| Rick Chen | 410d129 | 2017-11-23 10:22:17 +0800 | [diff] [blame] | 1 | Andestech ATCPIT100 timer |
| 2 | ------------------------------------------------------------------ |
| 3 | ATCPIT100 is a generic IP block from Andes Technology, embedded in |
| 4 | Andestech AE3XX, AE250 platforms and other designs. |
| 5 | |
| 6 | This timer is a set of compact multi-function timers, which can be |
| 7 | used as pulse width modulators (PWM) as well as simple timers. |
| 8 | |
| 9 | It supports up to 4 PIT channels. Each PIT channel is a |
| 10 | multi-function timer and provide the following usage scenarios: |
| 11 | One 32-bit timer |
| 12 | Two 16-bit timers |
| 13 | Four 8-bit timers |
| 14 | One 16-bit PWM |
| 15 | One 16-bit timer and one 8-bit PWM |
| 16 | Two 8-bit timer and one 8-bit PWM |
| 17 | |
| 18 | Required properties: |
| 19 | - compatible : Should be "andestech,atcpit100" |
| 20 | - reg : Address and length of the register set |
| 21 | - interrupts : Reference to the timer interrupt |
| 22 | - clock-frequency : The rate in HZ in input of the Andestech ATCPIT100 timer |
| 23 | |
| 24 | Examples: |
| 25 | |
| 26 | timer0: timer@f0400000 { |
| 27 | compatible = "andestech,atcpit100"; |
| 28 | reg = <0xf0400000 0x1000>; |
| 29 | interrupts = <2 4>; |
| 30 | clock-frequency = <30000000>; |
| 31 | }: |