blob: cecff68da3500430a1f6df6af16e62c99dbaf596 [file] [log] [blame]
Dave Liufd0b1fe2008-03-26 22:55:32 +08001/*
2 * Copyright (C) 2007-2008 Freescale Semiconductor, Inc.
3 * Dave Liu <daveliu@freescale.com>
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License as
7 * published by the Free Software Foundation; either version 2 of
8 * the License, or (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
18 * MA 02111-1307 USA
19 */
20
21#ifndef __FSL_SATA_H__
22#define __FSL_SATA_H__
23
24#define SATA_HC_MAX_NUM 4 /* Max host controller numbers */
25#define SATA_HC_MAX_CMD 16 /* Max command queue depth per host controller */
26#define SATA_HC_MAX_PORT 16 /* Max port number per host controller */
27
28/*
29* SATA Host Controller Registers
30*/
31typedef struct fsl_sata_reg {
32 /* SATA command registers */
33 u32 cqr; /* Command queue register */
34 u8 res1[0x4];
35 u32 car; /* Command active register */
36 u8 res2[0x4];
37 u32 ccr; /* Command completed register */
38 u8 res3[0x4];
39 u32 cer; /* Command error register */
40 u8 res4[0x4];
41 u32 der; /* Device error register */
42 u32 chba; /* Command header base address */
43 u32 hstatus; /* Host status register */
44 u32 hcontrol; /* Host control register */
45 u32 cqpmp; /* Port number queue register */
46 u32 sig; /* Signature register */
47 u32 icc; /* Interrupt coalescing control register */
48 u8 res5[0xc4];
49
50 /* SATA supperset registers */
51 u32 sstatus; /* SATA interface status register */
52 u32 serror; /* SATA interface error register */
53 u32 scontrol; /* SATA interface control register */
54 u32 snotification; /* SATA interface notification register */
55 u8 res6[0x30];
56
57 /* SATA control status registers */
58 u32 transcfg; /* Transport layer configuration */
59 u32 transstatus; /* Transport layer status */
60 u32 linkcfg; /* Link layer configuration */
61 u32 linkcfg1; /* Link layer configuration1 */
62 u32 linkcfg2; /* Link layer configuration2 */
63 u32 linkstatus; /* Link layer status */
64 u32 linkstatus1; /* Link layer status1 */
65 u32 phyctrlcfg; /* PHY control configuration */
66 u8 res7[0x2b0];
67
68 /* SATA system control registers */
69 u32 syspr; /* System priority register - big endian */
70 u8 res8[0xbec];
71} __attribute__ ((packed)) fsl_sata_reg_t;
72
73/* HStatus register
74*/
75#define HSTATUS_ONOFF 0x80000000 /* Online/offline status */
76#define HSTATUS_FORCE_OFFLINE 0x40000000 /* In process going offline */
77#define HSTATUS_BIST_ERR 0x20000000
78
79/* Fatal error */
80#define HSTATUS_MASTER_ERR 0x00004000
81#define HSTATUS_DATA_UNDERRUN 0x00002000
82#define HSTATUS_DATA_OVERRUN 0x00001000
83#define HSTATUS_CRC_ERR_TX 0x00000800
84#define HSTATUS_CRC_ERR_RX 0x00000400
85#define HSTATUS_FIFO_OVERFLOW_TX 0x00000200
86#define HSTATUS_FIFO_OVERFLOW_RX 0x00000100
87#define HSTATUS_FATAL_ERR_ALL (HSTATUS_MASTER_ERR | \
88 HSTATUS_DATA_UNDERRUN | \
89 HSTATUS_DATA_OVERRUN | \
90 HSTATUS_CRC_ERR_TX | \
91 HSTATUS_CRC_ERR_RX | \
92 HSTATUS_FIFO_OVERFLOW_TX | \
93 HSTATUS_FIFO_OVERFLOW_RX)
94/* Interrupt status */
95#define HSTATUS_FATAL_ERR 0x00000020
96#define HSTATUS_PHY_RDY 0x00000010
97#define HSTATUS_SIGNATURE 0x00000008
98#define HSTATUS_SNOTIFY 0x00000004
99#define HSTATUS_DEVICE_ERR 0x00000002
100#define HSTATUS_CMD_COMPLETE 0x00000001
101
102/* HControl register
103*/
104#define HCONTROL_ONOFF 0x80000000 /* Online or offline request */
105#define HCONTROL_FORCE_OFFLINE 0x40000000 /* Force offline request */
Timur Tabifbc20aa2011-11-21 17:10:23 -0600106#define HCONTROL_ENTERPRISE_EN 0x10000000 /* Enterprise mode enabled */
Dave Liufd0b1fe2008-03-26 22:55:32 +0800107#define HCONTROL_HDR_SNOOP 0x00000400 /* Command header snoop */
108#define HCONTROL_PMP_ATTACHED 0x00000200 /* Port multiplier attached */
109
110/* Interrupt enable */
111#define HCONTROL_FATAL_ERR 0x00000020
112#define HCONTROL_PHY_RDY 0x00000010
113#define HCONTROL_SIGNATURE 0x00000008
114#define HCONTROL_SNOTIFY 0x00000004
115#define HCONTROL_DEVICE_ERR 0x00000002
116#define HCONTROL_CMD_COMPLETE 0x00000001
117
118#define HCONTROL_INT_EN_ALL (HCONTROL_FATAL_ERR | \
119 HCONTROL_PHY_RDY | \
120 HCONTROL_SIGNATURE | \
121 HCONTROL_SNOTIFY | \
122 HCONTROL_DEVICE_ERR | \
123 HCONTROL_CMD_COMPLETE)
124
125/* SStatus register
126*/
127#define SSTATUS_IPM_MASK 0x00000780
128#define SSTATUS_IPM_NOPRESENT 0x00000000
129#define SSTATUS_IPM_ACTIVE 0x00000080
130#define SSTATUS_IPM_PATIAL 0x00000100
131#define SSTATUS_IPM_SLUMBER 0x00000300
132
133#define SSTATUS_SPD_MASK 0x000000f0
134#define SSTATUS_SPD_GEN1 0x00000010
135#define SSTATUS_SPD_GEN2 0x00000020
136
137#define SSTATUS_DET_MASK 0x0000000f
138#define SSTATUS_DET_NODEVICE 0x00000000
139#define SSTATUS_DET_DISCONNECT 0x00000001
140#define SSTATUS_DET_CONNECT 0x00000003
141#define SSTATUS_DET_PHY_OFFLINE 0x00000004
142
143/* SControl register
144*/
145#define SCONTROL_SPM_MASK 0x0000f000
146#define SCONTROL_SPM_GO_PARTIAL 0x00001000
147#define SCONTROL_SPM_GO_SLUMBER 0x00002000
148#define SCONTROL_SPM_GO_ACTIVE 0x00004000
149
150#define SCONTROL_IPM_MASK 0x00000f00
151#define SCONTROL_IPM_NO_RESTRICT 0x00000000
152#define SCONTROL_IPM_PARTIAL 0x00000100
153#define SCONTROL_IPM_SLUMBER 0x00000200
154#define SCONTROL_IPM_PART_SLUM 0x00000300
155
156#define SCONTROL_SPD_MASK 0x000000f0
157#define SCONTROL_SPD_NO_RESTRICT 0x00000000
158#define SCONTROL_SPD_GEN1 0x00000010
159#define SCONTROL_SPD_GEN2 0x00000020
160
161#define SCONTROL_DET_MASK 0x0000000f
162#define SCONTROL_DET_HRESET 0x00000001
163#define SCONTROL_DET_DISABLE 0x00000004
164
165/* TransCfg register
166*/
167#define TRANSCFG_DFIS_SIZE_SHIFT 16
168#define TRANSCFG_RX_WATER_MARK_MASK 0x0000001f
169
170/* PhyCtrlCfg register
171*/
172#define PHYCTRLCFG_FPRFTI_MASK 0x00000018
173#define PHYCTRLCFG_LOOPBACK_MASK 0x0000000e
174
175/*
176* Command Header Entry
177*/
178typedef struct cmd_hdr_entry {
179 u32 cda; /* Command Descriptor Address, 4 bytes aligned */
180 u32 prde_fis_len; /* Number of PRD entries and FIS length */
181 u32 ttl; /* Total transfer length */
182 u32 attribute; /* the attribute of command */
183} __attribute__ ((packed)) cmd_hdr_entry_t;
184
185#define SATA_HC_CMD_HDR_ENTRY_SIZE sizeof(struct cmd_hdr_entry)
186
187/* cda
188*/
189#define CMD_HDR_CDA_ALIGN 4
190
191/* prde_fis_len
192*/
193#define CMD_HDR_PRD_ENTRY_SHIFT 16
194#define CMD_HDR_PRD_ENTRY_MASK 0x003f0000
195#define CMD_HDR_FIS_LEN_SHIFT 2
196
197/* attribute
198*/
199#define CMD_HDR_ATTR_RES 0x00000800 /* Reserved bit, should be 1 */
200#define CMD_HDR_ATTR_VBIST 0x00000400 /* Vendor BIST */
201#define CMD_HDR_ATTR_SNOOP 0x00000200 /* Snoop enable for all descriptor */
202#define CMD_HDR_ATTR_FPDMA 0x00000100 /* FPDMA queued command */
203#define CMD_HDR_ATTR_RESET 0x00000080 /* Reset - a SRST or device reset */
204#define CMD_HDR_ATTR_BIST 0x00000040 /* BIST - require the host to enter BIST mode */
205#define CMD_HDR_ATTR_ATAPI 0x00000020 /* ATAPI command */
206#define CMD_HDR_ATTR_TAG 0x0000001f /* TAG mask */
207
208/* command type
209*/
210enum cmd_type {
211 CMD_VENDOR_BIST,
212 CMD_BIST,
213 CMD_RESET, /* SRST or device reset */
214 CMD_ATAPI,
215 CMD_NCQ,
216 CMD_ATA, /* None of all above */
217};
218
219/*
220* Command Header Table
221*/
222typedef struct cmd_hdr_tbl {
223 cmd_hdr_entry_t cmd_slot[SATA_HC_MAX_CMD];
224} __attribute__ ((packed)) cmd_hdr_tbl_t;
225
226#define SATA_HC_CMD_HDR_TBL_SIZE sizeof(struct cmd_hdr_tbl)
227#define SATA_HC_CMD_HDR_TBL_ALIGN 4
228
229/*
230* PRD entry - Physical Region Descriptor entry
231*/
232typedef struct prd_entry {
233 u32 dba; /* Data base address, 4 bytes aligned */
234 u32 res1;
235 u32 res2;
236 u32 ext_c_ddc; /* Indirect PRD flags, snoop and data word count */
237} __attribute__ ((packed)) prd_entry_t;
238
239#define SATA_HC_CMD_DESC_PRD_SIZE sizeof(struct prd_entry)
240
241/* dba
242*/
243#define PRD_ENTRY_DBA_ALIGN 4
244
245/* ext_c_ddc
246*/
Dave Liucd3abcf2010-04-12 14:23:35 +0800247#define PRD_ENTRY_EXT 0x80000000 /* extension flag */
248#ifdef CONFIG_FSL_SATA_V2
249#define PRD_ENTRY_DATA_SNOOP 0x10000000 /* Data snoop enable */
250#else
251#define PRD_ENTRY_DATA_SNOOP 0x00400000 /* Data snoop enable */
252#endif
Dave Liufd0b1fe2008-03-26 22:55:32 +0800253#define PRD_ENTRY_LEN_MASK 0x003fffff /* Data word count */
254
255#define PRD_ENTRY_MAX_XFER_SZ (PRD_ENTRY_LEN_MASK + 1)
256
257/*
258 * This SATA host controller supports a max of 16 direct PRD entries, but if use
259 * chained indirect PRD entries, then the contollers supports upto a max of 63
260 * entries including direct and indirect PRD entries.
261 * The PRDT is an array of 63 PRD entries contigiously, but the PRD entries#15
262 * will be setup as an indirect descriptor, pointing to it's next (contigious)
263 * PRD entries#16.
264 */
265#define SATA_HC_MAX_PRD 63 /* Max PRD entry numbers per command */
266#define SATA_HC_MAX_PRD_DIRECT 16 /* Direct PRDT entries */
267#define SATA_HC_MAX_PRD_USABLE (SATA_HC_MAX_PRD - 1)
268#define SATA_HC_MAX_XFER_LEN 0x4000000
269
270/*
271* PRDT - Physical Region Descriptor Table
272*/
273typedef struct prdt {
274 prd_entry_t prdt[SATA_HC_MAX_PRD];
275} __attribute__ ((packed)) prdt_t;
276
277/*
278* Command Descriptor
279*/
280#define SATA_HC_CMD_DESC_CFIS_SIZE 32 /* bytes */
281#define SATA_HC_CMD_DESC_SFIS_SIZE 32 /* bytes */
282#define SATA_HC_CMD_DESC_ACMD_SIZE 16 /* bytes */
283#define SATA_HC_CMD_DESC_RES 16 /* bytes */
284
285typedef struct cmd_desc {
286 u8 cfis[SATA_HC_CMD_DESC_CFIS_SIZE];
287 u8 sfis[SATA_HC_CMD_DESC_SFIS_SIZE];
288 u8 acmd[SATA_HC_CMD_DESC_ACMD_SIZE];
289 u8 res[SATA_HC_CMD_DESC_RES];
290 prd_entry_t prdt[SATA_HC_MAX_PRD];
291} __attribute__ ((packed)) cmd_desc_t;
292
293#define SATA_HC_CMD_DESC_SIZE sizeof(struct cmd_desc)
294#define SATA_HC_CMD_DESC_ALIGN 4
295
296/*
Dave Liufd0b1fe2008-03-26 22:55:32 +0800297 * SATA device driver info
298 */
299typedef struct fsl_sata_info {
300 u32 sata_reg_base;
301 u32 flags;
302} fsl_sata_info_t;
303
304#define FLAGS_DMA 0x00000000
305#define FLAGS_FPDMA 0x00000001
306
307/*
308 * SATA device driver struct
309 */
310typedef struct fsl_sata {
311 char name[12];
312 fsl_sata_reg_t *reg_base; /* the base address of controller register */
313 void *cmd_hdr_tbl_offset; /* alloc address of command header table */
314 cmd_hdr_tbl_t *cmd_hdr; /* aligned address of command header table */
315 void *cmd_desc_offset; /* alloc address of command descriptor */
316 cmd_desc_t *cmd_desc; /* aligned address of command descriptor */
317 int link; /* PHY link status */
318 /* device attribute */
319 int ata_device_type; /* device type */
320 int lba48;
321 int queue_depth; /* Max NCQ queue depth */
322 u16 pio;
323 u16 mwdma;
324 u16 udma;
325 int wcache;
326 int flush;
327 int flush_ext;
328} fsl_sata_t;
329
330#define READ_CMD 0
331#define WRITE_CMD 1
332
333#endif /* __FSL_SATA_H__ */