include/div64.h

#ifndef _ASM_GENERIC_DIV64_H
#define _ASM_GENERIC_DIV64_H
/*
 * Copyright (C) 2003 Bernardo Innocenti <bernie@develer.com>
 * Based on former asm-ppc/div64.h and asm-m68knommu/div64.h
 *
 * Optimization for constant divisors on 32-bit machines:
 * Copyright (C) 2006-2015 Nicolas Pitre
 *
 * The semantics of do_div() are:
 *
 * uint32_t do_div(uint64_t *n, uint32_t base)
 * {
 * 	uint32_t remainder = *n % base;
 * 	*n = *n / base;
 * 	return remainder;
 * }
 *
 * NOTE: macro parameter n is evaluated multiple times,
 *       beware of side effects!
 */

#include <linux/types.h>
#include <linux/compiler.h>

#if BITS_PER_LONG == 64

# define do_div(n,base) ({					\
	uint32_t __base = (base);				\
	uint32_t __rem;						\
	__rem = ((uint64_t)(n)) % __base;			\
	(n) = ((uint64_t)(n)) / __base;				\
	__rem;							\
 })

#elif BITS_PER_LONG == 32

#include <linux/log2.h>

/*
 * If the divisor happens to be constant, we determine the appropriate
 * inverse at compile time to turn the division into a few inline
 * multiplications which ought to be much faster. And yet only if compiling
 * with a sufficiently recent gcc version to perform proper 64-bit constant
 * propagation.
 *
 * (It is unfortunate that gcc doesn't perform all this internally.)
 */

#ifndef __div64_const32_is_OK
#define __div64_const32_is_OK (__GNUC__ >= 4)
#endif

#define __div64_const32(n, ___b)					\
({									\
	/*								\
	 * Multiplication by reciprocal of b: n / b = n * (p / b) / p	\
	 *								\
	 * We rely on the fact that most of this code gets optimized	\
	 * away at compile time due to constant propagation and only	\
	 * a few multiplication instructions should remain.		\
	 * Hence this monstrous macro (static inline doesn't always	\
	 * do the trick here).						\
	 */								\
	uint64_t ___res, ___x, ___t, ___m, ___n = (n);			\
	uint32_t ___p, ___bias;						\
									\
	/* determine MSB of b */					\
	___p = 1 << ilog2(___b);					\
									\
	/* compute m = ((p << 64) + b - 1) / b */			\
	___m = (~0ULL / ___b) * ___p;					\
	___m += (((~0ULL % ___b + 1) * ___p) + ___b - 1) / ___b;	\
									\
	/* one less than the dividend with highest result */		\
	___x = ~0ULL / ___b * ___b - 1;					\
									\
	/* test our ___m with res = m * x / (p << 64) */		\
	___res = ((___m & 0xffffffff) * (___x & 0xffffffff)) >> 32;	\
	___t = ___res += (___m & 0xffffffff) * (___x >> 32);		\
	___res += (___x & 0xffffffff) * (___m >> 32);			\
	___t = (___res < ___t) ? (1ULL << 32) : 0;			\
	___res = (___res >> 32) + ___t;					\
	___res += (___m >> 32) * (___x >> 32);				\
	___res /= ___p;							\
									\
	/* Now sanitize and optimize what we've got. */			\
	if (~0ULL % (___b / (___b & -___b)) == 0) {			\
		/* special case, can be simplified to ... */		\
		___n /= (___b & -___b);					\
		___m = ~0ULL / (___b / (___b & -___b));			\
		___p = 1;						\
		___bias = 1;						\
	} else if (___res != ___x / ___b) {				\
		/*							\
		 * We can't get away without a bias to compensate	\
		 * for bit truncation errors.  To avoid it we'd need an	\
		 * additional bit to represent m which would overflow	\
		 * a 64-bit variable.					\
		 *							\
		 * Instead we do m = p / b and n / b = (n * m + m) / p.	\
		 */							\
		___bias = 1;						\
		/* Compute m = (p << 64) / b */				\
		___m = (~0ULL / ___b) * ___p;				\
		___m += ((~0ULL % ___b + 1) * ___p) / ___b;		\
	} else {							\
		/*							\
		 * Reduce m / p, and try to clear bit 31 of m when	\
		 * possible, otherwise that'll need extra overflow	\
		 * handling later.					\
		 */							\
		uint32_t ___bits = -(___m & -___m);			\
		___bits |= ___m >> 32;					\
		___bits = (~___bits) << 1;				\
		/*							\
		 * If ___bits == 0 then setting bit 31 is  unavoidable.	\
		 * Simply apply the maximum possible reduction in that	\
		 * case. Otherwise the MSB of ___bits indicates the	\
		 * best reduction we should apply.			\
		 */							\
		if (!___bits) {						\
			___p /= (___m & -___m);				\
			___m /= (___m & -___m);				\
		} else {						\
			___p >>= ilog2(___bits);			\
			___m >>= ilog2(___bits);			\
		}							\
		/* No bias needed. */					\
		___bias = 0;						\
	}								\
									\
	/*								\
	 * Now we have a combination of 2 conditions:			\
	 *								\
	 * 1) whether or not we need to apply a bias, and		\
	 *								\
	 * 2) whether or not there might be an overflow in the cross	\
	 *    product determined by (___m & ((1 << 63) | (1 << 31))).	\
	 *								\
	 * Select the best way to do (m_bias + m * n) / (1 << 64).	\
	 * From now on there will be actual runtime code generated.	\
	 */								\
	___res = __arch_xprod_64(___m, ___n, ___bias);			\
									\
	___res /= ___p;							\
})

#ifndef __arch_xprod_64
/*
 * Default C implementation for __arch_xprod_64()
 *
 * Prototype: uint64_t __arch_xprod_64(const uint64_t m, uint64_t n, bool bias)
 * Semantic:  retval = ((bias ? m : 0) + m * n) >> 64
 *
 * The product is a 128-bit value, scaled down to 64 bits.
 * Assuming constant propagation to optimize away unused conditional code.
 * Architectures may provide their own optimized assembly implementation.
 */
static inline uint64_t __arch_xprod_64(const uint64_t m, uint64_t n, bool bias)
{
	uint32_t m_lo = m;
	uint32_t m_hi = m >> 32;
	uint32_t n_lo = n;
	uint32_t n_hi = n >> 32;
	uint64_t res, tmp;

	if (!bias) {
		res = ((uint64_t)m_lo * n_lo) >> 32;
	} else if (!(m & ((1ULL << 63) | (1ULL << 31)))) {
		/* there can't be any overflow here */
		res = (m + (uint64_t)m_lo * n_lo) >> 32;
	} else {
		res = m + (uint64_t)m_lo * n_lo;
		tmp = (res < m) ? (1ULL << 32) : 0;
		res = (res >> 32) + tmp;
	}

	if (!(m & ((1ULL << 63) | (1ULL << 31)))) {
		/* there can't be any overflow here */
		res += (uint64_t)m_lo * n_hi;
		res += (uint64_t)m_hi * n_lo;
		res >>= 32;
	} else {
		tmp = res += (uint64_t)m_lo * n_hi;
		res += (uint64_t)m_hi * n_lo;
		tmp = (res < tmp) ? (1ULL << 32) : 0;
		res = (res >> 32) + tmp;
	}

	res += (uint64_t)m_hi * n_hi;

	return res;
}
#endif

#ifndef __div64_32
extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
#endif

/* The unnecessary pointer compare is there
 * to check for type safety (n must be 64bit)
 */
# define do_div(n,base) ({				\
	uint32_t __base = (base);			\
	uint32_t __rem;					\
	(void)(((typeof((n)) *)0) == ((uint64_t *)0));	\
	if (__builtin_constant_p(__base) &&		\
	    is_power_of_2(__base)) {			\
		__rem = (n) & (__base - 1);		\
		(n) >>= ilog2(__base);			\
	} else if (__div64_const32_is_OK &&		\
		   __builtin_constant_p(__base) &&	\
		   __base != 0) {			\
		uint32_t __res_lo, __n_lo = (n);	\
		(n) = __div64_const32(n, __base);	\
		/* the remainder can be computed with 32-bit regs */ \
		__res_lo = (n);				\
		__rem = __n_lo - __res_lo * __base;	\
	} else if (likely(((n) >> 32) == 0)) {		\
		__rem = (uint32_t)(n) % __base;		\
		(n) = (uint32_t)(n) / __base;		\
	} else 						\
		__rem = __div64_32(&(n), __base);	\
	__rem;						\
 })

#else /* BITS_PER_LONG == ?? */

# error do_div() does not yet support the C64

#endif /* BITS_PER_LONG */

/* Wrapper for do_div(). Doesn't modify dividend and returns
 * the result, not reminder.
 */
static inline uint64_t lldiv(uint64_t dividend, uint32_t divisor)
{
	uint64_t __res = dividend;
	do_div(__res, divisor);
	return(__res);
}

#endif /* _ASM_GENERIC_DIV64_H */