blob: 83bb7c222c63687743e935df91949fec99f7c325 [file] [log] [blame]
wdenk4a551702003-10-08 23:26:14 +00001/*
wdenkc935d3b2004-01-03 19:43:48 +00002 * (C) Copyright 2000-2004
wdenk4a551702003-10-08 23:26:14 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24
25#include <common.h>
26#include <nios.h>
27
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020028flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
wdenk4a551702003-10-08 23:26:14 +000029
wdenk4a551702003-10-08 23:26:14 +000030/*--------------------------------------------------------------------*/
31void flash_print_info (flash_info_t * info)
32{
33 int i, k;
34 unsigned long size;
35 int erased;
36 volatile unsigned char *flash;
37
38 printf (" Size: %ld KB in %d Sectors\n",
39 info->size >> 10, info->sector_count);
40 printf (" Sector Start Addresses:");
41 for (i = 0; i < info->sector_count; ++i) {
42
43 /* Check if whole sector is erased */
44 if (i != (info->sector_count - 1))
45 size = info->start[i + 1] - info->start[i];
46 else
47 size = info->start[0] + info->size - info->start[i];
48 erased = 1;
49 flash = (volatile unsigned char *) info->start[i];
50 for (k = 0; k < size; k++) {
51 if (*flash++ != 0xff) {
52 erased = 0;
53 break;
54 }
55 }
56
57 /* Print the info */
58 if ((i % 5) == 0)
59 printf ("\n ");
60 printf (" %08lX%s%s", info->start[i], erased ? " E" : " ",
61 info->protect[i] ? "RO " : " ");
62 }
63 printf ("\n");
64}
65
66/*-------------------------------------------------------------------*/
67
68
69int flash_erase (flash_info_t * info, int s_first, int s_last)
70{
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020071 volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
72 volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
wdenk4a551702003-10-08 23:26:14 +000073 int prot, sect;
wdenk4a551702003-10-08 23:26:14 +000074 unsigned oldpri;
75 ulong start;
76
77 /* Some sanity checking */
78 if ((s_first < 0) || (s_first > s_last)) {
79 printf ("- no sectors to erase\n");
80 return 1;
81 }
82
83 prot = 0;
84 for (sect = s_first; sect <= s_last; ++sect) {
85 if (info->protect[sect]) {
86 prot++;
87 }
88 }
89 if (prot) {
90 printf ("- Warning: %d protected sectors will not be erased!\n",
91 prot);
92 } else {
93 printf ("\n");
94 }
95
wdenkec4c5442004-02-09 23:12:24 +000096#ifdef DEBUG
97 for (sect = s_first; sect <= s_last; sect++) {
98 printf("- Erase: Sect: %i @ 0x%08x\n", sect, info->start[sect]);
99 }
100#endif
101
wdenk4a551702003-10-08 23:26:14 +0000102 /* NOTE: disabling interrupts on Nios can be very bad since it
103 * also disables the LO_LIMIT exception. It's better here to
104 * set the interrupt priority to 3 & restore it when we're done.
105 */
106 oldpri = ipri (3);
107
108 /* It's ok to erase multiple sectors provided we don't delay more
109 * than 50 usec between cmds ... at which point the erase time-out
110 * occurs. So don't go and put printf() calls in the loop ... it
111 * won't be very helpful ;-)
112 */
113 for (sect = s_first; sect <= s_last; sect++) {
114 if (info->protect[sect] == 0) { /* not protected */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200115 addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
wdenk4a551702003-10-08 23:26:14 +0000116 *addr = 0xaa;
117 *addr = 0x55;
118 *addr = 0x80;
119 *addr = 0xaa;
120 *addr = 0x55;
121 *addr2 = 0x30;
wdenkec4c5442004-02-09 23:12:24 +0000122 /* Now just wait for 0xff & provide some user
123 * feedback while we wait. Here we have to grant
124 * timer interrupts. Otherwise get_timer() can't
125 * work right. */
126 ipri(oldpri);
127 start = get_timer (0);
128 while (*addr2 != 0xff) {
129 udelay (1000 * 1000);
130 putc ('.');
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200131 if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
wdenkec4c5442004-02-09 23:12:24 +0000132 printf ("timeout\n");
133 return 1;
134 }
135 }
136 oldpri = ipri (3); /* disallow non important irqs again */
wdenk4a551702003-10-08 23:26:14 +0000137 }
138 }
139
wdenkec4c5442004-02-09 23:12:24 +0000140 printf ("\n");
wdenk4a551702003-10-08 23:26:14 +0000141
142 /* Restore interrupt priority */
143 ipri (oldpri);
144
145 return 0;
146}
147
148/*-----------------------------------------------------------------------
149 * Copy memory to flash, returns:
150 * 0 - OK
151 * 1 - write timeout
152 * 2 - Flash not erased
153 */
154
155int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
156{
157
158 vu_char *cmd = (vu_char *) info->start[0];
159 vu_char *dst = (vu_char *) addr;
160 unsigned char b;
161 unsigned oldpri;
162 ulong start;
163
164 while (cnt) {
165 /* Check for sufficient erase */
166 b = *src;
167 if ((*dst & b) != b) {
168 printf ("%02x : %02x\n", *dst, b);
169 return (2);
170 }
171
172 /* Disable interrupts other than window underflow
173 * (interrupt priority 2)
174 */
175 oldpri = ipri (3);
176 *cmd = 0xaa;
177 *cmd = 0x55;
178 *cmd = 0xa0;
179 *dst = b;
180
181 /* Verify write */
182 start = get_timer (0);
183 while (*dst != b) {
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200184 if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
wdenk4a551702003-10-08 23:26:14 +0000185 ipri (oldpri);
186 return 1;
187 }
188 }
189 dst++;
190 src++;
191 cnt--;
192 ipri (oldpri);
193 }
194
195 return (0);
196}