Giulio Benetti | 4ca28e9 | 2020-01-10 15:47:01 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright(C) 2019 |
| 4 | * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> |
| 5 | */ |
| 6 | |
| 7 | #include <common.h> |
| 8 | #include <clk.h> |
| 9 | #include <clk-uclass.h> |
| 10 | #include <dm.h> |
Simon Glass | f7ae49f | 2020-05-10 11:40:05 -0600 | [diff] [blame] | 11 | #include <log.h> |
Giulio Benetti | 4ca28e9 | 2020-01-10 15:47:01 +0100 | [diff] [blame] | 12 | #include <asm/arch/clock.h> |
| 13 | #include <asm/arch/imx-regs.h> |
| 14 | #include <dt-bindings/clock/imxrt1050-clock.h> |
| 15 | |
| 16 | #include "clk.h" |
| 17 | |
| 18 | static ulong imxrt1050_clk_get_rate(struct clk *clk) |
| 19 | { |
| 20 | struct clk *c; |
| 21 | int ret; |
| 22 | |
| 23 | debug("%s(#%lu)\n", __func__, clk->id); |
| 24 | |
| 25 | ret = clk_get_by_id(clk->id, &c); |
| 26 | if (ret) |
| 27 | return ret; |
| 28 | |
| 29 | return clk_get_rate(c); |
| 30 | } |
| 31 | |
| 32 | static ulong imxrt1050_clk_set_rate(struct clk *clk, ulong rate) |
| 33 | { |
| 34 | struct clk *c; |
| 35 | int ret; |
| 36 | |
| 37 | debug("%s(#%lu), rate: %lu\n", __func__, clk->id, rate); |
| 38 | |
| 39 | ret = clk_get_by_id(clk->id, &c); |
| 40 | if (ret) |
| 41 | return ret; |
| 42 | |
| 43 | return clk_set_rate(c, rate); |
| 44 | } |
| 45 | |
| 46 | static int __imxrt1050_clk_enable(struct clk *clk, bool enable) |
| 47 | { |
| 48 | struct clk *c; |
| 49 | int ret; |
| 50 | |
| 51 | debug("%s(#%lu) en: %d\n", __func__, clk->id, enable); |
| 52 | |
| 53 | ret = clk_get_by_id(clk->id, &c); |
| 54 | if (ret) |
| 55 | return ret; |
| 56 | |
| 57 | if (enable) |
| 58 | ret = clk_enable(c); |
| 59 | else |
| 60 | ret = clk_disable(c); |
| 61 | |
| 62 | return ret; |
| 63 | } |
| 64 | |
| 65 | static int imxrt1050_clk_disable(struct clk *clk) |
| 66 | { |
| 67 | return __imxrt1050_clk_enable(clk, 0); |
| 68 | } |
| 69 | |
| 70 | static int imxrt1050_clk_enable(struct clk *clk) |
| 71 | { |
| 72 | return __imxrt1050_clk_enable(clk, 1); |
| 73 | } |
| 74 | |
Giulio Benetti | ecd8497 | 2020-04-08 17:10:10 +0200 | [diff] [blame] | 75 | static int imxrt1050_clk_set_parent(struct clk *clk, struct clk *parent) |
| 76 | { |
| 77 | struct clk *c, *cp; |
| 78 | int ret; |
| 79 | |
| 80 | debug("%s(#%lu), parent: %lu\n", __func__, clk->id, parent->id); |
| 81 | |
| 82 | ret = clk_get_by_id(clk->id, &c); |
| 83 | if (ret) |
| 84 | return ret; |
| 85 | |
| 86 | ret = clk_get_by_id(parent->id, &cp); |
| 87 | if (ret) |
| 88 | return ret; |
| 89 | |
| 90 | return clk_set_parent(c, cp); |
| 91 | } |
| 92 | |
Giulio Benetti | 4ca28e9 | 2020-01-10 15:47:01 +0100 | [diff] [blame] | 93 | static struct clk_ops imxrt1050_clk_ops = { |
| 94 | .set_rate = imxrt1050_clk_set_rate, |
| 95 | .get_rate = imxrt1050_clk_get_rate, |
| 96 | .enable = imxrt1050_clk_enable, |
| 97 | .disable = imxrt1050_clk_disable, |
Giulio Benetti | ecd8497 | 2020-04-08 17:10:10 +0200 | [diff] [blame] | 98 | .set_parent = imxrt1050_clk_set_parent, |
Giulio Benetti | 4ca28e9 | 2020-01-10 15:47:01 +0100 | [diff] [blame] | 99 | }; |
| 100 | |
| 101 | static const char * const pll_ref_sels[] = {"osc", "dummy", }; |
| 102 | static const char * const pll1_bypass_sels[] = {"pll1_arm", "pll1_arm_ref_sel", }; |
| 103 | static const char * const pll2_bypass_sels[] = {"pll2_sys", "pll2_sys_ref_sel", }; |
| 104 | static const char * const pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", }; |
| 105 | static const char * const pll5_bypass_sels[] = {"pll5_video", "pll5_video_ref_sel", }; |
| 106 | |
| 107 | static const char *const pre_periph_sels[] = { "pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m", "arm_podf", }; |
| 108 | static const char *const periph_sels[] = { "pre_periph_sel", "todo", }; |
| 109 | static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; |
| 110 | static const char *const lpuart_sels[] = { "pll3_80m", "osc", }; |
| 111 | static const char *const semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", }; |
| 112 | static const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", }; |
Giulio Benetti | d303f9c | 2020-04-08 17:10:08 +0200 | [diff] [blame] | 113 | static const char *const lcdif_sels[] = { "pll2_sys", "pll3_pfd3_454_74m", "pll5_video", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_664_62m"}; |
Giulio Benetti | 4ca28e9 | 2020-01-10 15:47:01 +0100 | [diff] [blame] | 114 | |
| 115 | static int imxrt1050_clk_probe(struct udevice *dev) |
| 116 | { |
| 117 | void *base; |
| 118 | |
| 119 | /* Anatop clocks */ |
| 120 | base = (void *)ANATOP_BASE_ADDR; |
| 121 | |
| 122 | clk_dm(IMXRT1050_CLK_PLL1_REF_SEL, |
| 123 | imx_clk_mux("pll1_arm_ref_sel", base + 0x0, 14, 2, |
| 124 | pll_ref_sels, ARRAY_SIZE(pll_ref_sels))); |
| 125 | clk_dm(IMXRT1050_CLK_PLL2_REF_SEL, |
| 126 | imx_clk_mux("pll2_sys_ref_sel", base + 0x30, 14, 2, |
| 127 | pll_ref_sels, ARRAY_SIZE(pll_ref_sels))); |
| 128 | clk_dm(IMXRT1050_CLK_PLL3_REF_SEL, |
| 129 | imx_clk_mux("pll3_usb_otg_ref_sel", base + 0x10, 14, 2, |
| 130 | pll_ref_sels, ARRAY_SIZE(pll_ref_sels))); |
| 131 | clk_dm(IMXRT1050_CLK_PLL5_REF_SEL, |
| 132 | imx_clk_mux("pll5_video_ref_sel", base + 0xa0, 14, 2, |
| 133 | pll_ref_sels, ARRAY_SIZE(pll_ref_sels))); |
| 134 | |
| 135 | clk_dm(IMXRT1050_CLK_PLL1_ARM, |
| 136 | imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_arm", "pll1_arm_ref_sel", |
| 137 | base + 0x0, 0x7f)); |
| 138 | clk_dm(IMXRT1050_CLK_PLL2_SYS, |
| 139 | imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_sys", "pll2_sys_ref_sel", |
| 140 | base + 0x30, 0x1)); |
| 141 | clk_dm(IMXRT1050_CLK_PLL3_USB_OTG, |
| 142 | imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", |
| 143 | "pll3_usb_otg_ref_sel", |
| 144 | base + 0x10, 0x1)); |
| 145 | clk_dm(IMXRT1050_CLK_PLL5_VIDEO, |
| 146 | imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "pll5_video_ref_sel", |
| 147 | base + 0xa0, 0x7f)); |
| 148 | |
| 149 | /* PLL bypass out */ |
| 150 | clk_dm(IMXRT1050_CLK_PLL1_BYPASS, |
| 151 | imx_clk_mux_flags("pll1_bypass", base + 0x0, 16, 1, |
| 152 | pll1_bypass_sels, |
| 153 | ARRAY_SIZE(pll1_bypass_sels), |
| 154 | CLK_SET_RATE_PARENT)); |
| 155 | clk_dm(IMXRT1050_CLK_PLL2_BYPASS, |
| 156 | imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, |
| 157 | pll2_bypass_sels, |
| 158 | ARRAY_SIZE(pll2_bypass_sels), |
| 159 | CLK_SET_RATE_PARENT)); |
| 160 | clk_dm(IMXRT1050_CLK_PLL3_BYPASS, |
| 161 | imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, |
| 162 | pll3_bypass_sels, |
| 163 | ARRAY_SIZE(pll3_bypass_sels), |
| 164 | CLK_SET_RATE_PARENT)); |
| 165 | clk_dm(IMXRT1050_CLK_PLL5_BYPASS, |
| 166 | imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, |
| 167 | pll5_bypass_sels, |
| 168 | ARRAY_SIZE(pll5_bypass_sels), |
| 169 | CLK_SET_RATE_PARENT)); |
| 170 | |
| 171 | clk_dm(IMXRT1050_CLK_VIDEO_POST_DIV_SEL, |
| 172 | imx_clk_divider("video_post_div_sel", "pll5_video", |
| 173 | base + 0xa0, 19, 2)); |
| 174 | clk_dm(IMXRT1050_CLK_VIDEO_DIV, |
| 175 | imx_clk_divider("video_div", "video_post_div_sel", |
| 176 | base + 0x170, 30, 2)); |
| 177 | |
| 178 | clk_dm(IMXRT1050_CLK_PLL3_80M, |
| 179 | imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6)); |
| 180 | |
| 181 | clk_dm(IMXRT1050_CLK_PLL2_PFD0_352M, |
| 182 | imx_clk_pfd("pll2_pfd0_352m", "pll2_sys", base + 0x100, 0)); |
| 183 | clk_dm(IMXRT1050_CLK_PLL2_PFD1_594M, |
| 184 | imx_clk_pfd("pll2_pfd1_594m", "pll2_sys", base + 0x100, 1)); |
| 185 | clk_dm(IMXRT1050_CLK_PLL2_PFD2_396M, |
| 186 | imx_clk_pfd("pll2_pfd2_396m", "pll2_sys", base + 0x100, 2)); |
| 187 | clk_dm(IMXRT1050_CLK_PLL3_PFD1_664_62M, |
| 188 | imx_clk_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base + 0xf0, |
| 189 | 1)); |
| 190 | clk_dm(IMXRT1050_CLK_PLL3_PFD3_454_74M, |
| 191 | imx_clk_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base + 0xf0, |
| 192 | 3)); |
| 193 | |
| 194 | /* CCM clocks */ |
| 195 | base = dev_read_addr_ptr(dev); |
| 196 | if (base == (void *)FDT_ADDR_T_NONE) |
| 197 | return -EINVAL; |
| 198 | |
| 199 | clk_dm(IMXRT1050_CLK_ARM_PODF, |
| 200 | imx_clk_divider("arm_podf", "pll1_arm", |
| 201 | base + 0x10, 0, 3)); |
| 202 | |
| 203 | clk_dm(IMXRT1050_CLK_PRE_PERIPH_SEL, |
| 204 | imx_clk_mux("pre_periph_sel", base + 0x18, 18, 2, |
| 205 | pre_periph_sels, ARRAY_SIZE(pre_periph_sels))); |
| 206 | clk_dm(IMXRT1050_CLK_PERIPH_SEL, |
| 207 | imx_clk_mux("periph_sel", base + 0x14, 25, 1, |
| 208 | periph_sels, ARRAY_SIZE(periph_sels))); |
| 209 | clk_dm(IMXRT1050_CLK_USDHC1_SEL, |
| 210 | imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, |
| 211 | usdhc_sels, ARRAY_SIZE(usdhc_sels))); |
| 212 | clk_dm(IMXRT1050_CLK_USDHC2_SEL, |
| 213 | imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, |
| 214 | usdhc_sels, ARRAY_SIZE(usdhc_sels))); |
| 215 | clk_dm(IMXRT1050_CLK_LPUART_SEL, |
| 216 | imx_clk_mux("lpuart_sel", base + 0x24, 6, 1, |
| 217 | lpuart_sels, ARRAY_SIZE(lpuart_sels))); |
| 218 | clk_dm(IMXRT1050_CLK_SEMC_ALT_SEL, |
| 219 | imx_clk_mux("semc_alt_sel", base + 0x14, 7, 1, |
| 220 | semc_alt_sels, ARRAY_SIZE(semc_alt_sels))); |
| 221 | clk_dm(IMXRT1050_CLK_SEMC_SEL, |
| 222 | imx_clk_mux("semc_sel", base + 0x14, 6, 1, |
| 223 | semc_sels, ARRAY_SIZE(semc_sels))); |
| 224 | clk_dm(IMXRT1050_CLK_LCDIF_SEL, |
| 225 | imx_clk_mux("lcdif_sel", base + 0x38, 15, 3, |
| 226 | lcdif_sels, ARRAY_SIZE(lcdif_sels))); |
| 227 | |
| 228 | clk_dm(IMXRT1050_CLK_AHB_PODF, |
| 229 | imx_clk_divider("ahb_podf", "periph_sel", |
| 230 | base + 0x14, 10, 3)); |
| 231 | clk_dm(IMXRT1050_CLK_USDHC1_PODF, |
| 232 | imx_clk_divider("usdhc1_podf", "usdhc1_sel", |
| 233 | base + 0x24, 11, 3)); |
| 234 | clk_dm(IMXRT1050_CLK_USDHC2_PODF, |
| 235 | imx_clk_divider("usdhc2_podf", "usdhc2_sel", |
| 236 | base + 0x24, 16, 3)); |
| 237 | clk_dm(IMXRT1050_CLK_LPUART_PODF, |
| 238 | imx_clk_divider("lpuart_podf", "lpuart_sel", |
| 239 | base + 0x24, 0, 6)); |
| 240 | clk_dm(IMXRT1050_CLK_SEMC_PODF, |
| 241 | imx_clk_divider("semc_podf", "semc_sel", |
| 242 | base + 0x14, 16, 3)); |
| 243 | clk_dm(IMXRT1050_CLK_LCDIF_PRED, |
| 244 | imx_clk_divider("lcdif_pred", "lcdif_sel", |
| 245 | base + 0x38, 12, 3)); |
| 246 | clk_dm(IMXRT1050_CLK_LCDIF_PODF, |
| 247 | imx_clk_divider("lcdif_podf", "lcdif_pred", |
| 248 | base + 0x18, 23, 3)); |
| 249 | |
| 250 | clk_dm(IMXRT1050_CLK_USDHC1, |
| 251 | imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2)); |
| 252 | clk_dm(IMXRT1050_CLK_USDHC2, |
| 253 | imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4)); |
| 254 | clk_dm(IMXRT1050_CLK_LPUART1, |
| 255 | imx_clk_gate2("lpuart1", "lpuart_podf", base + 0x7c, 24)); |
| 256 | clk_dm(IMXRT1050_CLK_SEMC, |
| 257 | imx_clk_gate2("semc", "semc_podf", base + 0x74, 4)); |
Giulio Benetti | f544dfe | 2021-05-13 12:19:33 +0200 | [diff] [blame^] | 258 | clk_dm(IMXRT1050_CLK_LCDIF_APB, |
| 259 | imx_clk_gate2("lcdif", "lcdif_podf", base + 0x70, 28)); |
| 260 | clk_dm(IMXRT1050_CLK_LCDIF_PIX, |
| 261 | imx_clk_gate2("lcdif_pix", "lcdif", base + 0x74, 10)); |
Giulio Benetti | 4ca28e9 | 2020-01-10 15:47:01 +0100 | [diff] [blame] | 262 | |
Giulio Benetti | 4ca28e9 | 2020-01-10 15:47:01 +0100 | [diff] [blame] | 263 | struct clk *clk, *clk1; |
| 264 | |
Giulio Benetti | caac71b | 2020-04-08 17:10:09 +0200 | [diff] [blame] | 265 | #ifdef CONFIG_SPL_BUILD |
Giulio Benetti | 4ca28e9 | 2020-01-10 15:47:01 +0100 | [diff] [blame] | 266 | /* bypass pll1 before setting its rate */ |
| 267 | clk_get_by_id(IMXRT1050_CLK_PLL1_REF_SEL, &clk); |
| 268 | clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1); |
| 269 | clk_set_parent(clk1, clk); |
| 270 | |
| 271 | clk_get_by_id(IMXRT1050_CLK_PLL1_ARM, &clk); |
| 272 | clk_enable(clk); |
| 273 | clk_set_rate(clk, 1056000000UL); |
| 274 | |
| 275 | clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1); |
| 276 | clk_set_parent(clk1, clk); |
| 277 | |
| 278 | clk_get_by_id(IMXRT1050_CLK_SEMC_SEL, &clk1); |
| 279 | clk_get_by_id(IMXRT1050_CLK_SEMC_ALT_SEL, &clk); |
| 280 | clk_set_parent(clk1, clk); |
| 281 | |
| 282 | clk_get_by_id(IMXRT1050_CLK_PLL2_SYS, &clk); |
| 283 | clk_enable(clk); |
| 284 | clk_set_rate(clk, 528000000UL); |
| 285 | |
| 286 | clk_get_by_id(IMXRT1050_CLK_PLL2_BYPASS, &clk1); |
| 287 | clk_set_parent(clk1, clk); |
| 288 | |
| 289 | /* Configure PLL3_USB_OTG to 480MHz */ |
| 290 | clk_get_by_id(IMXRT1050_CLK_PLL3_USB_OTG, &clk); |
| 291 | clk_enable(clk); |
| 292 | clk_set_rate(clk, 480000000UL); |
| 293 | |
| 294 | clk_get_by_id(IMXRT1050_CLK_PLL3_BYPASS, &clk1); |
| 295 | clk_set_parent(clk1, clk); |
Giulio Benetti | caac71b | 2020-04-08 17:10:09 +0200 | [diff] [blame] | 296 | #else |
| 297 | /* Set PLL5 for LCDIF to its default 650Mhz */ |
| 298 | clk_get_by_id(IMXRT1050_CLK_PLL5_VIDEO, &clk); |
| 299 | clk_enable(clk); |
| 300 | clk_set_rate(clk, 650000000UL); |
Giulio Benetti | 4ca28e9 | 2020-01-10 15:47:01 +0100 | [diff] [blame] | 301 | |
Giulio Benetti | caac71b | 2020-04-08 17:10:09 +0200 | [diff] [blame] | 302 | clk_get_by_id(IMXRT1050_CLK_PLL5_BYPASS, &clk1); |
| 303 | clk_set_parent(clk1, clk); |
Giulio Benetti | 4ca28e9 | 2020-01-10 15:47:01 +0100 | [diff] [blame] | 304 | #endif |
| 305 | |
| 306 | return 0; |
| 307 | } |
| 308 | |
| 309 | static const struct udevice_id imxrt1050_clk_ids[] = { |
| 310 | { .compatible = "fsl,imxrt1050-ccm" }, |
| 311 | { }, |
| 312 | }; |
| 313 | |
| 314 | U_BOOT_DRIVER(imxrt1050_clk) = { |
| 315 | .name = "clk_imxrt1050", |
| 316 | .id = UCLASS_CLK, |
| 317 | .of_match = imxrt1050_clk_ids, |
| 318 | .ops = &imxrt1050_clk_ops, |
| 319 | .probe = imxrt1050_clk_probe, |
| 320 | .flags = DM_FLAG_PRE_RELOC, |
| 321 | }; |