Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
Yuiko Oshino | d2c3197 | 2017-08-11 12:44:58 -0400 | [diff] [blame] | 2 | /* |
| 3 | * Copyright (c) 2017 Microchip Technology Inc. All rights reserved. |
Yuiko Oshino | d2c3197 | 2017-08-11 12:44:58 -0400 | [diff] [blame] | 4 | */ |
| 5 | |
| 6 | #include <dm.h> |
Simon Glass | f7ae49f | 2020-05-10 11:40:05 -0600 | [diff] [blame] | 7 | #include <log.h> |
Simon Glass | 90526e9 | 2020-05-10 11:39:56 -0600 | [diff] [blame] | 8 | #include <net.h> |
Yuiko Oshino | d2c3197 | 2017-08-11 12:44:58 -0400 | [diff] [blame] | 9 | #include <usb.h> |
Simon Glass | cd93d62 | 2020-05-10 11:40:13 -0600 | [diff] [blame] | 10 | #include <linux/bitops.h> |
Yuiko Oshino | d2c3197 | 2017-08-11 12:44:58 -0400 | [diff] [blame] | 11 | #include "usb_ether.h" |
| 12 | #include "lan7x.h" |
| 13 | |
| 14 | /* LAN78xx specific register/bit defines */ |
| 15 | #define LAN78XX_HW_CFG_LED1_EN BIT(21) /* Muxed with EEDO */ |
| 16 | #define LAN78XX_HW_CFG_LED0_EN BIT(20) /* Muxed with EECLK */ |
| 17 | |
| 18 | #define LAN78XX_USB_CFG0 0x080 |
| 19 | #define LAN78XX_USB_CFG0_BIR BIT(6) |
| 20 | |
| 21 | #define LAN78XX_BURST_CAP 0x090 |
| 22 | |
| 23 | #define LAN78XX_BULK_IN_DLY 0x094 |
| 24 | |
| 25 | #define LAN78XX_RFE_CTL 0x0B0 |
| 26 | |
| 27 | #define LAN78XX_FCT_RX_CTL 0x0C0 |
| 28 | |
| 29 | #define LAN78XX_FCT_TX_CTL 0x0C4 |
| 30 | |
| 31 | #define LAN78XX_FCT_RX_FIFO_END 0x0C8 |
| 32 | |
| 33 | #define LAN78XX_FCT_TX_FIFO_END 0x0CC |
| 34 | |
| 35 | #define LAN78XX_FCT_FLOW 0x0D0 |
| 36 | |
| 37 | #define LAN78XX_MAF_BASE 0x400 |
| 38 | #define LAN78XX_MAF_HIX 0x00 |
| 39 | #define LAN78XX_MAF_LOX 0x04 |
| 40 | #define LAN78XX_MAF_HI_BEGIN (LAN78XX_MAF_BASE + LAN78XX_MAF_HIX) |
| 41 | #define LAN78XX_MAF_LO_BEGIN (LAN78XX_MAF_BASE + LAN78XX_MAF_LOX) |
| 42 | #define LAN78XX_MAF_HI(index) (LAN78XX_MAF_BASE + (8 * (index)) + \ |
| 43 | LAN78XX_MAF_HIX) |
| 44 | #define LAN78XX_MAF_LO(index) (LAN78XX_MAF_BASE + (8 * (index)) + \ |
| 45 | LAN78XX_MAF_LOX) |
| 46 | #define LAN78XX_MAF_HI_VALID BIT(31) |
| 47 | |
| 48 | /* OTP registers */ |
| 49 | #define LAN78XX_OTP_BASE_ADDR 0x00001000 |
| 50 | |
| 51 | #define LAN78XX_OTP_PWR_DN (LAN78XX_OTP_BASE_ADDR + 4 * 0x00) |
| 52 | #define LAN78XX_OTP_PWR_DN_PWRDN_N BIT(0) |
| 53 | |
| 54 | #define LAN78XX_OTP_ADDR1 (LAN78XX_OTP_BASE_ADDR + 4 * 0x01) |
| 55 | #define LAN78XX_OTP_ADDR1_15_11 0x1F |
| 56 | |
| 57 | #define LAN78XX_OTP_ADDR2 (LAN78XX_OTP_BASE_ADDR + 4 * 0x02) |
| 58 | #define LAN78XX_OTP_ADDR2_10_3 0xFF |
| 59 | |
| 60 | #define LAN78XX_OTP_RD_DATA (LAN78XX_OTP_BASE_ADDR + 4 * 0x06) |
| 61 | |
| 62 | #define LAN78XX_OTP_FUNC_CMD (LAN78XX_OTP_BASE_ADDR + 4 * 0x08) |
| 63 | #define LAN78XX_OTP_FUNC_CMD_READ BIT(0) |
| 64 | |
| 65 | #define LAN78XX_OTP_CMD_GO (LAN78XX_OTP_BASE_ADDR + 4 * 0x0A) |
| 66 | #define LAN78XX_OTP_CMD_GO_GO BIT(0) |
| 67 | |
| 68 | #define LAN78XX_OTP_STATUS (LAN78XX_OTP_BASE_ADDR + 4 * 0x0C) |
| 69 | #define LAN78XX_OTP_STATUS_BUSY BIT(0) |
| 70 | |
| 71 | #define LAN78XX_OTP_INDICATOR_1 0xF3 |
| 72 | #define LAN78XX_OTP_INDICATOR_2 0xF7 |
| 73 | |
| 74 | /* |
| 75 | * Lan78xx infrastructure commands |
| 76 | */ |
| 77 | static int lan78xx_read_raw_otp(struct usb_device *udev, u32 offset, |
| 78 | u32 length, u8 *data) |
| 79 | { |
| 80 | int i; |
| 81 | int ret; |
| 82 | u32 buf; |
| 83 | |
| 84 | ret = lan7x_read_reg(udev, LAN78XX_OTP_PWR_DN, &buf); |
| 85 | if (ret) |
| 86 | return ret; |
| 87 | |
| 88 | if (buf & LAN78XX_OTP_PWR_DN_PWRDN_N) { |
| 89 | /* clear it and wait to be cleared */ |
| 90 | ret = lan7x_write_reg(udev, LAN78XX_OTP_PWR_DN, 0); |
| 91 | if (ret) |
| 92 | return ret; |
| 93 | |
| 94 | ret = lan7x_wait_for_bit(udev, "LAN78XX_OTP_PWR_DN_PWRDN_N", |
| 95 | LAN78XX_OTP_PWR_DN, |
| 96 | LAN78XX_OTP_PWR_DN_PWRDN_N, |
| 97 | false, 1000, 0); |
| 98 | if (ret) |
| 99 | return ret; |
| 100 | } |
| 101 | |
| 102 | for (i = 0; i < length; i++) { |
| 103 | ret = lan7x_write_reg(udev, LAN78XX_OTP_ADDR1, |
| 104 | ((offset + i) >> 8) & |
| 105 | LAN78XX_OTP_ADDR1_15_11); |
| 106 | if (ret) |
| 107 | return ret; |
| 108 | ret = lan7x_write_reg(udev, LAN78XX_OTP_ADDR2, |
| 109 | ((offset + i) & LAN78XX_OTP_ADDR2_10_3)); |
| 110 | if (ret) |
| 111 | return ret; |
| 112 | |
| 113 | ret = lan7x_write_reg(udev, LAN78XX_OTP_FUNC_CMD, |
| 114 | LAN78XX_OTP_FUNC_CMD_READ); |
| 115 | if (ret) |
| 116 | return ret; |
| 117 | ret = lan7x_write_reg(udev, LAN78XX_OTP_CMD_GO, |
| 118 | LAN78XX_OTP_CMD_GO_GO); |
| 119 | |
| 120 | if (ret) |
| 121 | return ret; |
| 122 | |
| 123 | ret = lan7x_wait_for_bit(udev, "LAN78XX_OTP_STATUS_BUSY", |
| 124 | LAN78XX_OTP_STATUS, |
| 125 | LAN78XX_OTP_STATUS_BUSY, |
| 126 | false, 1000, 0); |
| 127 | if (ret) |
| 128 | return ret; |
| 129 | |
| 130 | ret = lan7x_read_reg(udev, LAN78XX_OTP_RD_DATA, &buf); |
| 131 | if (ret) |
| 132 | return ret; |
| 133 | |
| 134 | data[i] = (u8)(buf & 0xFF); |
| 135 | } |
| 136 | |
| 137 | return 0; |
| 138 | } |
| 139 | |
| 140 | static int lan78xx_read_otp(struct usb_device *udev, u32 offset, |
| 141 | u32 length, u8 *data) |
| 142 | { |
| 143 | u8 sig; |
| 144 | int ret; |
| 145 | |
| 146 | ret = lan78xx_read_raw_otp(udev, 0, 1, &sig); |
| 147 | |
| 148 | if (!ret) { |
| 149 | if (sig == LAN78XX_OTP_INDICATOR_1) |
| 150 | offset = offset; |
| 151 | else if (sig == LAN78XX_OTP_INDICATOR_2) |
| 152 | offset += 0x100; |
| 153 | else |
| 154 | return -EINVAL; |
| 155 | ret = lan78xx_read_raw_otp(udev, offset, length, data); |
| 156 | if (ret) |
| 157 | return ret; |
| 158 | } |
| 159 | debug("LAN78x: MAC address from OTP = %pM\n", data); |
| 160 | |
| 161 | return ret; |
| 162 | } |
| 163 | |
| 164 | static int lan78xx_read_otp_mac(unsigned char *enetaddr, |
| 165 | struct usb_device *udev) |
| 166 | { |
| 167 | int ret; |
| 168 | |
| 169 | memset(enetaddr, 0, 6); |
| 170 | |
| 171 | ret = lan78xx_read_otp(udev, |
| 172 | EEPROM_MAC_OFFSET, |
| 173 | ETH_ALEN, |
| 174 | enetaddr); |
| 175 | if (!ret && is_valid_ethaddr(enetaddr)) { |
| 176 | /* eeprom values are valid so use them */ |
| 177 | debug("MAC address read from OTP %pM\n", enetaddr); |
| 178 | return 0; |
| 179 | } |
| 180 | debug("MAC address read from OTP invalid %pM\n", enetaddr); |
| 181 | |
| 182 | memset(enetaddr, 0, 6); |
| 183 | return -EINVAL; |
| 184 | } |
| 185 | |
| 186 | static int lan78xx_update_flowcontrol(struct usb_device *udev, |
| 187 | struct ueth_data *dev) |
| 188 | { |
| 189 | uint32_t flow = 0, fct_flow = 0; |
| 190 | int ret; |
| 191 | |
| 192 | ret = lan7x_update_flowcontrol(udev, dev, &flow, &fct_flow); |
| 193 | if (ret) |
| 194 | return ret; |
| 195 | |
| 196 | ret = lan7x_write_reg(udev, LAN78XX_FCT_FLOW, fct_flow); |
| 197 | if (ret) |
| 198 | return ret; |
| 199 | return lan7x_write_reg(udev, FLOW, flow); |
| 200 | } |
| 201 | |
| 202 | static int lan78xx_read_mac(unsigned char *enetaddr, |
| 203 | struct usb_device *udev, |
| 204 | struct lan7x_private *priv) |
| 205 | { |
| 206 | u32 val; |
| 207 | int ret; |
| 208 | int saved = 0, done = 0; |
| 209 | |
| 210 | /* |
| 211 | * Depends on chip, some EEPROM pins are muxed with LED function. |
| 212 | * disable & restore LED function to access EEPROM. |
| 213 | */ |
| 214 | if ((priv->chipid == ID_REV_CHIP_ID_7800) || |
| 215 | (priv->chipid == ID_REV_CHIP_ID_7850)) { |
| 216 | ret = lan7x_read_reg(udev, HW_CFG, &val); |
| 217 | if (ret) |
| 218 | return ret; |
| 219 | saved = val; |
| 220 | val &= ~(LAN78XX_HW_CFG_LED1_EN | LAN78XX_HW_CFG_LED0_EN); |
| 221 | ret = lan7x_write_reg(udev, HW_CFG, val); |
| 222 | if (ret) |
| 223 | goto restore; |
| 224 | } |
| 225 | |
| 226 | /* |
| 227 | * Refer to the doc/README.enetaddr and doc/README.usb for |
| 228 | * the U-Boot MAC address policy |
| 229 | */ |
| 230 | /* try reading mac address from EEPROM, then from OTP */ |
| 231 | ret = lan7x_read_eeprom_mac(enetaddr, udev); |
| 232 | if (!ret) |
| 233 | done = 1; |
| 234 | |
| 235 | restore: |
| 236 | if ((priv->chipid == ID_REV_CHIP_ID_7800) || |
| 237 | (priv->chipid == ID_REV_CHIP_ID_7850)) { |
| 238 | ret = lan7x_write_reg(udev, HW_CFG, saved); |
| 239 | if (ret) |
| 240 | return ret; |
| 241 | } |
| 242 | /* if the EEPROM mac address is good, then exit */ |
| 243 | if (done) |
| 244 | return 0; |
| 245 | |
| 246 | /* try reading mac address from OTP if the device is LAN78xx */ |
| 247 | return lan78xx_read_otp_mac(enetaddr, udev); |
| 248 | } |
| 249 | |
| 250 | static int lan78xx_set_receive_filter(struct usb_device *udev) |
| 251 | { |
| 252 | /* No multicast in u-boot for now */ |
| 253 | return lan7x_write_reg(udev, LAN78XX_RFE_CTL, |
| 254 | RFE_CTL_BCAST_EN | RFE_CTL_DA_PERFECT); |
| 255 | } |
| 256 | |
| 257 | /* starts the TX path */ |
| 258 | static void lan78xx_start_tx_path(struct usb_device *udev) |
| 259 | { |
| 260 | /* Enable Tx at MAC */ |
| 261 | lan7x_write_reg(udev, MAC_TX, MAC_TX_TXEN); |
| 262 | |
| 263 | /* Enable Tx at SCSRs */ |
| 264 | lan7x_write_reg(udev, LAN78XX_FCT_TX_CTL, FCT_TX_CTL_EN); |
| 265 | } |
| 266 | |
| 267 | /* Starts the Receive path */ |
| 268 | static void lan78xx_start_rx_path(struct usb_device *udev) |
| 269 | { |
| 270 | /* Enable Rx at MAC */ |
| 271 | lan7x_write_reg(udev, MAC_RX, |
| 272 | LAN7X_MAC_RX_MAX_SIZE_DEFAULT | |
| 273 | MAC_RX_FCS_STRIP | MAC_RX_RXEN); |
| 274 | |
| 275 | /* Enable Rx at SCSRs */ |
| 276 | lan7x_write_reg(udev, LAN78XX_FCT_RX_CTL, FCT_RX_CTL_EN); |
| 277 | } |
| 278 | |
| 279 | static int lan78xx_basic_reset(struct usb_device *udev, |
| 280 | struct ueth_data *dev, |
| 281 | struct lan7x_private *priv) |
| 282 | { |
| 283 | int ret; |
| 284 | u32 val; |
| 285 | |
| 286 | ret = lan7x_basic_reset(udev, dev); |
| 287 | if (ret) |
| 288 | return ret; |
| 289 | |
| 290 | /* Keep the chip ID */ |
| 291 | ret = lan7x_read_reg(udev, ID_REV, &val); |
| 292 | if (ret) |
| 293 | return ret; |
| 294 | debug("LAN78xx ID_REV = 0x%08x\n", val); |
| 295 | |
| 296 | priv->chipid = (val & ID_REV_CHIP_ID_MASK) >> 16; |
| 297 | |
| 298 | /* Respond to the IN token with a NAK */ |
| 299 | ret = lan7x_read_reg(udev, LAN78XX_USB_CFG0, &val); |
| 300 | if (ret) |
| 301 | return ret; |
Andrew Thomas | af15946 | 2018-06-18 11:56:06 -0700 | [diff] [blame] | 302 | val &= ~LAN78XX_USB_CFG0_BIR; |
Yuiko Oshino | d2c3197 | 2017-08-11 12:44:58 -0400 | [diff] [blame] | 303 | return lan7x_write_reg(udev, LAN78XX_USB_CFG0, val); |
| 304 | } |
| 305 | |
| 306 | int lan78xx_write_hwaddr(struct udevice *dev) |
| 307 | { |
| 308 | struct usb_device *udev = dev_get_parent_priv(dev); |
| 309 | struct eth_pdata *pdata = dev_get_platdata(dev); |
| 310 | unsigned char *enetaddr = pdata->enetaddr; |
| 311 | u32 addr_lo = get_unaligned_le32(&enetaddr[0]); |
| 312 | u32 addr_hi = (u32)get_unaligned_le16(&enetaddr[4]); |
| 313 | int ret; |
| 314 | |
| 315 | /* set hardware address */ |
| 316 | ret = lan7x_write_reg(udev, RX_ADDRL, addr_lo); |
| 317 | if (ret) |
| 318 | return ret; |
| 319 | |
| 320 | ret = lan7x_write_reg(udev, RX_ADDRH, addr_hi); |
| 321 | if (ret) |
| 322 | return ret; |
| 323 | |
| 324 | ret = lan7x_write_reg(udev, LAN78XX_MAF_LO(0), addr_lo); |
| 325 | if (ret) |
| 326 | return ret; |
| 327 | |
| 328 | ret = lan7x_write_reg(udev, LAN78XX_MAF_HI(0), |
| 329 | addr_hi | LAN78XX_MAF_HI_VALID); |
| 330 | if (ret) |
| 331 | return ret; |
| 332 | |
| 333 | debug("MAC addr %pM written\n", enetaddr); |
| 334 | |
| 335 | return 0; |
| 336 | } |
| 337 | |
| 338 | static int lan78xx_eth_start(struct udevice *dev) |
| 339 | { |
| 340 | struct usb_device *udev = dev_get_parent_priv(dev); |
| 341 | struct lan7x_private *priv = dev_get_priv(dev); |
| 342 | |
| 343 | int ret; |
| 344 | u32 write_buf; |
| 345 | |
| 346 | /* Reset and read Mac addr were done in probe() */ |
| 347 | ret = lan78xx_write_hwaddr(dev); |
| 348 | if (ret) |
| 349 | return ret; |
| 350 | |
| 351 | ret = lan7x_write_reg(udev, LAN78XX_BURST_CAP, 0); |
| 352 | if (ret) |
| 353 | return ret; |
| 354 | |
| 355 | ret = lan7x_write_reg(udev, LAN78XX_BULK_IN_DLY, DEFAULT_BULK_IN_DELAY); |
| 356 | if (ret) |
| 357 | return ret; |
| 358 | |
| 359 | ret = lan7x_write_reg(udev, INT_STS, 0xFFFFFFFF); |
| 360 | if (ret) |
| 361 | return ret; |
| 362 | |
| 363 | /* set FIFO sizes */ |
| 364 | ret = lan7x_write_reg(udev, LAN78XX_FCT_RX_FIFO_END, |
| 365 | (MAX_RX_FIFO_SIZE - 512) / 512); |
| 366 | if (ret) |
| 367 | return ret; |
| 368 | |
| 369 | ret = lan7x_write_reg(udev, LAN78XX_FCT_TX_FIFO_END, |
| 370 | (MAX_TX_FIFO_SIZE - 512) / 512); |
| 371 | if (ret) |
| 372 | return ret; |
| 373 | |
| 374 | /* Init Tx */ |
| 375 | ret = lan7x_write_reg(udev, FLOW, 0); |
| 376 | if (ret) |
| 377 | return ret; |
| 378 | |
| 379 | /* Init Rx. Set Vlan, keep default for VLAN on 78xx */ |
| 380 | ret = lan78xx_set_receive_filter(udev); |
| 381 | if (ret) |
| 382 | return ret; |
| 383 | |
| 384 | /* Init PHY, autonego, and link */ |
| 385 | ret = lan7x_eth_phylib_connect(dev, &priv->ueth); |
| 386 | if (ret) |
| 387 | return ret; |
| 388 | ret = lan7x_eth_phylib_config_start(dev); |
| 389 | if (ret) |
| 390 | return ret; |
| 391 | |
| 392 | /* |
| 393 | * MAC_CR has to be set after PHY init. |
| 394 | * MAC will auto detect the PHY speed. |
| 395 | */ |
| 396 | ret = lan7x_read_reg(udev, MAC_CR, &write_buf); |
| 397 | if (ret) |
| 398 | return ret; |
| 399 | write_buf |= MAC_CR_AUTO_DUPLEX | MAC_CR_AUTO_SPEED | MAC_CR_ADP; |
| 400 | ret = lan7x_write_reg(udev, MAC_CR, write_buf); |
| 401 | if (ret) |
| 402 | return ret; |
| 403 | |
| 404 | lan78xx_start_tx_path(udev); |
| 405 | lan78xx_start_rx_path(udev); |
| 406 | |
| 407 | return lan78xx_update_flowcontrol(udev, &priv->ueth); |
| 408 | } |
| 409 | |
| 410 | int lan78xx_read_rom_hwaddr(struct udevice *dev) |
| 411 | { |
| 412 | struct usb_device *udev = dev_get_parent_priv(dev); |
| 413 | struct eth_pdata *pdata = dev_get_platdata(dev); |
| 414 | struct lan7x_private *priv = dev_get_priv(dev); |
| 415 | int ret; |
| 416 | |
| 417 | ret = lan78xx_read_mac(pdata->enetaddr, udev, priv); |
| 418 | if (ret) |
| 419 | memset(pdata->enetaddr, 0, 6); |
| 420 | |
| 421 | return 0; |
| 422 | } |
| 423 | |
| 424 | static int lan78xx_eth_probe(struct udevice *dev) |
| 425 | { |
| 426 | struct usb_device *udev = dev_get_parent_priv(dev); |
| 427 | struct lan7x_private *priv = dev_get_priv(dev); |
| 428 | struct ueth_data *ueth = &priv->ueth; |
| 429 | struct eth_pdata *pdata = dev_get_platdata(dev); |
| 430 | int ret; |
| 431 | |
| 432 | /* Do a reset in order to get the MAC address from HW */ |
| 433 | if (lan78xx_basic_reset(udev, ueth, priv)) |
| 434 | return 0; |
| 435 | |
| 436 | /* Get the MAC address */ |
| 437 | /* |
| 438 | * We must set the eth->enetaddr from HW because the upper layer |
| 439 | * will force to use the environmental var (usbethaddr) or random if |
| 440 | * there is no valid MAC address in eth->enetaddr. |
| 441 | */ |
| 442 | lan78xx_read_mac(pdata->enetaddr, udev, priv); |
| 443 | /* Do not return 0 for not finding MAC addr in HW */ |
| 444 | |
| 445 | ret = usb_ether_register(dev, ueth, RX_URB_SIZE); |
| 446 | if (ret) |
| 447 | return ret; |
| 448 | |
| 449 | /* Register phylib */ |
| 450 | return lan7x_phylib_register(dev); |
| 451 | } |
| 452 | |
| 453 | static const struct eth_ops lan78xx_eth_ops = { |
| 454 | .start = lan78xx_eth_start, |
| 455 | .send = lan7x_eth_send, |
| 456 | .recv = lan7x_eth_recv, |
| 457 | .free_pkt = lan7x_free_pkt, |
| 458 | .stop = lan7x_eth_stop, |
| 459 | .write_hwaddr = lan78xx_write_hwaddr, |
| 460 | .read_rom_hwaddr = lan78xx_read_rom_hwaddr, |
| 461 | }; |
| 462 | |
| 463 | U_BOOT_DRIVER(lan78xx_eth) = { |
| 464 | .name = "lan78xx_eth", |
| 465 | .id = UCLASS_ETH, |
| 466 | .probe = lan78xx_eth_probe, |
| 467 | .remove = lan7x_eth_remove, |
| 468 | .ops = &lan78xx_eth_ops, |
| 469 | .priv_auto_alloc_size = sizeof(struct lan7x_private), |
| 470 | .platdata_auto_alloc_size = sizeof(struct eth_pdata), |
| 471 | }; |
| 472 | |
| 473 | static const struct usb_device_id lan78xx_eth_id_table[] = { |
| 474 | { USB_DEVICE(0x0424, 0x7800) }, /* LAN7800 USB Ethernet */ |
| 475 | { USB_DEVICE(0x0424, 0x7850) }, /* LAN7850 USB Ethernet */ |
| 476 | { } /* Terminating entry */ |
| 477 | }; |
| 478 | |
| 479 | U_BOOT_USB_DEVICE(lan78xx_eth, lan78xx_eth_id_table); |