blob: f14cbc6dbf7f9606e01720adbbec63963ebc8519 [file] [log] [blame]
Alper Nebi Yasaka355ece2020-10-22 22:43:13 +03001// SPDX-License-Identifier: GPL-2.0
Eric Gao1c398402017-05-02 18:23:50 +08002/*
3 * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
4 * Author: Eric Gao <eric.gao@rock-chips.com>
Eric Gao1c398402017-05-02 18:23:50 +08005 */
6
7#include <common.h>
8#include <clk.h>
9#include <display.h>
10#include <dm.h>
Simon Glassf7ae49f2020-05-10 11:40:05 -060011#include <log.h>
Eric Gao1c398402017-05-02 18:23:50 +080012#include <panel.h>
13#include <regmap.h>
Simon Glass401d1c42020-10-30 21:38:53 -060014#include <asm/global_data.h>
eric.gao@rock-chips.com36602eb2017-06-21 11:20:33 +080015#include "rk_mipi.h"
Eric Gao1c398402017-05-02 18:23:50 +080016#include <syscon.h>
17#include <asm/gpio.h>
Eric Gao1c398402017-05-02 18:23:50 +080018#include <asm/io.h>
19#include <dm/uclass-internal.h>
20#include <linux/kernel.h>
Kever Yang15f09a12019-03-28 11:01:23 +080021#include <asm/arch-rockchip/clock.h>
Jagan Tekib52a1992020-01-09 14:22:17 +053022#include <asm/arch-rockchip/cru.h>
Kever Yang15f09a12019-03-28 11:01:23 +080023#include <asm/arch-rockchip/grf_rk3399.h>
24#include <asm/arch-rockchip/rockchip_mipi_dsi.h>
Eric Gao1c398402017-05-02 18:23:50 +080025
26DECLARE_GLOBAL_DATA_PTR;
27
eric.gao@rock-chips.com36602eb2017-06-21 11:20:33 +080028int rk_mipi_read_timing(struct udevice *dev,
29 struct display_timing *timing)
Eric Gao1c398402017-05-02 18:23:50 +080030{
31 int ret;
32
Kever Yangc3d31af2020-02-19 09:45:37 +080033 ret = ofnode_decode_display_timing(dev_ofnode(dev), 0, timing);
Eric Gao1c398402017-05-02 18:23:50 +080034 if (ret) {
35 debug("%s: Failed to decode display timing (ret=%d)\n",
36 __func__, ret);
37 return -EINVAL;
38 }
39
40 return 0;
41}
42
43/*
44 * Register write function used only for mipi dsi controller.
45 * Parameter:
46 * @regs: mipi controller address
47 * @reg: combination of regaddr(16bit)|bitswidth(8bit)|offset(8bit) you can
48 * use define in rk_mipi.h directly for this parameter
49 * @val: value that will be write to specified bits of register
50 */
eric.gao@rock-chips.com0c9eceb2017-06-21 11:12:50 +080051static void rk_mipi_dsi_write(uintptr_t regs, u32 reg, u32 val)
Eric Gao1c398402017-05-02 18:23:50 +080052{
53 u32 dat;
54 u32 mask;
55 u32 offset = (reg >> OFFSET_SHIFT) & 0xff;
56 u32 bits = (reg >> BITS_SHIFT) & 0xff;
eric.gao@rock-chips.com0c9eceb2017-06-21 11:12:50 +080057 uintptr_t addr = (reg >> ADDR_SHIFT) + regs;
Eric Gao1c398402017-05-02 18:23:50 +080058
59 /* Mask for specifiled bits,the corresponding bits will be clear */
60 mask = ~((0xffffffff << offset) & (0xffffffff >> (32 - offset - bits)));
61
62 /* Make sure val in the available range */
63 val &= ~(0xffffffff << bits);
64
65 /* Get register's original val */
66 dat = readl(addr);
67
68 /* Clear specified bits */
69 dat &= mask;
70
71 /* Fill specified bits */
72 dat |= val << offset;
73
74 writel(dat, addr);
75}
76
eric.gao@rock-chips.com36602eb2017-06-21 11:20:33 +080077int rk_mipi_dsi_enable(struct udevice *dev,
78 const struct display_timing *timing)
Eric Gao1c398402017-05-02 18:23:50 +080079{
Kever Yang653ac182020-02-19 09:45:38 +080080 ofnode node, timing_node;
Eric Gao1c398402017-05-02 18:23:50 +080081 int val;
82 struct rk_mipi_priv *priv = dev_get_priv(dev);
eric.gao@rock-chips.com0c9eceb2017-06-21 11:12:50 +080083 uintptr_t regs = priv->regs;
Eric Gao1c398402017-05-02 18:23:50 +080084 u32 txbyte_clk = priv->txbyte_clk;
85 u32 txesc_clk = priv->txesc_clk;
86
87 txesc_clk = txbyte_clk/(txbyte_clk/txesc_clk + 1);
88
Eric Gao1c398402017-05-02 18:23:50 +080089 /* Set Display timing parameter */
90 rk_mipi_dsi_write(regs, VID_HSA_TIME, timing->hsync_len.typ);
91 rk_mipi_dsi_write(regs, VID_HBP_TIME, timing->hback_porch.typ);
92 rk_mipi_dsi_write(regs, VID_HLINE_TIME, (timing->hsync_len.typ
93 + timing->hback_porch.typ + timing->hactive.typ
94 + timing->hfront_porch.typ));
95 rk_mipi_dsi_write(regs, VID_VSA_LINES, timing->vsync_len.typ);
96 rk_mipi_dsi_write(regs, VID_VBP_LINES, timing->vback_porch.typ);
97 rk_mipi_dsi_write(regs, VID_VFP_LINES, timing->vfront_porch.typ);
98 rk_mipi_dsi_write(regs, VID_ACTIVE_LINES, timing->vactive.typ);
99
100 /* Set Signal Polarity */
101 val = (timing->flags & DISPLAY_FLAGS_HSYNC_LOW) ? 1 : 0;
102 rk_mipi_dsi_write(regs, HSYNC_ACTIVE_LOW, val);
103
104 val = (timing->flags & DISPLAY_FLAGS_VSYNC_LOW) ? 1 : 0;
105 rk_mipi_dsi_write(regs, VSYNC_ACTIVE_LOW, val);
106
107 val = (timing->flags & DISPLAY_FLAGS_DE_LOW) ? 1 : 0;
Richard Röjforsd57720a2018-11-07 11:34:44 +0100108 rk_mipi_dsi_write(regs, DATAEN_ACTIVE_LOW, val);
Eric Gao1c398402017-05-02 18:23:50 +0800109
110 val = (timing->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE) ? 1 : 0;
111 rk_mipi_dsi_write(regs, COLORM_ACTIVE_LOW, val);
112
113 /* Set video mode */
114 rk_mipi_dsi_write(regs, CMD_VIDEO_MODE, VIDEO_MODE);
115
116 /* Set video mode transmission type as burst mode */
117 rk_mipi_dsi_write(regs, VID_MODE_TYPE, BURST_MODE);
118
119 /* Set pix num in a video package */
120 rk_mipi_dsi_write(regs, VID_PKT_SIZE, 0x4b0);
121
122 /* Set dpi color coding depth 24 bit */
Simon Glassf10643c2020-12-19 10:40:14 -0700123 timing_node = ofnode_find_subnode(dev_ofnode(dev), "display-timings");
Kever Yang653ac182020-02-19 09:45:38 +0800124 node = ofnode_first_subnode(timing_node);
125
126 val = ofnode_read_u32_default(node, "bits-per-pixel", -1);
Eric Gao1c398402017-05-02 18:23:50 +0800127 switch (val) {
128 case 16:
129 rk_mipi_dsi_write(regs, DPI_COLOR_CODING, DPI_16BIT_CFG_1);
130 break;
131 case 24:
132 rk_mipi_dsi_write(regs, DPI_COLOR_CODING, DPI_24BIT);
133 break;
134 case 30:
135 rk_mipi_dsi_write(regs, DPI_COLOR_CODING, DPI_30BIT);
136 break;
137 default:
138 rk_mipi_dsi_write(regs, DPI_COLOR_CODING, DPI_24BIT);
139 }
140 /* Enable low power mode */
141 rk_mipi_dsi_write(regs, LP_CMD_EN, 1);
142 rk_mipi_dsi_write(regs, LP_HFP_EN, 1);
143 rk_mipi_dsi_write(regs, LP_VACT_EN, 1);
144 rk_mipi_dsi_write(regs, LP_VFP_EN, 1);
145 rk_mipi_dsi_write(regs, LP_VBP_EN, 1);
146 rk_mipi_dsi_write(regs, LP_VSA_EN, 1);
147
148 /* Division for timeout counter clk */
149 rk_mipi_dsi_write(regs, TO_CLK_DIVISION, 0x0a);
150
151 /* Tx esc clk division from txbyte clk */
152 rk_mipi_dsi_write(regs, TX_ESC_CLK_DIVISION, txbyte_clk/txesc_clk);
153
154 /* Timeout count for hs<->lp transation between Line period */
155 rk_mipi_dsi_write(regs, HSTX_TO_CNT, 0x3e8);
156
157 /* Phy State transfer timing */
158 rk_mipi_dsi_write(regs, PHY_STOP_WAIT_TIME, 32);
159 rk_mipi_dsi_write(regs, PHY_TXREQUESTCLKHS, 1);
160 rk_mipi_dsi_write(regs, PHY_HS2LP_TIME, 0x14);
161 rk_mipi_dsi_write(regs, PHY_LP2HS_TIME, 0x10);
162 rk_mipi_dsi_write(regs, MAX_RD_TIME, 0x2710);
163
164 /* Power on */
165 rk_mipi_dsi_write(regs, SHUTDOWNZ, 1);
166
167 return 0;
168}
169
170/* rk mipi dphy write function. It is used to write test data to dphy */
eric.gao@rock-chips.com0c9eceb2017-06-21 11:12:50 +0800171static void rk_mipi_phy_write(uintptr_t regs, unsigned char test_code,
Eric Gao1c398402017-05-02 18:23:50 +0800172 unsigned char *test_data, unsigned char size)
173{
174 int i = 0;
175
176 /* Write Test code */
177 rk_mipi_dsi_write(regs, PHY_TESTCLK, 1);
178 rk_mipi_dsi_write(regs, PHY_TESTDIN, test_code);
179 rk_mipi_dsi_write(regs, PHY_TESTEN, 1);
180 rk_mipi_dsi_write(regs, PHY_TESTCLK, 0);
181 rk_mipi_dsi_write(regs, PHY_TESTEN, 0);
182
183 /* Write Test data */
184 for (i = 0; i < size; i++) {
185 rk_mipi_dsi_write(regs, PHY_TESTCLK, 0);
186 rk_mipi_dsi_write(regs, PHY_TESTDIN, test_data[i]);
187 rk_mipi_dsi_write(regs, PHY_TESTCLK, 1);
188 }
189}
190
191/*
192 * Mipi dphy config function. Calculate the suitable prediv, feedback div,
193 * fsfreqrang value ,cap ,lpf and so on according to the given pix clk rate,
194 * and then enable phy.
195 */
eric.gao@rock-chips.com36602eb2017-06-21 11:20:33 +0800196int rk_mipi_phy_enable(struct udevice *dev)
Eric Gao1c398402017-05-02 18:23:50 +0800197{
198 int i;
199 struct rk_mipi_priv *priv = dev_get_priv(dev);
eric.gao@rock-chips.com0c9eceb2017-06-21 11:12:50 +0800200 uintptr_t regs = priv->regs;
Eric Gao1c398402017-05-02 18:23:50 +0800201 u64 fbdiv;
202 u64 prediv = 1;
203 u32 max_fbdiv = 512;
204 u32 max_prediv, min_prediv;
205 u64 ddr_clk = priv->phy_clk;
206 u32 refclk = priv->ref_clk;
207 u32 remain = refclk;
208 unsigned char test_data[2] = {0};
209
210 int freq_rang[][2] = {
211 {90, 0x01}, {100, 0x10}, {110, 0x20}, {130, 0x01},
212 {140, 0x11}, {150, 0x21}, {170, 0x02}, {180, 0x12},
213 {200, 0x22}, {220, 0x03}, {240, 0x13}, {250, 0x23},
214 {270, 0x04}, {300, 0x14}, {330, 0x05}, {360, 0x15},
215 {400, 0x25}, {450, 0x06}, {500, 0x16}, {550, 0x07},
216 {600, 0x17}, {650, 0x08}, {700, 0x18}, {750, 0x09},
217 {800, 0x19}, {850, 0x29}, {900, 0x39}, {950, 0x0a},
218 {1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b},
219 {1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c},
220 {1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c}
221 };
222
223 /* Shutdown mode */
224 rk_mipi_dsi_write(regs, PHY_SHUTDOWNZ, 0);
225 rk_mipi_dsi_write(regs, PHY_RSTZ, 0);
226 rk_mipi_dsi_write(regs, PHY_TESTCLR, 1);
227
228 /* Pll locking */
229 rk_mipi_dsi_write(regs, PHY_TESTCLR, 0);
230
231 /* config cp and lfp */
232 test_data[0] = 0x80 | (ddr_clk / (200 * MHz)) << 3 | 0x3;
233 rk_mipi_phy_write(regs, CODE_PLL_VCORANGE_VCOCAP, test_data, 1);
234
235 test_data[0] = 0x8;
236 rk_mipi_phy_write(regs, CODE_PLL_CPCTRL, test_data, 1);
237
238 test_data[0] = 0x80 | 0x40;
239 rk_mipi_phy_write(regs, CODE_PLL_LPF_CP, test_data, 1);
240
241 /* select the suitable value for fsfreqrang reg */
242 for (i = 0; i < ARRAY_SIZE(freq_rang); i++) {
Richard Röjfors4c2808f2018-11-14 14:13:53 +0100243 if (ddr_clk / (MHz) <= freq_rang[i][0])
Eric Gao1c398402017-05-02 18:23:50 +0800244 break;
245 }
246 if (i == ARRAY_SIZE(freq_rang)) {
247 debug("%s: Dphy freq out of range!\n", __func__);
248 return -EINVAL;
249 }
250 test_data[0] = freq_rang[i][1] << 1;
251 rk_mipi_phy_write(regs, CODE_HS_RX_LANE0, test_data, 1);
252
253 /*
254 * Calculate the best ddrclk and it's corresponding div value. If the
255 * given pixelclock is great than 250M, ddrclk will be fix 1500M.
256 * Otherwise,
257 * it's equal to ddr_clk= pixclk * 6. 40MHz >= refclk / prediv >= 5MHz
258 * according to spec.
259 */
260 max_prediv = (refclk / (5 * MHz));
261 min_prediv = ((refclk / (40 * MHz)) ? (refclk / (40 * MHz) + 1) : 1);
262
263 debug("%s: DEBUG: max_prediv=%u, min_prediv=%u\n", __func__, max_prediv,
264 min_prediv);
265
266 if (max_prediv < min_prediv) {
267 debug("%s: Invalid refclk value\n", __func__);
268 return -EINVAL;
269 }
270
271 /* Calculate the best refclk and feedback division value for dphy pll */
272 for (i = min_prediv; i < max_prediv; i++) {
273 if ((ddr_clk * i % refclk < remain) &&
274 (ddr_clk * i / refclk) < max_fbdiv) {
275 prediv = i;
276 remain = ddr_clk * i % refclk;
277 }
278 }
279 fbdiv = ddr_clk * prediv / refclk;
280 ddr_clk = refclk * fbdiv / prediv;
281 priv->phy_clk = ddr_clk;
282
283 debug("%s: DEBUG: refclk=%u, refclk=%llu, fbdiv=%llu, phyclk=%llu\n",
284 __func__, refclk, prediv, fbdiv, ddr_clk);
285
286 /* config prediv and feedback reg */
287 test_data[0] = prediv - 1;
288 rk_mipi_phy_write(regs, CODE_PLL_INPUT_DIV_RAT, test_data, 1);
289 test_data[0] = (fbdiv - 1) & 0x1f;
290 rk_mipi_phy_write(regs, CODE_PLL_LOOP_DIV_RAT, test_data, 1);
291 test_data[0] = (fbdiv - 1) >> 5 | 0x80;
292 rk_mipi_phy_write(regs, CODE_PLL_LOOP_DIV_RAT, test_data, 1);
293 test_data[0] = 0x30;
294 rk_mipi_phy_write(regs, CODE_PLL_INPUT_LOOP_DIV_RAT, test_data, 1);
295
296 /* rest config */
297 test_data[0] = 0x4d;
298 rk_mipi_phy_write(regs, CODE_BANDGAP_BIAS_CTRL, test_data, 1);
299
300 test_data[0] = 0x3d;
301 rk_mipi_phy_write(regs, CODE_TERMINATION_CTRL, test_data, 1);
302
303 test_data[0] = 0xdf;
304 rk_mipi_phy_write(regs, CODE_TERMINATION_CTRL, test_data, 1);
305
306 test_data[0] = 0x7;
307 rk_mipi_phy_write(regs, CODE_AFE_BIAS_BANDGAP_ANOLOG, test_data, 1);
308
309 test_data[0] = 0x80 | 0x7;
310 rk_mipi_phy_write(regs, CODE_AFE_BIAS_BANDGAP_ANOLOG, test_data, 1);
311
312 test_data[0] = 0x80 | 15;
313 rk_mipi_phy_write(regs, CODE_HSTXDATALANEREQUSETSTATETIME,
314 test_data, 1);
315 test_data[0] = 0x80 | 85;
316 rk_mipi_phy_write(regs, CODE_HSTXDATALANEPREPARESTATETIME,
317 test_data, 1);
318 test_data[0] = 0x40 | 10;
319 rk_mipi_phy_write(regs, CODE_HSTXDATALANEHSZEROSTATETIME,
320 test_data, 1);
321
322 /* enter into stop mode */
323 rk_mipi_dsi_write(regs, N_LANES, 0x03);
324 rk_mipi_dsi_write(regs, PHY_ENABLECLK, 1);
325 rk_mipi_dsi_write(regs, PHY_FORCEPLL, 1);
326 rk_mipi_dsi_write(regs, PHY_SHUTDOWNZ, 1);
327 rk_mipi_dsi_write(regs, PHY_RSTZ, 1);
328
329 return 0;
330}