blob: 28dcb66ebc4bd3693b2ed183a9f4a783f99cfaa4 [file] [log] [blame]
Stefan Roese8a316c92005-08-01 16:49:12 +02001/*
2 * (C) Copyright 2000-2005
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24#include <common.h>
25#include <asm/processor.h>
26#include <spd_sdram.h>
27
28int board_early_init_f(void)
29{
30 /*-------------------------------------------------------------------------+
31 | Interrupt controller setup for the Walnut/Sycamore board.
32 | Note: IRQ 0-15 405GP internally generated; active high; level sensitive
33 | IRQ 16 405GP internally generated; active low; level sensitive
34 | IRQ 17-24 RESERVED
35 | IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
36 | IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
37 | IRQ 27 (EXT IRQ 2) Not Used
38 | IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
39 | IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
40 | IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
41 | IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
42 | Note for Walnut board:
43 | An interrupt taken for the FPGA (IRQ 25) indicates that either
44 | the Mouse, Keyboard, IRDA, or External Expansion caused the
45 | interrupt. The FPGA must be read to determine which device
46 | caused the interrupt. The default setting of the FPGA clears
47 |
48 +-------------------------------------------------------------------------*/
49
50 mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
51 mtdcr(uicer, 0x00000000); /* disable all ints */
52 mtdcr(uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */
53 mtdcr(uicpr, 0xFFFFFFE0); /* set int polarities */
54 mtdcr(uictr, 0x10000000); /* set int trigger levels */
55 mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
56 mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
57
58 /* set UART1 control to select CTS/RTS */
59#define FPGA_BRDC 0xF0300004
60 *(volatile char *)(FPGA_BRDC) |= 0x1;
61
62 return 0;
63}
64
65/*
66 * Check Board Identity:
67 */
68int checkboard(void)
69{
Wolfgang Denk77ddac92005-10-13 16:45:02 +020070 char *s = getenv("serial#");
Stefan Roese8a316c92005-08-01 16:49:12 +020071 uint pvr = get_pvr();
72
73 if (pvr == PVR_405GPR_RB) {
74 puts("Board: Sycamore - AMCC PPC405GPr Evaluation Board");
75 } else {
76 puts("Board: Walnut - AMCC PPC405GP Evaluation Board");
77 }
78
79 if (s != NULL) {
80 puts(", serial# ");
81 puts(s);
82 }
83 putc('\n');
84
85 return (0);
86}
87
88/*
Stefan Roese8a316c92005-08-01 16:49:12 +020089 * initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
90 * the necessary info for SDRAM controller configuration
91 */
Becky Bruce9973e3c2008-06-09 16:03:40 -050092phys_size_t initdram(int board_type)
Stefan Roese8a316c92005-08-01 16:49:12 +020093{
Wolfgang Denkd87080b2006-03-31 18:32:53 +020094 return spd_sdram();
Stefan Roese8a316c92005-08-01 16:49:12 +020095}