blob: 3a7f7f06474e09165b15b9cadd732aeaff7ea732 [file] [log] [blame]
wdenk5c952cf2004-10-10 21:27:30 +00001/*
2 * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
3 * Scott McNutt <smcnutt@psyent.com>
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#ifndef __CONFIG_H
25#define __CONFIG_H
26
27/*------------------------------------------------------------------------
28 * BOARD/CPU
29 *----------------------------------------------------------------------*/
30#define CONFIG_PCI5441 1 /* PCI-5441 board */
31#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */
32
33#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */
34#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/
35#define CFG_NIOS_SYSID_BASE 0x00920828 /* System id address */
36#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
37
38/*------------------------------------------------------------------------
39 * CACHE -- the following will support II/s and II/f. The II/s does not
40 * have dcache, so the cache instructions will behave as NOPs.
41 *----------------------------------------------------------------------*/
42#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */
43#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */
44#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */
45#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */
46
47/*------------------------------------------------------------------------
48 * MEMORY BASE ADDRESSES
49 *----------------------------------------------------------------------*/
50#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */
51#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */
52#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */
53#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */
54
55/*------------------------------------------------------------------------
56 * MEMORY ORGANIZATION
57 * -Monitor at top.
58 * -The heap is placed below the monitor.
59 * -Global data is placed below the heap.
60 * -The stack is placed below global data (&grows down).
61 *----------------------------------------------------------------------*/
62#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128k */
63#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/
64#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
65
66#define CFG_MONITOR_BASE TEXT_BASE
67#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
68#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
69#define CFG_INIT_SP CFG_GBL_DATA_OFFSET
70
71/*------------------------------------------------------------------------
72 * FLASH (AM29LV065D)
73 *----------------------------------------------------------------------*/
74#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */
75#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */
76#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
77#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
78#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size */
79
80/*------------------------------------------------------------------------
81 * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above
82 * CFG_RESET_ADDR, since we assume the monitor is stored at the
83 * reset address, no? This will keep the environment in user region
84 * of flash. NOTE: the monitor length must be multiple of sector size
85 * (which is common practice).
86 *----------------------------------------------------------------------*/
87#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */
88#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
89#define CONFIG_ENV_OVERWRITE /* Serial change Ok */
90#define CFG_ENV_ADDR (CFG_RESET_ADDR + CFG_MONITOR_LEN)
91
92/*------------------------------------------------------------------------
93 * CONSOLE
94 *----------------------------------------------------------------------*/
95#if defined(CONFIG_CONSOLE_JTAG)
96#define CFG_NIOS_CONSOLE 0x00920820 /* JTAG UART base addr */
97#else
98#define CFG_NIOS_CONSOLE 0x009208a0 /* UART base addr */
99#endif
100
101#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
102#define CONFIG_BAUDRATE 115200 /* Initial baudrate */
103#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */
104
105#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/
106
107/*------------------------------------------------------------------------
108 * DEBUG
109 *----------------------------------------------------------------------*/
110#undef CONFIG_ROM_STUBS /* Stubs not in ROM */
111
112/*------------------------------------------------------------------------
113 * TIMEBASE --
114 *
115 * The high res timer defaults to 1 msec. Since it includes the period
116 * registers, we can slow it down to 10 msec using TMRCNT. If the default
117 * period is acceptable, TMRCNT can be left undefined.
118 *----------------------------------------------------------------------*/
119#define CFG_NIOS_TMRBASE 0x00920860 /* Tick timer base addr */
120#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */
121#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */
122#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
123#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
124
125/*------------------------------------------------------------------------
126 * COMMANDS
127 *----------------------------------------------------------------------*/
128#define CONFIG_COMMANDS (CFG_CMD_BDI | \
129 CFG_CMD_ECHO | \
130 CFG_CMD_ENV | \
131 CFG_CMD_FLASH | \
132 CFG_CMD_IMI | \
133 CFG_CMD_IRQ | \
134 CFG_CMD_LOADS | \
135 CFG_CMD_LOADB | \
136 CFG_CMD_MEMORY | \
137 CFG_CMD_MISC | \
138 CFG_CMD_RUN | \
139 CFG_CMD_SAVES )
140#include <cmd_confdefs.h>
141
142/*------------------------------------------------------------------------
143 * MISC
144 *----------------------------------------------------------------------*/
145#define CFG_LONGHELP /* Provide extended help*/
146#define CFG_PROMPT "==> " /* Command prompt */
147#define CFG_CBSIZE 256 /* Console I/O buf size */
148#define CFG_MAXARGS 16 /* Max command args */
149#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */
150#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */
151#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */
152#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */
153#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000
154
155#endif /* __CONFIG_H */