blob: d7d0460ef663b0b8b70a1cb7e00b5ad69ecfb070 [file] [log] [blame]
wdenkf39748a2004-06-09 13:37:52 +00001/*
2 * See file CREDITS for list of people who contributed to this
3 * project.
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License as
7 * published by the Free Software Foundation; either version 2 of
8 * the License, or (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
18 * MA 02111-1307 USA
19 */
20
21#ifndef __LPD7A400_H_
22#define __LPD7A400_H_
23
wdenkf832d8a2004-06-10 21:55:33 +000024#define CONFIG_LPD7A400 /* Logic LH7A400 SDK */
25
wdenkf39748a2004-06-09 13:37:52 +000026#undef CONFIG_USE_IRQ
27
wdenkf39748a2004-06-09 13:37:52 +000028/*
29 * This board uses the logic LH7A400-10 card engine
30 */
31#include <configs/lpd7a400-10.h>
32
wdenkf39748a2004-06-09 13:37:52 +000033#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
34#define CONFIG_SETUP_MEMORY_TAGS 1
35#define CONFIG_INITRD_TAG 1
36
37/*
38 * Size of malloc() pool
39 */
40#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
41#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
42
43/*
44 * select serial console configuration
45 */
46#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */
47
48/* allow to overwrite serial and ethaddr */
49#define CONFIG_ENV_OVERWRITE
50
51#define CONFIG_BAUDRATE 115200
52#define CONFIG_IPADDR 192.168.1.100
53#define CONFIG_NETMASK 255.255.1.0
54#define CONFIG_SERVERIP 192.168.1.1
55
56#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
57
58#ifndef USE_920T_MMU
59#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING) & ~(CFG_CMD_CACHE))
60#else
61#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DATE)
62#endif
63
64
65/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
66#include <cmd_confdefs.h>
67
68#define CONFIG_BOOTDELAY 3
69
70#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
71#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
72/* what's this ? it's not used anywhere */
73#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
74#endif
75
76/*
77 * Miscellaneous configurable options
78 */
79#define CFG_LONGHELP /* undef to save memory */
80#define CFG_PROMPT "LPD7A400> " /* Monitor Command Prompt */
81#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
82#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
83#define CFG_MAXARGS 16 /* max number of command args */
84#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
85
86#define CFG_MEMTEST_START 0xc0300000 /* memtest works on */
87#define CFG_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
88
89#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
90
91#define CFG_LOAD_ADDR 0xc0f00000 /* default load address */
92
93/* valid baudrates */
94#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
95
96/* size and location of u-boot in flash */
97#define CFG_MONITOR_BASE CFG_FLASH_BASE
98#define CFG_MONITOR_LEN (256<<10)
99
100#define CFG_ENV_IS_IN_FLASH 1
101
102/* Address and size of Primary Environment Sector */
103#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0xFC0000)
104#define CFG_ENV_SIZE 0x40000
105
106#endif /* __LPD7A400_H_ */