blob: 4703098149590df0487ff13d3744d1d47145dc70 [file] [log] [blame]
Mike Frysinger8b219cf2008-10-12 21:54:07 -04001/*
2 * video.c - run splash screen on lcd
3 *
4 * Copyright (c) 2007-2008 Analog Devices Inc.
5 *
6 * Licensed under the GPL-2 or later.
7 */
8
9#include <stdarg.h>
10#include <common.h>
11#include <config.h>
12#include <malloc.h>
13#include <asm/blackfin.h>
Mike Frysingerb14fff82010-06-02 19:30:15 -040014#include <asm/gpio.h>
15#include <asm/portmux.h>
Mike Frysinger8b219cf2008-10-12 21:54:07 -040016#include <asm/mach-common/bits/dma.h>
17#include <i2c.h>
18#include <linux/types.h>
Mike Frysingercb95c7a2009-09-02 05:52:37 -040019#include <stdio_dev.h>
Mike Frysinger8b219cf2008-10-12 21:54:07 -040020
Mike Frysinger8b219cf2008-10-12 21:54:07 -040021#ifdef CONFIG_VIDEO
22
23#define DMA_SIZE16 2
24
25#include <asm/mach-common/bits/eppi.h>
26
27#include <asm/bfin_logo_230x230.h>
28
29#define LCD_X_RES 480 /*Horizontal Resolution */
30#define LCD_Y_RES 272 /* Vertical Resolution */
31
32#define LCD_BPP 24 /* Bit Per Pixel */
33#define LCD_PIXEL_SIZE (LCD_BPP / 8)
34#define DMA_BUS_SIZE 32
35#define ACTIVE_VIDEO_MEM_OFFSET 0
36
37/* -- Horizontal synchronizing --
38 *
39 * Timing characteristics taken from the SHARP LQ043T1DG01 datasheet
40 * (LCY-W-06602A Page 9 of 22)
41 *
42 * Clock Frequency 1/Tc Min 7.83 Typ 9.00 Max 9.26 MHz
43 *
44 * Period TH - 525 - Clock
45 * Pulse width THp - 41 - Clock
46 * Horizontal period THd - 480 - Clock
47 * Back porch THb - 2 - Clock
48 * Front porch THf - 2 - Clock
49 *
50 * -- Vertical synchronizing --
51 * Period TV - 286 - Line
52 * Pulse width TVp - 10 - Line
53 * Vertical period TVd - 272 - Line
54 * Back porch TVb - 2 - Line
55 * Front porch TVf - 2 - Line
56 */
57
58#define LCD_CLK (8*1000*1000) /* 8MHz */
59
60/* # active data to transfer after Horizontal Delay clock */
61#define EPPI_HCOUNT LCD_X_RES
62
63/* # active lines to transfer after Vertical Delay clock */
64#define EPPI_VCOUNT LCD_Y_RES
65
66/* Samples per Line = 480 (active data) + 45 (padding) */
67#define EPPI_LINE 525
68
69/* Lines per Frame = 272 (active data) + 14 (padding) */
70#define EPPI_FRAME 286
71
72/* FS1 (Hsync) Width (Typical)*/
73#define EPPI_FS1W_HBL 41
74
75/* FS1 (Hsync) Period (Typical) */
76#define EPPI_FS1P_AVPL EPPI_LINE
77
78/* Horizontal Delay clock after assertion of Hsync (Typical) */
79#define EPPI_HDELAY 43
80
81/* FS2 (Vsync) Width = FS1 (Hsync) Period * 10 */
82#define EPPI_FS2W_LVB (EPPI_LINE * 10)
83
84 /* FS2 (Vsync) Period = FS1 (Hsync) Period * Lines per Frame */
85#define EPPI_FS2P_LAVF (EPPI_LINE * EPPI_FRAME)
86
87/* Vertical Delay after assertion of Vsync (2 Lines) */
88#define EPPI_VDELAY 12
89
90#define EPPI_CLIP 0xFF00FF00
91
92/* EPPI Control register configuration value for RGB out
93 * - EPPI as Output
94 * GP 2 frame sync mode,
95 * Internal Clock generation disabled, Internal FS generation enabled,
96 * Receives samples on EPPI_CLK raising edge, Transmits samples on EPPI_CLK falling edge,
97 * FS1 & FS2 are active high,
98 * DLEN = 6 (24 bits for RGB888 out) or 5 (18 bits for RGB666 out)
99 * DMA Unpacking disabled when RGB Formating is enabled, otherwise DMA unpacking enabled
100 * Swapping Enabled,
101 * One (DMA) Channel Mode,
102 * RGB Formatting Enabled for RGB666 output, disabled for RGB888 output
103 * Regular watermark - when FIFO is 100% full,
104 * Urgent watermark - when FIFO is 75% full
105 */
106
107#define EPPI_CONTROL (0x20136E2E)
108
109static inline u16 get_eppi_clkdiv(u32 target_ppi_clk)
110{
111 u32 sclk = get_sclk();
112
113 /* EPPI_CLK = (SCLK) / (2 * (EPPI_CLKDIV[15:0] + 1)) */
114
115 return (((sclk / target_ppi_clk) / 2) - 1);
116}
117
118void Init_PPI(void)
119{
120 u16 eppi_clkdiv = get_eppi_clkdiv(LCD_CLK);
121
122 bfin_write_EPPI0_FS1W_HBL(EPPI_FS1W_HBL);
123 bfin_write_EPPI0_FS1P_AVPL(EPPI_FS1P_AVPL);
124 bfin_write_EPPI0_FS2W_LVB(EPPI_FS2W_LVB);
125 bfin_write_EPPI0_FS2P_LAVF(EPPI_FS2P_LAVF);
126 bfin_write_EPPI0_CLIP(EPPI_CLIP);
127
128 bfin_write_EPPI0_FRAME(EPPI_FRAME);
129 bfin_write_EPPI0_LINE(EPPI_LINE);
130
131 bfin_write_EPPI0_HCOUNT(EPPI_HCOUNT);
132 bfin_write_EPPI0_HDELAY(EPPI_HDELAY);
133 bfin_write_EPPI0_VCOUNT(EPPI_VCOUNT);
134 bfin_write_EPPI0_VDELAY(EPPI_VDELAY);
135
136 bfin_write_EPPI0_CLKDIV(eppi_clkdiv);
137
138/*
139 * DLEN = 6 (24 bits for RGB888 out) or 5 (18 bits for RGB666 out)
140 * RGB Formatting Enabled for RGB666 output, disabled for RGB888 output
141 */
142#if defined(CONFIG_VIDEO_RGB666)
143 bfin_write_EPPI0_CONTROL((EPPI_CONTROL & ~DLENGTH) | DLEN_18 |
144 RGB_FMT_EN);
145#else
146 bfin_write_EPPI0_CONTROL(((EPPI_CONTROL & ~DLENGTH) | DLEN_24) &
147 ~RGB_FMT_EN);
148#endif
149
150}
151
152#define DEB2_URGENT 0x2000 /* DEB2 Urgent */
153
154void Init_DMA(void *dst)
155{
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400156#if defined(CONFIG_DEB_DMA_URGENT)
Mike Frysinger51821862010-07-25 17:19:16 -0400157 bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() | DEB2_URGENT);
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400158#endif
159
Mike Frysinger51821862010-07-25 17:19:16 -0400160 bfin_write_DMA12_START_ADDR(dst);
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400161
162 /* X count */
Mike Frysinger51821862010-07-25 17:19:16 -0400163 bfin_write_DMA12_X_COUNT((LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE);
164 bfin_write_DMA12_X_MODIFY(DMA_BUS_SIZE / 8);
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400165
166 /* Y count */
Mike Frysinger51821862010-07-25 17:19:16 -0400167 bfin_write_DMA12_Y_COUNT(LCD_Y_RES);
168 bfin_write_DMA12_Y_MODIFY(DMA_BUS_SIZE / 8);
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400169
170 /* DMA Config */
Mike Frysinger51821862010-07-25 17:19:16 -0400171 bfin_write_DMA12_CONFIG(
172 WDSIZE_32 | /* 32 bit DMA */
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400173 DMA2D | /* 2D DMA */
Mike Frysinger51821862010-07-25 17:19:16 -0400174 FLOW_AUTO /* autobuffer mode */
175 );
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400176}
177
178void Init_Ports(void)
179{
Mike Frysingerb14fff82010-06-02 19:30:15 -0400180 const unsigned short pins[] = {
181 P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, P_PPI0_D4,
182 P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, P_PPI0_D8, P_PPI0_D9,
183 P_PPI0_D10, P_PPI0_D11, P_PPI0_D12, P_PPI0_D13, P_PPI0_D14,
184 P_PPI0_D15, P_PPI0_D16, P_PPI0_D17,
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400185#if !defined(CONFIG_VIDEO_RGB666)
Mike Frysingerb14fff82010-06-02 19:30:15 -0400186 P_PPI0_D18, P_PPI0_D19, P_PPI0_D20, P_PPI0_D21, P_PPI0_D22,
187 P_PPI0_D23,
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400188#endif
Mike Frysingerb14fff82010-06-02 19:30:15 -0400189 P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, 0,
190 };
191 peripheral_request_list(pins, "lcd");
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400192
Mike Frysingerb14fff82010-06-02 19:30:15 -0400193 gpio_request(GPIO_PE3, "lcd-disp");
194 gpio_direction_output(GPIO_PE3, 1);
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400195}
196
197void EnableDMA(void)
198{
Mike Frysinger51821862010-07-25 17:19:16 -0400199 bfin_write_DMA12_CONFIG(bfin_read_DMA12_CONFIG() | DMAEN);
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400200}
201
202void DisableDMA(void)
203{
Mike Frysinger51821862010-07-25 17:19:16 -0400204 bfin_write_DMA12_CONFIG(bfin_read_DMA12_CONFIG() & ~DMAEN);
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400205}
206
207/* enable and disable PPI functions */
208void EnablePPI(void)
209{
210 bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
211}
212
213void DisablePPI(void)
214{
215 bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() & ~EPPI_EN);
216}
217
218int video_init(void *dst)
219{
220 Init_Ports();
221 Init_DMA(dst);
222 EnableDMA();
223 Init_PPI();
224 EnablePPI();
225
226 return 0;
227}
228
Michael Hennerich5fc564e2009-08-07 02:47:54 +0000229void video_stop(void)
230{
231 DisablePPI();
232 DisableDMA();
233}
234
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400235static void dma_bitblit(void *dst, fastimage_t *logo, int x, int y)
236{
237 if (dcache_status())
238 blackfin_dcache_flush_range(logo->data,
239 logo->data + logo->size);
240
241 bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
242
243 /* Setup destination start address */
244 bfin_write_MDMA_D0_START_ADDR(dst + ((x & -2) * LCD_PIXEL_SIZE)
245 + (y * LCD_X_RES * LCD_PIXEL_SIZE));
246 /* Setup destination xcount */
247 bfin_write_MDMA_D0_X_COUNT(logo->width * LCD_PIXEL_SIZE / DMA_SIZE16);
248 /* Setup destination xmodify */
249 bfin_write_MDMA_D0_X_MODIFY(DMA_SIZE16);
250
251 /* Setup destination ycount */
252 bfin_write_MDMA_D0_Y_COUNT(logo->height);
253 /* Setup destination ymodify */
254 bfin_write_MDMA_D0_Y_MODIFY((LCD_X_RES - logo->width) * LCD_PIXEL_SIZE +
255 DMA_SIZE16);
256
257 /* Setup Source start address */
258 bfin_write_MDMA_S0_START_ADDR(logo->data);
259 /* Setup Source xcount */
260 bfin_write_MDMA_S0_X_COUNT(logo->width * LCD_PIXEL_SIZE / DMA_SIZE16);
261 /* Setup Source xmodify */
262 bfin_write_MDMA_S0_X_MODIFY(DMA_SIZE16);
263
264 /* Setup Source ycount */
265 bfin_write_MDMA_S0_Y_COUNT(logo->height);
266 /* Setup Source ymodify */
267 bfin_write_MDMA_S0_Y_MODIFY(DMA_SIZE16);
268
269 /* Enable source DMA */
270 bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16 | DMA2D);
271 SSYNC();
272 bfin_write_MDMA_D0_CONFIG(WNR | DMAEN | WDSIZE_16 | DMA2D);
273
274 while (bfin_read_MDMA_D0_IRQ_STATUS() & DMA_RUN) ;
275
276 bfin_write_MDMA_S0_IRQ_STATUS(bfin_read_MDMA_S0_IRQ_STATUS() | DMA_DONE
277 | DMA_ERR);
278 bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() | DMA_DONE
279 | DMA_ERR);
280
281}
282
283void video_putc(const char c)
284{
285}
286
287void video_puts(const char *s)
288{
289}
290
291int drv_video_init(void)
292{
293 int error, devices = 1;
Mike Frysingercb95c7a2009-09-02 05:52:37 -0400294 struct stdio_dev videodev;
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400295
296 u8 *dst;
297 u32 fbmem_size =
298 LCD_X_RES * LCD_Y_RES * LCD_PIXEL_SIZE + ACTIVE_VIDEO_MEM_OFFSET;
299
300 dst = malloc(fbmem_size);
301
302 if (dst == NULL) {
303 printf("Failed to alloc FB memory\n");
304 return -1;
305 }
306#ifdef EASYLOGO_ENABLE_GZIP
307 unsigned char *data = EASYLOGO_DECOMP_BUFFER;
308 unsigned long src_len = EASYLOGO_ENABLE_GZIP;
309 if (gunzip(data, bfin_logo.size, bfin_logo.data, &src_len)) {
310 puts("Failed to decompress logo\n");
311 free(dst);
312 return -1;
313 }
314 bfin_logo.data = data;
315#endif
316
317 memset(dst + ACTIVE_VIDEO_MEM_OFFSET, bfin_logo.data[0],
318 fbmem_size - ACTIVE_VIDEO_MEM_OFFSET);
319
320 dma_bitblit(dst + ACTIVE_VIDEO_MEM_OFFSET, &bfin_logo,
321 (LCD_X_RES - bfin_logo.width) / 2,
322 (LCD_Y_RES - bfin_logo.height) / 2);
323
324 video_init(dst); /* Video initialization */
325
326 memset(&videodev, 0, sizeof(videodev));
327
328 strcpy(videodev.name, "video");
329 videodev.ext = DEV_EXT_VIDEO; /* Video extensions */
330 videodev.flags = DEV_FLAGS_SYSTEM; /* No Output */
331 videodev.putc = video_putc; /* 'putc' function */
332 videodev.puts = video_puts; /* 'puts' function */
333
Mike Frysingercb95c7a2009-09-02 05:52:37 -0400334 error = stdio_register(&videodev);
Mike Frysinger8b219cf2008-10-12 21:54:07 -0400335
336 return (error == 0) ? devices : error;
337}
338
339#endif