blob: eac5adc893395e1837008c0166ddec5729c424d6 [file] [log] [blame]
Jean-Jacques Hiblot72e50162017-04-24 11:51:27 +02001/*
2 * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
3 * Written by Jean-Jacques Hiblot <jjhiblot@ti.com>
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#ifndef __GENERIC_PHY_H
9#define __GENERIC_PHY_H
10
11
12/**
13 * struct phy - A handle to (allowing control of) a single phy port.
14 *
15 * Clients provide storage for phy handles. The content of the structure is
16 * managed solely by the PHY API and PHY drivers. A phy struct is
17 * initialized by "get"ing the phy struct. The phy struct is passed to all
18 * other phy APIs to identify which PHY port to operate upon.
19 *
20 * @dev: The device which implements the PHY port.
21 * @id: The PHY ID within the provider.
22 *
23 */
24struct phy {
25 struct udevice *dev;
26 unsigned long id;
27};
28
29/*
30 * struct udevice_ops - set of function pointers for phy operations
31 * @init: operation to be performed for initializing phy (optional)
32 * @exit: operation to be performed while exiting (optional)
33 * @reset: reset the phy (optional).
34 * @power_on: powering on the phy (optional)
35 * @power_off: powering off the phy (optional)
36 */
37struct phy_ops {
38 /**
39 * of_xlate - Translate a client's device-tree (OF) phy specifier.
40 *
41 * The PHY core calls this function as the first step in implementing
42 * a client's generic_phy_get_by_*() call.
43 *
44 * If this function pointer is set to NULL, the PHY core will use a
45 * default implementation, which assumes #phy-cells = <0> or
46 * #phy-cells = <1>, and in the later case that the DT cell
47 * contains a simple integer PHY port ID.
48 *
49 * @phy: The phy struct to hold the translation result.
50 * @args: The phy specifier values from device tree.
51 * @return 0 if OK, or a negative error code.
52 */
Simon Glass23558bb2017-05-18 20:09:47 -060053 int (*of_xlate)(struct phy *phy, struct ofnode_phandle_args *args);
Jean-Jacques Hiblot72e50162017-04-24 11:51:27 +020054
55 /**
56 * init - initialize the hardware.
57 *
58 * Hardware intialization should not be done in during probe() but
59 * should be implemented in this init() function. It could be starting
60 * PLL, taking a controller out of reset, routing, etc. This function
61 * is typically called only once per PHY port.
62 * If power_on() is not implemented, it must power up the phy.
63 *
64 * @phy: the PHY port to initialize
65 * @return 0 if OK, or a negative error code.
66 */
67 int (*init)(struct phy *phy);
68
69 /**
70 * exit - de-initialize the PHY device
71 *
72 * Hardware de-intialization should be done here. Every step done in
73 * init() should be undone here.
74 * This could be used to suspend the phy to reduce power consumption or
75 * to put the phy in a known condition before booting the OS (though it
76 * is NOT called automatically before booting the OS)
77 * If power_off() is not implemented, it must power down the phy.
78 *
79 * @phy: PHY port to be de-initialized
80 * @return 0 if OK, or a negative error code
81 */
82 int (*exit)(struct phy *phy);
83
84 /**
85 * reset - resets a PHY device without shutting down
86 *
87 * @phy: PHY port to be reset
88 *
89 * During runtime, the PHY may need to be reset in order to
90 * re-establish connection etc without being shut down or exit.
91 *
92 * @return 0 if OK, or a negative error code
93 */
94 int (*reset)(struct phy *phy);
95
96 /**
97 * power_on - power on a PHY device
98 *
99 * @phy: PHY port to be powered on
100 *
101 * During runtime, the PHY may need to be powered on or off several
102 * times. This function is used to power on the PHY. It relies on the
103 * setup done in init(). If init() is not implemented, it must take care
104 * of setting up the context (PLLs, ...)
105 *
106 * @return 0 if OK, or a negative error code
107 */
108 int (*power_on)(struct phy *phy);
109
110 /**
111 * power_off - power off a PHY device
112 *
113 * @phy: PHY port to be powered off
114 *
115 * During runtime, the PHY may need to be powered on or off several
116 * times. This function is used to power off the PHY. Except if
117 * init()/deinit() are not implemented, it must not de-initialize
118 * everything.
119 *
120 * @return 0 if OK, or a negative error code
121 */
122 int (*power_off)(struct phy *phy);
123};
124
Patrice Chotardd9fb7be2017-07-24 17:07:02 +0200125#ifdef CONFIG_PHY
Jean-Jacques Hiblot72e50162017-04-24 11:51:27 +0200126
127/**
128 * generic_phy_init() - initialize the PHY port
129 *
130 * @phy: the PHY port to initialize
131 * @return 0 if OK, or a negative error code
132 */
133int generic_phy_init(struct phy *phy);
134
135/**
136 * generic_phy_init() - de-initialize the PHY device
137 *
138 * @phy: PHY port to be de-initialized
139 * @return 0 if OK, or a negative error code
140 */
141int generic_phy_exit(struct phy *phy);
142
143/**
144 * generic_phy_reset() - resets a PHY device without shutting down
145 *
146 * @phy: PHY port to be reset
147 *@return 0 if OK, or a negative error code
148 */
149int generic_phy_reset(struct phy *phy);
150
151/**
152 * generic_phy_power_on() - power on a PHY device
153 *
154 * @phy: PHY port to be powered on
155 * @return 0 if OK, or a negative error code
156 */
157int generic_phy_power_on(struct phy *phy);
158
159/**
160 * generic_phy_power_off() - power off a PHY device
161 *
162 * @phy: PHY port to be powered off
163 * @return 0 if OK, or a negative error code
164 */
165int generic_phy_power_off(struct phy *phy);
166
167
168/**
169 * generic_phy_get_by_index() - Get a PHY device by integer index.
170 *
171 * @user: the client device
172 * @index: The index in the list of available PHYs
173 * @phy: A pointer to the PHY port
174 *
175 * This looks up a PHY device for a client device based on its position in the
176 * list of the possible PHYs.
177 *
178 * example:
179 * usb1: usb_otg_ss@xxx {
180 * compatible = "xxx";
181 * reg = <xxx>;
182 * .
183 * .
184 * phys = <&usb2_phy>, <&usb3_phy>;
185 * .
186 * .
187 * };
188 * the USB2 phy can be accessed by passing index '0' and the USB3 phy can
189 * be accessed by passing index '1'
190 *
191 * @return 0 if OK, or a negative error code
192 */
193int generic_phy_get_by_index(struct udevice *user, int index,
194 struct phy *phy);
195
196/**
197 * generic_phy_get_by_name() - Get a PHY device by its name.
198 *
199 * @user: the client device
200 * @phy_name: The name of the PHY in the list of possible PHYs
201 * @phy: A pointer to the PHY port
202 *
203 * This looks up a PHY device for a client device in the
204 * list of the possible PHYs based on its name.
205 *
206 * example:
207 * usb1: usb_otg_ss@xxx {
208 * compatible = "xxx";
209 * reg = <xxx>;
210 * .
211 * .
212 * phys = <&usb2_phy>, <&usb3_phy>;
213 * phy-names = "usb2phy", "usb3phy";
214 * .
215 * .
216 * };
217 * the USB3 phy can be accessed using "usb3phy", and USB2 by using "usb2phy"
218 *
219 * @return 0 if OK, or a negative error code
220 */
221int generic_phy_get_by_name(struct udevice *user, const char *phy_name,
222 struct phy *phy);
223
Patrice Chotardd9fb7be2017-07-24 17:07:02 +0200224#else /* CONFIG_PHY */
225
226static inline int generic_phy_init(struct phy *phy)
227{
228 return 0;
229}
230
231static inline int generic_phy_exit(struct phy *phy)
232{
233 return 0;
234}
235
236static inline int generic_phy_reset(struct phy *phy)
237{
238 return 0;
239}
240
241static inline int generic_phy_power_on(struct phy *phy)
242{
243 return 0;
244}
245
246static inline int generic_phy_power_off(struct phy *phy)
247{
248 return 0;
249}
250
251static inline int generic_phy_get_by_index(struct udevice *user, int index,
252 struct phy *phy)
253{
254 return 0;
255}
256
257static inline int generic_phy_get_by_name(struct udevice *user, const char *phy_name,
258 struct phy *phy)
259{
260 return 0;
261}
262
263#endif /* CONFIG_PHY */
264
Patrice Chotardb94888b2017-07-18 11:38:43 +0200265/**
266 * generic_phy_valid() - check if PHY port is valid
267 *
268 * @phy: the PHY port to check
269 * @return TRUE if valid, or FALSE
270 */
271static inline bool generic_phy_valid(struct phy *phy)
272{
273 return phy->dev != NULL;
274}
275
Jean-Jacques Hiblot72e50162017-04-24 11:51:27 +0200276#endif /*__GENERIC_PHY_H */