blob: cd74bb471163be6667c7b9d3bdb8578d660d6c24 [file] [log] [blame]
Mason Huo7870a052023-07-25 17:46:48 +08001// SPDX-License-Identifier: GPL-2.0+
2/*
3 * PLDA XpressRich PCIe host controller common functions.
4 *
5 * Copyright (C) 2023 StarFive Technology Co., Ltd.
6 *
7 */
8
9#include <common.h>
10#include <clk.h>
11#include <dm.h>
12#include <pci.h>
13#include <pci_ids.h>
14#include <asm/global_data.h>
15#include <asm/io.h>
16#include <dm/device_compat.h>
17#include <linux/delay.h>
18#include <linux/iopoll.h>
19#include "pcie_plda_common.h"
20
21static bool plda_pcie_addr_valid(struct pcie_plda *plda, pci_dev_t bdf)
22{
23 /*
24 * Single device limitation.
25 * PCIe controller contain HW issue that secondary bus of
26 * host bridge emumerate duplicate devices.
27 * Only can access device 0 in secondary bus.
28 */
29 if (PCI_BUS(bdf) == plda->sec_busno && PCI_DEV(bdf) > 0)
30 return false;
31
32 return true;
33}
34
35static int plda_pcie_conf_address(const struct udevice *udev, pci_dev_t bdf,
36 uint offset, void **paddr)
37{
38 struct pcie_plda *priv = dev_get_priv(udev);
Minda Chen8d184d42023-08-07 16:53:35 +080039 int where = PCIE_ECAM_OFFSET(PCI_BUS(bdf) - dev_seq(udev),
40 PCI_DEV(bdf), PCI_FUNC(bdf), offset);
Mason Huo7870a052023-07-25 17:46:48 +080041
42 if (!plda_pcie_addr_valid(priv, bdf))
43 return -ENODEV;
44
45 *paddr = (void *)(priv->cfg_base + where);
46 return 0;
47}
48
49int plda_pcie_config_read(const struct udevice *udev, pci_dev_t bdf,
50 uint offset, ulong *valuep,
51 enum pci_size_t size)
52{
53 return pci_generic_mmap_read_config(udev, plda_pcie_conf_address,
54 bdf, offset, valuep, size);
55}
56
57int plda_pcie_config_write(struct udevice *udev, pci_dev_t bdf,
58 uint offset, ulong value,
59 enum pci_size_t size)
60{
61 struct pcie_plda *priv = dev_get_priv(udev);
62 int ret;
63
64 ret = pci_generic_mmap_write_config(udev, plda_pcie_conf_address,
65 bdf, offset, value, size);
66
67 /* record secondary bus number */
68 if (!ret && PCI_BUS(bdf) == dev_seq(udev) &&
69 PCI_DEV(bdf) == 0 && PCI_FUNC(bdf) == 0 &&
70 (offset == PCI_SECONDARY_BUS ||
71 (offset == PCI_PRIMARY_BUS && size != PCI_SIZE_8))) {
72 priv->sec_busno =
73 ((offset == PCI_PRIMARY_BUS) ? (value >> 8) : value) & 0xff;
Minda Chen8d184d42023-08-07 16:53:35 +080074 priv->sec_busno += dev_seq(udev);
Mason Huo7870a052023-07-25 17:46:48 +080075 debug("Secondary bus number was changed to %d\n",
76 priv->sec_busno);
77 }
78 return ret;
79}
80
81int plda_pcie_set_atr_entry(struct pcie_plda *plda, phys_addr_t src_addr,
82 phys_addr_t trsl_addr, phys_size_t window_size,
83 int trsl_param)
84{
85 void __iomem *base =
86 plda->reg_base + XR3PCI_ATR_AXI4_SLV0;
87
88 /* Support AXI4 Slave 0 Address Translation Tables 0-7. */
89 if (plda->atr_table_num >= XR3PCI_ATR_MAX_TABLE_NUM) {
90 dev_err(plda->dev, "ATR table number %d exceeds max num\n",
91 plda->atr_table_num);
92 return -EINVAL;
93 }
94 base += XR3PCI_ATR_TABLE_OFFSET * plda->atr_table_num;
95 plda->atr_table_num++;
96
97 /*
98 * X3PCI_ATR_SRC_ADDR_LOW:
99 * - bit 0: enable entry,
100 * - bits 1-6: ATR window size: total size in bytes: 2^(ATR_WSIZE + 1)
101 * - bits 7-11: reserved
102 * - bits 12-31: start of source address
103 */
104 writel((lower_32_bits(src_addr) & XR3PCI_ATR_SRC_ADDR_MASK) |
105 (fls(window_size) - 1) << XR3PCI_ATR_SRC_WIN_SIZE_SHIFT | 1,
106 base + XR3PCI_ATR_SRC_ADDR_LOW);
107 writel(upper_32_bits(src_addr), base + XR3PCI_ATR_SRC_ADDR_HIGH);
108 writel((lower_32_bits(trsl_addr) & XR3PCI_ATR_TRSL_ADDR_MASK),
109 base + XR3PCI_ATR_TRSL_ADDR_LOW);
110 writel(upper_32_bits(trsl_addr), base + XR3PCI_ATR_TRSL_ADDR_HIGH);
111 writel(trsl_param, base + XR3PCI_ATR_TRSL_PARAM);
112
113 dev_dbg(plda->dev, "ATR entry: 0x%010llx %s 0x%010llx [0x%010llx] (param: 0x%06x)\n",
114 src_addr, (trsl_param & XR3PCI_ATR_TRSL_DIR) ? "<-" : "->",
115 trsl_addr, (u64)window_size, trsl_param);
116 return 0;
117}