Huang <weilun_huang@davicom.com.tw>:
33 Fixed phy reset.
34 Added tx/rx 32 bit mode.
35 Cleaned up for kernel merge.
36
37--------------------------------------
38
39 12/15/2003 Initial port to u-boot by Sascha Hauer <saschahauer@web.de>
40
41TODO: Homerun NIC and longrun NIC are not functional, only internal at the
42 moment.
43*/
44
45#include <common.h>
46#include <command.h>
47#include <net.h>
48#include <asm/io.h>
49
50#ifdef CONFIG_DRIVER_DM9000
51
52#include "dm9000x.h"
53
54/* Board/System/Debug information/definition ---------------- */
55
56#define DM9801_NOISE_FLOOR 0x08
57#define DM9802_NOISE_FLOOR 0x05
58
59/* #define CONFIG_DM9000_DEBUG */
60
61#ifdef CONFIG_DM9000_DEBUG
62#define DM9000_DBG(fmt,args...) printf(fmt ,##args)
63#else /* */
64#define DM9000_DBG(fmt,args...)
65#endif /* */
66enum DM9000_PHY_mode { DM9000_10MHD = 0, DM9000_100MHD =
67 1, DM9000_10MFD = 4, DM9000_100MFD = 5, DM9000_AUTO =
68 8, DM9000_1M_HPNA = 0x10
69};
70enum DM9000_NIC_TYPE { FASTETHER_NIC = 0, HOMERUN_NIC = 1, LONGRUN_NIC = 2
71};
72
73/* Structure/enum declaration ------------------------------- */
74typedef struct board_info {
75 u32 runt_length_counter; /* counter: RX length < 64byte */
76 u32 long_length_counter; /* counter: RX length > 1514byte */
77 u32 reset_counter; /* counter: RESET */
78 u32 reset_tx_timeout; /* RESET caused by TX Timeout */
79 u32 reset_rx_status; /* RESET caused by RX Statsus wrong */
80 u16 tx_pkt_cnt;
81 u16 queue_start_addr;
82 u16 dbug_cnt;
83 u8 phy_addr;
84 u8 device_wait_reset; /* device state */
85 u8 nic_type; /* NIC type */
86 unsigned char srom[128];
87} board_info_t;
88board_info_t dmfe_info;
89
90/* For module input parameter */
91static int media_mode = DM9000_AUTO;
92static u8 nfloor = 0;
93
94/* function declaration ------------------------------------- */
95int eth_init(bd_t * bd);
96int eth_send(volatile void *, int);
97int eth_rx(void);
98void eth_halt(void);
99static int dm9000_probe(void);
100static u16 phy_read(int);
101static void phy_write(int, u16);
102static u16 read_srom_word(int);
103static u8 DM9000_ior(int);
104static void DM9000_iow(int reg, u8 value);
105
106/* DM9000 network board routine ---------------------------- */
107
108#define DM9000_outb(d,r) ( *(volatile u8 *)r = d )
109#define DM9000_outw(d,r) ( *(volatile u16 *)r = d )
110#define DM9000_outl(d,r) ( *(volatile u32 *)r = d )
111#define DM9000_inb(r) (*(volatile u8 *)r)
112#define DM9000_inw(r) (*(volatile u16 *)r)
113#define DM9000_inl(r) (*(volatile u32 *)r)
114
115#ifdef CONFIG_DM9000_DEBUG
116static void
117dump_regs(void)
118{
119 DM9000_DBG("\n");
120 DM9000_DBG("NCR (0x00): %02x\n", DM9000_ior(0));
121 DM9000_DBG("NSR (0x01): %02x\n", DM9000_ior(1));
122 DM9000_DBG("TCR (0x02): %02x\n", DM9000_ior(2));
123 DM9000_DBG("TSRI (0x03): %02x\n", DM9000_ior(3));
124 DM9000_DBG("TSRII (0x04): %02x\n", DM9000_ior(4));
125 DM9000_DBG("RCR (0x05): %02x\n", DM9000_ior(5));
126 DM9000_DBG("RSR (0x06): %02x\n", DM9000_ior(6));
127 DM9000_DBG("ISR (0xFE): %02x\n", DM9000_ior(ISR));
128 DM9000_DBG("\n");
129}
130#endif /* */
131
132/*
133 Search DM9000 board, allocate space and register it
134*/
135int
136dm9000_probe(void)
137{
138 u32 id_val;
139 id_val = DM9000_ior(DM9000_VIDL);
140 id_val |= DM9000_ior(DM9000_VIDH) << 8;
141 id_val |= DM9000_ior(DM9000_PIDL) << 16;
142 id_val |= DM9000_ior(DM9000_PIDH) << 24;
143 if (id_val == DM9000_ID) {
144 printf("dm9000 i/o: 0x%x, id: 0x%x \n", CONFIG_DM9000_BASE,
145 id_val);
146 return 0;
147 } else {
148 printf("dm9000 not found at 0x%08x id: 0x%08x\n",
149 CONFIG_DM9000_BASE, id_val);
150 return -1;
151 }
152}
153
154/* Set PHY operationg mode
155*/
156static void
157set_PHY_mode(void)
158{
159 u16 phy_reg4 = 0x01e1, phy_reg0 = 0x1000;
160 if (!(media_mode & DM9000_AUTO)) {
161 switch (media_mode) {
162 case DM9000_10MHD:
163 phy_reg4 = 0x21;
164 phy_reg0 = 0x0000;
165 break;
166 case DM9000_10MFD:
167 phy_reg4 = 0x41;
168 phy_reg0 = 0x1100;
169 break;
170 case DM9000_100MHD:
171 phy_reg4 = 0x81;
172 phy_reg0 = 0x2000;
173 break;
174 case DM9000_100MFD:
175 phy_reg4 = 0x101;
176 phy_reg0 = 0x3100;
177 break;
178 }
179 phy_write(4, phy_reg4); /* Set PHY media mode */
180 phy_write(0, phy_reg0); /* Tmp */
181 }
182 DM9000_iow(DM9000_GPCR, 0x01); /* Let GPIO0 output */
183 DM9000_iow(DM9000_GPR, 0x00); /* Enable PHY */
184}
185
186/*
187 Init HomeRun DM9801
188*/
189static void
190program_dm9801(u16 HPNA_rev)
191{
192 __u16 reg16, reg17, reg24, reg25;
193 if (!nfloor)
194 nfloor = DM9801_NOISE_FLOOR;
195 reg16 = phy_read(16);
196 reg17 = phy_read(17);
197 reg24 = phy_read(24);
198 reg25 = phy_read(25);
199 switch (HPNA_rev) {
200 case 0xb900: /* DM9801 E3 */
201 reg16 |= 0x1000;
202 reg25 = ((reg24 + nfloor) & 0x00ff) | 0xf000;
203 break;
204 case 0xb901: /* DM9801 E4 */
205 reg25 = ((reg24 + nfloor) & 0x00ff) | 0xc200;
206 reg17 = (reg17 & 0xfff0) + nfloor + 3;
207 break;
208 case 0xb902: /* DM9801 E5 */
209 case 0xb903: /* DM9801 E6 */
210 default:
211 reg16 |= 0x1000;
212 reg25 = ((reg24 + nfloor - 3) & 0x00ff) | 0xc200;
213 reg17 = (reg17 & 0xfff0) + nfloor;
214 }
215 phy_write(16, reg16);
216 phy_write(17, reg17);
217 phy_write(25, reg25);
218}
219
220/*
221 Init LongRun DM9802
222*/
223static void
224program_dm9802(void)
225{
226 __u16 reg25;
227 if (!nfloor)
228 nfloor = DM9802_NOISE_FLOOR;
229 reg25 = phy_read(25);
230 reg25 = (reg25 & 0xff00) + nfloor;
231 phy_write(25, reg25);
232}
233
234/* Identify NIC type
235*/
236static void
237identify_nic(void)
238{
239 struct board_info *db = &dmfe_info; /* Point a board information structure */
240 u16 phy_reg3;
241 DM9000_iow(DM9000_NCR, NCR_EXT_PHY);
242 phy_reg3 = phy_read(3);
243 switch (phy_reg3 & 0xfff0) {
244 case 0xb900:
245 if (phy_read(31) == 0x4404) {
246 db->nic_type = HOMERUN_NIC;
247 program_dm9801(phy_reg3);
248 DM9000_DBG("found homerun NIC\n");
249 } else {
250 db->nic_type = LONGRUN_NIC;
251 DM9000_DBG("found longrun NIC\n");
252 program_dm9802();
253 }
254 break;
255 default:
256 db->nic_type = FASTETHER_NIC;
257 break;
258 }
259 DM9000_iow(DM9000_NCR, 0);
260}
261
262/* General Purpose dm9000 reset routine */
263static void
264dm9000_reset(void)
265{
266 DM9000_DBG("resetting\n");
267 DM9000_iow(DM9000_NCR, NCR_RST);
268 udelay(1000); /* delay 1ms */
269}
270
271/* Initilize dm9000 board
272*/
273int
274eth_init(bd_t * bd)
275{
276 int i, oft, lnk;
277 DM9000_DBG("eth_init()\n");
278
279 /* RESET device */
280 dm9000_reset();
281 dm9000_probe();
282
283 /* NIC Type: FASTETHER, HOMERUN, LONGRUN */
284 identify_nic();
285
286 /* GPIO0 on pre-activate PHY */
287 DM9000_iow(DM9000_GPR, 0x00); /*REG_1F bit0 activate phyxcer */
288
289 /* Set PHY */
290 set_PHY_mode();
291
292 /* Program operating register */
293 DM9000_iow(DM9000_NCR, 0x0); /* only intern phy supported by now */
294 DM9000_iow(DM9000_TCR, 0); /* TX Polling clear */
295 DM9000_iow(DM9000_BPTR, 0x3f); /* Less 3Kb, 200us */
296 DM9000_iow(DM9000_FCTR, FCTR_HWOT(3) | FCTR_LWOT(8)); /* Flow Control : High/Low Water */
297 DM9000_iow(DM9000_FCR, 0x0); /* SH FIXME: This looks strange! Flow Control */
298 DM9000_iow(DM9000_SMCR, 0); /* Special Mode */
299 DM9000_iow(DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END); /* clear TX status */
300 DM9000_iow(DM9000_ISR, 0x0f); /* Clear interrupt status */
301
302 /* Set Node address */
303 for (i = 0; i < 6; i++)
304 ((u16 *) bd->bi_enetaddr)[i] = read_srom_word(i);
305 printf("MAC: %02x:%02x:%02x:%02x:%02x:%02x\n", bd->bi_enetaddr[0],
306 bd->bi_enetaddr[1], bd->bi_enetaddr[2], bd->bi_enetaddr[3],
307 bd->bi_enetaddr[4], bd->bi_enetaddr[5]);
308 for (i = 0, oft = 0x10; i < 6; i++, oft++)
309 DM9000_iow(oft, bd->bi_enetaddr[i]);
310 for (i = 0, oft = 0x16; i < 8; i++, oft++)
311 DM9000_iow(oft, 0xff);
312
313 /* read back mac, just to be sure */
314 for (i = 0, oft = 0x10; i < 6; i++, oft++)
315 DM9000_DBG("%02x:", DM9000_ior(oft));
316 DM9000_DBG("\n");
317
318 /* Activate DM9000 */
319 DM9000_iow(DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN); /* RX enable */
320 DM9000_iow(DM9000_IMR, IMR_PAR); /* Enable TX/RX interrupt mask */
321 i = 0;
322 while (!(phy_read(1) & 0x20)) { /* autonegation complete bit */
323 udelay(1000);
324 i++;
325 if (i == 10000) {
326 printf("could not establish link\n");
327 return 0;
328 }
329 }
330
331 /* see what we've got */
332 lnk = phy_read(17) >> 12;
333 printf("operating at ");
334 switch (lnk) {
335 case 1:
336 printf("10M half duplex ");
337 break;
338 case 2:
339 printf("10M full duplex ");
340 break;
341 case 4:
342 printf("100M half duplex ");
343 break;
344 case 8:
345 printf("100M full duplex ");
346 break;
347 default:
348 printf("unknown: %d ", lnk);
349 break;
350 }
351 printf("mode\n");
352 return 0;
353}
354
355/*
356 Hardware start transmission.
357 Send a packet to media from the upper layer.
358*/
359int
360eth_send(volatile void *packet, int length)
361{
362 char *data_ptr;
363 u32 tmplen, i;
364 int tmo;
365 DM9000_DBG("eth_send: length: %d\n", length);
366 for (i = 0; i < length; i++) {
367 if (i % 8 == 0)
368 DM9000_DBG("\nSend: 02x: ", i);
369 DM9000_DBG("%02x ", ((unsigned char *) packet)[i]);
370 } DM9000_DBG("\n");
371
372 /* Move data to DM9000 TX RAM */
373 data_ptr = (char *) packet;
374 DM9000_outb(DM9000_MWCMD, DM9000_IO);
375
376#ifdef CONFIG_DM9000_USE_8BIT
377 /* Byte mode */
378 for (i = 0; i < length; i++)
379 DM9000_outb((data_ptr[i] & 0xff), DM9000_DATA);
380
381#endif /* */
382#ifdef CONFIG_DM9000_USE_16BIT
383 tmplen = (length + 1) / 2;
384 for (i = 0; i < tmplen; i++)
385 DM9000_outw(((u16 *) data_ptr)[i], DM9000_DATA);
386
387#endif /* */
388#ifdef CONFIG_DM9000_USE_32BIT
389 tmplen = (length + 3) / 4;
390 for (i = 0; i < tmplen; i++)
391 DM9000_outl(((u32 *) data_ptr)[i], DM9000_DATA);
392
393#endif /* */
394
395 /* Set TX length to DM9000 */
396 DM9000_iow(DM9000_TXPLL, length & 0xff);
397 DM9000_iow(DM9000_TXPLH, (length >> 8) & 0xff);
398
399 /* Issue TX polling command */
400 DM9000_iow(DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */
401
402 /* wait for end of transmission */
403 tmo = get_timer(0) + 5 * CFG_HZ;
404 while (DM9000_ior(DM9000_TCR) & TCR_TXREQ) {
405 if (get_timer(0) >= tmo) {
406 printf("transmission timeout\n");
407 break;
408 }
409 }
410 DM9000_DBG("transmit done\n\n");
411 return 0;
412}
413
414/*
415 Stop the interface.
416 The interface is stopped when it is brought.
417*/
418void
419eth_halt(void)
420{
421 DM9000_DBG("eth_halt\n");
422
423 /* RESET devie */
424 phy_write(0, 0x8000); /* PHY RESET */
425 DM9000_iow(DM9000_GPR, 0x01); /* Power-Down PHY */
426 DM9000_iow(DM9000_IMR, 0x80); /* Disable all interrupt */
427 DM9000_iow(DM9000_RCR, 0x00); /* Disable RX */
428}
429
430/*
431 Received a packet and pass to upper layer
432*/
433int
434eth_rx(void)
435{
436 u8 rxbyte, *rdptr = (u8 *) NetRxPackets[0];
437 u16 RxStatus, RxLen = 0;
438 u32 tmplen, i;
Wolfgang Denkd689e342006-08-14 21:18:21 +0200439#ifdef CONFIG_DM9000_USE_32BIT
440 u32 tmpdata;
441#endif
wdenk281e00a2004-08-01 22:48:16 +0000442
443 /* Check packet ready or not */
444 DM9000_ior(DM9000_MRCMDX); /* Dummy read */
445 rxbyte = DM9000_inb(DM9000_DATA); /* Got most updated data */
446 if (rxbyte == 0)
447 return 0;
448
449 /* Status check: this byte must be 0 or 1 */
450 if (rxbyte > 1) {
451 DM9000_iow(DM9000_RCR, 0x00); /* Stop Device */
452 DM9000_iow(DM9000_ISR, 0x80); /* Stop INT request */
453 DM9000_DBG("rx status check: %d\n", rxbyte);
454 }
455 DM9000_DBG("receiving packet\n");
456
457 /* A packet ready now & Get status/length */
458 DM9000_outb(DM9000_MRCMD, DM9000_IO);
459
460#ifdef CONFIG_DM9000_USE_8BIT
461 RxStatus = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
462 RxLen = DM9000_inb(DM9000_DATA) + (DM9000_inb(DM9000_DATA) << 8);
463
464#endif /* */
465#ifdef CONFIG_DM9000_USE_16BIT
466 RxStatus = DM9000_inw(DM9000_DATA);
467 RxLen = DM9000_inw(DM9000_DATA);
468
469#endif /* */
470#ifdef CONFIG_DM9000_USE_32BIT
471 tmpdata = DM9000_inl(DM9000_DATA);
472 RxStatus = tmpdata;
473 RxLen = tmpdata >> 16;
474
475#endif /* */
476 DM9000_DBG("rx status: 0x%04x rx len: %d\n", RxStatus, RxLen);
477
478 /* Move data from DM9000 */
479 /* Read received packet from RX SRAM */
480#ifdef CONFIG_DM9000_USE_8BIT
481 for (i = 0; i < RxLen; i++)
482 rdptr[i] = DM9000_inb(DM9000_DATA);
483
484#endif /* */
485#ifdef CONFIG_DM9000_USE_16BIT
486 tmplen = (RxLen + 1) / 2;
487 for (i = 0; i < tmplen; i++)
488 ((u16 *) rdptr)[i] = DM9000_inw(DM9000_DATA);
489
490#endif /* */
491#ifdef CONFIG_DM9000_USE_32BIT
492 tmplen = (RxLen + 3) / 4;
493 for (i = 0; i < tmplen; i++)
494 ((u32 *) rdptr)[i] = DM9000_inl(DM9000_DATA);
495
496#endif /* */
497 if ((RxStatus & 0xbf00) || (RxLen < 0x40)
498 || (RxLen > DM9000_PKT_MAX)) {
499 if (RxStatus & 0x100) {
500 printf("rx fifo error\n");
501 }
502 if (RxStatus & 0x200) {
503 printf("rx crc error\n");
504 }
505 if (RxStatus & 0x8000) {
506 printf("rx length error\n");
507 }
508 if (RxLen > DM9000_PKT_MAX) {
509 printf("rx length too big\n");
510 dm9000_reset();
511 }
512 } else {
513
514 /* Pass to upper layer */
515 DM9000_DBG("passing packet to upper layer\n");
516 NetReceive(NetRxPackets[0], RxLen);
517 return RxLen;
518 }
519 return 0;
520}
521
522/*
523 Read a word data from SROM
524*/
525static u16
526read_srom_word(int offset)
527{
528 DM9000_iow(DM9000_EPAR, offset);
529 DM9000_iow(DM9000_EPCR, 0x4);
530 udelay(200);
531 DM9000_iow(DM9000_EPCR, 0x0);
532 return (DM9000_ior(DM9000_EPDRL) + (DM9000_ior(DM9000_EPDRH) << 8));
533}
534
535/*
536 Read a byte from I/O port
537*/
538static u8
539DM9000_ior(int reg)
540{
541 DM9000_outb(reg, DM9000_IO);
542 return DM9000_inb(DM9000_DATA);
543}
544
545/*
546 Write a byte to I/O port
547*/
548static void
549DM9000_iow(int reg, u8 value)
550{
551 DM9000_outb(reg, DM9000_IO);
552 DM9000_outb(value, DM9000_DATA);
553}
554
555/*
556 Read a word from phyxcer
557*/
558static u16
559phy_read(int reg)
560{
561 u16 val;
562
563 /* Fill the phyxcer register into REG_0C */
564 DM9000_iow(DM9000_EPAR, DM9000_PHY | reg);
565 DM9000_iow(DM9000_EPCR, 0xc); /* Issue phyxcer read command */
566 udelay(100); /* Wait read complete */
567 DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer read command */
568 val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL);
569
570 /* The read data keeps on REG_0D & REG_0E */
571 DM9000_DBG("phy_read(%d): %d\n", reg, val);
572 return val;
573}
574
575/*
576 Write a word to phyxcer
577*/
578static void
579phy_write(int reg, u16 value)
580{
581
582 /* Fill the phyxcer register into REG_0C */
583 DM9000_iow(DM9000_EPAR, DM9000_PHY | reg);
584
585 /* Fill the written data into REG_0D & REG_0E */
586 DM9000_iow(DM9000_EPDRL, (value & 0xff));
587 DM9000_iow(DM9000_EPDRH, ((value >> 8) & 0xff));
588 DM9000_iow(DM9000_EPCR, 0xa); /* Issue phyxcer write command */
589 udelay(500); /* Wait write complete */
590 DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer write command */
591 DM9000_DBG("phy_write(reg:%d, value:%d)\n", reg, value);
592}
593#endif /* CONFIG_DRIVER_DM9000 */