blob: dee2b11056e79d1f42d219f997e4c0416393c22a [file] [log] [blame]
Lokesh Vutla3ef5ebe2013-02-17 23:34:35 +00001/*
2 * (C) Copyright 2013
3 * Texas Instruments Incorporated.
4 * Lokesh Vutla <lokeshvutla@ti.com>
5 *
6 * Configuration settings for the TI DRA7XX board.
Enric Balletbò i Serra3d657a02013-12-06 21:30:19 +01007 * See ti_omap5_common.h for omap5 common settings.
Lokesh Vutla3ef5ebe2013-02-17 23:34:35 +00008 *
Wolfgang Denk3765b3e2013-10-07 13:07:26 +02009 * SPDX-License-Identifier: GPL-2.0+
Lokesh Vutla3ef5ebe2013-02-17 23:34:35 +000010 */
11
12#ifndef __CONFIG_DRA7XX_EVM_H
13#define __CONFIG_DRA7XX_EVM_H
14
Tom Rinia8017572013-08-09 11:22:18 -040015#define CONFIG_DRA7XX
Lokesh Vutla7b922522014-08-04 19:42:24 +053016#define CONFIG_BOARD_EARLY_INIT_F
Tom Rinia8017572013-08-09 11:22:18 -040017
Tom Rini79b079f2014-04-03 07:52:56 -040018#ifndef CONFIG_QSPI_BOOT
Lokesh Vutlad3d33da2013-08-23 17:27:04 +053019/* MMC ENV related defines */
20#define CONFIG_ENV_IS_IN_MMC
21#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
Tom Rini2737f012014-04-03 07:52:52 -040022#define CONFIG_ENV_SIZE (128 << 10)
Lokesh Vutlad3d33da2013-08-23 17:27:04 +053023#define CONFIG_ENV_OFFSET 0xE0000
24#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
25#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
Tom Rini79b079f2014-04-03 07:52:56 -040026#endif
Lokesh Vutlad3d33da2013-08-23 17:27:04 +053027#define CONFIG_CMD_SAVEENV
Tom Rini9552ee32013-04-05 06:21:45 +000028
Minal Shaha13cbf52013-10-04 14:52:02 -040029#if (CONFIG_CONS_INDEX == 1)
Tom Rinia8017572013-08-09 11:22:18 -040030#define CONSOLEDEV "ttyO0"
Minal Shaha13cbf52013-10-04 14:52:02 -040031#elif (CONFIG_CONS_INDEX == 3)
32#define CONSOLEDEV "ttyO2"
33#endif
34#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
35#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
36#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
Sricharan R378bd1f2013-05-30 03:19:33 +000037#define CONFIG_BAUDRATE 115200
Lokesh Vutla97405d82013-05-30 03:19:38 +000038
39#define CONFIG_SYS_OMAP_ABE_SYSCK
Dan Murphy45dbbf22013-06-11 11:22:30 -050040
Tom Rini2efa79a2014-01-21 17:15:08 -050041/* Define the default GPT table for eMMC */
42#define PARTS_DEFAULT \
43 "uuid_disk=${uuid_gpt_disk};" \
44 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
45
Enric Balletbò i Serra3d657a02013-12-06 21:30:19 +010046#include <configs/ti_omap5_common.h>
Dan Murphy45dbbf22013-06-11 11:22:30 -050047
Tom Rini2efa79a2014-01-21 17:15:08 -050048/* Enhance our eMMC support / experience. */
49#define CONFIG_CMD_GPT
50#define CONFIG_EFI_PARTITION
Lubomir Popov8065a4e2014-11-10 18:14:18 +020051#define CONFIG_HSMMC2_8BIT
Tom Rini2efa79a2014-01-21 17:15:08 -050052
Mugunthan V Nc9be62c2013-07-08 16:04:43 +053053/* CPSW Ethernet */
Tom Rini457bb502013-08-20 08:53:54 -040054#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */
Mugunthan V Nc9be62c2013-07-08 16:04:43 +053055#define CONFIG_CMD_DHCP
Tom Rini457bb502013-08-20 08:53:54 -040056#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
Mugunthan V Nc9be62c2013-07-08 16:04:43 +053057#define CONFIG_BOOTP_DNS2
58#define CONFIG_BOOTP_SEND_HOSTNAME
59#define CONFIG_BOOTP_GATEWAY
60#define CONFIG_BOOTP_SUBNETMASK
Tom Rini457bb502013-08-20 08:53:54 -040061#define CONFIG_NET_RETRY_COUNT 10
62#define CONFIG_CMD_PING
63#define CONFIG_CMD_MII
64#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
65#define CONFIG_MII /* Required in net/eth.c */
66#define CONFIG_PHY_GIGE /* per-board part of CPSW */
Mugunthan V Nc9be62c2013-07-08 16:04:43 +053067#define CONFIG_PHYLIB
Mugunthan V Nc9be62c2013-07-08 16:04:43 +053068
Matt Porter247cdf02013-10-07 15:53:03 +053069/* SPI */
70#undef CONFIG_OMAP3_SPI
71#define CONFIG_TI_QSPI
72#define CONFIG_SPI_FLASH
73#define CONFIG_SPI_FLASH_SPANSION
74#define CONFIG_CMD_SF
75#define CONFIG_CMD_SPI
Poddar, Sourav2c57b032013-11-14 21:01:14 +053076#define CONFIG_SPI_FLASH_BAR
Matt Porter247cdf02013-10-07 15:53:03 +053077#define CONFIG_TI_SPI_MMAP
78#define CONFIG_SF_DEFAULT_SPEED 48000000
79#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
80
Tom Rini79b079f2014-04-03 07:52:56 -040081/*
82 * Default to using SPI for environment, etc.
83 * 0x000000 - 0x010000 : QSPI.SPL (64KiB)
84 * 0x010000 - 0x020000 : QSPI.SPL.backup1 (64KiB)
85 * 0x020000 - 0x030000 : QSPI.SPL.backup2 (64KiB)
86 * 0x030000 - 0x040000 : QSPI.SPL.backup3 (64KiB)
87 * 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
88 * 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
89 * 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
90 * 0x1D0000 - 0x1E0000 : QSPI.u-boot-env.backup1 (64KiB)
91 * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB)
92 * 0x9E0000 - 0x2000000 : USERLAND
93 */
94#define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000
95#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
96#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
97#if defined(CONFIG_QSPI_BOOT)
98/* In SPL, use the environment and discard MMC support for space. */
99#ifdef CONFIG_SPL_BUILD
100#undef CONFIG_SPL_MMC_SUPPORT
101#undef CONFIG_SPL_MAX_SIZE
102#define CONFIG_SPL_MAX_SIZE (64 << 10) /* 64 KiB */
103#endif
104#define CONFIG_SPL_ENV_SUPPORT
105#define CONFIG_ENV_IS_IN_SPI_FLASH
106#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
107#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
108#define CONFIG_ENV_SIZE (64 << 10)
109#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */
110#define CONFIG_ENV_OFFSET 0x1C0000
111#define CONFIG_ENV_OFFSET_REDUND 0x1D0000
112#endif
113
Matt Porter247cdf02013-10-07 15:53:03 +0530114/* SPI SPL */
115#define CONFIG_SPL_SPI_SUPPORT
116#define CONFIG_SPL_SPI_LOAD
117#define CONFIG_SPL_SPI_FLASH_SUPPORT
Tom Rini79b079f2014-04-03 07:52:56 -0400118#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
Matt Porter247cdf02013-10-07 15:53:03 +0530119
Tom Rinib818d9a2014-02-05 10:24:25 -0500120#define CONFIG_SUPPORT_EMMC_BOOT
121
Dan Murphy834e91a2013-10-11 12:28:17 -0500122/* USB xHCI HOST */
123#define CONFIG_CMD_USB
124#define CONFIG_USB_HOST
125#define CONFIG_USB_XHCI
126#define CONFIG_USB_XHCI_OMAP
127#define CONFIG_USB_STORAGE
128#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
129
130#define CONFIG_OMAP_USB_PHY
131#define CONFIG_OMAP_USB2PHY2_HOST
132
Roger Quadros21914ee2013-11-11 16:56:44 +0200133/* SATA */
134#define CONFIG_BOARD_LATE_INIT
135#define CONFIG_CMD_SCSI
136#define CONFIG_LIBATA
137#define CONFIG_SCSI_AHCI
138#define CONFIG_SCSI_AHCI_PLAT
139#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
140#define CONFIG_SYS_SCSI_MAX_LUN 1
141#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
142 CONFIG_SYS_SCSI_MAX_LUN)
143
pekon gupta54a97d22014-07-22 16:03:23 +0530144/* NAND support */
145#ifdef CONFIG_NAND
146/* NAND: device related configs */
147#define CONFIG_SYS_NAND_PAGE_SIZE 2048
148#define CONFIG_SYS_NAND_OOBSIZE 64
149#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
150#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
151#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
152 CONFIG_SYS_NAND_PAGE_SIZE)
153#define CONFIG_SYS_NAND_5_ADDR_CYCLE
154/* NAND: driver related configs */
155#define CONFIG_NAND_OMAP_GPMC
156#define CONFIG_NAND_OMAP_ELM
157#define CONFIG_SYS_NAND_ONFI_DETECTION
158#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
159#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
160#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
161 10, 11, 12, 13, 14, 15, 16, 17, \
162 18, 19, 20, 21, 22, 23, 24, 25, \
163 26, 27, 28, 29, 30, 31, 32, 33, \
164 34, 35, 36, 37, 38, 39, 40, 41, \
165 42, 43, 44, 45, 46, 47, 48, 49, \
166 50, 51, 52, 53, 54, 55, 56, 57, }
167#define CONFIG_SYS_NAND_ECCSIZE 512
168#define CONFIG_SYS_NAND_ECCBYTES 14
169#define MTDIDS_DEFAULT "nand0=nand.0"
170#define MTDPARTS_DEFAULT "mtdparts=nand.0:" \
171 "128k(NAND.SPL)," \
172 "128k(NAND.SPL.backup1)," \
173 "128k(NAND.SPL.backup2)," \
174 "128k(NAND.SPL.backup3)," \
175 "256k(NAND.u-boot-spl-os)," \
176 "1m(NAND.u-boot)," \
177 "128k(NAND.u-boot-env)," \
178 "128k(NAND.u-boot-env.backup1)," \
179 "8m(NAND.kernel)," \
180 "-(NAND.rootfs)"
181#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000
182/* NAND: SPL related configs */
183#ifdef CONFIG_SPL_NAND_SUPPORT
184#define CONFIG_SPL_NAND_AM33XX_BCH
185#endif
186/* NAND: SPL falcon mode configs */
187#ifdef CONFIG_SPL_OS_BOOT
188#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os-boot params*/
189#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
190#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
191#endif
192#endif /* !CONFIG_NAND */
193
pekon gupta93526972014-07-22 16:03:24 +0530194/* Parallel NOR Support */
195#if defined(CONFIG_NOR)
196/* NOR: device related configs */
197#define CONFIG_SYS_MAX_FLASH_SECT 512
198#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
199#define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */
200/* #define CONFIG_INIT_IGNORE_ERROR */
201#undef CONFIG_SYS_NO_FLASH
202#define CONFIG_CMD_FLASH
203#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
204#define CONFIG_SYS_FLASH_PROTECTION
205#define CONFIG_SYS_FLASH_CFI
206#define CONFIG_FLASH_CFI_DRIVER
207#define CONFIG_FLASH_CFI_MTD
208#define CONFIG_SYS_MAX_FLASH_BANKS 1
209#define CONFIG_SYS_FLASH_BASE (0x08000000)
210#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
211/* Reduce SPL size by removing unlikey targets */
212#ifdef CONFIG_NOR_BOOT
213#define CONFIG_ENV_IS_IN_FLASH
214#define CONFIG_ENV_SECT_SIZE (128 * 1024) /* 128 KiB */
215#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
216#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \
217 "128k(NOR.SPL)," \
218 "128k(NOR.SPL.backup1)," \
219 "128k(NOR.SPL.backup2)," \
220 "128k(NOR.SPL.backup3)," \
221 "256k(NOR.u-boot-spl-os)," \
222 "1m(NOR.u-boot)," \
223 "128k(NOR.u-boot-env)," \
224 "128k(NOR.u-boot-env.backup1)," \
225 "8m(NOR.kernel)," \
226 "-(NOR.rootfs)"
227#define CONFIG_ENV_OFFSET 0x001c0000
228#define CONFIG_ENV_OFFSET_REDUND 0x001e0000
229#endif
230#endif /* NOR support */
231
Lokesh Vutla3ef5ebe2013-02-17 23:34:35 +0000232#endif /* __CONFIG_DRA7XX_EVM_H */