blob: da87188e84a2ccad0cb8eddf717ca35b16bd4dbb [file] [log] [blame]
Michal Simek84c72042015-01-15 10:01:51 +01001/*
2 * Configuration for Xilinx ZynqMP
3 * (C) Copyright 2014 - 2015 Xilinx, Inc.
4 * Michal Simek <michal.simek@xilinx.com>
5 *
6 * Based on Configuration for Versatile Express
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11#ifndef __XILINX_ZYNQMP_H
12#define __XILINX_ZYNQMP_H
13
14#define CONFIG_REMAKE_ELF
15
16/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
17
18#define CONFIG_SYS_NO_FLASH
19
20#define CONFIG_SYS_GENERIC_BOARD
21
22/* Generic Interrupt Controller Definitions */
23#define CONFIG_GICV2
24#define GICD_BASE 0xF9010000
25#define GICC_BASE 0xF9020000
26
27/* Physical Memory Map */
28#define CONFIG_NR_DRAM_BANKS 1
29#define CONFIG_SYS_SDRAM_BASE 0
30#define CONFIG_SYS_SDRAM_SIZE 0x40000000
31
32#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
33#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_SDRAM_SIZE
34
35/* Have release address at the end of 256MB for now */
36#define CPU_RELEASE_ADDR 0xFFFFFF0
37
38/* Cache Definitions */
Siva Durga Prasad Paladugu222b2122014-12-06 12:57:51 +053039#define CONFIG_SYS_CACHELINE_SIZE 64
Michal Simek84c72042015-01-15 10:01:51 +010040
41#define CONFIG_IDENT_STRING " Xilinx ZynqMP"
42
Michal Simek84c72042015-01-15 10:01:51 +010043#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
44
45/* Flat Device Tree Definitions */
46#define CONFIG_OF_LIBFDT
47
48/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
49#define COUNTER_FREQUENCY 4000000
50
51/* Size of malloc() pool */
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +053052#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000)
Michal Simek84c72042015-01-15 10:01:51 +010053
54/* Serial setup */
Siva Durga Prasad Paladugub0d18be2015-06-10 15:50:59 +053055#if defined(CONFIG_ZYNQMP_DCC)
56# define CONFIG_ARM_DCC
57# define CONFIG_CPU_ARMV8
58#else
59# if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1)
60# define CONFIG_ZYNQ_SERIAL
61# endif
62#endif
Michal Simek84c72042015-01-15 10:01:51 +010063
64#define CONFIG_CONS_INDEX 0
65#define CONFIG_BAUDRATE 115200
66#define CONFIG_SYS_BAUDRATE_TABLE \
67 { 4800, 9600, 19200, 38400, 57600, 115200 }
68
69/* Command line configuration */
70#define CONFIG_CMD_ENV
71#define CONFIG_CMD_EXT2
72#define CONFIG_CMD_EXT4
73#define CONFIG_CMD_FAT
Siva Durga Prasad Paladugu5af37bd2015-03-13 17:43:49 +053074#define CONFIG_CMD_FS_GENERIC
Michal Simek84c72042015-01-15 10:01:51 +010075#define CONFIG_DOS_PARTITION
Michal Simek5cb24202015-04-15 13:36:40 +020076#define CONFIG_CMD_ELF
77#define CONFIG_MP
Michal Simek84c72042015-01-15 10:01:51 +010078
Michal Simekcb7ea822015-07-23 12:03:55 +020079#define CONFIG_CMD_MII
80
81/* BOOTP options */
82#define CONFIG_BOOTP_BOOTFILESIZE
83#define CONFIG_BOOTP_BOOTPATH
84#define CONFIG_BOOTP_GATEWAY
85#define CONFIG_BOOTP_HOSTNAME
86#define CONFIG_BOOTP_MAY_FAIL
87#define CONFIG_BOOTP_SERVERIP
88
Siva Durga Prasad Paladugu48d72602015-04-15 11:48:48 +053089/* SPI */
90#ifdef CONFIG_ZYNQ_SPI
Siva Durga Prasad Paladugu48d72602015-04-15 11:48:48 +053091# define CONFIG_SPI_FLASH_SST
92# define CONFIG_CMD_SF
93#endif
94
Michal Simek84c72042015-01-15 10:01:51 +010095#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
96# define CONFIG_MMC
97# define CONFIG_GENERIC_MMC
98# define CONFIG_SDHCI
99# define CONFIG_ZYNQ_SDHCI
100# define CONFIG_CMD_MMC
101#endif
102
103#if defined(CONFIG_ZYNQ_SDHCI)
104# define CONFIG_FAT_WRITE
105# define CONFIG_CMD_EXT4_WRITE
106#endif
107
108/* Miscellaneous configurable options */
109#define CONFIG_SYS_LOAD_ADDR 0x8000000
110
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +0530111#if defined(CONFIG_ZYNQMP_USB)
112#define CONFIG_USB_DWC3
113#define CONFIG_USB_DWC3_GADGET
114
115#define CONFIG_USB_GADGET
116#define CONFIG_USB_GADGET_DOWNLOAD
117#define CONFIG_USB_GADGET_DUALSPEED
118#define CONFIG_USB_GADGET_VBUS_DRAW 2
119#define CONFIG_USBDOWNLOAD_GADGET
120#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000
121#define DFU_DEFAULT_POLL_TIMEOUT 300
122#define CONFIG_USB_FUNCTION_DFU
123#define CONFIG_DFU_RAM
124#define CONFIG_G_DNL_VENDOR_NUM 0x03FD
125#define CONFIG_G_DNL_PRODUCT_NUM 0x0300
126#define CONFIG_G_DNL_MANUFACTURER "Xilinx"
127#define CONFIG_USB_CABLE_CHECK
128#define CONFIG_CMD_DFU
129#define CONFIG_CMD_THOR_DOWNLOAD
130#define CONFIG_USB_FUNCTION_THOR
131#define CONFIG_THOR_RESET_OFF
132#define DFU_ALT_INFO_RAM \
133 "dfu_ram_info=" \
134 "set dfu_alt_info " \
135 "Image ram 0x200000 0x1800000\\\\;" \
136 "system.dtb ram 0x7000000 0x40000\0" \
137 "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
138 "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
139
140#define DFU_ALT_INFO \
141 DFU_ALT_INFO_RAM
142#endif
143
144#if !defined(DFU_ALT_INFO)
145# define DFU_ALT_INFO
146#endif
147
Michal Simek84c72042015-01-15 10:01:51 +0100148/* Initial environment variables */
149#define CONFIG_EXTRA_ENV_SETTINGS \
150 "kernel_addr=0x80000\0" \
151 "fdt_addr=0x7000000\0" \
152 "fdt_high=0x10000000\0" \
Siva Durga Prasad Paladugu5af37bd2015-03-13 17:43:49 +0530153 "sdboot=mmcinfo && load mmc 0:0 $fdt_addr system.dtb && " \
Siva Durga Prasad Paladugu16fa00a2015-08-04 13:03:26 +0530154 "load mmc 0:0 $kernel_addr Image && booti $kernel_addr - $fdt_addr\0" \
155 DFU_ALT_INFO
Michal Simek84c72042015-01-15 10:01:51 +0100156
157#define CONFIG_BOOTARGS "setenv bootargs console=ttyPS0,${baudrate} " \
158 "earlycon=cdns,mmio,0xff000000,${baudrate}n8"
159#define CONFIG_PREBOOT "run bootargs"
160#define CONFIG_BOOTCOMMAND "run $modeboot"
161#define CONFIG_BOOTDELAY 5
162
163#define CONFIG_BOARD_LATE_INIT
164
165/* Do not preserve environment */
166#define CONFIG_ENV_IS_NOWHERE 1
167#define CONFIG_ENV_SIZE 0x1000
168
169/* Monitor Command Prompt */
170/* Console I/O Buffer Size */
171#define CONFIG_SYS_CBSIZE 2048
Michal Simek84c72042015-01-15 10:01:51 +0100172#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
173 sizeof(CONFIG_SYS_PROMPT) + 16)
174#define CONFIG_SYS_HUSH_PARSER
175#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
176#define CONFIG_SYS_LONGHELP
177#define CONFIG_CMDLINE_EDITING
178#define CONFIG_SYS_MAXARGS 64
179
Michal Simekcb7ea822015-07-23 12:03:55 +0200180/* Ethernet driver */
181#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) || \
182 defined(CONFIG_ZYNQ_GEM2) || defined(CONFIG_ZYNQ_GEM3)
183# define CONFIG_NET_MULTI
184# define CONFIG_ZYNQ_GEM
185# define CONFIG_MII
186# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
187# define CONFIG_PHYLIB
188# define CONFIG_PHY_MARVELL
189#endif
190
Siva Durga Prasad Paladugu2594e032015-03-03 15:01:44 +0530191/* I2C */
192#if defined(CONFIG_SYS_I2C_ZYNQ)
193# define CONFIG_CMD_I2C
194# define CONFIG_SYS_I2C
195# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
196# define CONFIG_SYS_I2C_ZYNQ_SLAVE 0
197#endif
198
Siva Durga Prasad Paladugu2594e032015-03-03 15:01:44 +0530199/* EEPROM */
200#ifdef CONFIG_ZYNQMP_EEPROM
201# define CONFIG_CMD_EEPROM
202# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
203# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
204# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
205# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
206# define CONFIG_SYS_EEPROM_SIZE (64 * 1024)
207#endif
208
Michal Simek6fe6f132015-07-23 13:27:40 +0200209#ifdef CONFIG_AHCI
210#define CONFIG_LIBATA
211#define CONFIG_SCSI_AHCI
212#define CONFIG_SCSI_AHCI_PLAT
213#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
214#define CONFIG_SYS_SCSI_MAX_LUN 1
215#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
216 CONFIG_SYS_SCSI_MAX_LUN)
217#define CONFIG_CMD_SCSI
218#endif
219
Michal Simek84c72042015-01-15 10:01:51 +0100220#define CONFIG_FIT
221#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
222
223#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
224
225#define CONFIG_CMD_BOOTI
226#define CONFIG_CMD_UNZIP
227
228#define CONFIG_BOARD_EARLY_INIT_R
229#define CONFIG_CLOCKS
230
231#endif /* __XILINX_ZYNQMP_H */