blob: 49479368d215279e902465ea34d861e17c3c1bbf [file] [log] [blame]
Thomas Abrahama1428962009-01-04 09:41:03 +05301/*
2 * Mentor USB OTG Core host controller driver.
3 *
4 * Copyright (c) 2008 Texas Instruments
5 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02006 * SPDX-License-Identifier: GPL-2.0+
Thomas Abrahama1428962009-01-04 09:41:03 +05307 *
8 * Author: Thomas Abraham t-abraham@ti.com, Texas Instruments
9 */
10
11#include <common.h>
Ilya Yanokc60795f2012-11-06 13:48:20 +000012#include <usb.h>
Thomas Abrahama1428962009-01-04 09:41:03 +053013#include "musb_hcd.h"
14
15/* MSC control transfers */
16#define USB_MSC_BBB_RESET 0xFF
17#define USB_MSC_BBB_GET_MAX_LUN 0xFE
18
19/* Endpoint configuration information */
Mike Frysinger02283482010-10-20 07:15:35 -040020static const struct musb_epinfo epinfo[3] = {
Thomas Abrahama1428962009-01-04 09:41:03 +053021 {MUSB_BULK_EP, 1, 512}, /* EP1 - Bluk Out - 512 Bytes */
22 {MUSB_BULK_EP, 0, 512}, /* EP1 - Bluk In - 512 Bytes */
23 {MUSB_INTR_EP, 0, 64} /* EP2 - Interrupt IN - 64 Bytes */
24};
25
Bryan Wu321790f2010-01-09 16:53:54 -050026/* --- Virtual Root Hub ---------------------------------------------------- */
27#ifdef MUSB_NO_MULTIPOINT
28static int rh_devnum;
29static u32 port_status;
30
Stephen Warreneb838e72014-02-13 21:15:18 -070031#include <usbroothubdes.h>
Bryan Wu321790f2010-01-09 16:53:54 -050032
Bryan Wu321790f2010-01-09 16:53:54 -050033#endif
34
Thomas Abrahama1428962009-01-04 09:41:03 +053035/*
36 * This function writes the data toggle value.
37 */
38static void write_toggle(struct usb_device *dev, u8 ep, u8 dir_out)
39{
40 u16 toggle = usb_gettoggle(dev, ep, dir_out);
41 u16 csr;
42
43 if (dir_out) {
Bryan Wu4ee691f2010-08-09 14:58:24 -040044 csr = readw(&musbr->txcsr);
45 if (!toggle) {
46 if (csr & MUSB_TXCSR_MODE)
47 csr = MUSB_TXCSR_CLRDATATOG;
48 else
49 csr = 0;
50 writew(csr, &musbr->txcsr);
51 } else {
Thomas Abrahama1428962009-01-04 09:41:03 +053052 csr |= MUSB_TXCSR_H_WR_DATATOGGLE;
53 writew(csr, &musbr->txcsr);
54 csr |= (toggle << MUSB_TXCSR_H_DATATOGGLE_SHIFT);
55 writew(csr, &musbr->txcsr);
56 }
57 } else {
Bryan Wu4ee691f2010-08-09 14:58:24 -040058 if (!toggle) {
59 csr = readw(&musbr->txcsr);
60 if (csr & MUSB_TXCSR_MODE)
61 csr = MUSB_RXCSR_CLRDATATOG;
62 else
63 csr = 0;
64 writew(csr, &musbr->rxcsr);
65 } else {
Thomas Abrahama1428962009-01-04 09:41:03 +053066 csr = readw(&musbr->rxcsr);
67 csr |= MUSB_RXCSR_H_WR_DATATOGGLE;
68 writew(csr, &musbr->rxcsr);
69 csr |= (toggle << MUSB_S_RXCSR_H_DATATOGGLE);
70 writew(csr, &musbr->rxcsr);
71 }
72 }
73}
74
75/*
Vagrant Cascadianeae4b2b2016-04-30 19:18:00 -070076 * This function checks if RxStall has occurred on the endpoint. If a RxStall
77 * has occurred, the RxStall is cleared and 1 is returned. If RxStall has
78 * not occurred, 0 is returned.
Thomas Abrahama1428962009-01-04 09:41:03 +053079 */
80static u8 check_stall(u8 ep, u8 dir_out)
81{
82 u16 csr;
83
84 /* For endpoint 0 */
85 if (!ep) {
86 csr = readw(&musbr->txcsr);
87 if (csr & MUSB_CSR0_H_RXSTALL) {
88 csr &= ~MUSB_CSR0_H_RXSTALL;
89 writew(csr, &musbr->txcsr);
90 return 1;
91 }
92 } else { /* For non-ep0 */
93 if (dir_out) { /* is it tx ep */
94 csr = readw(&musbr->txcsr);
95 if (csr & MUSB_TXCSR_H_RXSTALL) {
96 csr &= ~MUSB_TXCSR_H_RXSTALL;
97 writew(csr, &musbr->txcsr);
98 return 1;
99 }
100 } else { /* is it rx ep */
101 csr = readw(&musbr->rxcsr);
102 if (csr & MUSB_RXCSR_H_RXSTALL) {
103 csr &= ~MUSB_RXCSR_H_RXSTALL;
104 writew(csr, &musbr->rxcsr);
105 return 1;
106 }
107 }
108 }
109 return 0;
110}
111
112/*
113 * waits until ep0 is ready. Returns 0 if ep is ready, -1 for timeout
114 * error and -2 for stall.
115 */
116static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask)
117{
118 u16 csr;
119 int result = 1;
Paul Kocialkowski95de1e22015-08-04 17:04:06 +0200120 int timeout = CONFIG_USB_MUSB_TIMEOUT;
Thomas Abrahama1428962009-01-04 09:41:03 +0530121
122 while (result > 0) {
123 csr = readw(&musbr->txcsr);
124 if (csr & MUSB_CSR0_H_ERROR) {
125 csr &= ~MUSB_CSR0_H_ERROR;
126 writew(csr, &musbr->txcsr);
127 dev->status = USB_ST_CRC_ERR;
128 result = -1;
129 break;
130 }
131
132 switch (bit_mask) {
133 case MUSB_CSR0_TXPKTRDY:
134 if (!(csr & MUSB_CSR0_TXPKTRDY)) {
135 if (check_stall(MUSB_CONTROL_EP, 0)) {
136 dev->status = USB_ST_STALLED;
137 result = -2;
138 } else
139 result = 0;
140 }
141 break;
142
143 case MUSB_CSR0_RXPKTRDY:
144 if (check_stall(MUSB_CONTROL_EP, 0)) {
145 dev->status = USB_ST_STALLED;
146 result = -2;
147 } else
148 if (csr & MUSB_CSR0_RXPKTRDY)
149 result = 0;
150 break;
151
152 case MUSB_CSR0_H_REQPKT:
153 if (!(csr & MUSB_CSR0_H_REQPKT)) {
154 if (check_stall(MUSB_CONTROL_EP, 0)) {
155 dev->status = USB_ST_STALLED;
156 result = -2;
157 } else
158 result = 0;
159 }
160 break;
161 }
Bryan Wuc3a012c2009-06-16 05:26:27 -0400162
163 /* Check the timeout */
164 if (--timeout)
165 udelay(1);
166 else {
167 dev->status = USB_ST_CRC_ERR;
168 result = -1;
169 break;
170 }
Thomas Abrahama1428962009-01-04 09:41:03 +0530171 }
Bryan Wuc3a012c2009-06-16 05:26:27 -0400172
Thomas Abrahama1428962009-01-04 09:41:03 +0530173 return result;
174}
175
176/*
177 * waits until tx ep is ready. Returns 1 when ep is ready and 0 on error.
178 */
Andrew Murrayddd025b2013-10-01 15:58:56 +0100179static int wait_until_txep_ready(struct usb_device *dev, u8 ep)
Thomas Abrahama1428962009-01-04 09:41:03 +0530180{
181 u16 csr;
Paul Kocialkowski95de1e22015-08-04 17:04:06 +0200182 int timeout = CONFIG_USB_MUSB_TIMEOUT;
Thomas Abrahama1428962009-01-04 09:41:03 +0530183
184 do {
185 if (check_stall(ep, 1)) {
186 dev->status = USB_ST_STALLED;
187 return 0;
188 }
189
190 csr = readw(&musbr->txcsr);
191 if (csr & MUSB_TXCSR_H_ERROR) {
192 dev->status = USB_ST_CRC_ERR;
193 return 0;
194 }
Bryan Wuc3a012c2009-06-16 05:26:27 -0400195
196 /* Check the timeout */
197 if (--timeout)
198 udelay(1);
199 else {
200 dev->status = USB_ST_CRC_ERR;
201 return -1;
202 }
203
Thomas Abrahama1428962009-01-04 09:41:03 +0530204 } while (csr & MUSB_TXCSR_TXPKTRDY);
205 return 1;
206}
207
208/*
209 * waits until rx ep is ready. Returns 1 when ep is ready and 0 on error.
210 */
Andrew Murrayddd025b2013-10-01 15:58:56 +0100211static int wait_until_rxep_ready(struct usb_device *dev, u8 ep)
Thomas Abrahama1428962009-01-04 09:41:03 +0530212{
213 u16 csr;
Paul Kocialkowski95de1e22015-08-04 17:04:06 +0200214 int timeout = CONFIG_USB_MUSB_TIMEOUT;
Thomas Abrahama1428962009-01-04 09:41:03 +0530215
216 do {
217 if (check_stall(ep, 0)) {
218 dev->status = USB_ST_STALLED;
219 return 0;
220 }
221
222 csr = readw(&musbr->rxcsr);
223 if (csr & MUSB_RXCSR_H_ERROR) {
224 dev->status = USB_ST_CRC_ERR;
225 return 0;
226 }
Bryan Wuc3a012c2009-06-16 05:26:27 -0400227
228 /* Check the timeout */
229 if (--timeout)
230 udelay(1);
231 else {
232 dev->status = USB_ST_CRC_ERR;
233 return -1;
234 }
235
Thomas Abrahama1428962009-01-04 09:41:03 +0530236 } while (!(csr & MUSB_RXCSR_RXPKTRDY));
237 return 1;
238}
239
240/*
241 * This function performs the setup phase of the control transfer
242 */
243static int ctrlreq_setup_phase(struct usb_device *dev, struct devrequest *setup)
244{
245 int result;
246 u16 csr;
247
248 /* write the control request to ep0 fifo */
249 write_fifo(MUSB_CONTROL_EP, sizeof(struct devrequest), (void *)setup);
250
251 /* enable transfer of setup packet */
252 csr = readw(&musbr->txcsr);
253 csr |= (MUSB_CSR0_TXPKTRDY|MUSB_CSR0_H_SETUPPKT);
254 writew(csr, &musbr->txcsr);
255
256 /* wait until the setup packet is transmitted */
257 result = wait_until_ep0_ready(dev, MUSB_CSR0_TXPKTRDY);
258 dev->act_len = 0;
259 return result;
260}
261
262/*
263 * This function handles the control transfer in data phase
264 */
265static int ctrlreq_in_data_phase(struct usb_device *dev, u32 len, void *buffer)
266{
267 u16 csr;
268 u32 rxlen = 0;
269 u32 nextlen = 0;
270 u8 maxpktsize = (1 << dev->maxpacketsize) * 8;
271 u8 *rxbuff = (u8 *)buffer;
272 u8 rxedlength;
273 int result;
274
275 while (rxlen < len) {
276 /* Determine the next read length */
277 nextlen = ((len-rxlen) > maxpktsize) ? maxpktsize : (len-rxlen);
278
279 /* Set the ReqPkt bit */
280 csr = readw(&musbr->txcsr);
281 writew(csr | MUSB_CSR0_H_REQPKT, &musbr->txcsr);
282 result = wait_until_ep0_ready(dev, MUSB_CSR0_RXPKTRDY);
283 if (result < 0)
284 return result;
285
286 /* Actual number of bytes received by usb */
287 rxedlength = readb(&musbr->rxcount);
288
289 /* Read the data from the RxFIFO */
290 read_fifo(MUSB_CONTROL_EP, rxedlength, &rxbuff[rxlen]);
291
292 /* Clear the RxPktRdy Bit */
293 csr = readw(&musbr->txcsr);
294 csr &= ~MUSB_CSR0_RXPKTRDY;
295 writew(csr, &musbr->txcsr);
296
297 /* short packet? */
298 if (rxedlength != nextlen) {
299 dev->act_len += rxedlength;
300 break;
301 }
302 rxlen += nextlen;
303 dev->act_len = rxlen;
304 }
305 return 0;
306}
307
308/*
309 * This function handles the control transfer out data phase
310 */
311static int ctrlreq_out_data_phase(struct usb_device *dev, u32 len, void *buffer)
312{
313 u16 csr;
314 u32 txlen = 0;
315 u32 nextlen = 0;
316 u8 maxpktsize = (1 << dev->maxpacketsize) * 8;
317 u8 *txbuff = (u8 *)buffer;
318 int result = 0;
319
320 while (txlen < len) {
321 /* Determine the next write length */
322 nextlen = ((len-txlen) > maxpktsize) ? maxpktsize : (len-txlen);
323
324 /* Load the data to send in FIFO */
325 write_fifo(MUSB_CONTROL_EP, txlen, &txbuff[txlen]);
326
327 /* Set TXPKTRDY bit */
328 csr = readw(&musbr->txcsr);
Andrew Murray99b4eaa2013-09-29 18:02:22 +0100329
330 csr |= MUSB_CSR0_TXPKTRDY;
331#if !defined(CONFIG_SOC_DM365)
332 csr |= MUSB_CSR0_H_DIS_PING;
333#endif
334 writew(csr, &musbr->txcsr);
Thomas Abrahama1428962009-01-04 09:41:03 +0530335 result = wait_until_ep0_ready(dev, MUSB_CSR0_TXPKTRDY);
336 if (result < 0)
337 break;
338
339 txlen += nextlen;
340 dev->act_len = txlen;
341 }
342 return result;
343}
344
345/*
346 * This function handles the control transfer out status phase
347 */
348static int ctrlreq_out_status_phase(struct usb_device *dev)
349{
350 u16 csr;
351 int result;
352
353 /* Set the StatusPkt bit */
354 csr = readw(&musbr->txcsr);
Andrew Murray99b4eaa2013-09-29 18:02:22 +0100355 csr |= (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_H_STATUSPKT);
356#if !defined(CONFIG_SOC_DM365)
357 csr |= MUSB_CSR0_H_DIS_PING;
358#endif
Thomas Abrahama1428962009-01-04 09:41:03 +0530359 writew(csr, &musbr->txcsr);
360
361 /* Wait until TXPKTRDY bit is cleared */
362 result = wait_until_ep0_ready(dev, MUSB_CSR0_TXPKTRDY);
363 return result;
364}
365
366/*
367 * This function handles the control transfer in status phase
368 */
369static int ctrlreq_in_status_phase(struct usb_device *dev)
370{
371 u16 csr;
372 int result;
373
374 /* Set the StatusPkt bit and ReqPkt bit */
Andrew Murray99b4eaa2013-09-29 18:02:22 +0100375 csr = MUSB_CSR0_H_REQPKT | MUSB_CSR0_H_STATUSPKT;
376#if !defined(CONFIG_SOC_DM365)
377 csr |= MUSB_CSR0_H_DIS_PING;
378#endif
Thomas Abrahama1428962009-01-04 09:41:03 +0530379 writew(csr, &musbr->txcsr);
380 result = wait_until_ep0_ready(dev, MUSB_CSR0_H_REQPKT);
381
382 /* clear StatusPkt bit and RxPktRdy bit */
383 csr = readw(&musbr->txcsr);
384 csr &= ~(MUSB_CSR0_RXPKTRDY | MUSB_CSR0_H_STATUSPKT);
385 writew(csr, &musbr->txcsr);
386 return result;
387}
388
389/*
390 * determines the speed of the device (High/Full/Slow)
391 */
392static u8 get_dev_speed(struct usb_device *dev)
393{
Ilya Yanokc60795f2012-11-06 13:48:20 +0000394 return (dev->speed == USB_SPEED_HIGH) ? MUSB_TYPE_SPEED_HIGH :
395 ((dev->speed == USB_SPEED_LOW) ? MUSB_TYPE_SPEED_LOW :
Thomas Abrahama1428962009-01-04 09:41:03 +0530396 MUSB_TYPE_SPEED_FULL);
397}
398
399/*
400 * configure the hub address and the port address.
401 */
402static void config_hub_port(struct usb_device *dev, u8 ep)
403{
404 u8 chid;
405 u8 hub;
406
407 /* Find out the nearest parent which is high speed */
408 while (dev->parent->parent != NULL)
409 if (get_dev_speed(dev->parent) != MUSB_TYPE_SPEED_HIGH)
410 dev = dev->parent;
411 else
412 break;
413
414 /* determine the port address at that hub */
415 hub = dev->parent->devnum;
416 for (chid = 0; chid < USB_MAXCHILDREN; chid++)
417 if (dev->parent->children[chid] == dev)
418 break;
419
Bryan Wu8868fd42009-12-16 22:04:00 -0500420#ifndef MUSB_NO_MULTIPOINT
Thomas Abrahama1428962009-01-04 09:41:03 +0530421 /* configure the hub address and the port address */
422 writeb(hub, &musbr->tar[ep].txhubaddr);
423 writeb((chid + 1), &musbr->tar[ep].txhubport);
424 writeb(hub, &musbr->tar[ep].rxhubaddr);
425 writeb((chid + 1), &musbr->tar[ep].rxhubport);
Bryan Wu8868fd42009-12-16 22:04:00 -0500426#endif
Thomas Abrahama1428962009-01-04 09:41:03 +0530427}
428
Bryan Wu321790f2010-01-09 16:53:54 -0500429#ifdef MUSB_NO_MULTIPOINT
430
431static void musb_port_reset(int do_reset)
432{
433 u8 power = readb(&musbr->power);
434
435 if (do_reset) {
436 power &= 0xf0;
437 writeb(power | MUSB_POWER_RESET, &musbr->power);
438 port_status |= USB_PORT_STAT_RESET;
439 port_status &= ~USB_PORT_STAT_ENABLE;
440 udelay(30000);
441 } else {
442 writeb(power & ~MUSB_POWER_RESET, &musbr->power);
443
444 power = readb(&musbr->power);
445 if (power & MUSB_POWER_HSMODE)
446 port_status |= USB_PORT_STAT_HIGH_SPEED;
447
448 port_status &= ~(USB_PORT_STAT_RESET | (USB_PORT_STAT_C_CONNECTION << 16));
449 port_status |= USB_PORT_STAT_ENABLE
450 | (USB_PORT_STAT_C_RESET << 16)
451 | (USB_PORT_STAT_C_ENABLE << 16);
452 }
453}
454
455/*
456 * root hub control
457 */
458static int musb_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
459 void *buffer, int transfer_len,
460 struct devrequest *cmd)
461{
462 int leni = transfer_len;
463 int len = 0;
464 int stat = 0;
465 u32 datab[4];
Mike Frysinger02283482010-10-20 07:15:35 -0400466 const u8 *data_buf = (u8 *) datab;
Bryan Wu321790f2010-01-09 16:53:54 -0500467 u16 bmRType_bReq;
468 u16 wValue;
469 u16 wIndex;
470 u16 wLength;
471 u16 int_usb;
472
473 if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
474 debug("Root-Hub submit IRQ: NOT implemented\n");
475 return 0;
476 }
477
478 bmRType_bReq = cmd->requesttype | (cmd->request << 8);
479 wValue = swap_16(cmd->value);
480 wIndex = swap_16(cmd->index);
481 wLength = swap_16(cmd->length);
482
483 debug("--- HUB ----------------------------------------\n");
484 debug("submit rh urb, req=%x val=%#x index=%#x len=%d\n",
485 bmRType_bReq, wValue, wIndex, wLength);
486 debug("------------------------------------------------\n");
487
488 switch (bmRType_bReq) {
489 case RH_GET_STATUS:
490 debug("RH_GET_STATUS\n");
491
492 *(__u16 *) data_buf = swap_16(1);
493 len = 2;
494 break;
495
496 case RH_GET_STATUS | RH_INTERFACE:
497 debug("RH_GET_STATUS | RH_INTERFACE\n");
498
499 *(__u16 *) data_buf = swap_16(0);
500 len = 2;
501 break;
502
503 case RH_GET_STATUS | RH_ENDPOINT:
504 debug("RH_GET_STATUS | RH_ENDPOINT\n");
505
506 *(__u16 *) data_buf = swap_16(0);
507 len = 2;
508 break;
509
510 case RH_GET_STATUS | RH_CLASS:
511 debug("RH_GET_STATUS | RH_CLASS\n");
512
513 *(__u32 *) data_buf = swap_32(0);
514 len = 4;
515 break;
516
517 case RH_GET_STATUS | RH_OTHER | RH_CLASS:
518 debug("RH_GET_STATUS | RH_OTHER | RH_CLASS\n");
519
520 int_usb = readw(&musbr->intrusb);
521 if (int_usb & MUSB_INTR_CONNECT) {
522 port_status |= USB_PORT_STAT_CONNECTION
523 | (USB_PORT_STAT_C_CONNECTION << 16);
524 port_status |= USB_PORT_STAT_HIGH_SPEED
525 | USB_PORT_STAT_ENABLE;
526 }
527
528 if (port_status & USB_PORT_STAT_RESET)
529 musb_port_reset(0);
530
531 *(__u32 *) data_buf = swap_32(port_status);
532 len = 4;
533 break;
534
535 case RH_CLEAR_FEATURE | RH_ENDPOINT:
536 debug("RH_CLEAR_FEATURE | RH_ENDPOINT\n");
537
538 switch (wValue) {
539 case RH_ENDPOINT_STALL:
540 debug("C_HUB_ENDPOINT_STALL\n");
541 len = 0;
542 break;
543 }
544 port_status &= ~(1 << wValue);
545 break;
546
547 case RH_CLEAR_FEATURE | RH_CLASS:
548 debug("RH_CLEAR_FEATURE | RH_CLASS\n");
549
550 switch (wValue) {
551 case RH_C_HUB_LOCAL_POWER:
552 debug("C_HUB_LOCAL_POWER\n");
553 len = 0;
554 break;
555
556 case RH_C_HUB_OVER_CURRENT:
557 debug("C_HUB_OVER_CURRENT\n");
558 len = 0;
559 break;
560 }
561 port_status &= ~(1 << wValue);
562 break;
563
564 case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
565 debug("RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS\n");
566
567 switch (wValue) {
568 case RH_PORT_ENABLE:
569 len = 0;
570 break;
571
572 case RH_PORT_SUSPEND:
573 len = 0;
574 break;
575
576 case RH_PORT_POWER:
577 len = 0;
578 break;
579
580 case RH_C_PORT_CONNECTION:
581 len = 0;
582 break;
583
584 case RH_C_PORT_ENABLE:
585 len = 0;
586 break;
587
588 case RH_C_PORT_SUSPEND:
589 len = 0;
590 break;
591
592 case RH_C_PORT_OVER_CURRENT:
593 len = 0;
594 break;
595
596 case RH_C_PORT_RESET:
597 len = 0;
598 break;
599
600 default:
601 debug("invalid wValue\n");
602 stat = USB_ST_STALLED;
603 }
604
605 port_status &= ~(1 << wValue);
606 break;
607
608 case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
609 debug("RH_SET_FEATURE | RH_OTHER | RH_CLASS\n");
610
611 switch (wValue) {
612 case RH_PORT_SUSPEND:
613 len = 0;
614 break;
615
616 case RH_PORT_RESET:
617 musb_port_reset(1);
618 len = 0;
619 break;
620
621 case RH_PORT_POWER:
622 len = 0;
623 break;
624
625 case RH_PORT_ENABLE:
626 len = 0;
627 break;
628
629 default:
630 debug("invalid wValue\n");
631 stat = USB_ST_STALLED;
632 }
633
634 port_status |= 1 << wValue;
635 break;
636
637 case RH_SET_ADDRESS:
638 debug("RH_SET_ADDRESS\n");
639
640 rh_devnum = wValue;
641 len = 0;
642 break;
643
644 case RH_GET_DESCRIPTOR:
645 debug("RH_GET_DESCRIPTOR: %x, %d\n", wValue, wLength);
646
647 switch (wValue) {
648 case (USB_DT_DEVICE << 8): /* device descriptor */
649 len = min_t(unsigned int,
650 leni, min_t(unsigned int,
651 sizeof(root_hub_dev_des),
652 wLength));
653 data_buf = root_hub_dev_des;
654 break;
655
656 case (USB_DT_CONFIG << 8): /* configuration descriptor */
657 len = min_t(unsigned int,
658 leni, min_t(unsigned int,
659 sizeof(root_hub_config_des),
660 wLength));
661 data_buf = root_hub_config_des;
662 break;
663
664 case ((USB_DT_STRING << 8) | 0x00): /* string 0 descriptors */
665 len = min_t(unsigned int,
666 leni, min_t(unsigned int,
667 sizeof(root_hub_str_index0),
668 wLength));
669 data_buf = root_hub_str_index0;
670 break;
671
672 case ((USB_DT_STRING << 8) | 0x01): /* string 1 descriptors */
673 len = min_t(unsigned int,
674 leni, min_t(unsigned int,
675 sizeof(root_hub_str_index1),
676 wLength));
677 data_buf = root_hub_str_index1;
678 break;
679
680 default:
681 debug("invalid wValue\n");
682 stat = USB_ST_STALLED;
683 }
684
685 break;
686
Mike Frysinger02283482010-10-20 07:15:35 -0400687 case RH_GET_DESCRIPTOR | RH_CLASS: {
688 u8 *_data_buf = (u8 *) datab;
Bryan Wu321790f2010-01-09 16:53:54 -0500689 debug("RH_GET_DESCRIPTOR | RH_CLASS\n");
690
Mike Frysinger02283482010-10-20 07:15:35 -0400691 _data_buf[0] = 0x09; /* min length; */
692 _data_buf[1] = 0x29;
693 _data_buf[2] = 0x1; /* 1 port */
694 _data_buf[3] = 0x01; /* per-port power switching */
695 _data_buf[3] |= 0x10; /* no overcurrent reporting */
Bryan Wu321790f2010-01-09 16:53:54 -0500696
697 /* Corresponds to data_buf[4-7] */
Mike Frysinger02283482010-10-20 07:15:35 -0400698 _data_buf[4] = 0;
699 _data_buf[5] = 5;
700 _data_buf[6] = 0;
701 _data_buf[7] = 0x02;
702 _data_buf[8] = 0xff;
Bryan Wu321790f2010-01-09 16:53:54 -0500703
704 len = min_t(unsigned int, leni,
705 min_t(unsigned int, data_buf[0], wLength));
706 break;
Mike Frysinger02283482010-10-20 07:15:35 -0400707 }
Bryan Wu321790f2010-01-09 16:53:54 -0500708
709 case RH_GET_CONFIGURATION:
710 debug("RH_GET_CONFIGURATION\n");
711
712 *(__u8 *) data_buf = 0x01;
713 len = 1;
714 break;
715
716 case RH_SET_CONFIGURATION:
717 debug("RH_SET_CONFIGURATION\n");
718
719 len = 0;
720 break;
721
722 default:
723 debug("*** *** *** unsupported root hub command *** *** ***\n");
724 stat = USB_ST_STALLED;
725 }
726
727 len = min_t(int, len, leni);
728 if (buffer != data_buf)
729 memcpy(buffer, data_buf, len);
730
731 dev->act_len = len;
732 dev->status = stat;
Mike Frysingerb9743082012-02-03 03:03:04 +0000733 debug("dev act_len %d, status %lu\n", dev->act_len, dev->status);
Bryan Wu321790f2010-01-09 16:53:54 -0500734
735 return stat;
736}
737
738static void musb_rh_init(void)
739{
740 rh_devnum = 0;
741 port_status = 0;
742}
743
744#else
745
746static void musb_rh_init(void) {}
747
748#endif
749
Thomas Abrahama1428962009-01-04 09:41:03 +0530750/*
751 * do a control transfer
752 */
753int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
754 int len, struct devrequest *setup)
755{
756 int devnum = usb_pipedevice(pipe);
Thomas Abrahama1428962009-01-04 09:41:03 +0530757 u8 devspeed;
758
Bryan Wu321790f2010-01-09 16:53:54 -0500759#ifdef MUSB_NO_MULTIPOINT
760 /* Control message is for the HUB? */
Cliff Caib17ce922011-04-21 12:42:10 -0400761 if (devnum == rh_devnum) {
762 int stat = musb_submit_rh_msg(dev, pipe, buffer, len, setup);
763 if (stat)
764 return stat;
765 }
Bryan Wu321790f2010-01-09 16:53:54 -0500766#endif
767
Thomas Abrahama1428962009-01-04 09:41:03 +0530768 /* select control endpoint */
769 writeb(MUSB_CONTROL_EP, &musbr->index);
Anatolij Gustschin94191962011-11-19 13:12:09 +0000770 readw(&musbr->txcsr);
Thomas Abrahama1428962009-01-04 09:41:03 +0530771
Bryan Wu8868fd42009-12-16 22:04:00 -0500772#ifndef MUSB_NO_MULTIPOINT
Thomas Abrahama1428962009-01-04 09:41:03 +0530773 /* target addr and (for multipoint) hub addr/port */
774 writeb(devnum, &musbr->tar[MUSB_CONTROL_EP].txfuncaddr);
775 writeb(devnum, &musbr->tar[MUSB_CONTROL_EP].rxfuncaddr);
Bryan Wu8868fd42009-12-16 22:04:00 -0500776#endif
Thomas Abrahama1428962009-01-04 09:41:03 +0530777
778 /* configure the hub address and the port number as required */
779 devspeed = get_dev_speed(dev);
780 if ((musb_ishighspeed()) && (dev->parent != NULL) &&
781 (devspeed != MUSB_TYPE_SPEED_HIGH)) {
782 config_hub_port(dev, MUSB_CONTROL_EP);
783 writeb(devspeed << 6, &musbr->txtype);
784 } else {
785 writeb(musb_cfg.musb_speed << 6, &musbr->txtype);
Bryan Wu8868fd42009-12-16 22:04:00 -0500786#ifndef MUSB_NO_MULTIPOINT
Thomas Abrahama1428962009-01-04 09:41:03 +0530787 writeb(0, &musbr->tar[MUSB_CONTROL_EP].txhubaddr);
788 writeb(0, &musbr->tar[MUSB_CONTROL_EP].txhubport);
789 writeb(0, &musbr->tar[MUSB_CONTROL_EP].rxhubaddr);
790 writeb(0, &musbr->tar[MUSB_CONTROL_EP].rxhubport);
Bryan Wu8868fd42009-12-16 22:04:00 -0500791#endif
Thomas Abrahama1428962009-01-04 09:41:03 +0530792 }
793
794 /* Control transfer setup phase */
795 if (ctrlreq_setup_phase(dev, setup) < 0)
796 return 0;
797
798 switch (setup->request) {
799 case USB_REQ_GET_DESCRIPTOR:
800 case USB_REQ_GET_CONFIGURATION:
801 case USB_REQ_GET_INTERFACE:
802 case USB_REQ_GET_STATUS:
803 case USB_MSC_BBB_GET_MAX_LUN:
804 /* control transfer in-data-phase */
805 if (ctrlreq_in_data_phase(dev, len, buffer) < 0)
806 return 0;
807 /* control transfer out-status-phase */
808 if (ctrlreq_out_status_phase(dev) < 0)
809 return 0;
810 break;
811
812 case USB_REQ_SET_ADDRESS:
813 case USB_REQ_SET_CONFIGURATION:
814 case USB_REQ_SET_FEATURE:
815 case USB_REQ_SET_INTERFACE:
816 case USB_REQ_CLEAR_FEATURE:
817 case USB_MSC_BBB_RESET:
818 /* control transfer in status phase */
819 if (ctrlreq_in_status_phase(dev) < 0)
820 return 0;
821 break;
822
823 case USB_REQ_SET_DESCRIPTOR:
824 /* control transfer out data phase */
825 if (ctrlreq_out_data_phase(dev, len, buffer) < 0)
826 return 0;
827 /* control transfer in status phase */
828 if (ctrlreq_in_status_phase(dev) < 0)
829 return 0;
830 break;
831
832 default:
833 /* unhandled control transfer */
834 return -1;
835 }
836
837 dev->status = 0;
838 dev->act_len = len;
Bryan Wu93ceb472010-08-09 18:41:12 -0400839
840#ifdef MUSB_NO_MULTIPOINT
841 /* Set device address to USB_FADDR register */
842 if (setup->request == USB_REQ_SET_ADDRESS)
843 writeb(dev->devnum, &musbr->faddr);
844#endif
845
Thomas Abrahama1428962009-01-04 09:41:03 +0530846 return len;
847}
848
849/*
850 * do a bulk transfer
851 */
852int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
853 void *buffer, int len)
854{
855 int dir_out = usb_pipeout(pipe);
856 int ep = usb_pipeendpoint(pipe);
Bryan Wu8868fd42009-12-16 22:04:00 -0500857#ifndef MUSB_NO_MULTIPOINT
Thomas Abrahama1428962009-01-04 09:41:03 +0530858 int devnum = usb_pipedevice(pipe);
Bryan Wu8868fd42009-12-16 22:04:00 -0500859#endif
Thomas Abrahama1428962009-01-04 09:41:03 +0530860 u8 type;
861 u16 csr;
862 u32 txlen = 0;
863 u32 nextlen = 0;
864 u8 devspeed;
865
866 /* select bulk endpoint */
867 writeb(MUSB_BULK_EP, &musbr->index);
868
Bryan Wu8868fd42009-12-16 22:04:00 -0500869#ifndef MUSB_NO_MULTIPOINT
Thomas Abrahama1428962009-01-04 09:41:03 +0530870 /* write the address of the device */
871 if (dir_out)
872 writeb(devnum, &musbr->tar[MUSB_BULK_EP].txfuncaddr);
873 else
874 writeb(devnum, &musbr->tar[MUSB_BULK_EP].rxfuncaddr);
Bryan Wu8868fd42009-12-16 22:04:00 -0500875#endif
Thomas Abrahama1428962009-01-04 09:41:03 +0530876
877 /* configure the hub address and the port number as required */
878 devspeed = get_dev_speed(dev);
879 if ((musb_ishighspeed()) && (dev->parent != NULL) &&
880 (devspeed != MUSB_TYPE_SPEED_HIGH)) {
881 /*
882 * MUSB is in high speed and the destination device is full
883 * speed device. So configure the hub address and port
884 * address registers.
885 */
886 config_hub_port(dev, MUSB_BULK_EP);
887 } else {
Bryan Wu8868fd42009-12-16 22:04:00 -0500888#ifndef MUSB_NO_MULTIPOINT
Thomas Abrahama1428962009-01-04 09:41:03 +0530889 if (dir_out) {
890 writeb(0, &musbr->tar[MUSB_BULK_EP].txhubaddr);
891 writeb(0, &musbr->tar[MUSB_BULK_EP].txhubport);
892 } else {
893 writeb(0, &musbr->tar[MUSB_BULK_EP].rxhubaddr);
894 writeb(0, &musbr->tar[MUSB_BULK_EP].rxhubport);
895 }
Bryan Wu8868fd42009-12-16 22:04:00 -0500896#endif
Thomas Abrahama1428962009-01-04 09:41:03 +0530897 devspeed = musb_cfg.musb_speed;
898 }
899
900 /* Write the saved toggle bit value */
901 write_toggle(dev, ep, dir_out);
902
903 if (dir_out) { /* bulk-out transfer */
904 /* Program the TxType register */
905 type = (devspeed << MUSB_TYPE_SPEED_SHIFT) |
906 (MUSB_TYPE_PROTO_BULK << MUSB_TYPE_PROTO_SHIFT) |
907 (ep & MUSB_TYPE_REMOTE_END);
908 writeb(type, &musbr->txtype);
909
910 /* Write maximum packet size to the TxMaxp register */
911 writew(dev->epmaxpacketout[ep], &musbr->txmaxp);
912 while (txlen < len) {
913 nextlen = ((len-txlen) < dev->epmaxpacketout[ep]) ?
914 (len-txlen) : dev->epmaxpacketout[ep];
915
Bryan Wu8dd7a232010-08-09 14:57:41 -0400916#ifdef CONFIG_USB_BLACKFIN
917 /* Set the transfer data size */
918 writew(nextlen, &musbr->txcount);
919#endif
920
Thomas Abrahama1428962009-01-04 09:41:03 +0530921 /* Write the data to the FIFO */
922 write_fifo(MUSB_BULK_EP, nextlen,
923 (void *)(((u8 *)buffer) + txlen));
924
925 /* Set the TxPktRdy bit */
926 csr = readw(&musbr->txcsr);
927 writew(csr | MUSB_TXCSR_TXPKTRDY, &musbr->txcsr);
928
929 /* Wait until the TxPktRdy bit is cleared */
Andrew Murrayddd025b2013-10-01 15:58:56 +0100930 if (wait_until_txep_ready(dev, MUSB_BULK_EP) != 1) {
Thomas Abrahama1428962009-01-04 09:41:03 +0530931 readw(&musbr->txcsr);
932 usb_settoggle(dev, ep, dir_out,
933 (csr >> MUSB_TXCSR_H_DATATOGGLE_SHIFT) & 1);
934 dev->act_len = txlen;
935 return 0;
936 }
937 txlen += nextlen;
938 }
939
940 /* Keep a copy of the data toggle bit */
941 csr = readw(&musbr->txcsr);
942 usb_settoggle(dev, ep, dir_out,
943 (csr >> MUSB_TXCSR_H_DATATOGGLE_SHIFT) & 1);
944 } else { /* bulk-in transfer */
945 /* Write the saved toggle bit value */
946 write_toggle(dev, ep, dir_out);
947
948 /* Program the RxType register */
949 type = (devspeed << MUSB_TYPE_SPEED_SHIFT) |
950 (MUSB_TYPE_PROTO_BULK << MUSB_TYPE_PROTO_SHIFT) |
951 (ep & MUSB_TYPE_REMOTE_END);
952 writeb(type, &musbr->rxtype);
953
954 /* Write the maximum packet size to the RxMaxp register */
955 writew(dev->epmaxpacketin[ep], &musbr->rxmaxp);
956 while (txlen < len) {
957 nextlen = ((len-txlen) < dev->epmaxpacketin[ep]) ?
958 (len-txlen) : dev->epmaxpacketin[ep];
959
960 /* Set the ReqPkt bit */
Bryan Wubc72a912009-12-16 22:04:01 -0500961 csr = readw(&musbr->rxcsr);
962 writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
Thomas Abrahama1428962009-01-04 09:41:03 +0530963
964 /* Wait until the RxPktRdy bit is set */
Andrew Murrayddd025b2013-10-01 15:58:56 +0100965 if (wait_until_rxep_ready(dev, MUSB_BULK_EP) != 1) {
Thomas Abrahama1428962009-01-04 09:41:03 +0530966 csr = readw(&musbr->rxcsr);
967 usb_settoggle(dev, ep, dir_out,
968 (csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
969 csr &= ~MUSB_RXCSR_RXPKTRDY;
970 writew(csr, &musbr->rxcsr);
971 dev->act_len = txlen;
972 return 0;
973 }
974
975 /* Read the data from the FIFO */
976 read_fifo(MUSB_BULK_EP, nextlen,
977 (void *)(((u8 *)buffer) + txlen));
978
979 /* Clear the RxPktRdy bit */
980 csr = readw(&musbr->rxcsr);
981 csr &= ~MUSB_RXCSR_RXPKTRDY;
982 writew(csr, &musbr->rxcsr);
983 txlen += nextlen;
984 }
985
986 /* Keep a copy of the data toggle bit */
987 csr = readw(&musbr->rxcsr);
988 usb_settoggle(dev, ep, dir_out,
989 (csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
990 }
991
992 /* bulk transfer is complete */
993 dev->status = 0;
994 dev->act_len = len;
995 return 0;
996}
997
998/*
999 * This function initializes the usb controller module.
1000 */
Troy Kisky06d513e2013-10-10 15:27:56 -07001001int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
Thomas Abrahama1428962009-01-04 09:41:03 +05301002{
1003 u8 power;
1004 u32 timeout;
1005
Bryan Wu321790f2010-01-09 16:53:54 -05001006 musb_rh_init();
1007
Thomas Abrahama1428962009-01-04 09:41:03 +05301008 if (musb_platform_init() == -1)
1009 return -1;
1010
1011 /* Configure all the endpoint FIFO's and start usb controller */
1012 musbr = musb_cfg.regs;
Axel Line31dc612013-06-23 00:57:46 +08001013 musb_configure_ep(&epinfo[0], ARRAY_SIZE(epinfo));
Thomas Abrahama1428962009-01-04 09:41:03 +05301014 musb_start();
1015
1016 /*
1017 * Wait until musb is enabled in host mode with a timeout. There
1018 * should be a usb device connected.
1019 */
1020 timeout = musb_cfg.timeout;
Matej Frančeškin8c865012012-08-30 09:24:39 +02001021 while (--timeout)
Thomas Abrahama1428962009-01-04 09:41:03 +05301022 if (readb(&musbr->devctl) & MUSB_DEVCTL_HM)
1023 break;
1024
1025 /* if musb core is not in host mode, then return */
1026 if (!timeout)
1027 return -1;
1028
1029 /* start usb bus reset */
1030 power = readb(&musbr->power);
1031 writeb(power | MUSB_POWER_RESET, &musbr->power);
1032
1033 /* After initiating a usb reset, wait for about 20ms to 30ms */
1034 udelay(30000);
1035
1036 /* stop usb bus reset */
1037 power = readb(&musbr->power);
1038 power &= ~MUSB_POWER_RESET;
1039 writeb(power, &musbr->power);
1040
1041 /* Determine if the connected device is a high/full/low speed device */
1042 musb_cfg.musb_speed = (readb(&musbr->power) & MUSB_POWER_HSMODE) ?
1043 MUSB_TYPE_SPEED_HIGH :
1044 ((readb(&musbr->devctl) & MUSB_DEVCTL_FSDEV) ?
1045 MUSB_TYPE_SPEED_FULL : MUSB_TYPE_SPEED_LOW);
1046 return 0;
1047}
1048
1049/*
1050 * This function stops the operation of the davinci usb module.
1051 */
Lucas Stachc7e3b2b2012-09-26 00:14:34 +02001052int usb_lowlevel_stop(int index)
Thomas Abrahama1428962009-01-04 09:41:03 +05301053{
1054 /* Reset the USB module */
1055 musb_platform_deinit();
1056 writeb(0, &musbr->devctl);
1057 return 0;
1058}
1059
1060/*
1061 * This function supports usb interrupt transfers. Currently, usb interrupt
1062 * transfers are not supported.
1063 */
1064int submit_int_msg(struct usb_device *dev, unsigned long pipe,
1065 void *buffer, int len, int interval)
1066{
1067 int dir_out = usb_pipeout(pipe);
1068 int ep = usb_pipeendpoint(pipe);
Bryan Wu8868fd42009-12-16 22:04:00 -05001069#ifndef MUSB_NO_MULTIPOINT
Thomas Abrahama1428962009-01-04 09:41:03 +05301070 int devnum = usb_pipedevice(pipe);
Bryan Wu8868fd42009-12-16 22:04:00 -05001071#endif
Thomas Abrahama1428962009-01-04 09:41:03 +05301072 u8 type;
1073 u16 csr;
1074 u32 txlen = 0;
1075 u32 nextlen = 0;
1076 u8 devspeed;
1077
1078 /* select interrupt endpoint */
1079 writeb(MUSB_INTR_EP, &musbr->index);
1080
Bryan Wu8868fd42009-12-16 22:04:00 -05001081#ifndef MUSB_NO_MULTIPOINT
Thomas Abrahama1428962009-01-04 09:41:03 +05301082 /* write the address of the device */
1083 if (dir_out)
1084 writeb(devnum, &musbr->tar[MUSB_INTR_EP].txfuncaddr);
1085 else
1086 writeb(devnum, &musbr->tar[MUSB_INTR_EP].rxfuncaddr);
Bryan Wu8868fd42009-12-16 22:04:00 -05001087#endif
Thomas Abrahama1428962009-01-04 09:41:03 +05301088
1089 /* configure the hub address and the port number as required */
1090 devspeed = get_dev_speed(dev);
1091 if ((musb_ishighspeed()) && (dev->parent != NULL) &&
1092 (devspeed != MUSB_TYPE_SPEED_HIGH)) {
1093 /*
1094 * MUSB is in high speed and the destination device is full
1095 * speed device. So configure the hub address and port
1096 * address registers.
1097 */
1098 config_hub_port(dev, MUSB_INTR_EP);
1099 } else {
Bryan Wu8868fd42009-12-16 22:04:00 -05001100#ifndef MUSB_NO_MULTIPOINT
Thomas Abrahama1428962009-01-04 09:41:03 +05301101 if (dir_out) {
1102 writeb(0, &musbr->tar[MUSB_INTR_EP].txhubaddr);
1103 writeb(0, &musbr->tar[MUSB_INTR_EP].txhubport);
1104 } else {
1105 writeb(0, &musbr->tar[MUSB_INTR_EP].rxhubaddr);
1106 writeb(0, &musbr->tar[MUSB_INTR_EP].rxhubport);
1107 }
Bryan Wu8868fd42009-12-16 22:04:00 -05001108#endif
Thomas Abrahama1428962009-01-04 09:41:03 +05301109 devspeed = musb_cfg.musb_speed;
1110 }
1111
1112 /* Write the saved toggle bit value */
1113 write_toggle(dev, ep, dir_out);
1114
1115 if (!dir_out) { /* intrrupt-in transfer */
1116 /* Write the saved toggle bit value */
1117 write_toggle(dev, ep, dir_out);
1118 writeb(interval, &musbr->rxinterval);
1119
1120 /* Program the RxType register */
1121 type = (devspeed << MUSB_TYPE_SPEED_SHIFT) |
1122 (MUSB_TYPE_PROTO_INTR << MUSB_TYPE_PROTO_SHIFT) |
1123 (ep & MUSB_TYPE_REMOTE_END);
1124 writeb(type, &musbr->rxtype);
1125
1126 /* Write the maximum packet size to the RxMaxp register */
1127 writew(dev->epmaxpacketin[ep], &musbr->rxmaxp);
1128
1129 while (txlen < len) {
1130 nextlen = ((len-txlen) < dev->epmaxpacketin[ep]) ?
1131 (len-txlen) : dev->epmaxpacketin[ep];
1132
1133 /* Set the ReqPkt bit */
Bryan Wubc72a912009-12-16 22:04:01 -05001134 csr = readw(&musbr->rxcsr);
1135 writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
Thomas Abrahama1428962009-01-04 09:41:03 +05301136
1137 /* Wait until the RxPktRdy bit is set */
Andrew Murrayddd025b2013-10-01 15:58:56 +01001138 if (wait_until_rxep_ready(dev, MUSB_INTR_EP) != 1) {
Thomas Abrahama1428962009-01-04 09:41:03 +05301139 csr = readw(&musbr->rxcsr);
1140 usb_settoggle(dev, ep, dir_out,
1141 (csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
1142 csr &= ~MUSB_RXCSR_RXPKTRDY;
1143 writew(csr, &musbr->rxcsr);
1144 dev->act_len = txlen;
1145 return 0;
1146 }
1147
1148 /* Read the data from the FIFO */
1149 read_fifo(MUSB_INTR_EP, nextlen,
1150 (void *)(((u8 *)buffer) + txlen));
1151
1152 /* Clear the RxPktRdy bit */
1153 csr = readw(&musbr->rxcsr);
1154 csr &= ~MUSB_RXCSR_RXPKTRDY;
1155 writew(csr, &musbr->rxcsr);
1156 txlen += nextlen;
1157 }
1158
1159 /* Keep a copy of the data toggle bit */
1160 csr = readw(&musbr->rxcsr);
1161 usb_settoggle(dev, ep, dir_out,
1162 (csr >> MUSB_S_RXCSR_H_DATATOGGLE) & 1);
1163 }
1164
1165 /* interrupt transfer is complete */
1166 dev->irq_status = 0;
1167 dev->irq_act_len = len;
1168 dev->irq_handle(dev);
1169 dev->status = 0;
1170 dev->act_len = len;
1171 return 0;
1172}