blob: 748ddb3b1570ac83032294615cb6acb602df9d1f [file] [log] [blame]
Mike Frysingerd9a5d112008-10-12 20:59:12 -04001/*
2 * U-boot - Configuration file for BF537 STAMP board
3 */
4
5#ifndef __CONFIG_BF527_EZKIT_H__
6#define __CONFIG_BF527_EZKIT_H__
7
Mike Frysingerf348ab82009-04-24 17:22:40 -04008#include <asm/config-pre.h>
Mike Frysingerd9a5d112008-10-12 20:59:12 -04009
10
11/*
12 * Processor Settings
13 */
Mike Frysingerfbcf8e82010-12-23 14:58:37 -050014#define CONFIG_BFIN_CPU bf527-0.0
Mike Frysingerd9a5d112008-10-12 20:59:12 -040015#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA
16
17
18/*
19 * Clock Settings
20 * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
21 * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
22 */
23/* CONFIG_CLKIN_HZ is any value in Hz */
24#define CONFIG_CLKIN_HZ 25000000
25/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
26/* 1 = CLKIN / 2 */
27#define CONFIG_CLKIN_HALF 0
28/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
29/* 1 = bypass PLL */
30#define CONFIG_PLL_BYPASS 0
31/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
32/* Values can range from 0-63 (where 0 means 64) */
33#define CONFIG_VCO_MULT 21
34/* CCLK_DIV controls the core clock divider */
35/* Values can be 1, 2, 4, or 8 ONLY */
36#define CONFIG_CCLK_DIV 1
37/* SCLK_DIV controls the system clock divider */
38/* Values can range from 1-15 */
39#define CONFIG_SCLK_DIV 4
40
41
42/*
43 * Memory Settings
44 */
45#define CONFIG_MEM_ADD_WDTH 10
46#define CONFIG_MEM_SIZE 64
47
48#define CONFIG_EBIU_SDRRC_VAL 0x03F6
49#define CONFIG_EBIU_SDGCTL_VAL (SCTLE | CL_3 | PASR_ALL | TRAS_6 | TRP_3 | TRCD_3 | TWR_2 | PSS)
50
51#define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL)
52#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL)
53#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL)
54
55#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
56#define CONFIG_SYS_MALLOC_LEN (640 * 1024)
57
58
59/*
60 * NAND Settings
61 * (can't be used same time as ethernet)
62 */
63#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
Mike Frysingerb7659ef2009-11-11 17:29:35 -050064# define CONFIG_BFIN_NFC
65# define CONFIG_BFIN_NFC_BOOTROM_ECC
Mike Frysingerd9a5d112008-10-12 20:59:12 -040066#endif
67#ifdef CONFIG_BFIN_NFC
68#define CONFIG_BFIN_NFC_CTL_VAL 0x0033
69#define CONFIG_DRIVER_NAND_BFIN
70#define CONFIG_SYS_NAND_BASE 0 /* not actually used */
71#define CONFIG_SYS_MAX_NAND_DEVICE 1
Mike Frysingerd9a5d112008-10-12 20:59:12 -040072#endif
73
74
75/*
76 * Network Settings
77 */
78#if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) && \
79 !defined(__ADSPBF524__) && !defined(__ADSPBF525__) && !defined(CONFIG_BFIN_NFC)
80#define ADI_CMDS_NETWORK 1
81#define CONFIG_BFIN_MAC
82#define CONFIG_RMII
83#define CONFIG_NETCONSOLE 1
Mike Frysingerd9a5d112008-10-12 20:59:12 -040084#endif
85#define CONFIG_HOSTNAME bf527-ezkit
86/* Uncomment next line to use fixed MAC address */
87/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */
88
89
90/*
91 * Flash Settings
92 */
93#define CONFIG_FLASH_CFI_DRIVER
94#define CONFIG_SYS_FLASH_BASE 0x20000000
95#define CONFIG_SYS_FLASH_CFI
96#define CONFIG_SYS_FLASH_PROTECTION
97#define CONFIG_SYS_MAX_FLASH_BANKS 1
98#define CONFIG_SYS_MAX_FLASH_SECT 259
99
100
101/*
102 * SPI Settings
103 */
104#define CONFIG_BFIN_SPI
105#define CONFIG_ENV_SPI_MAX_HZ 30000000
Mike Frysingerafac8b02009-06-14 22:29:35 -0400106#define CONFIG_SF_DEFAULT_SPEED 30000000
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400107#define CONFIG_SPI_FLASH
108#define CONFIG_SPI_FLASH_STMICRO
109
110
111/*
112 * Env Storage Settings
113 */
114#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
115#define CONFIG_ENV_IS_IN_SPI_FLASH
Mike Frysinger53310b82009-05-05 01:35:41 -0400116#define CONFIG_ENV_OFFSET 0x10000
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400117#define CONFIG_ENV_SIZE 0x2000
Mike Frysinger53310b82009-05-05 01:35:41 -0400118#define CONFIG_ENV_SECT_SIZE 0x10000
Mike Frysingerb7659ef2009-11-11 17:29:35 -0500119#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
120#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
121#define CONFIG_ENV_IS_IN_NAND
122#define CONFIG_ENV_OFFSET 0x40000
123#define CONFIG_ENV_SIZE 0x20000
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400124#else
125#define CONFIG_ENV_IS_IN_FLASH
126#define CONFIG_ENV_OFFSET 0x4000
127#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
128#define CONFIG_ENV_SIZE 0x2000
129#define CONFIG_ENV_SECT_SIZE 0x2000
Mike Frysinger76d82182009-07-21 22:17:36 -0400130#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
Mike Frysingerb7659ef2009-11-11 17:29:35 -0500131#endif
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400132
133
134/*
135 * I2C Settings
136 */
137#define CONFIG_BFIN_TWI_I2C 1
138#define CONFIG_HARD_I2C 1
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400139
140
141/*
142 * USB Settings
143 */
144#if !defined(__ADSPBF522__) && !defined(__ADSPBF523__)
145#define CONFIG_USB
146#define CONFIG_MUSB_HCD
147#define CONFIG_USB_BLACKFIN
148#define CONFIG_USB_STORAGE
149#define CONFIG_MUSB_TIMEOUT 100000
150#endif
151
Sonic Zhang955020c2013-02-20 18:05:16 +0800152/* Don't waste time transferring a logo over the UART */
153#if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
154/*# define CONFIG_VIDEO*/
155#endif
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400156
157/*
Michael Hennerich10eafa12009-12-10 09:19:21 +0000158 * Video Settings
159 */
Sonic Zhang955020c2013-02-20 18:05:16 +0800160#ifdef CONFIG_VIDEO
Wolfgang Denkd24f2d32010-10-04 19:58:00 +0200161#ifdef CONFIG_BF527_EZKIT_REV_2_1
Michael Hennerich10eafa12009-12-10 09:19:21 +0000162# define CONFIG_LQ035Q1_SPI_BUS 0
163# define CONFIG_LQ035Q1_SPI_CS 7
Mike Frysinger42c6e9a2012-02-03 20:44:54 -0500164# define CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI
165#else
166# define CONFIG_LQ035Q1_USE_RGB888_8_BIT_PPI
167#endif
168
169#ifdef CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI
170# define EASYLOGO_HEADER <asm/bfin_logo_rgb565_230x230_lzma.h>
171#else
172# define EASYLOGO_HEADER <asm/bfin_logo_230x230_lzma.h>
Michael Hennerich10eafa12009-12-10 09:19:21 +0000173#endif
Sonic Zhang955020c2013-02-20 18:05:16 +0800174#endif /* CONFIG_VIDEO */
Michael Hennerich10eafa12009-12-10 09:19:21 +0000175
176/*
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400177 * Misc Settings
178 */
179#define CONFIG_MISC_INIT_R
180#define CONFIG_RTC_BFIN
181#define CONFIG_UART_CONSOLE 1
Masahiro Yamadae91df492014-03-05 16:59:37 +0900182#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400183
184/*
185 * Pull in common ADI header for remaining command/environment setup
186 */
187#include <configs/bfin_adi_common.h>
188
Mike Frysingerd9a5d112008-10-12 20:59:12 -0400189#endif