blob: 2712b27fd16a04484f3927c7da23de371b5dd198 [file] [log] [blame]
Peng Fanf0ff57b2015-07-20 19:28:35 +08001/*
2 * Copyright (C) 2015 Freescale Semiconductor, Inc.
3 *
4 * Configuration settings for the Freescale i.MX6UL 14x14 EVK board.
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8#ifndef __MX6UL_14X14_EVK_CONFIG_H
9#define __MX6UL_14X14_EVK_CONFIG_H
10
11
12#include <asm/arch/imx-regs.h>
13#include <linux/sizes.h>
14#include "mx6_common.h"
15#include <asm/imx-common/gpio.h>
16
Peng Fand9cbb262015-09-06 15:02:34 +080017#define is_mx6ul_9x9_evk() CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK)
18
Peng Fanf0ff57b2015-07-20 19:28:35 +080019/* SPL options */
20#define CONFIG_SPL_LIBCOMMON_SUPPORT
21#define CONFIG_SPL_MMC_SUPPORT
Peng Fanf0ff57b2015-07-20 19:28:35 +080022#include "imx6_spl.h"
23
Peng Fand9cbb262015-09-06 15:02:34 +080024#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
25
Peng Fanf0ff57b2015-07-20 19:28:35 +080026#define CONFIG_DISPLAY_CPUINFO
27#define CONFIG_DISPLAY_BOARDINFO
28
29/* Size of malloc() pool */
30#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
31
32#define CONFIG_BOARD_EARLY_INIT_F
33#define CONFIG_BOARD_LATE_INIT
34
35#define CONFIG_MXC_UART
36#define CONFIG_MXC_UART_BASE UART1_BASE
37
Peng Fanf0ff57b2015-07-20 19:28:35 +080038/* MMC Configs */
39#ifdef CONFIG_FSL_USDHC
40#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
41
42/* NAND pin conflicts with usdhc2 */
43#ifdef CONFIG_NAND_MXS
44#define CONFIG_SYS_FSL_USDHC_NUM 1
45#else
46#define CONFIG_SYS_FSL_USDHC_NUM 2
47#endif
48
49#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
50#endif
51
Peng Fanf0ff57b2015-07-20 19:28:35 +080052/* I2C configs */
53#define CONFIG_CMD_I2C
54#ifdef CONFIG_CMD_I2C
55#define CONFIG_SYS_I2C
56#define CONFIG_SYS_I2C_MXC
Albert ARIBAUD \\(3ADEV\\)03544c62015-09-21 22:43:38 +020057#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
58#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
Peng Fanf0ff57b2015-07-20 19:28:35 +080059#define CONFIG_SYS_I2C_SPEED 100000
Peng Fanf0ff57b2015-07-20 19:28:35 +080060
Peng Fand9cbb262015-09-06 15:02:34 +080061/* PMIC only for 9X9 EVK */
62#define CONFIG_POWER
63#define CONFIG_POWER_I2C
64#define CONFIG_POWER_PFUZE3000
65#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
66#endif
Peng Fanf0ff57b2015-07-20 19:28:35 +080067
Peng Fanf0ff57b2015-07-20 19:28:35 +080068#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
69
70#define CONFIG_EXTRA_ENV_SETTINGS \
71 "script=boot.scr\0" \
72 "image=zImage\0" \
73 "console=ttymxc0\0" \
74 "fdt_high=0xffffffff\0" \
75 "initrd_high=0xffffffff\0" \
Peng Fand9cbb262015-09-06 15:02:34 +080076 "fdt_file=undefined\0" \
Peng Fanf0ff57b2015-07-20 19:28:35 +080077 "fdt_addr=0x83000000\0" \
78 "boot_fdt=try\0" \
79 "ip_dyn=yes\0" \
Peng Fandf674902015-10-29 15:54:48 +080080 "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
Peng Fanf0ff57b2015-07-20 19:28:35 +080081 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
82 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
83 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
84 "mmcautodetect=yes\0" \
85 "mmcargs=setenv bootargs console=${console},${baudrate} " \
86 "root=${mmcroot}\0" \
87 "loadbootscript=" \
88 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
89 "bootscript=echo Running bootscript from mmc ...; " \
90 "source\0" \
91 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
92 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
93 "mmcboot=echo Booting from mmc ...; " \
94 "run mmcargs; " \
95 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
96 "if run loadfdt; then " \
97 "bootz ${loadaddr} - ${fdt_addr}; " \
98 "else " \
99 "if test ${boot_fdt} = try; then " \
100 "bootz; " \
101 "else " \
102 "echo WARN: Cannot load the DT; " \
103 "fi; " \
104 "fi; " \
105 "else " \
106 "bootz; " \
107 "fi;\0" \
108 "netargs=setenv bootargs console=${console},${baudrate} " \
109 "root=/dev/nfs " \
110 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
111 "netboot=echo Booting from net ...; " \
112 "run netargs; " \
113 "if test ${ip_dyn} = yes; then " \
114 "setenv get_cmd dhcp; " \
115 "else " \
116 "setenv get_cmd tftp; " \
117 "fi; " \
118 "${get_cmd} ${image}; " \
119 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
120 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
121 "bootz ${loadaddr} - ${fdt_addr}; " \
122 "else " \
123 "if test ${boot_fdt} = try; then " \
124 "bootz; " \
125 "else " \
126 "echo WARN: Cannot load the DT; " \
127 "fi; " \
128 "fi; " \
129 "else " \
130 "bootz; " \
Peng Fand9cbb262015-09-06 15:02:34 +0800131 "fi;\0" \
132 "findfdt="\
133 "if test $fdt_file = undefined; then " \
134 "if test $board_name = EVK && test $board_rev = 9X9; then " \
135 "setenv fdt_file imx6ul-9x9-evk.dtb; fi; " \
136 "if test $board_name = EVK && test $board_rev = 14X14; then " \
137 "setenv fdt_file imx6ul-14x14-evk.dtb; fi; " \
138 "if test $fdt_file = undefined; then " \
139 "echo WARNING: Could not determine dtb to use; fi; " \
140 "fi;\0" \
Peng Fanf0ff57b2015-07-20 19:28:35 +0800141
142#define CONFIG_BOOTCOMMAND \
Peng Fand9cbb262015-09-06 15:02:34 +0800143 "run findfdt;" \
Peng Fanf0ff57b2015-07-20 19:28:35 +0800144 "mmc dev ${mmcdev};" \
145 "mmc dev ${mmcdev}; if mmc rescan; then " \
146 "if run loadbootscript; then " \
147 "run bootscript; " \
148 "else " \
149 "if run loadimage; then " \
150 "run mmcboot; " \
151 "else run netboot; " \
152 "fi; " \
153 "fi; " \
154 "else run netboot; fi"
155
156/* Miscellaneous configurable options */
Peng Fanf0ff57b2015-07-20 19:28:35 +0800157#define CONFIG_CMD_MEMTEST
158#define CONFIG_SYS_MEMTEST_START 0x80000000
159#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000000)
160
161#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
162#define CONFIG_SYS_HZ 1000
163
164#define CONFIG_CMDLINE_EDITING
165#define CONFIG_STACKSIZE SZ_128K
166
167/* Physical Memory Map */
168#define CONFIG_NR_DRAM_BANKS 1
169#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
170
171#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
172#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
173#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
174
175#define CONFIG_SYS_INIT_SP_OFFSET \
176 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
177#define CONFIG_SYS_INIT_SP_ADDR \
178 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
179
180/* FLASH and environment organization */
181#define CONFIG_SYS_NO_FLASH
182
183#define CONFIG_ENV_SIZE SZ_8K
184#define CONFIG_ENV_IS_IN_MMC
185#define CONFIG_ENV_OFFSET (8 * SZ_64K)
186#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */
187#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
188#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
189
190#define CONFIG_OF_LIBFDT
191#define CONFIG_CMD_BOOTZ
192#define CONFIG_CMD_BMODE
193
194#ifndef CONFIG_SYS_DCACHE_OFF
195#define CONFIG_CMD_CACHE
196#endif
197
Peng Fanf0ff57b2015-07-20 19:28:35 +0800198#ifdef CONFIG_FSL_QSPI
199#define CONFIG_CMD_SF
200#define CONFIG_SPI_FLASH
Peng Fanf0ff57b2015-07-20 19:28:35 +0800201#define CONFIG_SPI_FLASH_BAR
202#define CONFIG_SF_DEFAULT_BUS 0
203#define CONFIG_SF_DEFAULT_CS 0
204#define CONFIG_SF_DEFAULT_SPEED 40000000
205#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
206#define FSL_QSPI_FLASH_NUM 1
207#define FSL_QSPI_FLASH_SIZE SZ_32M
208#endif
209
210/* USB Configs */
211#define CONFIG_CMD_USB
212#ifdef CONFIG_CMD_USB
213#define CONFIG_USB_EHCI
214#define CONFIG_USB_EHCI_MX6
215#define CONFIG_USB_STORAGE
216#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
217#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
218#define CONFIG_MXC_USB_FLAGS 0
219#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
220#endif
221
Peng Fan0d4cdb52015-08-12 17:46:52 +0800222#ifdef CONFIG_CMD_NET
223#define CONFIG_FEC_MXC
224#define CONFIG_MII
225#define CONFIG_FEC_ENET_DEV 1
226
227#if (CONFIG_FEC_ENET_DEV == 0)
228#define IMX_FEC_BASE ENET_BASE_ADDR
229#define CONFIG_FEC_MXC_PHYADDR 0x2
230#define CONFIG_FEC_XCV_TYPE RMII
231#elif (CONFIG_FEC_ENET_DEV == 1)
232#define IMX_FEC_BASE ENET2_BASE_ADDR
233#define CONFIG_FEC_MXC_PHYADDR 0x1
234#define CONFIG_FEC_XCV_TYPE RMII
235#endif
236#define CONFIG_ETHPRIME "FEC"
237
238#define CONFIG_PHYLIB
239#define CONFIG_PHY_MICREL
Peng Fan0d4cdb52015-08-12 17:46:52 +0800240#endif
241
Adrian Alonso1368f992015-09-02 13:54:13 -0500242#define CONFIG_IMX_THERMAL
Peng Fanf0ff57b2015-07-20 19:28:35 +0800243
Peng Fandf674902015-10-29 15:54:48 +0800244#define CONFIG_VIDEO
245#ifdef CONFIG_VIDEO
246#define CONFIG_CFB_CONSOLE
247#define CONFIG_VIDEO_MXS
248#define CONFIG_VIDEO_LOGO
249#define CONFIG_VIDEO_SW_CURSOR
250#define CONFIG_VGA_AS_SINGLE_DEVICE
251#define CONFIG_SYS_CONSOLE_IS_IN_ENV
252#define CONFIG_SPLASH_SCREEN
253#define CONFIG_SPLASH_SCREEN_ALIGN
254#define CONFIG_CMD_BMP
255#define CONFIG_BMP_16BPP
256#define CONFIG_VIDEO_BMP_RLE8
257#define CONFIG_VIDEO_BMP_LOGO
258#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
259#endif
260
Peng Fanf0ff57b2015-07-20 19:28:35 +0800261#endif