| Marcel Ziswiler | d0399a4 | 2022-07-21 15:27:26 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright (C) 2021 PHYTEC Messtechnik GmbH |
| 4 | * Author: Yunus Bas <y.bas@phytec.de> |
| 5 | */ |
| 6 | |
| 7 | #include <dt-bindings/gpio/gpio.h> |
| 8 | #include <dt-bindings/interrupt-controller/irq.h> |
| 9 | |
| 10 | / { |
| 11 | reg_wl_en: regulator-wl-en { |
| 12 | compatible = "regulator-fixed"; |
| 13 | regulator-name = "wlan_en"; |
| 14 | regulator-min-microvolt = <3300000>; |
| 15 | regulator-max-microvolt = <3300000>; |
| 16 | pinctrl-names = "default"; |
| 17 | pinctrl-0 = <&pinctrl_wl>; |
| 18 | gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; |
| 19 | enable-active-high; |
| 20 | startup-delay-us = <100>; |
| 21 | status = "disabled"; |
| 22 | }; |
| 23 | }; |
| 24 | |
| 25 | &uart3 { |
| 26 | pinctrl-names = "default"; |
| 27 | pinctrl-0 = <&pinctrl_uart3_bt>; |
| 28 | uart-has-rtscts; |
| 29 | |
| 30 | bluetooth { |
| 31 | compatible = "brcm,bcm43438-bt"; |
| 32 | shutdown-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; |
| 33 | device-wakeup-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; |
| 34 | host-wakeup-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; |
| 35 | status = "disabled"; |
| 36 | }; |
| 37 | }; |
| 38 | |
| 39 | &usdhc3 { |
| 40 | #address-cells = <1>; |
| 41 | #size-cells = <0>; |
| 42 | pinctrl-names = "default"; |
| 43 | pinctrl-0 = <&pinctrl_usdhc3_wl>; |
| 44 | vmmc-supply = <®_wl_en>; |
| 45 | bus-width = <4>; |
| 46 | non-removable; |
| 47 | no-1-8-v; |
| 48 | status = "disabled"; |
| 49 | |
| 50 | brmcf: wifi@1 { |
| 51 | compatible = "brcm,bcm4329-fmac"; |
| 52 | reg = <1>; |
| 53 | }; |
| 54 | }; |
| 55 | |
| 56 | &iomuxc { |
| 57 | pinctrl_uart3_bt: uart3grp-bt { |
| 58 | fsl,pins = < |
| 59 | MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 |
| 60 | MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 |
| 61 | MX6QDL_PAD_EIM_EB3__UART3_RTS_B 0x1b0b1 |
| 62 | MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 |
| 63 | MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0xb0b1 /* BT ENABLE */ |
| 64 | MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0xb0b1 /* DEV WAKEUP */ |
| 65 | MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0xb0b1 /* HOST WAKEUP */ |
| 66 | >; |
| 67 | }; |
| 68 | |
| 69 | pinctrl_usdhc3_wl: usdhc3grp-wl { |
| 70 | fsl,pins = < |
| 71 | MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 |
| 72 | MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 |
| 73 | MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 |
| 74 | MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 |
| 75 | MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 |
| 76 | MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 |
| 77 | >; |
| 78 | }; |
| 79 | |
| 80 | pinctrl_wl: wlgrp { |
| 81 | fsl,pins = < |
| 82 | MX6QDL_PAD_EIM_A25__GPIO5_IO02 0xb0b1 /* WLAN ENABLE */ |
| 83 | >; |
| 84 | }; |
| 85 | }; |