| Fabio Estevam | 6b573ed | 2019-06-12 12:34:38 -0300 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | // |
| 3 | // Copyright 2013 Freescale Semiconductor, Inc. |
| 4 | // |
| 5 | // Author: Fabio Estevam <fabio.estevam@freescale.com> |
| 6 | |
| 7 | #include "imx6qdl-wandboard.dtsi" |
| 8 | |
| 9 | / { |
| 10 | reg_eth_phy: regulator-eth-phy { |
| 11 | compatible = "regulator-fixed"; |
| 12 | regulator-name = "ETH_PHY"; |
| 13 | regulator-min-microvolt = <3300000>; |
| 14 | regulator-max-microvolt = <3300000>; |
| 15 | gpio = <&gpio7 13 GPIO_ACTIVE_LOW>; |
| 16 | }; |
| 17 | }; |
| 18 | |
| 19 | &hdmi { |
| 20 | ddc-i2c-bus = <&i2c2>; |
| 21 | status = "okay"; |
| 22 | }; |
| 23 | |
| 24 | &i2c3 { |
| 25 | clock-frequency = <100000>; |
| 26 | pinctrl-names = "default"; |
| 27 | pinctrl-0 = <&pinctrl_i2c3>; |
| 28 | status = "okay"; |
| 29 | |
| 30 | pmic: pfuze100@8 { |
| 31 | compatible = "fsl,pfuze100"; |
| 32 | reg = <0x08>; |
| 33 | |
| 34 | regulators { |
| 35 | sw1a_reg: sw1ab { |
| 36 | regulator-min-microvolt = <300000>; |
| 37 | regulator-max-microvolt = <1875000>; |
| 38 | regulator-boot-on; |
| 39 | regulator-always-on; |
| 40 | regulator-ramp-delay = <6250>; |
| 41 | }; |
| 42 | |
| 43 | sw1c_reg: sw1c { |
| 44 | regulator-min-microvolt = <300000>; |
| 45 | regulator-max-microvolt = <1875000>; |
| 46 | regulator-boot-on; |
| 47 | regulator-always-on; |
| 48 | regulator-ramp-delay = <6250>; |
| 49 | }; |
| 50 | |
| 51 | sw2_reg: sw2 { |
| 52 | regulator-min-microvolt = <800000>; |
| 53 | regulator-max-microvolt = <3300000>; |
| 54 | regulator-boot-on; |
| 55 | regulator-always-on; |
| 56 | regulator-ramp-delay = <6250>; |
| 57 | }; |
| 58 | |
| 59 | sw3a_reg: sw3a { |
| 60 | regulator-min-microvolt = <400000>; |
| 61 | regulator-max-microvolt = <1975000>; |
| 62 | regulator-boot-on; |
| 63 | regulator-always-on; |
| 64 | }; |
| 65 | |
| 66 | sw3b_reg: sw3b { |
| 67 | regulator-min-microvolt = <400000>; |
| 68 | regulator-max-microvolt = <1975000>; |
| 69 | regulator-boot-on; |
| 70 | regulator-always-on; |
| 71 | }; |
| 72 | |
| 73 | sw4_reg: sw4 { |
| 74 | regulator-min-microvolt = <800000>; |
| 75 | regulator-max-microvolt = <3300000>; |
| 76 | }; |
| 77 | |
| 78 | swbst_reg: swbst { |
| 79 | regulator-min-microvolt = <5000000>; |
| 80 | regulator-max-microvolt = <5150000>; |
| 81 | }; |
| 82 | |
| 83 | snvs_reg: vsnvs { |
| 84 | regulator-min-microvolt = <1000000>; |
| 85 | regulator-max-microvolt = <3000000>; |
| 86 | regulator-boot-on; |
| 87 | regulator-always-on; |
| 88 | }; |
| 89 | |
| 90 | vref_reg: vrefddr { |
| 91 | regulator-boot-on; |
| 92 | regulator-always-on; |
| 93 | }; |
| 94 | |
| 95 | vgen1_reg: vgen1 { |
| 96 | regulator-min-microvolt = <800000>; |
| 97 | regulator-max-microvolt = <1550000>; |
| 98 | }; |
| 99 | |
| 100 | vgen2_reg: vgen2 { |
| 101 | regulator-min-microvolt = <1500000>; |
| 102 | regulator-max-microvolt = <1500000>; |
| 103 | regulator-boot-on; |
| 104 | regulator-always-on; |
| 105 | }; |
| 106 | |
| 107 | vgen3_reg: vgen3 { |
| 108 | regulator-min-microvolt = <1800000>; |
| 109 | regulator-max-microvolt = <3300000>; |
| 110 | regulator-always-on; |
| 111 | }; |
| 112 | |
| 113 | vgen4_reg: vgen4 { |
| 114 | regulator-min-microvolt = <1800000>; |
| 115 | regulator-max-microvolt = <3300000>; |
| 116 | regulator-always-on; |
| 117 | }; |
| 118 | |
| 119 | vgen5_reg: vgen5 { |
| 120 | regulator-min-microvolt = <1800000>; |
| 121 | regulator-max-microvolt = <3300000>; |
| 122 | regulator-always-on; |
| 123 | }; |
| 124 | |
| 125 | vgen6_reg: vgen6 { |
| 126 | regulator-min-microvolt = <1800000>; |
| 127 | regulator-max-microvolt = <3300000>; |
| 128 | regulator-always-on; |
| 129 | }; |
| 130 | }; |
| 131 | }; |
| 132 | }; |
| 133 | |
| 134 | &fec { |
| 135 | phy-supply = <®_eth_phy>; |
| 136 | status = "okay"; |
| 137 | }; |
| 138 | |
| 139 | &iomuxc { |
| 140 | pinctrl-0 = <&pinctrl_hog>; |
| 141 | |
| 142 | imx6qdl-wandboard { |
| 143 | pinctrl_hog: hoggrp { |
| 144 | fsl,pins = < |
| Fabio Estevam | 6b573ed | 2019-06-12 12:34:38 -0300 | [diff] [blame] | 145 | MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USDHC1 CD */ |
| 146 | MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ |
| 147 | MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f0b1 /* RGMII PHY reset */ |
| 148 | >; |
| 149 | }; |
| 150 | |
| 151 | pinctrl_enet: enetgrp { |
| 152 | fsl,pins = < |
| 153 | MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 |
| 154 | MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 |
| 155 | MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 |
| 156 | MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 |
| 157 | MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 |
| 158 | MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 |
| 159 | MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 |
| 160 | MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 |
| 161 | MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 |
| 162 | MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 |
| 163 | MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 |
| 164 | MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 |
| 165 | MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 |
| 166 | MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 |
| 167 | MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 |
| Fabio Estevam | 6b573ed | 2019-06-12 12:34:38 -0300 | [diff] [blame] | 168 | >; |
| 169 | }; |
| 170 | |
| 171 | pinctrl_i2c3: i2c3grp { |
| 172 | fsl,pins = < |
| 173 | MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 |
| 174 | MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 |
| 175 | >; |
| 176 | }; |
| 177 | |
| 178 | pinctrl_spdif: spdifgrp { |
| 179 | fsl,pins = < |
| 180 | MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 |
| 181 | >; |
| 182 | }; |
| 183 | }; |
| 184 | }; |
| 185 | |
| 186 | &usdhc2 { |
| 187 | pinctrl-names = "default"; |
| 188 | pinctrl-0 = <&pinctrl_usdhc2>; |
| 189 | bus-width = <4>; |
| 190 | no-1-8-v; |
| 191 | non-removable; |
| 192 | status = "okay"; |
| 193 | }; |