blob: 6883e79e371354e036e781b55b14c8dcb5c51128 [file] [log] [blame]
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +02001/*
2 * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
3 *
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License as
6 * published by the Free Software Foundation; either version 2 of
7 * the License, or (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
17 * MA 02111-1307 USA
18 */
19
20#ifndef __CONFIG_H
21#define __CONFIG_H
22
23#if 0
24#define DEBUG
25#endif
26
27#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
28
29/*-----------------------------------------------------------------------
30 * User configurable settings:
31 * Mandatory settings:
32 * CONFIG_IPADDR_LS - the IP address of the LinkStation
33 * CONFIG_SERVERIP_LS - the address of the server for NFS/TFTP/DHCP/BOOTP
34 * Optional settins:
35 * CONFIG_NCIP_LS - the adress of the computer running net console
36 * if not configured, it will be set to
37 * CONFIG_SERVERIP_LS
38 */
39
40
41#define CONFIG_IPADDR_LS 192.168.11.150
42#define CONFIG_SERVERIP_LS 192.168.11.149
43
44#if !defined(CONFIG_IPADDR_LS) || !defined(CONFIG_SERVERIP_LS)
45#error Both CONFIG_IPADDR_LS and CONFIG_SERVERIP_LS must be defined
46#endif
47
48#if !defined(CONFIG_NCIP_LS)
49#define CONFIG_NCIP_LS CONFIG_SERVERIP_LS
50#endif
51
52/*----------------------------------------------------------------------
53 * DO NOT CHANGE ANYTHING BELOW, UNLESS YOU KNOW WHAT YOU ARE DOING
54 *---------------------------------------------------------------------*/
55
56#define CONFIG_MPC8245 1
57#define CONFIG_LINKSTATION 1
58
59/*---------------------------------------
60 * Supported models
61 *
62 * LinkStation HDLAN /KuroBox Standard (CONFIG_HLAN)
63 * LinkStation old model (CONFIG_LAN) - totally untested
64 * LinkStation HGLAN / KuroBox HG (CONFIG_HGLAN)
65 *
66 * Models not supported yet
67 * TeraStatin (CONFIG_HTGL)
68 */
69
70#if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
71#define CONFIG_IDENT_STRING " LinkStation / KuroBox"
72#elif defined(CONFIG_HGLAN)
73#define CONFIG_IDENT_STRING " LinkStation HG / KuroBox HG"
74#elif defined(CONFIG_HTGL)
75#define CONFIG_IDENT_STRING " TeraStation"
76#else
77#error No LinkStation model defined
78#endif
79
80#define CONFIG_BOOTDELAY 5
81#define CONFIG_ZERO_BOOTDELAY_CHECK
82#undef CONFIG_BOOT_RETRY_TIME
83
84#define CONFIG_AUTOBOOT_KEYED
Wolfgang Denkc37207d2008-07-16 16:38:59 +020085#define CONFIG_AUTOBOOT_PROMPT \
86 "Boot in %02d seconds ('s' to stop)...", bootdelay
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +020087#define CONFIG_AUTOBOOT_STOP_STR "s"
88
89#define CONFIG_CMD_IDE
90#define CONFIG_CMD_PCI
91#define CONFIG_CMD_DHCP
92#define CONFIG_CMD_PING
93#define CONFIG_CMD_EXT2
94
95#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL
96
97#define CONFIG_OF_LIBFDT 1
98
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +020099#define OF_STDOUT_PATH "/soc10x/serial@80004600"
100
101/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
102#include <config_cmd_default.h>
103
104/*
105 * Miscellaneous configurable options
106 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200107#define CONFIG_SYS_LONGHELP /* undef to save memory */
108#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
109#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200110
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200111#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
112#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
113#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
114#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* Default load address: 8 MB */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200115
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200116#define CONFIG_BOOTCOMMAND "run bootcmd1"
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200117#define CONFIG_BOOTARGS "root=/dev/sda1 console=ttyS1,57600 netconsole=@192.168.1.7/eth0,@192.168.1.1/00:50:BF:A4:59:71 rtc-rs5c372.probe=0,0x32 debug"
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200118#define CONFIG_NFSBOOTCOMMAND "bootp;run nfsargs;bootm"
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200119
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200120#define CONFIG_SYS_CONSOLE_IS_IN_ENV
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200121
122#define XMK_STR(x) #x
123#define MK_STR(x) XMK_STR(x)
124
125#if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
126#define UBFILE "share/u-boot/u-boot-hd.flash.bin"
127#elif defined(CONFIG_HGLAN)
128#define UBFILE "share/u-boot/u-boot-hg.flash.bin"
129#elif defined(CONFIG_HTGL)
130#define UBFILE "share/u-boot/u-boot-ht.flash.bin"
131#else
132#error No LinkStation model defined
133#endif
134
135#define CONFIG_EXTRA_ENV_SETTINGS \
136 "autoload=no\0" \
137 "stdin=nc\0" \
138 "stdout=nc\0" \
139 "stderr=nc\0" \
140 "ipaddr="MK_STR(CONFIG_IPADDR_LS)"\0" \
141 "netmask=255.255.255.0\0" \
142 "serverip="MK_STR(CONFIG_SERVERIP_LS)"\0" \
143 "ncip="MK_STR(CONFIG_NCIP_LS)"\0" \
144 "netretry=no\0" \
145 "nc=setenv stdin nc;setenv stdout nc;setenv stderr nc\0" \
146 "ser=setenv stdin serial;setenv stdout serial;setenv stderr serial\0" \
147 "ldaddr=800000\0" \
148 "hdpart=0:1\0" \
149 "hdfile=boot/uImage\0" \
150 "hdload=echo Loading ${hdpart}:${hdfile};ext2load ide ${hdpart} ${ldaddr} ${hdfile};ext2load ide ${hdpart} 7f0000 boot/kuroboxHG.dtb\0" \
151 "boothd=setenv bootargs " CONFIG_BOOTARGS ";bootm ${ldaddr} - 7f0000\0" \
152 "hdboot=run hdload;run boothd\0" \
153 "flboot=setenv bootargs root=/dev/hda1;bootm ffc00000\0" \
154 "emboot=setenv bootargs root=/dev/ram0;bootm ffc00000\0" \
155 "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
156 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \
157 "bootretry=30\0" \
158 "bootcmd1=run hdboot;run flboot\0" \
159 "bootcmd2=run flboot\0" \
160 "bootcmd3=run emboot\0" \
161 "writeng=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4e474e47 1;cp.b 800000 fff70000 4\0" \
162 "writeok=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4f4b4f4b 1;cp.b 800000 fff70000 4\0" \
163 "ubpart=0:3\0" \
164 "ubfile="UBFILE"\0" \
165 "ubload=echo Loading ${ubpart}:${ubfile};ext2load ide ${ubpart} ${ldaddr} ${ubfile}\0" \
166 "ubsaddr=fff00000\0" \
167 "ubeaddr=fff2ffff\0" \
168 "ubflash=protect off ${ubsaddr} ${ubeaddr};era ${ubsaddr} ${ubeaddr};cp.b ${ldaddr} ${ubsaddr} ${filesize};cmp.b ${ldaddr} ${ubsaddr} ${filesize}\0" \
169 "upgrade=run ubload ubflash\0"
170
171/*-----------------------------------------------------------------------
172 * PCI stuff
173 */
174#define CONFIG_PCI
175/* Verified: CONFIG_PCI_PNP doesn't work */
176#undef CONFIG_PCI_PNP
177#define CONFIG_PCI_SCAN_SHOW
178
179#ifndef CONFIG_PCI_PNP
180/* Keep the following defines in sync with the BAT mappings */
181
182#define PCI_ETH_IOADDR 0xbfff00
183#define PCI_ETH_MEMADDR 0xbffffc00
184#define PCI_IDE_IOADDR 0xbffed0
185#define PCI_IDE_MEMADDR 0xbffffb00
186#define PCI_USB0_IOADDR 0
187#define PCI_USB0_MEMADDR 0xbfffe000
188#define PCI_USB1_IOADDR 0
189#define PCI_USB1_MEMADDR 0xbfffd000
190#define PCI_USB2_IOADDR 0
191#define PCI_USB2_MEMADDR 0xbfffcf00
192
193#endif
194
195/*-----------------------------------------------------------------------
196 * Ethernet stuff
197 */
198#define CONFIG_NET_MULTI
199
200#if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
201#define CONFIG_TULIP
202#define CONFIG_TULIP_USE_IO
203#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
204#define CONFIG_RTL8169
205#endif
206
207#define CONFIG_NET_RETRY_COUNT 5
208
209#define CONFIG_NETCONSOLE
210
211/*-----------------------------------------------------------------------
212 * Start addresses for the final memory configuration
213 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200214 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200215 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200216#define CONFIG_SYS_SDRAM_BASE 0x00000000
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200217
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200218#define CONFIG_SYS_FLASH_BASE 0xFFC00000
219#define CONFIG_SYS_FLASH_SIZE 0x00400000
220#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200221
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200222#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
223#define CONFIG_SYS_EUMB_ADDR 0x80000000
224#define CONFIG_SYS_PCI_MEM_ADDR 0xB0000000
225#define CONFIG_SYS_MISC_REGION_ADDR 0xFE000000
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200226
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200227#define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256 kB */
228#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200229
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200230#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
231#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200232
233/* Maximum amount of RAM */
234#if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200235#define CONFIG_SYS_MAX_RAM_SIZE 0x04000000 /* 64MB of SDRAM */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200236#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200237#define CONFIG_SYS_MAX_RAM_SIZE 0x08000000 /* 128MB of SDRAM */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200238#else
239#error Unknown LinkStation type
240#endif
241
242/*-----------------------------------------------------------------------
243 * Change TEXT_BASE in bord/linkstation/config.mk to get a RAM build
244 *
245 * RAM based builds are for testing purposes. A Linux module, uloader.o,
246 * exists to load U-Boot and pass control to it
247 *
248 * Always do "make clean" after changing the build type
249 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200250#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
251#define CONFIG_SYS_RAMBOOT
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200252#endif
253
254/*-----------------------------------------------------------------------
255 * Definitions for initial stack pointer and data area
256 */
257#if 1 /* RAM is available when the first C function is called */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200258#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE - 0x1000)
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200259#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200260#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200261#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200262#define CONFIG_SYS_INIT_RAM_END 0x1000
263#define CONFIG_SYS_GBL_DATA_SIZE 128
264#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200265
266/*----------------------------------------------------------------------
267 * Serial configuration
268 */
269#define CONFIG_CONS_INDEX 1
270#define CONFIG_BAUDRATE 57600
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200271#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200272
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200273#define CONFIG_SYS_NS16550
274#define CONFIG_SYS_NS16550_SERIAL
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200275
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200276#define CONFIG_SYS_NS16550_REG_SIZE 1
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200277
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200278#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200279
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200280#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4600) /* Console port */
281#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4500) /* AVR port */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200282
283/*
284 * Low Level Configuration Settings
285 * (address mappings, register initial values, etc.)
286 * You should know what you are doing if you make changes here.
287 * For the detail description refer to the MPC8245 user's manual.
288 *
289 * Unless indicated otherwise, the values are
290 * taken from the orignal Linkstation boot code
291 *
292 * Most of the low level configuration setttings are normally used
Stefan Roesea47a12b2010-04-15 16:07:28 +0200293 * in arch/powerpc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200294 * Low level initialisation is done in board/linkstation/early_init.S
295 * The values below are included for reference purpose only
296 */
297
298/* FIXME: 32.768 MHz is the crystal frequency but */
299/* the real frequency is lower by about 0.75% */
300#define CONFIG_SYS_CLK_FREQ 32768000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200301#define CONFIG_SYS_HZ 1000
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200302
303/* Bit-field values for MCCR1. */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200304#define CONFIG_SYS_ROMNAL 0
305#define CONFIG_SYS_ROMFAL 11
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200306
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200307#define CONFIG_SYS_BANK0_ROW 2 /* Only bank 0 used: 13 x n x 4 */
308#define CONFIG_SYS_BANK1_ROW 0
309#define CONFIG_SYS_BANK2_ROW 0
310#define CONFIG_SYS_BANK3_ROW 0
311#define CONFIG_SYS_BANK4_ROW 0
312#define CONFIG_SYS_BANK5_ROW 0
313#define CONFIG_SYS_BANK6_ROW 0
314#define CONFIG_SYS_BANK7_ROW 0
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200315
316/* Bit-field values for MCCR2. */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200317#define CONFIG_SYS_TSWAIT 0
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200318#if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200319#define CONFIG_SYS_REFINT 0x15e0
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200320#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200321#define CONFIG_SYS_REFINT 0x1580
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200322#endif
323
324/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200325#define CONFIG_SYS_BSTOPRE 0x91c
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200326
327/* Bit-field values for MCCR3. */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200328#define CONFIG_SYS_REFREC 7
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200329
330/* Bit-field values for MCCR4. */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200331#define CONFIG_SYS_PRETOACT 2
332#define CONFIG_SYS_ACTTOPRE 2 /* Original value was 2 */
333#define CONFIG_SYS_ACTORW 2
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200334#if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200335#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* For 100MHz bus */
336/*#define CONFIG_SYS_SDMODE_BURSTLEN 3*/
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200337#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200338#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* For 133MHz bus */
339/*#define CONFIG_SYS_SDMODE_BURSTLEN 2*/
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200340#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200341#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
342#define CONFIG_SYS_EXTROM 1 /* Original setting but there is no EXTROM */
343#define CONFIG_SYS_REGDIMM 0
344#define CONFIG_SYS_DBUS_SIZE2 1
345#define CONFIG_SYS_SDMODE_WRAP 0
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200346
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200347#define CONFIG_SYS_PGMAX 0x32 /* All boards use this setting. Original 0x92 */
348#define CONFIG_SYS_SDRAM_DSCD 0x30
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200349
350/* Memory bank settings.
351 * Only bits 20-29 are actually used from these vales to set the
352 * start/end addresses. The upper two bits will always be 0, and the lower
353 * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
354 * address. Refer to the MPC8240 book.
355 */
356
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200357#define CONFIG_SYS_BANK0_START 0x00000000
358#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
359#define CONFIG_SYS_BANK0_ENABLE 1
360#define CONFIG_SYS_BANK1_START 0x3ff00000
361#define CONFIG_SYS_BANK1_END 0x3fffffff
362#define CONFIG_SYS_BANK1_ENABLE 0
363#define CONFIG_SYS_BANK2_START 0x3ff00000
364#define CONFIG_SYS_BANK2_END 0x3fffffff
365#define CONFIG_SYS_BANK2_ENABLE 0
366#define CONFIG_SYS_BANK3_START 0x3ff00000
367#define CONFIG_SYS_BANK3_END 0x3fffffff
368#define CONFIG_SYS_BANK3_ENABLE 0
369#define CONFIG_SYS_BANK4_START 0x3ff00000
370#define CONFIG_SYS_BANK4_END 0x3fffffff
371#define CONFIG_SYS_BANK4_ENABLE 0
372#define CONFIG_SYS_BANK5_START 0x3ff00000
373#define CONFIG_SYS_BANK5_END 0x3fffffff
374#define CONFIG_SYS_BANK5_ENABLE 0
375#define CONFIG_SYS_BANK6_START 0x3ff00000
376#define CONFIG_SYS_BANK6_END 0x3fffffff
377#define CONFIG_SYS_BANK6_ENABLE 0
378#define CONFIG_SYS_BANK7_START 0x3ff00000
379#define CONFIG_SYS_BANK7_END 0x3fffffff
380#define CONFIG_SYS_BANK7_ENABLE 0
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200381
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200382#define CONFIG_SYS_ODCR 0x15
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200383
384/*----------------------------------------------------------------------
385 * Initial BAT mappings
386 */
387
388/* NOTES:
389 * 1) GUARDED and WRITETHROUGH not allowed in IBATS
390 * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
391 */
392
393/* SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200394#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
395#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200396
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200397#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
398#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200399
400/* EUMB: 1MB of address space */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200401#define CONFIG_SYS_IBAT1L (CONFIG_SYS_EUMB_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
402#define CONFIG_SYS_IBAT1U (CONFIG_SYS_EUMB_ADDR | BATU_BL_1M | BATU_VS | BATU_VP)
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200403
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200404#define CONFIG_SYS_DBAT1L (CONFIG_SYS_IBAT1L | BATL_GUARDEDSTORAGE)
405#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200406
407/* PCI Mem: 256MB of address space */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200408#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
409#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP)
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200410
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200411#define CONFIG_SYS_DBAT2L (CONFIG_SYS_IBAT2L | BATL_GUARDEDSTORAGE)
412#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200413
414/* PCI and local ROM/Flash: last 32MB of address space */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200415#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
416#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_ADDR | BATU_BL_32M | BATU_VS | BATU_VP)
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200417
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200418#define CONFIG_SYS_DBAT3L (CONFIG_SYS_IBAT3L | BATL_GUARDEDSTORAGE)
419#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200420
421/*
422 * For booting Linux, the board info and command line data
423 * have to be in the first 8 MB of memory, since this is
424 * the maximum mapped by the Linux kernel during initialization.
425 *
426 * FIXME: This doesn't appear to be true for the newer kernels
427 * which map more that 8 MB
428 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200429#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200430
431/*-----------------------------------------------------------------------
432 * FLASH organization
433 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200434#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200435#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200436
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200437#undef CONFIG_SYS_FLASH_PROTECTION
438#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
439#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
440#define CONFIG_SYS_MAX_FLASH_SECT 72 /* Max number of sectors per flash */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200441
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200442#define CONFIG_SYS_FLASH_ERASE_TOUT 12000
443#define CONFIG_SYS_FLASH_WRITE_TOUT 1000
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200444
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200445#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200446
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200447#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
448#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200449
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200450#define CONFIG_ENV_IS_IN_FLASH
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200451/*
452 * The original LinkStation flash organisation uses
453 * 448 kB (0xFFF00000 - 0xFFF6FFFF) for the boot loader
454 * We use the last sector of this area to store the environment
455 * which leaves max. 384 kB for the U-Boot itself
456 */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200457#define CONFIG_ENV_ADDR 0xFFF60000
458#define CONFIG_ENV_SIZE 0x00010000
459#define CONFIG_ENV_SECT_SIZE 0x00010000
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200460
461/*-----------------------------------------------------------------------
462 * Cache Configuration
463 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200464#define CONFIG_SYS_CACHELINE_SIZE 32
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200465#ifdef CONFIG_CMD_KGDB
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200466#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200467#endif
468
469/*-----------------------------------------------------------------------
470 * IDE/ATA definitions
471 */
472#undef CONFIG_IDE_LED /* No IDE LED */
473#define CONFIG_IDE_RESET /* no reset for ide supported */
474#define CONFIG_IDE_PREINIT /* check for units */
475#define CONFIG_LBA48 /* 48 bit LBA supported */
476
477#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) || defined(CONFIG_HGLAN)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200478#define CONFIG_SYS_IDE_MAXBUS 1 /* Scan only 1 IDE bus */
479#define CONFIG_SYS_IDE_MAXDEVICE 1 /* Only 1 drive per IDE bus */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200480#elif defined(CONFIG_HGTL)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200481#define CONFIG_SYS_IDE_MAXBUS 2 /* Max. 2 IDE busses */
482#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200483#else
484#error Config IDE: Unknown LinkStation type
485#endif
486
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200487#define CONFIG_SYS_ATA_BASE_ADDR 0
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200488
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200489#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* Offset for data I/O */
490#define CONFIG_SYS_ATA_REG_OFFSET 0 /* Offset for normal registers */
491#define CONFIG_SYS_ATA_ALT_OFFSET 0 /* Offset for alternate registers */
Guennadi Liakhovetski61525f22008-03-31 01:32:15 +0200492
493/*-----------------------------------------------------------------------
494 * Partitions and file system
495 */
496#define CONFIG_DOS_PARTITION
497
498/*-----------------------------------------------------------------------
499 * Internal Definitions
500 *
501 * Boot Flags
502 */
503#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
504#define BOOTFLAG_WARM 0x02 /* Software reboot */
505
506#endif /* __CONFIG_H */