blob: 555942a2c2ab79100e879c18b698b2a4fd371ddf [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Fabio Estevam7891e252012-09-13 03:18:20 +00002/*
3 * Copyright (C) 2012 Freescale Semiconductor, Inc.
4 *
5 * Configuration settings for the Freescale i.MX6Q SabreSD board.
Fabio Estevam7891e252012-09-13 03:18:20 +00006 */
7
Fabio Estevam258f76f2017-06-01 12:59:52 -03008#ifndef __MX6SABRESD_CONFIG_H
9#define __MX6SABRESD_CONFIG_H
Fabio Estevam7891e252012-09-13 03:18:20 +000010
John Tobias15582002014-11-12 14:27:44 -080011#ifdef CONFIG_SPL
John Tobias15582002014-11-12 14:27:44 -080012#include "imx6_spl.h"
13#endif
14
Fabio Estevam7891e252012-09-13 03:18:20 +000015#define CONFIG_MACH_TYPE 3980
Fabio Estevambcfc7112012-09-24 08:09:32 +000016#define CONFIG_MXC_UART_BASE UART1_BASE
Simon Glass12ca05a2016-10-17 20:12:39 -060017#define CONSOLE_DEV "ttymxc0"
Fabio Estevam7891e252012-09-13 03:18:20 +000018
Otavio Salvador03ce3302014-01-06 13:27:20 -020019#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
20
Pierre Aubertc1747972013-06-04 09:00:15 +020021#include "mx6sabre_common.h"
Otavio Salvador51535d92012-09-26 11:37:01 +000022
Diego Dortad96796c2016-10-11 11:09:27 -030023/* Falcon Mode */
Tom Rinidec30302017-01-20 19:55:53 -050024#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
25#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
Diego Dortad96796c2016-10-11 11:09:27 -030026#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
Diego Dortad96796c2016-10-11 11:09:27 -030027
28/* Falcon Mode - MMC support: args@1MB kernel@2MB */
29#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
30#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
31#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
32
Shawn Guode7d02a2012-12-30 14:14:59 +000033#define CONFIG_SYS_FSL_USDHC_NUM 3
34#if defined(CONFIG_ENV_IS_IN_MMC)
Fabio Estevamacbb4452013-01-10 09:00:53 +000035#define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC3 */
Shawn Guode7d02a2012-12-30 14:14:59 +000036#endif
37
Marek Vasute919aa22014-03-23 22:45:41 +010038#ifdef CONFIG_CMD_PCI
Marek Vasute919aa22014-03-23 22:45:41 +010039#define CONFIG_PCI_SCAN_SHOW
40#define CONFIG_PCIE_IMX
41#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
42#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(3, 19)
43#endif
44
Fabio Estevam66ca09f2014-05-09 13:15:42 -030045/* I2C Configs */
Fabio Estevam66ca09f2014-05-09 13:15:42 -030046#define CONFIG_SYS_I2C
47#define CONFIG_SYS_I2C_MXC
Albert ARIBAUD \\(3ADEV\\)03544c62015-09-21 22:43:38 +020048#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
49#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
York Sunf8cb1012015-03-20 10:20:40 -070050#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
Fabio Estevam66ca09f2014-05-09 13:15:42 -030051#define CONFIG_SYS_I2C_SPEED 100000
52
53/* PMIC */
54#define CONFIG_POWER
55#define CONFIG_POWER_I2C
56#define CONFIG_POWER_PFUZE100
57#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
58
Peng Fan5a3d63c2014-12-02 09:55:27 +080059/* USB Configs */
Peng Fan5a3d63c2014-12-02 09:55:27 +080060#ifdef CONFIG_CMD_USB
Peng Fan5a3d63c2014-12-02 09:55:27 +080061#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
Peng Fan5a3d63c2014-12-02 09:55:27 +080062#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
63#define CONFIG_MXC_USB_FLAGS 0
64#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */
65#endif
66
Fabio Estevam258f76f2017-06-01 12:59:52 -030067#endif /* __MX6SABRESD_CONFIG_H */