blob: cfba667cab25fdd2d15eecd751c01e95e47daaf1 [file] [log] [blame]
wdenk0f89ba42000-11-16 20:23:11 +00001/*
2 * definitions for MPC8260 I/O Ports
3 *
4 * (in addition to those provided in <asm/immap_8260.h>)
5 *
6 * Murray.Jensen@cmst.csiro.au, 20-Oct-00
7 */
8
9/*
10 * this structure mirrors the layout of the five port registers in
11 * the internal memory map - see iop8260_t in <asm/immap_8260.h>
12 */
13typedef struct {
14 unsigned int pdir; /* Port Data Direction Register (35-3) */
15 unsigned int ppar; /* Port Pin Assignment Register (35-4) */
16 unsigned int psor; /* Port Special Options Register (35-5) */
17 unsigned int podr; /* Port Open Drain Register (35-2) */
18 unsigned int pdat; /* Port Data Register (35-3) */
19} ioport_t;
20
21/*
22 * this macro calculates the address within the internal
23 * memory map (im) of the set of registers for a port (idx)
24 *
25 * the internal memory map aligns the above structure on
26 * a 0x20 byte boundary
27 */
Jon Loeliger9c4c5ae2005-07-23 10:37:35 -050028#ifdef CONFIG_MPC85xx
wdenk42d1f032003-10-15 23:53:47 +000029#define ioport_addr(im, idx) (ioport_t *)((uint)&((im)->im_cpm.im_cpm_iop) + ((idx)*0x20))
30#else
wdenk0f89ba42000-11-16 20:23:11 +000031#define ioport_addr(im, idx) (ioport_t *)((uint)&(im)->im_ioport + ((idx)*0x20))
wdenk42d1f032003-10-15 23:53:47 +000032#endif
wdenk0f89ba42000-11-16 20:23:11 +000033
34/*
35 * this structure provides configuration
36 * information for one port pin
37 */
38typedef struct {
39 unsigned char conf:1; /* if 1, configure this port */
40 unsigned char ppar:1; /* Port Pin Assignment Register (35-4) */
41 unsigned char psor:1; /* Port Special Options Register (35-2) */
42 unsigned char pdir:1; /* Port Data Direction Register (35-3) */
43 unsigned char podr:1; /* Port Open Drain Register (35-2) */
44 unsigned char pdat:1; /* Port Data Register (35-2) */
45} iop_conf_t;
46
47/*
48 * a table that contains configuration information for all 32 pins
49 * of all four MPC8260 I/O ports.
50 *
51 * NOTE: in the second dimension of this table, index 0 refers to pin 31
52 * and index 31 refers to pin 0. this made the code in the table look more
53 * like the table in the 8260UM (and in the hymod manuals).
54 */
55extern const iop_conf_t iop_conf_tab[4][32];
Dave Liu7737d5c2006-11-03 12:11:15 -060056
57typedef struct {
58 unsigned char port;
59 unsigned char pin;
60 int dir;
61 int open_drain;
62 int assign;
63} qe_iop_conf_t;
64
65#define QE_IOP_TAB_END (-1)