Dario Binacchi | 35ab1b6 | 2020-12-30 00:16:30 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright (C) 2020 Dario Binacchi <dariobin@libero.it> |
| 4 | */ |
| 5 | |
| 6 | #include <common.h> |
| 7 | #include <clk.h> |
| 8 | #include <dm.h> |
| 9 | #include <dm/device_compat.h> |
| 10 | #include <lcd.h> |
| 11 | #include <log.h> |
| 12 | #include <panel.h> |
| 13 | #include <video.h> |
| 14 | #include <asm/io.h> |
| 15 | #include <asm/utils.h> |
| 16 | #include "tilcdc.h" |
| 17 | #include "tilcdc-panel.h" |
| 18 | |
| 19 | #define LCDC_FMAX 200000000 |
| 20 | |
| 21 | /* LCD Control Register */ |
| 22 | #define LCDC_CTRL_CLK_DIVISOR_MASK GENMASK(15, 8) |
| 23 | #define LCDC_CTRL_RASTER_MODE BIT(0) |
| 24 | #define LCDC_CTRL_CLK_DIVISOR(x) (((x) & GENMASK(7, 0)) << 8) |
| 25 | /* LCD Clock Enable Register */ |
| 26 | #define LCDC_CLKC_ENABLE_CORECLKEN BIT(0) |
| 27 | #define LCDC_CLKC_ENABLE_LIDDCLKEN BIT(1) |
| 28 | #define LCDC_CLKC_ENABLE_DMACLKEN BIT(2) |
| 29 | /* LCD DMA Control Register */ |
| 30 | #define LCDC_DMA_CTRL_BURST_SIZE(x) (((x) & GENMASK(2, 0)) << 4) |
| 31 | #define LCDC_DMA_CTRL_BURST_1 0x0 |
| 32 | #define LCDC_DMA_CTRL_BURST_2 0x1 |
| 33 | #define LCDC_DMA_CTRL_BURST_4 0x2 |
| 34 | #define LCDC_DMA_CTRL_BURST_8 0x3 |
| 35 | #define LCDC_DMA_CTRL_BURST_16 0x4 |
| 36 | #define LCDC_DMA_CTRL_FIFO_TH(x) (((x) & GENMASK(2, 0)) << 8) |
| 37 | /* LCD Timing_0 Register */ |
| 38 | #define LCDC_RASTER_TIMING_0_HORMSB(x) ((((x) - 1) & BIT(10)) >> 7) |
| 39 | #define LCDC_RASTER_TIMING_0_HORLSB(x) (((((x) >> 4) - 1) & GENMASK(5, 0)) << 4) |
| 40 | #define LCDC_RASTER_TIMING_0_HSWLSB(x) ((((x) - 1) & GENMASK(5, 0)) << 10) |
| 41 | #define LCDC_RASTER_TIMING_0_HFPLSB(x) ((((x) - 1) & GENMASK(7, 0)) << 16) |
| 42 | #define LCDC_RASTER_TIMING_0_HBPLSB(x) ((((x) - 1) & GENMASK(7, 0)) << 24) |
| 43 | /* LCD Timing_1 Register */ |
| 44 | #define LCDC_RASTER_TIMING_1_VERLSB(x) (((x) - 1) & GENMASK(9, 0)) |
| 45 | #define LCDC_RASTER_TIMING_1_VSW(x) ((((x) - 1) & GENMASK(5, 0)) << 10) |
| 46 | #define LCDC_RASTER_TIMING_1_VFP(x) (((x) & GENMASK(7, 0)) << 16) |
| 47 | #define LCDC_RASTER_TIMING_1_VBP(x) (((x) & GENMASK(7, 0)) << 24) |
| 48 | /* LCD Timing_2 Register */ |
| 49 | #define LCDC_RASTER_TIMING_2_HFPMSB(x) ((((x) - 1) & GENMASK(9, 8)) >> 8) |
| 50 | #define LCDC_RASTER_TIMING_2_HBPMSB(x) ((((x) - 1) & GENMASK(9, 8)) >> 4) |
| 51 | #define LCDC_RASTER_TIMING_2_ACB(x) (((x) & GENMASK(7, 0)) << 8) |
| 52 | #define LCDC_RASTER_TIMING_2_ACBI(x) (((x) & GENMASK(3, 0)) << 16) |
| 53 | #define LCDC_RASTER_TIMING_2_VSYNC_INVERT BIT(20) |
| 54 | #define LCDC_RASTER_TIMING_2_HSYNC_INVERT BIT(21) |
| 55 | #define LCDC_RASTER_TIMING_2_PXCLK_INVERT BIT(22) |
| 56 | #define LCDC_RASTER_TIMING_2_DE_INVERT BIT(23) |
| 57 | #define LCDC_RASTER_TIMING_2_HSVS_RISEFALL BIT(24) |
| 58 | #define LCDC_RASTER_TIMING_2_HSVS_CONTROL BIT(25) |
| 59 | #define LCDC_RASTER_TIMING_2_VERMSB(x) ((((x) - 1) & BIT(10)) << 16) |
| 60 | #define LCDC_RASTER_TIMING_2_HSWMSB(x) ((((x) - 1) & GENMASK(9, 6)) << 21) |
| 61 | /* LCD Raster Ctrl Register */ |
| 62 | #define LCDC_RASTER_CTRL_ENABLE BIT(0) |
| 63 | #define LCDC_RASTER_CTRL_TFT_MODE BIT(7) |
| 64 | #define LCDC_RASTER_CTRL_DATA_ORDER BIT(8) |
| 65 | #define LCDC_RASTER_CTRL_REQDLY(x) (((x) & GENMASK(7, 0)) << 12) |
| 66 | #define LCDC_RASTER_CTRL_PALMODE_RAWDATA (0x02 << 20) |
| 67 | #define LCDC_RASTER_CTRL_TFT_ALT_ENABLE BIT(23) |
| 68 | #define LCDC_RASTER_CTRL_TFT_24BPP_MODE BIT(25) |
| 69 | #define LCDC_RASTER_CTRL_TFT_24BPP_UNPACK BIT(26) |
| 70 | |
| 71 | enum { |
| 72 | LCDC_MAX_WIDTH = 2048, |
| 73 | LCDC_MAX_HEIGHT = 2048, |
| 74 | LCDC_MAX_LOG2_BPP = VIDEO_BPP32, |
| 75 | }; |
| 76 | |
| 77 | struct tilcdc_regs { |
| 78 | u32 pid; |
| 79 | u32 ctrl; |
| 80 | u32 gap0; |
| 81 | u32 lidd_ctrl; |
| 82 | u32 lidd_cs0_conf; |
| 83 | u32 lidd_cs0_addr; |
| 84 | u32 lidd_cs0_data; |
| 85 | u32 lidd_cs1_conf; |
| 86 | u32 lidd_cs1_addr; |
| 87 | u32 lidd_cs1_data; |
| 88 | u32 raster_ctrl; |
| 89 | u32 raster_timing0; |
| 90 | u32 raster_timing1; |
| 91 | u32 raster_timing2; |
| 92 | u32 raster_subpanel; |
| 93 | u32 raster_subpanel2; |
| 94 | u32 lcddma_ctrl; |
| 95 | u32 lcddma_fb0_base; |
| 96 | u32 lcddma_fb0_ceiling; |
| 97 | u32 lcddma_fb1_base; |
| 98 | u32 lcddma_fb1_ceiling; |
| 99 | u32 sysconfig; |
| 100 | u32 irqstatus_raw; |
| 101 | u32 irqstatus; |
| 102 | u32 irqenable_set; |
| 103 | u32 irqenable_clear; |
| 104 | u32 gap1; |
| 105 | u32 clkc_enable; |
| 106 | u32 clkc_reset; |
| 107 | }; |
| 108 | |
| 109 | struct tilcdc_priv { |
| 110 | struct tilcdc_regs *regs; |
| 111 | struct clk gclk; |
| 112 | struct clk dpll_m2_clk; |
| 113 | }; |
| 114 | |
| 115 | DECLARE_GLOBAL_DATA_PTR; |
| 116 | |
| 117 | static ulong tilcdc_set_pixel_clk_rate(struct udevice *dev, ulong rate) |
| 118 | { |
| 119 | struct tilcdc_priv *priv = dev_get_priv(dev); |
| 120 | struct tilcdc_regs *regs = priv->regs; |
| 121 | ulong mult_rate, mult_round_rate, best_err, err; |
| 122 | u32 v; |
| 123 | int div, i; |
| 124 | |
| 125 | best_err = rate; |
| 126 | div = 0; |
| 127 | for (i = 2; i <= 255; i++) { |
| 128 | mult_rate = rate * i; |
| 129 | mult_round_rate = clk_round_rate(&priv->gclk, mult_rate); |
| 130 | if (IS_ERR_VALUE(mult_round_rate)) |
| 131 | return mult_round_rate; |
| 132 | |
| 133 | err = mult_rate - mult_round_rate; |
| 134 | if (err < best_err) { |
| 135 | best_err = err; |
| 136 | div = i; |
| 137 | if (err == 0) |
| 138 | break; |
| 139 | } |
| 140 | } |
| 141 | |
| 142 | if (div == 0) { |
| 143 | dev_err(dev, "failed to find a divisor\n"); |
| 144 | return -EFAULT; |
| 145 | } |
| 146 | |
| 147 | mult_rate = clk_set_rate(&priv->gclk, rate * div); |
| 148 | v = readl(®s->ctrl) & ~LCDC_CTRL_CLK_DIVISOR_MASK; |
| 149 | v |= LCDC_CTRL_CLK_DIVISOR(div); |
| 150 | writel(v, ®s->ctrl); |
| 151 | rate = mult_rate / div; |
| 152 | dev_dbg(dev, "rate=%ld, div=%d, err=%ld\n", rate, div, err); |
| 153 | return rate; |
| 154 | } |
| 155 | |
| 156 | static int tilcdc_remove(struct udevice *dev) |
| 157 | { |
Dario Binacchi | b0db69b | 2021-01-15 09:10:26 +0100 | [diff] [blame] | 158 | struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev); |
Dario Binacchi | 35ab1b6 | 2020-12-30 00:16:30 +0100 | [diff] [blame] | 159 | struct tilcdc_priv *priv = dev_get_priv(dev); |
| 160 | |
| 161 | uc_plat->base -= 0x20; |
| 162 | uc_plat->size += 0x20; |
| 163 | clk_release_all(&priv->gclk, 1); |
| 164 | clk_release_all(&priv->dpll_m2_clk, 1); |
| 165 | return 0; |
| 166 | } |
| 167 | |
| 168 | static int tilcdc_probe(struct udevice *dev) |
| 169 | { |
Dario Binacchi | b0db69b | 2021-01-15 09:10:26 +0100 | [diff] [blame] | 170 | struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev); |
Dario Binacchi | 35ab1b6 | 2020-12-30 00:16:30 +0100 | [diff] [blame] | 171 | struct video_priv *uc_priv = dev_get_uclass_priv(dev); |
| 172 | struct tilcdc_priv *priv = dev_get_priv(dev); |
| 173 | struct tilcdc_regs *regs = priv->regs; |
| 174 | struct udevice *panel, *clk_dev; |
| 175 | struct tilcdc_panel_info info; |
| 176 | struct display_timing timing; |
| 177 | ulong rate; |
| 178 | u32 reg; |
| 179 | int err; |
| 180 | |
| 181 | /* Before relocation we don't need to do anything */ |
| 182 | if (!(gd->flags & GD_FLG_RELOC)) |
| 183 | return 0; |
| 184 | |
| 185 | err = uclass_get_device(UCLASS_PANEL, 0, &panel); |
| 186 | if (err) { |
| 187 | dev_err(dev, "failed to get panel\n"); |
| 188 | return err; |
| 189 | } |
| 190 | |
| 191 | err = panel_get_display_timing(panel, &timing); |
| 192 | if (err) { |
| 193 | dev_err(dev, "failed to get display timing\n"); |
| 194 | return err; |
| 195 | } |
| 196 | |
| 197 | if (timing.pixelclock.typ > (LCDC_FMAX / 2)) { |
| 198 | dev_err(dev, "invalid display clock-frequency: %d Hz\n", |
| 199 | timing.pixelclock.typ); |
| 200 | return -EINVAL; |
| 201 | } |
| 202 | |
| 203 | if (timing.hactive.typ > LCDC_MAX_WIDTH) |
| 204 | timing.hactive.typ = LCDC_MAX_WIDTH; |
| 205 | |
| 206 | if (timing.vactive.typ > LCDC_MAX_HEIGHT) |
| 207 | timing.vactive.typ = LCDC_MAX_HEIGHT; |
| 208 | |
| 209 | err = tilcdc_panel_get_display_info(panel, &info); |
| 210 | if (err) { |
| 211 | dev_err(dev, "failed to get panel info\n"); |
| 212 | return err; |
| 213 | } |
| 214 | |
| 215 | switch (info.bpp) { |
| 216 | case 16: |
| 217 | case 24: |
| 218 | case 32: |
| 219 | break; |
| 220 | default: |
| 221 | dev_err(dev, "invalid seting, bpp: %d\n", info.bpp); |
| 222 | return -EINVAL; |
| 223 | } |
| 224 | |
| 225 | switch (info.dma_burst_sz) { |
| 226 | case 1: |
| 227 | case 2: |
| 228 | case 4: |
| 229 | case 8: |
| 230 | case 16: |
| 231 | break; |
| 232 | default: |
| 233 | dev_err(dev, "invalid setting, dma-burst-sz: %d\n", |
| 234 | info.dma_burst_sz); |
| 235 | return -EINVAL; |
| 236 | } |
| 237 | |
| 238 | err = uclass_get_device_by_name(UCLASS_CLK, "lcd_gclk@534", &clk_dev); |
| 239 | if (err) { |
| 240 | dev_err(dev, "failed to get lcd_gclk device\n"); |
| 241 | return err; |
| 242 | } |
| 243 | |
| 244 | err = clk_request(clk_dev, &priv->gclk); |
| 245 | if (err) { |
| 246 | dev_err(dev, "failed to get %s clock\n", clk_dev->name); |
| 247 | return err; |
| 248 | } |
| 249 | |
| 250 | rate = tilcdc_set_pixel_clk_rate(dev, timing.pixelclock.typ); |
| 251 | if (IS_ERR_VALUE(rate)) { |
| 252 | dev_err(dev, "failed to set pixel clock rate\n"); |
| 253 | return rate; |
| 254 | } |
| 255 | |
| 256 | err = uclass_get_device_by_name(UCLASS_CLK, "dpll_disp_m2_ck@4a4", |
| 257 | &clk_dev); |
| 258 | if (err) { |
| 259 | dev_err(dev, "failed to get dpll_disp_m2 clock device\n"); |
| 260 | return err; |
| 261 | } |
| 262 | |
| 263 | err = clk_request(clk_dev, &priv->dpll_m2_clk); |
| 264 | if (err) { |
| 265 | dev_err(dev, "failed to get %s clock\n", clk_dev->name); |
| 266 | return err; |
| 267 | } |
| 268 | |
| 269 | err = clk_set_parent(&priv->gclk, &priv->dpll_m2_clk); |
| 270 | if (err) { |
| 271 | dev_err(dev, "failed to set %s clock as %s's parent\n", |
| 272 | priv->dpll_m2_clk.dev->name, priv->gclk.dev->name); |
| 273 | return err; |
| 274 | } |
| 275 | |
| 276 | /* palette default entry */ |
| 277 | memset((void *)uc_plat->base, 0, 0x20); |
| 278 | *(unsigned int *)uc_plat->base = 0x4000; |
| 279 | /* point fb behind palette */ |
| 280 | uc_plat->base += 0x20; |
| 281 | uc_plat->size -= 0x20; |
| 282 | |
| 283 | writel(LCDC_CLKC_ENABLE_CORECLKEN | LCDC_CLKC_ENABLE_LIDDCLKEN | |
| 284 | LCDC_CLKC_ENABLE_DMACLKEN, ®s->clkc_enable); |
| 285 | writel(0, ®s->raster_ctrl); |
| 286 | |
| 287 | reg = readl(®s->ctrl) & LCDC_CTRL_CLK_DIVISOR_MASK; |
| 288 | reg |= LCDC_CTRL_RASTER_MODE; |
| 289 | writel(reg, ®s->ctrl); |
| 290 | |
| 291 | reg = (timing.hactive.typ * timing.vactive.typ * info.bpp) >> 3; |
| 292 | reg += uc_plat->base; |
| 293 | writel(uc_plat->base, ®s->lcddma_fb0_base); |
| 294 | writel(reg, ®s->lcddma_fb0_ceiling); |
| 295 | writel(uc_plat->base, ®s->lcddma_fb1_base); |
| 296 | writel(reg, ®s->lcddma_fb1_ceiling); |
| 297 | |
| 298 | reg = LCDC_DMA_CTRL_FIFO_TH(info.fifo_th); |
| 299 | switch (info.dma_burst_sz) { |
| 300 | case 1: |
| 301 | reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_1); |
| 302 | break; |
| 303 | case 2: |
| 304 | reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_2); |
| 305 | break; |
| 306 | case 4: |
| 307 | reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_4); |
| 308 | break; |
| 309 | case 8: |
| 310 | reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_8); |
| 311 | break; |
| 312 | case 16: |
| 313 | reg |= LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_16); |
| 314 | break; |
| 315 | } |
| 316 | |
| 317 | writel(reg, ®s->lcddma_ctrl); |
| 318 | |
| 319 | writel(LCDC_RASTER_TIMING_0_HORLSB(timing.hactive.typ) | |
| 320 | LCDC_RASTER_TIMING_0_HORMSB(timing.hactive.typ) | |
| 321 | LCDC_RASTER_TIMING_0_HFPLSB(timing.hfront_porch.typ) | |
| 322 | LCDC_RASTER_TIMING_0_HBPLSB(timing.hback_porch.typ) | |
| 323 | LCDC_RASTER_TIMING_0_HSWLSB(timing.hsync_len.typ), |
| 324 | ®s->raster_timing0); |
| 325 | |
| 326 | writel(LCDC_RASTER_TIMING_1_VBP(timing.vback_porch.typ) | |
| 327 | LCDC_RASTER_TIMING_1_VFP(timing.vfront_porch.typ) | |
| 328 | LCDC_RASTER_TIMING_1_VSW(timing.vsync_len.typ) | |
| 329 | LCDC_RASTER_TIMING_1_VERLSB(timing.vactive.typ), |
| 330 | ®s->raster_timing1); |
| 331 | |
| 332 | reg = LCDC_RASTER_TIMING_2_ACB(info.ac_bias) | |
| 333 | LCDC_RASTER_TIMING_2_ACBI(info.ac_bias_intrpt) | |
| 334 | LCDC_RASTER_TIMING_2_HSWMSB(timing.hsync_len.typ) | |
| 335 | LCDC_RASTER_TIMING_2_VERMSB(timing.vactive.typ) | |
| 336 | LCDC_RASTER_TIMING_2_HBPMSB(timing.hback_porch.typ) | |
| 337 | LCDC_RASTER_TIMING_2_HFPMSB(timing.hfront_porch.typ); |
| 338 | |
| 339 | if (timing.flags & DISPLAY_FLAGS_VSYNC_LOW) |
| 340 | reg |= LCDC_RASTER_TIMING_2_VSYNC_INVERT; |
| 341 | |
| 342 | if (timing.flags & DISPLAY_FLAGS_HSYNC_LOW) |
| 343 | reg |= LCDC_RASTER_TIMING_2_HSYNC_INVERT; |
| 344 | |
| 345 | if (info.invert_pxl_clk) |
| 346 | reg |= LCDC_RASTER_TIMING_2_PXCLK_INVERT; |
| 347 | |
| 348 | if (info.sync_edge) |
| 349 | reg |= LCDC_RASTER_TIMING_2_HSVS_RISEFALL; |
| 350 | |
| 351 | if (info.sync_ctrl) |
| 352 | reg |= LCDC_RASTER_TIMING_2_HSVS_CONTROL; |
| 353 | |
| 354 | writel(reg, ®s->raster_timing2); |
| 355 | |
| 356 | reg = LCDC_RASTER_CTRL_PALMODE_RAWDATA | LCDC_RASTER_CTRL_TFT_MODE | |
| 357 | LCDC_RASTER_CTRL_ENABLE | LCDC_RASTER_CTRL_REQDLY(info.fdd); |
| 358 | |
| 359 | if (info.tft_alt_mode) |
| 360 | reg |= LCDC_RASTER_CTRL_TFT_ALT_ENABLE; |
| 361 | |
| 362 | if (info.bpp == 24) |
| 363 | reg |= LCDC_RASTER_CTRL_TFT_24BPP_MODE; |
| 364 | else if (info.bpp == 32) |
| 365 | reg |= LCDC_RASTER_CTRL_TFT_24BPP_MODE | |
| 366 | LCDC_RASTER_CTRL_TFT_24BPP_UNPACK; |
| 367 | |
| 368 | if (info.raster_order) |
| 369 | reg |= LCDC_RASTER_CTRL_DATA_ORDER; |
| 370 | |
| 371 | writel(reg, ®s->raster_ctrl); |
| 372 | |
| 373 | uc_priv->xsize = timing.hactive.typ; |
| 374 | uc_priv->ysize = timing.vactive.typ; |
| 375 | uc_priv->bpix = log_2_n_round_up(info.bpp); |
| 376 | |
| 377 | err = panel_enable_backlight(panel); |
| 378 | if (err) { |
| 379 | dev_err(dev, "failed to enable panel backlight\n"); |
| 380 | return err; |
| 381 | } |
| 382 | |
| 383 | return 0; |
| 384 | } |
| 385 | |
| 386 | static int tilcdc_of_to_plat(struct udevice *dev) |
| 387 | { |
| 388 | struct tilcdc_priv *priv = dev_get_priv(dev); |
| 389 | |
| 390 | priv->regs = (struct tilcdc_regs *)dev_read_addr(dev); |
| 391 | if ((fdt_addr_t)priv->regs == FDT_ADDR_T_NONE) { |
| 392 | dev_err(dev, "failed to get base address\n"); |
| 393 | return -EINVAL; |
| 394 | } |
| 395 | |
| 396 | dev_dbg(dev, "LCD: base address=0x%x\n", (unsigned int)priv->regs); |
| 397 | return 0; |
| 398 | } |
| 399 | |
| 400 | static int tilcdc_bind(struct udevice *dev) |
| 401 | { |
Dario Binacchi | b0db69b | 2021-01-15 09:10:26 +0100 | [diff] [blame] | 402 | struct video_uc_plat *uc_plat = dev_get_uclass_plat(dev); |
Dario Binacchi | 35ab1b6 | 2020-12-30 00:16:30 +0100 | [diff] [blame] | 403 | |
| 404 | uc_plat->size = ((LCDC_MAX_WIDTH * LCDC_MAX_HEIGHT * |
| 405 | (1 << LCDC_MAX_LOG2_BPP)) >> 3) + 0x20; |
| 406 | |
| 407 | dev_dbg(dev, "frame buffer size 0x%x\n", uc_plat->size); |
| 408 | return 0; |
| 409 | } |
| 410 | |
| 411 | static const struct udevice_id tilcdc_ids[] = { |
| 412 | {.compatible = "ti,am33xx-tilcdc"}, |
| 413 | {} |
| 414 | }; |
| 415 | |
| 416 | U_BOOT_DRIVER(tilcdc) = { |
| 417 | .name = "tilcdc", |
| 418 | .id = UCLASS_VIDEO, |
| 419 | .of_match = tilcdc_ids, |
| 420 | .bind = tilcdc_bind, |
Dario Binacchi | b0db69b | 2021-01-15 09:10:26 +0100 | [diff] [blame] | 421 | .of_to_plat = tilcdc_of_to_plat, |
Dario Binacchi | 35ab1b6 | 2020-12-30 00:16:30 +0100 | [diff] [blame] | 422 | .probe = tilcdc_probe, |
| 423 | .remove = tilcdc_remove, |
| 424 | .priv_auto = sizeof(struct tilcdc_priv) |
| 425 | }; |