include/configs/pico-imx7d.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2017 NXP Semiconductors
 *
 * Configuration settings for the i.MX7D Pico board.
 */

#ifndef __PICO_IMX7D_CONFIG_H
#define __PICO_IMX7D_CONFIG_H

#include "mx7_common.h"

#include "imx7_spl.h"

#ifdef CONFIG_SPL_OS_BOOT
/* Falcon Mode */
#define CONFIG_SPL_FS_LOAD_ARGS_NAME	"args"
#define CONFIG_SPL_FS_LOAD_KERNEL_NAME	"uImage"
#define CONFIG_SYS_SPL_ARGS_ADDR	0x88000000

/* Falcon Mode - MMC support: args@1MB kernel@2MB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x1000  /* 2MB */
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)

#define CONFIG_MXC_UART_BASE		UART5_IPS_BASE_ADDR

/* Network */
#define CONFIG_FEC_MXC
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		1

#define CONFIG_PHY_ATHEROS

/* ENET1 */
#define IMX_FEC_BASE			ENET_IPS_BASE_ADDR

/* MMC Config */
#define CONFIG_SYS_FSL_ESDHC_ADDR	0

#define CONFIG_DFU_ENV_SETTINGS \
	"dfu_alt_info=" \
		"spl raw 0x2 0x400;" \
		"u-boot raw 0x8a 0x1000;" \
		"/boot/zImage ext4 0 1;" \
		"/boot/imx7d-pico-hobbit.dtb ext4 0 1;" \
		"/boot/imx7d-pico-pi.dtb ext4 0 1;" \
		"rootfs part 0 1\0" \

/* When booting with FIT specify the node entry containing boot.scr */
#if defined(CONFIG_FIT)
#define PICO_BOOT_ENV \
	BOOTENV								\
	"fdtovaddr=0x83100000\0"					\
	"scriptaddr=0x83200000\0"					\
	"mmcargs=setenv bootargs console=${console},${baudrate} "	\
		"rootwait rw\0"						\
	"boot_a_script="						\
		"load ${devtype} ${devnum}:${distro_bootpart} "		\
			"${scriptaddr} ${prefix}${script}; "		\
		"iminfo ${scriptaddr};"					\
		"if test $? -eq 1; then hab_failsafe; fi;"		\
		"source ${scriptaddr}:bootscr\0"
#else
#define PICO_BOOT_ENV \
	"bootmenu_0=Boot using PICO-Hobbit baseboard=" \
		"setenv fdtfile imx7d-pico-hobbit.dtb\0" \
	"bootmenu_1=Boot using PICO-Dwarf baseboard=" \
		"setenv fdtfile imx7d-pico-dwarf.dtb\0" \
	"bootmenu_2=Boot using PICO-Nymph baseboard=" \
		"setenv fdtfile imx7d-pico-nymph.dtb\0" \
	"bootmenu_3=Boot using PICO-Pi baseboard=" \
		"setenv fdtfile imx7d-pico-pi.dtb\0" \
	BOOTENV
#endif


#define CONFIG_SYS_MMC_IMG_LOAD_PART	1

#define CONFIG_EXTRA_ENV_SETTINGS \
	"image=zImage\0" \
	"splashpos=m,m\0" \
	"splashimage=" __stringify(CONFIG_LOADADDR) "\0" \
	"console=ttymxc4\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
	"videomode=video=ctfb:x:800,y:480,depth:24,mode:0,pclk:30000,le:46,ri:210,up:22,lo:23,hs:20,vs:10,sync:0,vmode:0\0" \
	"fdt_addr=0x83000000\0" \
	"fdt_addr_r=0x83000000\0" \
	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
	"ramdisk_addr_r=0x83000000\0" \
	"ramdiskaddr=0x83000000\0" \
	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
	CONFIG_DFU_ENV_SETTINGS \
	"findfdt=" \
		"if test $fdtfile = ask ; then " \
			"bootmenu -1; fi;" \
		"if test $fdtfile != ask ; then " \
			"saveenv; fi;\0" \
	"finduuid=part uuid mmc 0:1 uuid\0" \
	"partitions=" \
		"uuid_disk=${uuid_gpt_disk};" \
		"name=rootfs,size=0,uuid=${uuid_gpt_rootfs}\0" \
	"fastboot_partition_alias_system=rootfs\0" \
	"setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \
	PICO_BOOT_ENV

#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 0) \
	func(USB, usb, 0) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na)

#include <config_distro_bootcmd.h>

#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000

/* Physical Memory Map */
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* I2C configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_MXC_I2C2
#define CONFIG_SYS_I2C_MXC_I2C3
#define CONFIG_SYS_I2C_MXC_I2C4
#define CONFIG_SYS_I2C_SPEED		100000

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE3000
#define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08

#ifdef CONFIG_DM_VIDEO
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#endif

/* FLASH and environment organization */
#define CONFIG_ENV_SIZE			SZ_8K

/* Environment starts at 768k = 768 * 1024 = 786432 */
#define CONFIG_ENV_OFFSET		786432
/*
 * Detect overlap between U-Boot image and environment area in build-time
 *
 * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.img offset
 * CONFIG_BOARD_SIZE_LIMIT = 768k - 69k = 699k = 715776
 *
 * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
 * write the direct value here
 */
#define CONFIG_BOARD_SIZE_LIMIT		715776

#define CONFIG_SYS_FSL_USDHC_NUM		2

#define CONFIG_SYS_MMC_ENV_DEV			0
#define CONFIG_SYS_MMC_ENV_PART		0

/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC			(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS			0
#define CONFIG_USB_MAX_CONTROLLER_COUNT	2

#define CONFIG_IMX_THERMAL

#endif