Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Mark Langsdorf | ef51c41 | 2015-06-05 00:58:49 +0100 | [diff] [blame] | 2 | /* |
| 3 | * Copyright 2012 Calxeda, Inc. |
Mark Langsdorf | ef51c41 | 2015-06-05 00:58:49 +0100 | [diff] [blame] | 4 | */ |
| 5 | |
| 6 | #include <common.h> |
| 7 | #include <ahci.h> |
| 8 | #include <asm/io.h> |
| 9 | |
| 10 | #define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f)) |
| 11 | #define CPHY_ADDR(base, dev, addr) ((base) | (((addr) & 0x1ff) << 2)) |
| 12 | #define CPHY_BASE 0xfff58000 |
| 13 | #define CPHY_WIDTH 0x1000 |
| 14 | #define CPHY_DTE_XS 5 |
| 15 | #define CPHY_MII 31 |
| 16 | #define SERDES_CR_CTL 0x80a0 |
| 17 | #define SERDES_CR_ADDR 0x80a1 |
| 18 | #define SERDES_CR_DATA 0x80a2 |
| 19 | #define CR_BUSY 0x0001 |
| 20 | #define CR_START 0x0001 |
| 21 | #define CR_WR_RDN 0x0002 |
| 22 | #define CPHY_TX_INPUT_STS 0x2001 |
| 23 | #define CPHY_RX_INPUT_STS 0x2002 |
| 24 | #define CPHY_SATA_TX_OVERRIDE_BIT 0x8000 |
| 25 | #define CPHY_SATA_RX_OVERRIDE_BIT 0x4000 |
| 26 | #define CPHY_TX_INPUT_OVERRIDE 0x2004 |
| 27 | #define CPHY_RX_INPUT_OVERRIDE 0x2005 |
| 28 | #define SPHY_LANE 0x100 |
| 29 | #define SPHY_HALF_RATE 0x0001 |
| 30 | #define CPHY_SATA_DPLL_MODE 0x0700 |
| 31 | #define CPHY_SATA_DPLL_SHIFT 8 |
| 32 | #define CPHY_SATA_TX_ATTEN 0x1c00 |
| 33 | #define CPHY_SATA_TX_ATTEN_SHIFT 10 |
| 34 | |
| 35 | #define HB_SREG_SATA_ATTEN 0xfff3cf24 |
| 36 | |
| 37 | #define SATA_PORT_BASE 0xffe08000 |
| 38 | #define SATA_VERSIONR 0xf8 |
| 39 | #define SATA_HB_VERSION 0x3332302a |
| 40 | |
| 41 | static u32 __combo_phy_reg_read(u8 phy, u8 dev, u32 addr) |
| 42 | { |
| 43 | u32 data; |
| 44 | writel(CPHY_MAP(dev, addr), CPHY_BASE + 0x800 + CPHY_WIDTH * phy); |
| 45 | data = readl(CPHY_ADDR(CPHY_BASE + CPHY_WIDTH * phy, dev, addr)); |
| 46 | return data; |
| 47 | } |
| 48 | |
| 49 | static void __combo_phy_reg_write(u8 phy, u8 dev, u32 addr, u32 data) |
| 50 | { |
| 51 | writel(CPHY_MAP(dev, addr), CPHY_BASE + 0x800 + CPHY_WIDTH * phy); |
| 52 | writel(data, CPHY_ADDR(CPHY_BASE + CPHY_WIDTH * phy, dev, addr)); |
| 53 | } |
| 54 | |
| 55 | static u32 combo_phy_read(u8 phy, u32 addr) |
| 56 | { |
| 57 | u8 dev = CPHY_DTE_XS; |
| 58 | if (phy == 5) |
| 59 | dev = CPHY_MII; |
| 60 | while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY) |
| 61 | udelay(5); |
| 62 | __combo_phy_reg_write(phy, dev, SERDES_CR_ADDR, addr); |
| 63 | __combo_phy_reg_write(phy, dev, SERDES_CR_CTL, CR_START); |
| 64 | while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY) |
| 65 | udelay(5); |
| 66 | return __combo_phy_reg_read(phy, dev, SERDES_CR_DATA); |
| 67 | } |
| 68 | |
| 69 | static void combo_phy_write(u8 phy, u32 addr, u32 data) |
| 70 | { |
| 71 | u8 dev = CPHY_DTE_XS; |
| 72 | if (phy == 5) |
| 73 | dev = CPHY_MII; |
| 74 | while (__combo_phy_reg_read(phy, dev, SERDES_CR_CTL) & CR_BUSY) |
| 75 | udelay(5); |
| 76 | __combo_phy_reg_write(phy, dev, SERDES_CR_ADDR, addr); |
| 77 | __combo_phy_reg_write(phy, dev, SERDES_CR_DATA, data); |
| 78 | __combo_phy_reg_write(phy, dev, SERDES_CR_CTL, CR_WR_RDN | CR_START); |
| 79 | } |
| 80 | |
| 81 | static void cphy_spread_spectrum_override(u8 phy, u8 lane, u32 val) |
| 82 | { |
| 83 | u32 tmp; |
| 84 | tmp = combo_phy_read(phy, CPHY_RX_INPUT_STS + lane * SPHY_LANE); |
| 85 | tmp &= ~CPHY_SATA_RX_OVERRIDE_BIT; |
| 86 | combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| 87 | |
| 88 | tmp |= CPHY_SATA_RX_OVERRIDE_BIT; |
| 89 | combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| 90 | |
| 91 | tmp &= ~CPHY_SATA_DPLL_MODE; |
| 92 | tmp |= (val << CPHY_SATA_DPLL_SHIFT) & CPHY_SATA_DPLL_MODE; |
| 93 | combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| 94 | } |
| 95 | |
| 96 | static void cphy_tx_attenuation_override(u8 phy, u8 lane) |
| 97 | { |
| 98 | u32 val; |
| 99 | u32 tmp; |
| 100 | u8 shift; |
| 101 | |
| 102 | shift = ((phy == 5) ? 4 : lane) * 4; |
| 103 | |
| 104 | val = (readl(HB_SREG_SATA_ATTEN) >> shift) & 0xf; |
| 105 | |
| 106 | if (val & 0x8) |
| 107 | return; |
| 108 | |
| 109 | tmp = combo_phy_read(phy, CPHY_TX_INPUT_STS + lane * SPHY_LANE); |
| 110 | tmp &= ~CPHY_SATA_TX_OVERRIDE_BIT; |
| 111 | combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| 112 | |
| 113 | tmp |= CPHY_SATA_TX_OVERRIDE_BIT; |
| 114 | combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| 115 | |
| 116 | tmp |= (val << CPHY_SATA_TX_ATTEN_SHIFT) & CPHY_SATA_TX_ATTEN; |
| 117 | combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| 118 | } |
| 119 | |
| 120 | static void cphy_disable_port_overrides(u8 port) |
| 121 | { |
| 122 | u32 tmp; |
| 123 | u8 lane = 0, phy = 0; |
| 124 | |
| 125 | if (port == 0) |
| 126 | phy = 5; |
| 127 | else if (port < 5) |
| 128 | lane = port - 1; |
| 129 | else |
| 130 | return; |
| 131 | tmp = combo_phy_read(phy, CPHY_RX_INPUT_STS + lane * SPHY_LANE); |
| 132 | tmp &= ~CPHY_SATA_RX_OVERRIDE_BIT; |
| 133 | combo_phy_write(phy, CPHY_RX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| 134 | |
| 135 | tmp = combo_phy_read(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE); |
| 136 | tmp &= ~CPHY_SATA_TX_OVERRIDE_BIT; |
| 137 | combo_phy_write(phy, CPHY_TX_INPUT_OVERRIDE + lane * SPHY_LANE, tmp); |
| 138 | } |
| 139 | |
| 140 | void cphy_disable_overrides(void) |
| 141 | { |
| 142 | int i; |
| 143 | u32 port_map; |
| 144 | |
| 145 | port_map = readl(0xffe08000 + HOST_PORTS_IMPL); |
| 146 | for (i = 0; i < 5; i++) { |
| 147 | if (port_map & (1 << i)) |
| 148 | cphy_disable_port_overrides(i); |
| 149 | } |
| 150 | } |
| 151 | |
| 152 | static void cphy_override_lane(u8 port) |
| 153 | { |
| 154 | u32 tmp, k = 0; |
| 155 | u8 lane = 0, phy = 0; |
| 156 | |
| 157 | if (port == 0) |
| 158 | phy = 5; |
| 159 | else if (port < 5) |
| 160 | lane = port - 1; |
| 161 | else |
| 162 | return; |
| 163 | |
| 164 | do { |
| 165 | tmp = combo_phy_read(0, CPHY_RX_INPUT_STS + |
| 166 | lane * SPHY_LANE); |
| 167 | } while ((tmp & SPHY_HALF_RATE) && (k++ < 1000)); |
| 168 | cphy_spread_spectrum_override(phy, lane, 3); |
| 169 | cphy_tx_attenuation_override(phy, lane); |
| 170 | } |
| 171 | |
| 172 | #define WAIT_MS_LINKUP 4 |
| 173 | |
Simon Glass | 2c9f9ef | 2017-06-14 21:28:32 -0600 | [diff] [blame] | 174 | int ahci_link_up(struct ahci_uc_priv *probe_ent, int port) |
Mark Langsdorf | ef51c41 | 2015-06-05 00:58:49 +0100 | [diff] [blame] | 175 | { |
| 176 | u32 tmp; |
| 177 | int j = 0; |
| 178 | u8 *port_mmio = (u8 *)probe_ent->port[port].port_mmio; |
| 179 | u32 is_highbank = readl(SATA_PORT_BASE + SATA_VERSIONR) == |
| 180 | SATA_HB_VERSION ? 1 : 0; |
| 181 | |
| 182 | /* Bring up SATA link. |
| 183 | * SATA link bringup time is usually less than 1 ms; only very |
| 184 | * rarely has it taken between 1-2 ms. Never seen it above 2 ms. |
| 185 | */ |
| 186 | while (j < WAIT_MS_LINKUP) { |
| 187 | if (is_highbank && (j == 0)) { |
| 188 | cphy_disable_port_overrides(port); |
| 189 | writel(0x301, port_mmio + PORT_SCR_CTL); |
| 190 | udelay(1000); |
| 191 | writel(0x300, port_mmio + PORT_SCR_CTL); |
| 192 | udelay(1000); |
| 193 | cphy_override_lane(port); |
| 194 | } |
| 195 | |
| 196 | tmp = readl(port_mmio + PORT_SCR_STAT); |
| 197 | if ((tmp & 0xf) == 0x3) |
| 198 | return 0; |
| 199 | udelay(1000); |
| 200 | j++; |
| 201 | |
| 202 | if ((j == WAIT_MS_LINKUP) && (tmp & 0xf)) |
| 203 | j = 0; /* retry phy reset */ |
| 204 | } |
| 205 | return 1; |
| 206 | } |