blob: b8cce74e3ebc1931d73516645c2fa6fdf1541eb8 [file] [log] [blame]
wdenk7ebf7442002-11-02 23:17:16 +00001#
Wolfgang Denkeca3aeb2013-06-21 10:22:36 +02002# (C) Copyright 2000-2013
wdenk7ebf7442002-11-02 23:17:16 +00003# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4#
Wolfgang Denkeca3aeb2013-06-21 10:22:36 +02005# SPDX-License-Identifier: GPL-2.0+
wdenk7ebf7442002-11-02 23:17:16 +00006#
7
Tom Rinid19ad722013-11-25 16:49:32 -05008VERSION = 2014
Tom Rini3e41c542014-05-12 08:54:13 -04009PATCHLEVEL = 07
Wolfgang Denk211e4752012-07-10 09:21:12 +020010SUBLEVEL =
Tom Rinia176ff02014-07-02 13:36:19 -040011EXTRAVERSION = -rc4
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +090012NAME =
Wolfgang Denkae6d1052008-01-13 00:59:21 +010013
Masahiro Yamada6825a952014-02-04 17:24:28 +090014# *DOCUMENTATION*
15# To see a list of typical targets execute "make help"
16# More info can be located in ./README
17# Comments in this file are targeted only to the developer, do not
18# expect to learn how to build the kernel reading this file.
19
20# Do not:
21# o use make's built-in rules and variables
22# (this increases performance and avoids hard-to-debug behaviour);
23# o print "Entering directory ...";
24MAKEFLAGS += -rR --no-print-directory
25
26# Avoid funny character set dependencies
27unexport LC_ALL
28LC_COLLATE=C
29LC_NUMERIC=C
30export LC_COLLATE LC_NUMERIC
31
32# We are using a recursive build, so we need to do a little thinking
33# to get the ordering right.
34#
35# Most importantly: sub-Makefiles should only ever modify files in
36# their own directory. If in some directory we have a dependency on
37# a file in another dir (which doesn't happen often, but it's often
38# unavoidable when linking the built-in.o targets which finally
39# turn into vmlinux), we will call a sub make in that other dir, and
40# after that we are sure that everything which is in that other dir
41# is now up to date.
42#
43# The only cases where we need to modify files which have global
44# effects are thus separated out and done before the recursive
45# descending is started. They are now explicitly listed as the
46# prepare rule.
47
48# To put more focus on warnings, be less verbose as default
49# Use 'make V=1' to see the full commands
50
51ifeq ("$(origin V)", "command line")
52 KBUILD_VERBOSE = $(V)
wdenk7ebf7442002-11-02 23:17:16 +000053endif
Masahiro Yamada6825a952014-02-04 17:24:28 +090054ifndef KBUILD_VERBOSE
55 KBUILD_VERBOSE = 0
56endif
57
58# Call a source code checker (by default, "sparse") as part of the
59# C compilation.
60#
61# Use 'make C=1' to enable checking of only re-compiled files.
62# Use 'make C=2' to enable checking of *all* source files, regardless
63# of whether they are re-compiled or not.
64#
65# See the file "Documentation/sparse.txt" for more details, including
66# where to get the "sparse" utility.
67
68ifeq ("$(origin C)", "command line")
69 KBUILD_CHECKSRC = $(C)
70endif
71ifndef KBUILD_CHECKSRC
72 KBUILD_CHECKSRC = 0
73endif
74
75# Use make M=dir to specify directory of external module to build
76# Old syntax make ... SUBDIRS=$PWD is still supported
77# Setting the environment variable KBUILD_EXTMOD take precedence
78ifdef SUBDIRS
79 KBUILD_EXTMOD ?= $(SUBDIRS)
80endif
81
82ifeq ("$(origin M)", "command line")
83 KBUILD_EXTMOD := $(M)
84endif
85
Masahiro Yamada9e414032014-02-04 17:24:24 +090086# kbuild supports saving output files in a separate directory.
87# To locate output files in a separate directory two syntaxes are supported.
88# In both cases the working directory must be the root of the kernel src.
89# 1) O=
90# Use "make O=dir/to/store/output/files/"
Marian Balakowiczf9328632006-09-01 19:49:50 +020091#
Masahiro Yamada9e414032014-02-04 17:24:24 +090092# 2) Set KBUILD_OUTPUT
93# Set the environment variable KBUILD_OUTPUT to point to the directory
94# where the output files shall be placed.
95# export KBUILD_OUTPUT=dir/to/store/output/files/
96# make
Stefan Roese887e2ec2006-09-07 11:51:23 +020097#
Masahiro Yamada9e414032014-02-04 17:24:24 +090098# The O= assignment takes precedence over the KBUILD_OUTPUT environment
99# variable.
wdenk7ebf7442002-11-02 23:17:16 +0000100
Masahiro Yamada9e414032014-02-04 17:24:24 +0900101
102# KBUILD_SRC is set on invocation of make in OBJ directory
103# KBUILD_SRC is not intended to be used by the regular user (for now)
104ifeq ($(KBUILD_SRC),)
105
106# OK, Make called in directory where kernel src resides
107# Do we want to locate output files in a separate directory?
Marian Balakowiczf9328632006-09-01 19:49:50 +0200108ifeq ("$(origin O)", "command line")
Masahiro Yamada9e414032014-02-04 17:24:24 +0900109 KBUILD_OUTPUT := $(O)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200110endif
wdenk7ebf7442002-11-02 23:17:16 +0000111
Masahiro Yamada9e414032014-02-04 17:24:24 +0900112ifeq ("$(origin W)", "command line")
113 export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
114endif
115
116# That's our default target when none is given on the command line
117PHONY := _all
118_all:
119
120# Cancel implicit rules on top Makefile
121$(CURDIR)/Makefile Makefile: ;
122
123ifneq ($(KBUILD_OUTPUT),)
124# Invoke a second make in the output directory, passing relevant variables
125# check that the output directory actually exists
126saved-output := $(KBUILD_OUTPUT)
Masahiro Yamada5a449d72014-03-24 13:55:27 +0900127KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
128 && /bin/pwd)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900129$(if $(KBUILD_OUTPUT),, \
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900130 $(error failed to create output directory "$(saved-output)"))
Masahiro Yamada9e414032014-02-04 17:24:24 +0900131
132PHONY += $(MAKECMDGOALS) sub-make
133
134$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
135 @:
136
137sub-make: FORCE
138 $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
139 KBUILD_SRC=$(CURDIR) \
140 KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
141 $(filter-out _all sub-make,$(MAKECMDGOALS))
142
143# Leave processing to above invocation of make
144skip-makefile := 1
145endif # ifneq ($(KBUILD_OUTPUT),)
146endif # ifeq ($(KBUILD_SRC),)
147
148# We process the rest of the Makefile if this is the final invocation of make
149ifeq ($(skip-makefile),)
150
Masahiro Yamada6825a952014-02-04 17:24:28 +0900151# If building an external module we do not care about the all: rule
152# but instead _all depend on modules
Masahiro Yamada9e414032014-02-04 17:24:24 +0900153PHONY += all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900154ifeq ($(KBUILD_EXTMOD),)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900155_all: all
Masahiro Yamada6825a952014-02-04 17:24:28 +0900156else
157_all: modules
158endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900159
160srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
161objtree := $(CURDIR)
162src := $(srctree)
163obj := $(objtree)
164
165VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
166
167export srctree objtree VPATH
168
Masahiro Yamada01286322014-03-11 11:05:20 +0900169MKCONFIG := $(srctree)/mkconfig
Marian Balakowiczf9328632006-09-01 19:49:50 +0200170export MKCONFIG
171
Wolfgang Denk5013c092008-03-02 22:45:33 +0100172# Make sure CDPATH settings don't interfere
173unexport CDPATH
174
Marian Balakowiczf9328632006-09-01 19:49:50 +0200175#########################################################################
176
wdenk7ebf7442002-11-02 23:17:16 +0000177HOSTARCH := $(shell uname -m | \
178 sed -e s/i.86/x86/ \
179 -e s/sun4u/sparc64/ \
180 -e s/arm.*/arm/ \
181 -e s/sa110/arm/ \
182 -e s/ppc64/powerpc/ \
183 -e s/ppc/powerpc/ \
184 -e s/macppc/powerpc/\
185 -e s/sh.*/sh/)
186
187HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
188 sed -e 's/\(cygwin\).*/cygwin/')
189
190export HOSTARCH HOSTOS
191
192# Deal with colliding definitions from tcsh etc.
193VENDOR=
194
195#########################################################################
Marian Balakowiczf9328632006-09-01 19:49:50 +0200196
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400197# set default to nothing for native builds
Wolfgang Denka5284ef2007-03-06 18:01:47 +0100198ifeq ($(HOSTARCH),$(ARCH))
Mike Frysinger1ea6bcd2009-06-14 23:33:14 -0400199CROSS_COMPILE ?=
wdenk7ebf7442002-11-02 23:17:16 +0000200endif
wdenk7ebf7442002-11-02 23:17:16 +0000201
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900202# SHELL used by kbuild
203CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
204 else if [ -x /bin/bash ]; then echo /bin/bash; \
205 else echo sh; fi ; fi)
206
207HOSTCC = gcc
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900208HOSTCXX = g++
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900209HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900210HOSTCXXFLAGS = -O2
211
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900212ifeq ($(HOSTOS),cygwin)
213HOSTCFLAGS += -ansi
214endif
215
216# Mac OS X / Darwin's C preprocessor is Apple specific. It
217# generates numerous errors and warnings. We want to bypass it
218# and use GNU C's cpp. To do this we pass the -traditional-cpp
219# option to the compiler. Note that the -traditional-cpp flag
220# DOES NOT have the same semantics as GNU C's flag, all it does
221# is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
222#
223# Apple's linker is similar, thanks to the new 2 stage linking
224# multiple symbol definitions are treated as errors, hence the
225# -multiply_defined suppress option to turn off this error.
226#
227ifeq ($(HOSTOS),darwin)
228# get major and minor product version (e.g. '10' and '6' for Snow Leopard)
229DARWIN_MAJOR_VERSION = $(shell sw_vers -productVersion | cut -f 1 -d '.')
230DARWIN_MINOR_VERSION = $(shell sw_vers -productVersion | cut -f 2 -d '.')
231
232os_x_before = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
233 $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
234
235# Snow Leopards build environment has no longer restrictions as described above
236HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
237HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
238HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
239endif
240
Masahiro Yamada6825a952014-02-04 17:24:28 +0900241# Decide whether to build built-in, modular, or both.
242# Normally, just do built-in.
243
244KBUILD_MODULES :=
245KBUILD_BUILTIN := 1
246
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900247# If we have only "make modules", don't compile built-in objects.
248# When we're building modules with modversions, we need to consider
249# the built-in objects during the descend as well, in order to
250# make sure the checksums are up to date before we record them.
Masahiro Yamada6825a952014-02-04 17:24:28 +0900251
252ifeq ($(MAKECMDGOALS),modules)
253 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
254endif
255
Masahiro Yamada45f0ad92014-06-16 18:56:38 +0900256# If we have "make <whatever> modules", compile modules
257# in addition to whatever we do anyway.
258# Just "make" or "make all" shall build modules as well
Masahiro Yamada6825a952014-02-04 17:24:28 +0900259
260# U-Boot does not need modules
261#ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
262# KBUILD_MODULES := 1
263#endif
264
265#ifeq ($(MAKECMDGOALS),)
266# KBUILD_MODULES := 1
267#endif
268
269export KBUILD_MODULES KBUILD_BUILTIN
270export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
271
272# Beautify output
273# ---------------------------------------------------------------------------
274#
275# Normally, we echo the whole command before executing it. By making
276# that echo $($(quiet)$(cmd)), we now have the possibility to set
277# $(quiet) to choose other forms of output instead, e.g.
278#
279# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
280# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
281#
282# If $(quiet) is empty, the whole command will be printed.
Michal Simek69c0d322014-04-24 15:24:28 +0200283# If it is set to "quiet_", only the short version will be printed.
Masahiro Yamada6825a952014-02-04 17:24:28 +0900284# If it is set to "silent_", nothing will be printed at all, since
285# the variable $(silent_cmd_cc_o_c) doesn't exist.
286#
287# A simple variant is to prefix commands with $(Q) - that's useful
288# for commands that shall be hidden in non-verbose mode.
289#
290# $(Q)ln $@ :<
291#
292# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
293# If KBUILD_VERBOSE equals 1 then the above command is displayed.
294
295ifeq ($(KBUILD_VERBOSE),1)
296 quiet =
297 Q =
298else
299 quiet=quiet_
300 Q = @
301endif
302
303# If the user is running make -s (silent mode), suppress echoing of
304# commands
305
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900306ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
307ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
308 quiet=silent_
309endif
310else # make-3.8x
Masahiro Yamada6825a952014-02-04 17:24:28 +0900311ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
312 quiet=silent_
313endif
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900314endif
Masahiro Yamada6825a952014-02-04 17:24:28 +0900315
316export quiet Q KBUILD_VERBOSE
317
Masahiro Yamada9e414032014-02-04 17:24:24 +0900318# Look for make include files relative to root of kernel src
319MAKEFLAGS += --include-dir=$(srctree)
320
Masahiro Yamadabf4b3de2014-02-04 17:24:18 +0900321# We need some generic definitions (do not try to remake the file).
322$(srctree)/scripts/Kbuild.include: ;
323include $(srctree)/scripts/Kbuild.include
324
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900325# Make variables (CC, etc...)
326
327AS = $(CROSS_COMPILE)as
328# Always use GNU ld
329ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
330LD = $(CROSS_COMPILE)ld.bfd
331else
332LD = $(CROSS_COMPILE)ld
333endif
334CC = $(CROSS_COMPILE)gcc
335CPP = $(CC) -E
336AR = $(CROSS_COMPILE)ar
337NM = $(CROSS_COMPILE)nm
338LDR = $(CROSS_COMPILE)ldr
339STRIP = $(CROSS_COMPILE)strip
340OBJCOPY = $(CROSS_COMPILE)objcopy
341OBJDUMP = $(CROSS_COMPILE)objdump
342AWK = awk
Masahiro Yamadaf77d7092014-05-12 11:45:55 +0900343PERL = perl
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900344DTC = dtc
345CHECK = sparse
346
347CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
348 -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
349
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900350KBUILD_CPPFLAGS := -D__KERNEL__
351
352KBUILD_CFLAGS := -Wall -Wstrict-prototypes \
353 -Wno-format-security \
354 -fno-builtin -ffreestanding
355KBUILD_AFLAGS := -D__ASSEMBLY__
356
Masahiro Yamada74241452014-02-24 11:12:09 +0900357# Read UBOOTRELEASE from include/config/uboot.release (if it exists)
358UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
359UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
Masahiro Yamada5f30f3b2014-02-04 17:24:30 +0900360
Masahiro Yamada74241452014-02-24 11:12:09 +0900361export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900362export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900363export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
364export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
Masahiro Yamadaf77d7092014-05-12 11:45:55 +0900365export MAKE AWK PERL
Masahiro Yamada15c939f2014-06-06 10:15:27 +0900366export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS
Masahiro Yamadaf6322eb2014-02-04 17:24:15 +0900367
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900368export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900369export KBUILD_CFLAGS KBUILD_AFLAGS
370
Masahiro Yamada6825a952014-02-04 17:24:28 +0900371# When compiling out-of-tree modules, put MODVERDIR in the module
372# tree rather than in the kernel tree. The kernel tree might
373# even be read-only.
374export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
375
376# Files to ignore in find ... statements
377
Masahiro Yamada598e2d32014-04-15 13:29:00 +0900378export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
379 -name CVS -o -name .pc -o -name .hg -o -name .git \) \
380 -prune -o
Masahiro Yamada6825a952014-02-04 17:24:28 +0900381export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
382 --exclude CVS --exclude .pc --exclude .hg --exclude .git
383
384# ===========================================================================
385# Rules shared between *config targets and build targets
386
387# Basic helpers built in scripts/
388PHONY += scripts_basic
389scripts_basic:
390 $(Q)$(MAKE) $(build)=scripts/basic
391 $(Q)rm -f .tmp_quiet_recordmcount
392
393# To avoid any implicit rule to kick in, define an empty command.
394scripts/basic/%: scripts_basic ;
395
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900396PHONY += outputmakefile
397# outputmakefile generates a Makefile in the output directory, if using a
398# separate output directory. This allows convenient use of make in the
399# output directory.
400outputmakefile:
401ifneq ($(KBUILD_SRC),)
402 $(Q)ln -fsn $(srctree) source
403 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
404 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
405endif
406
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900407# To make sure we do not include .config for any of the *config targets
408# catch them early, and hand them over to scripts/kconfig/Makefile
409# It is allowed to specify more targets when calling make, including
410# mixing *config targets and build targets.
411# For example 'make oldconfig all'.
412# Detect when mixed targets is specified, and make a second invocation
413# of make so .config is not included in this case either (for *config).
Masahiro Yamada6825a952014-02-04 17:24:28 +0900414
Masahiro Yamada74241452014-02-24 11:12:09 +0900415version_h := include/generated/version_autogenerated.h
416timestamp_h := include/generated/timestamp_autogenerated.h
417
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900418no-dot-config-targets := clean clobber mrproper distclean \
Masahiro Yamada27651182014-02-21 15:45:11 +0900419 help %docs check% coccicheck \
Masahiro Yamada4642e002014-03-31 17:33:51 +0900420 ubootversion backup tools-only
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900421
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900422config-targets := 0
423mixed-targets := 0
424dot-config := 1
425
426ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
427 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
428 dot-config := 0
429 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900430endif
431
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900432ifeq ($(KBUILD_EXTMOD),)
433 ifneq ($(filter config %config,$(MAKECMDGOALS)),)
434 config-targets := 1
435 ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
436 mixed-targets := 1
437 endif
438 endif
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900439endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900440
441ifeq ($(mixed-targets),1)
442# ===========================================================================
443# We're called with mixed targets (*config and build targets).
444# Handle them one by one.
445
Masahiro Yamada53bca5a2014-02-04 17:24:41 +0900446PHONY += $(MAKECMDGOALS) build-one-by-one
447
448$(MAKECMDGOALS): build-one-by-one
449 @:
450
451build-one-by-one:
452 $(Q)set -e; \
453 for i in $(MAKECMDGOALS); do \
454 $(MAKE) -f $(srctree)/Makefile $$i; \
455 done
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900456
457else
458ifeq ($(config-targets),1)
459# ===========================================================================
460# *config targets only - make sure prerequisites are updated, and descend
461# in scripts/kconfig to make the *config target
462
463# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
464# KBUILD_DEFCONFIG may point out an alternative default configuration
465# used for 'make defconfig'
466
Masahiro Yamada3341bfe2014-02-04 17:24:42 +0900467%_config:: outputmakefile
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900468 @$(MKCONFIG) -A $(@:_config=)
469
470else
471# ===========================================================================
472# Build targets only - this includes vmlinux, arch specific targets, clean
473# targets and others. In general all targets except *config targets.
474
475# load ARCH, BOARD, and CPU configuration
476-include include/config.mk
477
478ifeq ($(dot-config),1)
479# Read in config
480-include include/autoconf.mk
481-include include/autoconf.mk.dep
Masahiro Yamada2b3c9d32014-02-04 17:24:19 +0900482
Wolfgang Denk92b197f2006-03-12 01:37:50 +0100483# load other configuration
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900484include $(srctree)/config.mk
Wolfgang Denk92b197f2006-03-12 01:37:50 +0100485
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900486ifeq ($(wildcard include/config.mk),)
487$(error "System not configured - see README")
Masahiro Yamadaced07152014-02-04 17:24:21 +0900488endif
Simon Glassfada9e22013-04-20 08:42:36 +0000489
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000490# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
491# that (or fail if absent). Otherwise, search for a linker script in a
492# standard location.
493
494ifndef LDSCRIPT
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900495 #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000496 ifdef CONFIG_SYS_LDSCRIPT
497 # need to strip off double quotes
Masahiro Yamada4a377552014-02-25 19:26:48 +0900498 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000499 endif
500endif
501
Simon Glassee601972011-11-21 10:49:37 +0000502# If there is no specified link script, we look in a number of places for it
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000503ifndef LDSCRIPT
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000504 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900505 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000506 endif
507 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900508 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000509 endif
510 ifeq ($(wildcard $(LDSCRIPT)),)
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900511 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
Simon Glassee601972011-11-21 10:49:37 +0000512 endif
Ilya Yanokd51dfff2011-06-20 12:45:37 +0000513endif
514
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900515else
516
517
518endif # $(dot-config)
519
520KBUILD_CFLAGS += -Os #-fomit-frame-pointer
521
522ifdef BUILD_TAG
523KBUILD_CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"'
524endif
525
526KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
527
528KBUILD_CFLAGS += -g
529# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
530# option to the assembler.
531KBUILD_AFLAGS += -g
532
533# Report stack usage if supported
Masahiro Yamada5b1f1f42013-12-11 20:11:34 +0900534ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
535 KBUILD_CFLAGS += -fstack-usage
536endif
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900537
538KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
539
540# turn jbsr into jsr for m68k
541ifeq ($(ARCH),m68k)
542ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
543KBUILD_AFLAGS += -Wa,-gstabs,-S
544endif
545endif
546
Masahiro Yamada65bb6d82014-04-18 19:09:51 +0900547# Prohibit date/time macros, which would make the build non-deterministic
548KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
549
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900550ifneq ($(CONFIG_SYS_TEXT_BASE),)
551KBUILD_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
552endif
553
554export CONFIG_SYS_TEXT_BASE
555
Masahiro Yamada0e6256d2014-04-15 14:47:40 +0900556# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
557KBUILD_CPPFLAGS += $(KCPPFLAGS)
558KBUILD_AFLAGS += $(KAFLAGS)
559KBUILD_CFLAGS += $(KCFLAGS)
560
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900561# Use UBOOTINCLUDE when you must reference the include/ directory.
562# Needed to be compatible with the O= option
Masahiro Yamadaf5c66bd2014-03-11 11:05:18 +0900563UBOOTINCLUDE := \
564 -Iinclude \
565 $(if $(KBUILD_SRC), -I$(srctree)/include) \
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900566 -I$(srctree)/arch/$(ARCH)/include
567
568NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
569CHECKFLAGS += $(NOSTDINC_FLAGS)
570
571# FIX ME
Masahiro Yamada026f9cf2014-03-05 16:59:40 +0900572cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
573 $(NOSTDINC_FLAGS)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900574c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
575
wdenk7ebf7442002-11-02 23:17:16 +0000576#########################################################################
577# U-Boot objects....order is important (i.e. start must be first)
578
Masahiro Yamadae8a8b822013-11-28 12:09:59 +0900579head-y := $(CPUDIR)/start.o
580head-$(CONFIG_4xx) += arch/powerpc/cpu/ppc4xx/resetvec.o
581head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o
wdenk7ebf7442002-11-02 23:17:16 +0000582
Masahiro Yamada9e414032014-02-04 17:24:24 +0900583HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
Marian Balakowiczf9328632006-09-01 19:49:50 +0200584
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900585libs-y += lib/
586libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
587libs-y += $(CPUDIR)/
wdenk1d9f4102004-10-09 22:21:29 +0000588ifdef SOC
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900589libs-y += $(CPUDIR)/$(SOC)/
wdenk1d9f4102004-10-09 22:21:29 +0000590endif
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900591libs-$(CONFIG_OF_EMBED) += dts/
592libs-y += arch/$(ARCH)/lib/
593libs-y += fs/
594libs-y += net/
595libs-y += disk/
596libs-y += drivers/
Simon Glass6494d702014-02-26 15:59:18 -0700597libs-$(CONFIG_DM) += drivers/core/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900598libs-y += drivers/dma/
599libs-y += drivers/gpio/
600libs-y += drivers/i2c/
601libs-y += drivers/input/
602libs-y += drivers/mmc/
603libs-y += drivers/mtd/
604libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
605libs-y += drivers/mtd/onenand/
606libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
607libs-y += drivers/mtd/spi/
608libs-y += drivers/net/
609libs-y += drivers/net/phy/
610libs-y += drivers/pci/
611libs-y += drivers/power/ \
Masahiro Yamadae2906a52013-11-11 14:36:00 +0900612 drivers/power/fuel_gauge/ \
613 drivers/power/mfd/ \
614 drivers/power/pmic/ \
615 drivers/power/battery/
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900616libs-y += drivers/spi/
617libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
618libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
619libs-y += drivers/serial/
620libs-y += drivers/usb/eth/
621libs-y += drivers/usb/gadget/
622libs-y += drivers/usb/host/
623libs-y += drivers/usb/musb/
624libs-y += drivers/usb/musb-new/
625libs-y += drivers/usb/phy/
626libs-y += drivers/usb/ulpi/
627libs-y += common/
628libs-y += lib/libfdt/
629libs-$(CONFIG_API) += api/
630libs-$(CONFIG_HAS_POST) += post/
631libs-y += test/
Simon Glass2e7d35d2014-02-26 15:59:21 -0700632libs-y += test/dm/
Simon Glass39f76112014-02-26 15:59:23 -0700633libs-$(CONFIG_DM_DEMO) += drivers/demo/
Marian Balakowiczf9328632006-09-01 19:49:50 +0200634
Alison Wang24e8bee2013-05-27 22:55:42 +0000635ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900636libs-y += arch/$(ARCH)/imx-common/
Jason Liu18936ee2011-11-25 00:18:01 +0000637endif
638
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900639libs-$(CONFIG_ARM) += arch/arm/cpu/
640libs-$(CONFIG_PPC) += arch/powerpc/cpu/
Minkyu Kang852bd072010-08-19 13:48:11 +0900641
Masahiro Yamada33a02da2014-03-03 19:03:17 +0900642libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
Masahiro Yamada08e39a82013-11-11 14:35:55 +0900643
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900644libs-y := $(sort $(libs-y))
645
646u-boot-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
647
648u-boot-alldirs := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
649
650libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
651
652u-boot-init := $(head-y)
653u-boot-main := $(libs-y)
654
wdenka8c7c702003-12-06 19:49:23 +0000655
wdenk4f7cb082003-09-11 23:06:34 +0000656# Add GCC lib
Masahiro Yamadacd2e46c2014-03-05 16:59:38 +0900657ifdef CONFIG_USE_PRIVATE_LIBGCC
658ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
Masahiro Yamadaa86cf892014-02-27 22:40:34 +0900659PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200660else
Masahiro Yamadacd2e46c2014-03-05 16:59:38 +0900661PLATFORM_LIBGCC = -L $(CONFIG_USE_PRIVATE_LIBGCC) -lgcc
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200662endif
663else
Masahiro Yamada6825a952014-02-04 17:24:28 +0900664PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
Wolfgang Denk52b1bf22009-07-23 13:15:59 +0200665endif
666PLATFORM_LIBS += $(PLATFORM_LIBGCC)
667export PLATFORM_LIBS
Alexey Brodkine75e73d2014-05-16 12:54:17 +0400668export PLATFORM_LIBGCC
wdenk3d3befa2004-03-14 15:06:13 +0000669
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400670# Special flags for CPP when processing the linker script.
671# Pass the version down so we can handle backwards compatibility
672# on the fly.
673LDPPFLAGS += \
Masahiro Yamada4379ac62014-03-11 11:05:19 +0900674 -include $(srctree)/include/u-boot/u-boot.lds.h \
Simon Glass7e6403a2011-11-21 10:49:40 +0000675 -DCPUDIR=$(CPUDIR) \
Mike Frysinger6ac9f472009-08-23 02:47:59 -0400676 $(shell $(LD) --version | \
677 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
678
wdenk7ebf7442002-11-02 23:17:16 +0000679#########################################################################
wdenkbdccc4f2003-08-05 17:43:17 +0000680#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +0000681
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400682ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
683BOARD_SIZE_CHECK = \
684 @actual=`wc -c $@ | awk '{print $$1}'`; \
Joe Hershbergerd060e6f2012-11-08 10:19:09 +0000685 limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400686 if test $$actual -gt $$limit; then \
Joe Hershbergerd060e6f2012-11-08 10:19:09 +0000687 echo "$@ exceeds file size limit:" >&2 ; \
688 echo " limit: $$limit bytes" >&2 ; \
689 echo " actual: $$actual bytes" >&2 ; \
690 echo " excess: $$((actual - limit)) bytes" >&2; \
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400691 exit 1; \
692 fi
693else
694BOARD_SIZE_CHECK =
695endif
696
Scott Wood8137af12013-12-14 11:47:32 +0800697# Statically apply RELA-style relocations (currently arm64 only)
698ifneq ($(CONFIG_STATIC_RELA),)
699# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
700DO_STATIC_RELA = \
701 start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
702 end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
Masahiro Yamada9e414032014-02-04 17:24:24 +0900703 tools/relocate-rela $(2) $(3) $$start $$end
Scott Wood8137af12013-12-14 11:47:32 +0800704else
705DO_STATIC_RELA =
706endif
707
Mike Frysinger3e883372009-06-15 00:25:19 -0400708# Always append ALL so that arch config.mk's can add custom ones
Simon Glass89742922014-06-02 22:04:47 -0600709ALL-y += u-boot.srec u-boot.bin System.map binary_size_check
Haiying Wange935a372011-01-27 09:44:59 -0500710
Masahiro Yamada9e414032014-02-04 17:24:24 +0900711ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530712ifeq ($(CONFIG_SPL_FSL_PBL),y)
713ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
714else
Masahiro Yamada9e414032014-02-04 17:24:24 +0900715ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530716endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900717ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
718ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
719ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
Masahiro Yamada0d1e8aa2014-02-21 15:34:30 +0900720ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin
Masahiro Yamada2405d092014-05-15 20:37:51 +0900721ifeq ($(CONFIG_SPL_FRAMEWORK),y)
722ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.img
723endif
Simon Glass714a5622014-02-26 15:59:14 -0700724ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000725ifneq ($(CONFIG_SPL_TARGET),)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900726ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
Vadim Bendeburyb343bbb2013-03-27 14:34:18 +0000727endif
Masahiro Yamada9e414032014-02-04 17:24:24 +0900728ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
wdenk7ebf7442002-11-02 23:17:16 +0000729
Allen Martin12b7b702012-08-31 08:30:12 +0000730# enable combined SPL/u-boot/dtb rules for tegra
Tom Warren6d6c0ba2012-12-11 13:34:17 +0000731ifneq ($(CONFIG_TEGRA),)
Vidya Sagar7dcd3a22013-10-31 14:51:38 +0530732ifeq ($(CONFIG_SPL),y)
Allen Martin12b7b702012-08-31 08:30:12 +0000733ifeq ($(CONFIG_OF_SEPARATE),y)
Masahiro Yamada9e414032014-02-04 17:24:24 +0900734ALL-y += u-boot-dtb-tegra.bin
Allen Martin12b7b702012-08-31 08:30:12 +0000735else
Masahiro Yamada9e414032014-02-04 17:24:24 +0900736ALL-y += u-boot-nodtb-tegra.bin
Allen Martin12b7b702012-08-31 08:30:12 +0000737endif
738endif
Vidya Sagar7dcd3a22013-10-31 14:51:38 +0530739endif
Allen Martin12b7b702012-08-31 08:30:12 +0000740
Masahiro Yamadaad0fed42014-02-24 11:12:18 +0900741LDFLAGS_u-boot += $(LDFLAGS_FINAL)
Masahiro Yamada433b2f12014-02-04 17:24:35 +0900742ifneq ($(CONFIG_SYS_TEXT_BASE),)
743LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
744endif
Masahiro Yamada71f84ef2013-10-17 17:34:53 +0900745
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900746quiet_cmd_objcopy = OBJCOPY $@
747cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
748
Marek Vasutb97241b2014-03-14 05:00:14 +0100749quiet_cmd_mkimage = MKIMAGE $@
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900750cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
751 $(if $(KBUILD_VERBOSE:1=), >/dev/null)
752
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +0900753quiet_cmd_cat = CAT $@
754cmd_cat = cat $(filter-out $(PHONY), $^) > $@
755
Masahiro Yamada982a1192014-02-24 11:12:17 +0900756append = cat $(filter-out $< $(PHONY), $^) >> $@
757
758quiet_cmd_pad_cat = CAT $@
759cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
760
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900761all: $(ALL-y)
wdenk7ebf7442002-11-02 23:17:16 +0000762
Masahiro Yamada6ab6b2a2014-02-05 11:28:25 +0900763PHONY += dtbs
764dtbs dts/dt.dtb: checkdtc u-boot
765 $(Q)$(MAKE) $(build)=dts dtbs
Simon Glass2c0f79e2011-10-24 19:15:31 +0000766
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +0900767u-boot-dtb.bin: u-boot.bin dts/dt.dtb FORCE
768 $(call if_changed,cat)
Simon Glass2c0f79e2011-10-24 19:15:31 +0000769
Stefano Babice64348f2014-03-31 09:50:35 +0200770%.imx: %.bin
771 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
772
Masahiro Yamada0d1e8aa2014-02-21 15:34:30 +0900773quiet_cmd_copy = COPY $@
774 cmd_copy = cp $< $@
775
776u-boot.dtb: dts/dt.dtb
777 $(call cmd,copy)
778
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900779OBJCOPYFLAGS_u-boot.hex := -O ihex
wdenk6310eb92005-01-09 21:28:15 +0000780
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900781OBJCOPYFLAGS_u-boot.srec := -O srec
wdenk7ebf7442002-11-02 23:17:16 +0000782
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900783u-boot.hex u-boot.srec: u-boot FORCE
784 $(call if_changed,objcopy)
785
786OBJCOPYFLAGS_u-boot.bin := -O binary
787
Simon Glass89742922014-06-02 22:04:47 -0600788binary_size_check: u-boot.bin System.map FORCE
789 @file_size=`stat -c %s u-boot.bin` ; \
790 map_size=$(shell cat System.map | \
Simon Glass0b308f12014-06-18 00:10:15 -0600791 awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \
792 | bc); \
Simon Glass89742922014-06-02 22:04:47 -0600793 if [ "" != "$$map_size" ]; then \
794 if test $$map_size -ne $$file_size; then \
795 echo "System.map shows a binary size of $$map_size" >&2 ; \
796 echo " but u-boot.bin shows $$file_size" >&2 ; \
797 exit 1; \
798 fi \
799 fi
800
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900801u-boot.bin: u-boot FORCE
802 $(call if_changed,objcopy)
803 $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
804 $(BOARD_SIZE_CHECK)
wdenk7ebf7442002-11-02 23:17:16 +0000805
Masahiro Yamada9e414032014-02-04 17:24:24 +0900806u-boot.ldr: u-boot
Mike Frysinger76d82182009-07-21 22:17:36 -0400807 $(CREATE_LDR_ENV)
Mike Frysinger68e56322008-08-07 18:56:56 -0400808 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
Mike Frysingerf3a14d32010-10-13 22:58:23 -0400809 $(BOARD_SIZE_CHECK)
Mike Frysinger94a91e22008-02-04 19:26:57 -0500810
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900811OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
Mike Frysinger94a91e22008-02-04 19:26:57 -0500812
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +0900813OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
814
815u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
816 $(call if_changed,objcopy)
Mike Frysinger94a91e22008-02-04 19:26:57 -0500817
Stefan Roeseb40bda62012-08-16 17:54:52 +0200818#
819# U-Boot entry point, needed for booting of full-blown U-Boot
820# from the SPL U-Boot version.
821#
822ifndef CONFIG_SYS_UBOOT_START
823CONFIG_SYS_UBOOT_START := 0
824endif
825
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900826MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
827 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
828 -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
829
Masahiro Yamada4ab3fc52014-03-11 11:05:17 +0900830MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
831 -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900832
Masahiro Yamadae4536f82014-03-11 11:05:16 +0900833MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
834 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900835
Simon Glassd18926a2014-06-12 07:24:43 -0600836u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900837 $(call if_changed,mkimage)
wdenkbdccc4f2003-08-05 17:43:17 +0000838
Masahiro Yamada2405d092014-05-15 20:37:51 +0900839MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
840
841u-boot-dtb.img: u-boot-dtb.bin FORCE
842 $(call if_changed,mkimage)
843
Masahiro Yamada9e414032014-02-04 17:24:24 +0900844u-boot.sha1: u-boot.bin
845 tools/ubsha1 u-boot.bin
Heiko Schocher566a4942007-06-22 19:11:54 +0200846
Masahiro Yamada9e414032014-02-04 17:24:24 +0900847u-boot.dis: u-boot
wdenk7ebf7442002-11-02 23:17:16 +0000848 $(OBJDUMP) -d $< > $@
849
Ying Zhang3aa29de2013-08-16 15:16:15 +0800850ifdef CONFIG_TPL
Masahiro Yamada9e414032014-02-04 17:24:24 +0900851SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
Ying Zhang3aa29de2013-08-16 15:16:15 +0800852else
Masahiro Yamada9e414032014-02-04 17:24:24 +0900853SPL_PAYLOAD := u-boot.bin
Ying Zhang3aa29de2013-08-16 15:16:15 +0800854endif
Scott Wood74752ba2012-12-06 13:33:16 +0000855
Masahiro Yamada982a1192014-02-24 11:12:17 +0900856OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
857 --pad-to=$(CONFIG_SPL_PAD_TO)
858u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
859 $(call if_changed,pad_cat)
Ying Zhang3aa29de2013-08-16 15:16:15 +0800860
Masahiro Yamada982a1192014-02-24 11:12:17 +0900861OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
862 --pad-to=$(CONFIG_TPL_PAD_TO)
863tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
864 $(call if_changed,pad_cat)
Heiko Schocher7816f2c2011-07-16 00:06:42 +0000865
Masahiro Yamada630d2342014-02-24 11:12:21 +0900866SPL: spl/u-boot-spl.bin FORCE
867 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
868
869u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
Masahiro Yamada4e0c8ab2014-02-24 11:12:20 +0900870 $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
Benoît Thébaudeau7d5a5c72013-04-11 09:35:57 +0000871
Masahiro Yamada9bf215b2014-02-24 11:12:15 +0900872MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
873
874u-boot.ubl: u-boot-with-spl.bin FORCE
875 $(call if_changed,mkimage)
José Miguel Gonçalves277f00f2012-09-19 01:25:26 +0000876
Masahiro Yamada982a1192014-02-24 11:12:17 +0900877MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
878 $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
879 -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
880spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
881 $(call if_changed,mkimage)
Christian Rieschd36d8852011-12-09 09:47:39 +0000882
Christian Riesch532d5312014-05-07 10:16:28 +0200883OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
Masahiro Yamada982a1192014-02-24 11:12:17 +0900884u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
885 $(call if_changed,pad_cat)
Otavio Salvadora5453552012-08-18 07:25:25 +0000886
Marek Vasut1a9df132014-04-03 19:12:21 +0200887u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
888 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
Masahiro Yamada03c7b3f2014-02-24 11:12:13 +0900889u-boot.sb: u-boot.bin spl/u-boot-spl.bin
Masahiro Yamada07e27ce2014-03-11 11:05:11 +0900890 $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
Marek Vasut30b9b932011-11-08 23:18:19 +0000891
Stefan Roese94aebe62012-01-05 11:19:50 +0100892# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
893# Both images are created using mkimage (crc etc), so that the ROM
894# bootloader can check its integrity. Padding needs to be done to the
895# SPL image (with mkimage header) and not the binary. Otherwise the resulting image
896# which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
897# The resulting image containing both U-Boot images is called u-boot.spr
Masahiro Yamada982a1192014-02-24 11:12:17 +0900898MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
899 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
900spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
901 $(call if_changed,mkimage)
902
903OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
904 --gap-fill=0xff
905u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
906 $(call if_changed,pad_cat)
Stefan Roese94aebe62012-01-05 11:19:50 +0100907
Vitaly Andrianovef509b92014-04-04 13:16:53 -0400908MKIMAGEFLAGS_u-boot-spl.gph = -A $(ARCH) -T gpimage -C none \
909 -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n SPL
910spl/u-boot-spl.gph: spl/u-boot-spl.bin FORCE
911 $(call if_changed,mkimage)
912
913OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
914 --gap-fill=0
915u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE
916 $(call if_changed,pad_cat)
917
Ian Campbell50827a52014-05-05 11:52:30 +0100918ifneq ($(CONFIG_SUNXI),)
919OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
920 --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
921u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
922 $(call if_changed,pad_cat)
923endif
924
Tom Warren6d6c0ba2012-12-11 13:34:17 +0000925ifneq ($(CONFIG_TEGRA),)
Masahiro Yamada982a1192014-02-24 11:12:17 +0900926OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
927u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
928 $(call if_changed,pad_cat)
Stephen Warren9972db52013-05-14 08:00:53 +0000929
930ifeq ($(CONFIG_OF_SEPARATE),y)
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +0900931u-boot-dtb-tegra.bin: u-boot-nodtb-tegra.bin dts/dt.dtb FORCE
932 $(call if_changed,cat)
Stephen Warren9972db52013-05-14 08:00:53 +0000933endif
Allen Martin984df4e2012-08-31 08:30:10 +0000934endif
935
Masahiro Yamadaee0acfa2014-02-24 11:12:16 +0900936u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
937 $(call if_changed,cat)
Stefan Roesefb3d2b82012-08-24 17:36:53 +0200938
Prabhakar Kushwaha89ad7be2014-04-08 19:13:34 +0530939#Add a target to create boot binary having SPL binary in PBI format
940#concatenated with u-boot binary. It is need by PowerPC SoC having
941#internal SRAM <= 512KB.
942MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
943 -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
944
945spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
946 $(call if_changed,mkimage)
947
948OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
949 --gap-fill=0xff
950
951u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE
952 $(call if_changed,pad_cat)
953
Stefan Roeseecddccd2013-02-22 11:36:50 +0100954# PPC4xx needs the SPL at the end of the image, since the reset vector
955# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
956# and need to introduce a new build target with the full blown U-Boot
957# at the start padded up to the start of the SPL image. And then concat
958# the SPL image to the end.
Masahiro Yamada982a1192014-02-24 11:12:17 +0900959
960OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
961 --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
962u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
963 $(call if_changed,pad_cat)
Stefan Roeseecddccd2013-02-22 11:36:50 +0100964
Scott Woodf4dc7142013-12-14 11:47:33 +0800965# Create a new ELF from a raw binary file. This is useful for arm64
966# where static relocation needs to be performed on the raw binary,
967# but certain simulators only accept an ELF file (but don't do the
968# relocation).
969# FIXME refactor dts/Makefile to share target/arch detection
Masahiro Yamada9e414032014-02-04 17:24:24 +0900970u-boot.elf: u-boot.bin
Scott Woodf4dc7142013-12-14 11:47:33 +0800971 @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \
Masahiro Yamada9e414032014-02-04 17:24:24 +0900972 $< u-boot-elf.o
973 @$(LD) u-boot-elf.o -o $@ \
Scott Woodf4dc7142013-12-14 11:47:33 +0800974 --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \
975 -Ttext=$(CONFIG_SYS_TEXT_BASE)
976
Masahiro Yamadaad0fed42014-02-24 11:12:18 +0900977# Rule to link u-boot
978# May be overridden by arch/$(ARCH)/config.mk
979quiet_cmd_u-boot__ ?= LD $@
980 cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
981 -T u-boot.lds $(u-boot-init) \
982 --start-group $(u-boot-main) --end-group \
983 $(PLATFORM_LIBS) -Map u-boot.map
Simon Glass86eb49b2011-10-03 19:26:50 +0000984
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900985u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds
Masahiro Yamadaad0fed42014-02-24 11:12:18 +0900986 $(call if_changed,u-boot__)
Mike Frysingerecb1dc82009-05-20 04:35:14 -0400987ifeq ($(CONFIG_KALLSYMS),y)
Masahiro Yamadaad0fed42014-02-24 11:12:18 +0900988 smap=`$(call SYSTEM_MAP,u-boot) | \
989 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
990 $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
991 -c $(srctree)/common/system_map.c -o common/system_map.o
992 $(call cmd,u-boot__) common/system_map.o
Mike Frysingerecb1dc82009-05-20 04:35:14 -0400993endif
wdenk7ebf7442002-11-02 23:17:16 +0000994
Michal Simek69c0d322014-04-24 15:24:28 +0200995# The actual objects are generated when descending,
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900996# make sure no implicit rule kicks in
997$(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
Marian Balakowiczf9328632006-09-01 19:49:50 +0200998
Masahiro Yamada656de6b2014-02-04 17:24:37 +0900999# Handle descending into subdirectories listed in $(vmlinux-dirs)
1000# Preset locale variables to speed up the build process. Limit locale
1001# tweaks to this spot to avoid wrong language settings when running
1002# make menuconfig etc.
1003# Error messages still appears in the original language
wdenka8c7c702003-12-06 19:49:23 +00001004
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001005PHONY += $(u-boot-dirs)
Masahiro Yamada63780082014-02-24 11:12:10 +09001006$(u-boot-dirs): prepare scripts
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001007 $(Q)$(MAKE) $(build)=$@
Masahiro Yamada940db162014-02-04 17:24:10 +09001008
Masahiro Yamada74241452014-02-24 11:12:09 +09001009tools: prepare
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001010# The "tools" are needed early
1011$(filter-out tools, $(u-boot-dirs)): tools
1012# The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
1013# is "yes"), so compile examples after U-Boot is compiled.
1014examples: $(filter-out examples, $(u-boot-dirs))
1015
Masahiro Yamada74241452014-02-24 11:12:09 +09001016define filechk_uboot.release
1017 echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1018endef
1019
1020# Store (new) UBOOTRELEASE string in include/config/uboot.release
1021include/config/uboot.release: Makefile FORCE
1022 $(call filechk,uboot.release)
1023
1024
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001025# Things we need to do before we recursively start building the kernel
1026# or the modules are listed in "prepare".
1027# A multi level approach is used. prepareN is processed before prepareN-1.
1028# archprepare is used in arch Makefiles and when processed asm symlink,
1029# version.h and scripts_basic is processed / created.
1030
1031# Listed in dependency order
1032PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
1033
1034# prepare3 is used to check if we are building in a separate output directory,
1035# and if so do:
1036# 1) Check that make has not been executed in the kernel src $(srctree)
Masahiro Yamada74241452014-02-24 11:12:09 +09001037prepare3: include/config/uboot.release
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001038ifneq ($(KBUILD_SRC),)
1039 @$(kecho) ' Using $(srctree) as source for u-boot'
1040 $(Q)if [ -f $(srctree)/include/config.mk ]; then \
1041 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
1042 echo >&2 " in the '$(srctree)' directory.";\
1043 /bin/false; \
1044 fi;
1045endif
1046
1047# prepare2 creates a makefile if using a separate output directory
1048prepare2: prepare3 outputmakefile
1049
Masahiro Yamada74241452014-02-24 11:12:09 +09001050prepare1: prepare2 $(version_h) $(timestamp_h)
Masahiro Yamada331b45f2014-02-25 19:26:47 +09001051ifeq ($(__HAVE_ARCH_GENERIC_BOARD),)
1052ifeq ($(CONFIG_SYS_GENERIC_BOARD),y)
1053 @echo >&2 " Your architecture does not support generic board."
1054 @echo >&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file."
1055 @/bin/false
1056endif
1057endif
Masahiro Yamada4a377552014-02-25 19:26:48 +09001058ifeq ($(wildcard $(LDSCRIPT)),)
1059 @echo >&2 " Could not find linker script."
1060 @/bin/false
1061endif
wdenk7ebf7442002-11-02 23:17:16 +00001062
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001063archprepare: prepare1 scripts_basic
wdenka8c7c702003-12-06 19:49:23 +00001064
Masahiro Yamada6a44d802014-02-24 11:12:11 +09001065prepare0: archprepare FORCE
1066 $(Q)$(MAKE) $(build)=.
wdenk7ebf7442002-11-02 23:17:16 +00001067
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001068# All the preparing..
1069prepare: prepare0
Che-liang Chiou349e83f2011-10-17 21:04:15 +00001070
Masahiro Yamada74241452014-02-24 11:12:09 +09001071# Generate some files
1072# ---------------------------------------------------------------------------
1073
1074define filechk_version.h
1075 (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1076 echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
1077 echo \#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \
1078 echo \#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; )
1079endef
1080
1081define filechk_timestamp.h
1082 (LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
1083 LC_ALL=C date +'#define U_BOOT_TIME "%T"')
1084endef
1085
Masahiro Yamada2e6b2f62014-03-10 10:42:27 +09001086$(version_h): include/config/uboot.release FORCE
Masahiro Yamada74241452014-02-24 11:12:09 +09001087 $(call filechk,version.h)
1088
1089$(timestamp_h): $(srctree)/Makefile FORCE
1090 $(call filechk,timestamp.h)
1091
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001092#
1093# Auto-generate the autoconf.mk file (which is included by all makefiles)
1094#
1095# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
1096# the dep file is only include in this top level makefile to determine when
1097# to regenerate the autoconf.mk file.
Wolfgang Denk1aada9c2009-08-17 14:00:53 +02001098
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001099quiet_cmd_autoconf_dep = GEN $@
1100 cmd_autoconf_dep = $(CC) -x c -DDO_DEPS_ONLY -M $(c_flags) \
1101 -MQ include/autoconf.mk $(srctree)/include/common.h > $@ || rm $@
Stefan Roese887e2ec2006-09-07 11:51:23 +02001102
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001103include/autoconf.mk.dep: include/config.h include/common.h
1104 $(call cmd,autoconf_dep)
Stefan Roese887e2ec2006-09-07 11:51:23 +02001105
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001106quiet_cmd_autoconf = GEN $@
1107 cmd_autoconf = \
1108 $(CPP) $(c_flags) -DDO_DEPS_ONLY -dM $(srctree)/include/common.h > $@.tmp && \
1109 sed -n -f $(srctree)/tools/scripts/define2mk.sed $@.tmp > $@; \
1110 rm $@.tmp
Daniel Schwierzeck5df2ee22011-07-13 05:11:04 +00001111
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001112include/autoconf.mk: include/config.h
1113 $(call cmd,autoconf)
1114
Masahiro Yamada63780082014-02-24 11:12:10 +09001115# ---------------------------------------------------------------------------
1116
1117PHONY += depend dep
1118depend dep:
1119 @echo '*** Warning: make $@ is unnecessary now.'
1120
1121# ---------------------------------------------------------------------------
Masahiro Yamada04a34c92014-02-24 11:12:19 +09001122quiet_cmd_cpp_lds = LDS $@
Masahiro Yamada395e60c2014-04-09 20:10:43 +09001123cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
1124 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
Masahiro Yamada63780082014-02-24 11:12:10 +09001125
Masahiro Yamada04a34c92014-02-24 11:12:19 +09001126u-boot.lds: $(LDSCRIPT) prepare FORCE
Masahiro Yamada395e60c2014-04-09 20:10:43 +09001127 $(call if_changed_dep,cpp_lds)
Stefan Roesef2302d42008-08-06 14:05:38 +02001128
Masahiro Yamada982a1192014-02-24 11:12:17 +09001129spl/u-boot-spl.bin: spl/u-boot-spl
1130 @:
1131spl/u-boot-spl: tools prepare
Masahiro Yamadac7163082014-06-09 15:14:11 +09001132 $(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
Chander Kashyap0d3c62e2011-05-24 20:02:57 +00001133
Ian Campbell50827a52014-05-05 11:52:30 +01001134spl/sunxi-spl.bin: spl/u-boot-spl
1135 @:
1136
Masahiro Yamada63780082014-02-24 11:12:10 +09001137tpl/u-boot-tpl.bin: tools prepare
Masahiro Yamadac7163082014-06-09 15:14:11 +09001138 $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all CONFIG_TPL_BUILD=y
Ying Zhang3aa29de2013-08-16 15:16:15 +08001139
Masahiro Yamada656de6b2014-02-04 17:24:37 +09001140TAG_SUBDIRS := $(u-boot-dirs) include
Jean-Christophe PLAGNIOL-VILLARDa340c322007-11-25 18:45:47 +01001141
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00001142FIND := find
1143FINDFLAGS := -L
1144
Marian Balakowiczf9328632006-09-01 19:49:50 +02001145tags ctags:
Masahiro Yamada9e414032014-02-04 17:24:24 +09001146 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08001147 -name '*.[chS]' -print`
wdenk7ebf7442002-11-02 23:17:16 +00001148
1149etags:
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00001150 etags -a -o $(obj)etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
Li Yange5e4e702009-12-09 18:13:26 +08001151 -name '*.[chS]' -print`
Li Yangffda5862008-02-29 11:46:05 +08001152cscope:
Horst Kronstorfer857d9ea2011-07-18 01:21:18 +00001153 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
1154 cscope.files
Li Yangffda5862008-02-29 11:46:05 +08001155 cscope -b -q -k
wdenk7ebf7442002-11-02 23:17:16 +00001156
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001157SYSTEM_MAP = \
1158 $(NM) $1 | \
wdenk7ebf7442002-11-02 23:17:16 +00001159 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
Mike Frysingerecb1dc82009-05-20 04:35:14 -04001160 LC_ALL=C sort
Masahiro Yamada9e414032014-02-04 17:24:24 +09001161System.map: u-boot
Masahiro Yamadabc8bb6e2013-11-11 14:36:01 +09001162 @$(call SYSTEM_MAP,$<) > $@
wdenk7ebf7442002-11-02 23:17:16 +00001163
Stephen Warren501ebdf2013-07-24 10:09:16 -07001164checkdtc:
1165 @if test $(call dtc-version) -lt 0104; then \
1166 echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
1167 false; \
1168 fi
1169
wdenk7ebf7442002-11-02 23:17:16 +00001170#########################################################################
wdenk7ebf7442002-11-02 23:17:16 +00001171
Scott Wood54799e42013-12-14 11:47:34 +08001172# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1173# R_AARCH64_RELATIVE (64-bit).
Masahiro Yamada9e414032014-02-04 17:24:24 +09001174checkarmreloc: u-boot
Scott Wood54799e42013-12-14 11:47:34 +08001175 @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1176 grep R_A | sort -u`"; \
1177 if test "$$RELOC" != "R_ARM_RELATIVE" -a \
1178 "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1179 echo "$< contains unexpected relocations: $$RELOC"; \
1180 false; \
1181 fi
Albert ARIBAUDc37980c2013-06-11 14:17:30 +02001182
Masahiro Yamada74241452014-02-24 11:12:09 +09001183env: scripts_basic
Masahiro Yamada3f76e982014-02-04 17:24:38 +09001184 $(Q)$(MAKE) $(build)=tools/$@
Mike Frysinger0358df42010-08-15 00:03:21 -04001185
Masahiro Yamada4642e002014-03-31 17:33:51 +09001186tools-only: scripts_basic $(version_h) $(timestamp_h)
1187 $(Q)$(MAKE) $(build)=tools
1188
Masahiro Yamada1ec8b4e2014-03-03 11:06:18 +09001189tools-all: export HOST_TOOLS_ALL=y
Masahiro Yamada2887c472014-02-04 17:24:39 +09001190tools-all: env tools ;
Mike Frysinger0358df42010-08-15 00:03:21 -04001191
Masahiro Yamadadb5b3392014-03-03 11:06:19 +09001192cross_tools: export CROSS_BUILD_TOOLS=y
1193cross_tools: tools ;
1194
Wolfgang Denk4e53a252006-10-25 00:43:17 +02001195.PHONY : CHANGELOG
1196CHANGELOG:
Ben Warrenb985b5d2006-10-26 14:38:25 -04001197 git log --no-merges U-Boot-1_1_5.. | \
1198 unexpand -a | sed -e 's/\s\s*$$//' > $@
Wolfgang Denk4e53a252006-10-25 00:43:17 +02001199
Harald Welte0a823aa2008-07-09 22:30:30 +08001200include/license.h: tools/bin2header COPYING
Wolfgang Denk0e42ada2010-05-27 23:18:33 +02001201 cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
wdenk7ebf7442002-11-02 23:17:16 +00001202#########################################################################
1203
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001204###
1205# Cleaning is done on three levels.
1206# make clean Delete most generated files
1207# Leave enough to build external modules
1208# make mrproper Delete the current configuration, and all generated files
1209# make distclean Remove editor backup files, patch leftover files and the like
wdenk7ebf7442002-11-02 23:17:16 +00001210
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001211# Directories & files removed with 'make clean'
1212CLEAN_DIRS += $(MODVERDIR)
1213CLEAN_FILES += u-boot.lds include/bmp_logo.h include/bmp_logo_data.h \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001214 include/autoconf.mk* include/spl-autoconf.mk \
1215 include/tpl-autoconf.mk
Wolfgang Denka6862bc2010-05-27 23:18:36 +02001216
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001217# Directories & files removed with 'make clobber'
Masahiro Yamadac7163082014-06-09 15:14:11 +09001218CLOBBER_DIRS += spl tpl
Masahiro Yamada66948c22014-06-04 10:26:53 +09001219CLOBBER_FILES += u-boot* MLO* SPL System.map
Mike Frysinger9f4a4202009-10-01 12:11:54 -04001220
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001221# Directories & files removed with 'make mrproper'
Masahiro Yamada598e2d32014-04-15 13:29:00 +09001222MRPROPER_DIRS += include/config include/generated \
Masahiro Yamada45f0ad92014-06-16 18:56:38 +09001223 .tmp_objdiff
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001224MRPROPER_FILES += .config .config.old \
1225 tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
1226 include/config.h include/config.mk
wdenk7ebf7442002-11-02 23:17:16 +00001227
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001228# clean - Delete most, but leave enough to build external modules
1229#
1230clean: rm-dirs := $(CLEAN_DIRS)
1231clean: rm-files := $(CLEAN_FILES)
wdenk7ebf7442002-11-02 23:17:16 +00001232
Masahiro Yamada6bd04bb2014-03-28 14:55:02 +09001233clean-dirs := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $(srctree)/$f/Makefile),$f))
Andy Fleming734329f2011-11-21 13:40:43 +00001234
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001235clean-dirs := $(addprefix _clean_, $(clean-dirs) doc/DocBook)
wdenk7ebf7442002-11-02 23:17:16 +00001236
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001237PHONY += $(clean-dirs) clean archclean
1238$(clean-dirs):
1239 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1240
1241# TODO: Do not use *.cfgtmp
1242clean: $(clean-dirs)
1243 $(call cmd,rmdirs)
1244 $(call cmd,rmfiles)
1245 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1246 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1247 -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \
1248 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1249 -o -name '*.symtypes' -o -name 'modules.order' \
1250 -o -name modules.builtin -o -name '.tmp_*.o.*' \
1251 -o -name '*.gcno' \) -type f -print | xargs rm -f
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001252
1253# clobber
1254#
1255clobber: rm-dirs := $(CLOBBER_DIRS)
1256clobber: rm-files := $(CLOBBER_FILES)
1257
1258PHONY += clobber
wdenk7ebf7442002-11-02 23:17:16 +00001259
Masahiro Yamada73906432014-02-04 17:24:34 +09001260clobber: clean
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001261 $(call cmd,rmdirs)
1262 $(call cmd,rmfiles)
wdenk7ebf7442002-11-02 23:17:16 +00001263
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001264# mrproper - Delete all generated files, including .config
1265#
1266mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
1267mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1268mrproper-dirs := $(addprefix _mrproper_,scripts)
1269
1270PHONY += $(mrproper-dirs) mrproper archmrproper
1271$(mrproper-dirs):
1272 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1273
1274mrproper: clobber $(mrproper-dirs)
1275 $(call cmd,rmdirs)
1276 $(call cmd,rmfiles)
Masahiro Yamadae9c16a82014-06-24 18:15:45 +09001277 @rm -f arch/*/include/asm/arch
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001278
1279# distclean
1280#
1281PHONY += distclean
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001282
1283distclean: mrproper
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001284 @find $(srctree) $(RCS_FIND_IGNORE) \
1285 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1286 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
Masahiro Yamada598e2d32014-04-15 13:29:00 +09001287 -o -name '.*.rej' -o -name '*%' -o -name 'core' \
1288 -o -name '*.pyc' \) \
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001289 -type f -print | xargs rm -f
wdenk7ebf7442002-11-02 23:17:16 +00001290
1291backup:
Masahiro Yamada4379ac62014-03-11 11:05:19 +09001292 F=`basename $(srctree)` ; cd .. ; \
Ilya Yanokd6b93712010-06-21 18:13:21 +04001293 gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
wdenk7ebf7442002-11-02 23:17:16 +00001294
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001295help:
1296 @echo 'Cleaning targets:'
1297 @echo ' clean - Remove most generated files but keep the config and'
1298 @echo ' necessities for testing u-boot'
1299 @echo ' clobber - Remove most generated files but keep the config'
1300 @echo ' mrproper - Remove all generated files + config + various backup files'
1301 @echo ' distclean - mrproper + remove editor backup and patch files'
1302 @echo ''
1303# uncomment after adding Kconfig feature
1304# @echo 'Configuration targets:'
1305# @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1306# @echo ''
1307 @echo 'Other generic targets:'
1308 @echo ' all - Build all necessary images depending on configuration'
1309 @echo ' u-boot - Build the bare u-boot'
1310 @echo ' dir/ - Build all files in dir and below'
1311 @echo ' dir/file.[oisS] - Build specified target only'
1312 @echo ' dir/file.lst - Build specified mixed source/assembly target only'
1313 @echo ' (requires a recent binutils and recent build (System.map))'
1314 @echo ' tags/TAGS - Generate tags file for editors'
1315 @echo ' cscope - Generate cscope index'
1316 @echo ' ubootrelease - Output the release version string'
1317 @echo ' ubootversion - Output the version stored in Makefile'
1318 @echo ''
1319 @echo 'Static analysers'
1320 @echo ' checkstack - Generate a list of stack hogs'
1321 @echo ''
1322 @echo 'Documentation targets:'
1323 @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp
1324 @echo ''
1325 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1326 @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
1327 @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
1328 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
1329 @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
1330 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1331 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
1332 @echo ' 1: warnings which may be relevant and do not occur too often'
1333 @echo ' 2: warnings which occur quite often but may still be relevant'
1334 @echo ' 3: more obscure warnings, can most likely be ignored'
1335 @echo ' Multiple levels can be combined with W=12 or W=123'
1336 @echo ''
1337 @echo 'Execute "make" or "make all" to build all targets marked with [*] '
1338 @echo 'For further info see the ./README file'
1339
Masahiro Yamada8fac9c72014-02-05 10:52:50 +09001340
1341# Documentation targets
1342# ---------------------------------------------------------------------------
1343%docs: scripts_basic FORCE
1344 $(Q)$(MAKE) $(build)=scripts build_docproc
1345 $(Q)$(MAKE) $(build)=doc/DocBook $@
1346
Masahiro Yamada3341bfe2014-02-04 17:24:42 +09001347# Dummies...
1348PHONY += prepare scripts
1349prepare: ;
1350scripts: ;
Masahiro Yamada9e414032014-02-04 17:24:24 +09001351
Masahiro Yamada433b2f12014-02-04 17:24:35 +09001352endif #ifeq ($(config-targets),1)
1353endif #ifeq ($(mixed-targets),1)
1354
Masahiro Yamadaed1ca522014-02-24 11:12:23 +09001355PHONY += checkstack ubootrelease ubootversion
1356
1357checkstack:
1358 $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
1359 $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
1360
1361ubootrelease:
1362 @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1363
1364ubootversion:
1365 @echo $(UBOOTVERSION)
1366
Masahiro Yamada886d86e2014-02-24 11:12:22 +09001367# Single targets
1368# ---------------------------------------------------------------------------
1369# Single targets are compatible with:
1370# - build with mixed source and output
1371# - build with separate output dir 'make O=...'
1372# - external modules
1373#
1374# target-dir => where to store outputfile
1375# build-dir => directory in kernel source tree to use
1376
1377ifeq ($(KBUILD_EXTMOD),)
1378 build-dir = $(patsubst %/,%,$(dir $@))
1379 target-dir = $(dir $@)
1380else
1381 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1382 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1383 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1384endif
1385
1386%.s: %.c prepare scripts FORCE
1387 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1388%.i: %.c prepare scripts FORCE
1389 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1390%.o: %.c prepare scripts FORCE
1391 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1392%.lst: %.c prepare scripts FORCE
1393 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1394%.s: %.S prepare scripts FORCE
1395 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1396%.o: %.S prepare scripts FORCE
1397 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1398%.symtypes: %.c prepare scripts FORCE
1399 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1400
1401# Modules
1402/: prepare scripts FORCE
1403 $(cmd_crmodverdir)
1404 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1405 $(build)=$(build-dir)
1406%/: prepare scripts FORCE
1407 $(cmd_crmodverdir)
1408 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1409 $(build)=$(build-dir)
1410%.ko: prepare scripts FORCE
1411 $(cmd_crmodverdir)
1412 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1413 $(build)=$(build-dir) $(@:.ko=.o)
1414 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1415
Michal Simek69c0d322014-04-24 15:24:28 +02001416# FIXME Should go into a make.lib or something
Masahiro Yamada886d86e2014-02-24 11:12:22 +09001417# ===========================================================================
1418
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001419quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
1420 cmd_rmdirs = rm -rf $(rm-dirs)
1421
1422quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
1423 cmd_rmfiles = rm -f $(rm-files)
1424
Masahiro Yamadaf9c235f2014-02-24 11:12:14 +09001425# read all saved command lines
1426
1427targets := $(wildcard $(sort $(targets)))
1428cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1429
1430ifneq ($(cmd_files),)
1431 $(cmd_files): ; # Do not try to update included dependency files
1432 include $(cmd_files)
1433endif
1434
Masahiro Yamadaefcf8612014-02-04 17:24:40 +09001435# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1436# Usage:
1437# $(Q)$(MAKE) $(clean)=dir
1438clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
1439
Masahiro Yamada9e414032014-02-04 17:24:24 +09001440endif # skip-makefile
1441
1442PHONY += FORCE
1443FORCE:
1444
1445# Declare the contents of the .PHONY variable as phony. We keep that
1446# information in a variable so we can use it in if_changed and friends.
1447.PHONY: $(PHONY)