blob: a2981b18eb50b1e31bdda016478b0ea9135a78ea [file] [log] [blame]
Stefano Babic13402862011-10-07 23:27:34 +00001/*
2 * Porting to u-boot:
3 *
4 * (C) Copyright 2011
5 * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
6 *
7 * Copyright (C) 2008-2009 MontaVista Software Inc.
8 * Copyright (C) 2008-2009 Texas Instruments Inc
9 *
10 * Based on the LCD driver for TI Avalanche processors written by
11 * Ajay Singh and Shalom Hai.
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option)any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
26 */
27
28#include <common.h>
29#include <malloc.h>
30#include <video_fb.h>
31#include <linux/list.h>
32#include <linux/fb.h>
33
34#include <asm/errno.h>
35#include <asm/io.h>
36#include <asm/arch/hardware.h>
37
38#include "videomodes.h"
39#include <asm/arch/da8xx-fb.h>
40
41#define DRIVER_NAME "da8xx_lcdc"
42
43/* LCD Status Register */
44#define LCD_END_OF_FRAME1 (1 << 9)
45#define LCD_END_OF_FRAME0 (1 << 8)
46#define LCD_PL_LOAD_DONE (1 << 6)
47#define LCD_FIFO_UNDERFLOW (1 << 5)
48#define LCD_SYNC_LOST (1 << 2)
49
50/* LCD DMA Control Register */
51#define LCD_DMA_BURST_SIZE(x) ((x) << 4)
52#define LCD_DMA_BURST_1 0x0
53#define LCD_DMA_BURST_2 0x1
54#define LCD_DMA_BURST_4 0x2
55#define LCD_DMA_BURST_8 0x3
56#define LCD_DMA_BURST_16 0x4
57#define LCD_END_OF_FRAME_INT_ENA (1 << 2)
58#define LCD_DUAL_FRAME_BUFFER_ENABLE (1 << 0)
59
60/* LCD Control Register */
61#define LCD_CLK_DIVISOR(x) ((x) << 8)
62#define LCD_RASTER_MODE 0x01
63
64/* LCD Raster Control Register */
65#define LCD_PALETTE_LOAD_MODE(x) ((x) << 20)
66#define PALETTE_AND_DATA 0x00
67#define PALETTE_ONLY 0x01
68#define DATA_ONLY 0x02
69
70#define LCD_MONO_8BIT_MODE (1 << 9)
71#define LCD_RASTER_ORDER (1 << 8)
72#define LCD_TFT_MODE (1 << 7)
73#define LCD_UNDERFLOW_INT_ENA (1 << 6)
74#define LCD_PL_ENABLE (1 << 4)
75#define LCD_MONOCHROME_MODE (1 << 1)
76#define LCD_RASTER_ENABLE (1 << 0)
77#define LCD_TFT_ALT_ENABLE (1 << 23)
78#define LCD_STN_565_ENABLE (1 << 24)
79
80/* LCD Raster Timing 2 Register */
81#define LCD_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16)
82#define LCD_AC_BIAS_FREQUENCY(x) ((x) << 8)
83#define LCD_SYNC_CTRL (1 << 25)
84#define LCD_SYNC_EDGE (1 << 24)
85#define LCD_INVERT_PIXEL_CLOCK (1 << 22)
86#define LCD_INVERT_LINE_CLOCK (1 << 21)
87#define LCD_INVERT_FRAME_CLOCK (1 << 20)
88
89/* LCD Block */
90struct da8xx_lcd_regs {
91 u32 revid;
92 u32 ctrl;
93 u32 stat;
94 u32 lidd_ctrl;
95 u32 lidd_cs0_conf;
96 u32 lidd_cs0_addr;
97 u32 lidd_cs0_data;
98 u32 lidd_cs1_conf;
99 u32 lidd_cs1_addr;
100 u32 lidd_cs1_data;
101 u32 raster_ctrl;
102 u32 raster_timing_0;
103 u32 raster_timing_1;
104 u32 raster_timing_2;
105 u32 raster_subpanel;
106 u32 reserved;
107 u32 dma_ctrl;
108 u32 dma_frm_buf_base_addr_0;
109 u32 dma_frm_buf_ceiling_addr_0;
110 u32 dma_frm_buf_base_addr_1;
111 u32 dma_frm_buf_ceiling_addr_1;
112};
113
114#define LCD_NUM_BUFFERS 1
115
116#define WSI_TIMEOUT 50
117#define PALETTE_SIZE 256
118#define LEFT_MARGIN 64
119#define RIGHT_MARGIN 64
120#define UPPER_MARGIN 32
121#define LOWER_MARGIN 32
122
123#define calc_fbsize() (panel.plnSizeX * panel.plnSizeY * panel.gdfBytesPP)
124#define mdelay(n) ({unsigned long msec = (n); while (msec--) udelay(1000); })
125
126static struct da8xx_lcd_regs *da8xx_fb_reg_base;
127
128DECLARE_GLOBAL_DATA_PTR;
129
130/* graphics setup */
131static GraphicDevice gpanel;
132static const struct da8xx_panel *lcd_panel;
133static struct fb_info *da8xx_fb_info;
134static int bits_x_pixel;
135
136static inline unsigned int lcdc_read(u32 *addr)
137{
138 return (unsigned int)readl(addr);
139}
140
141static inline void lcdc_write(unsigned int val, u32 *addr)
142{
143 writel(val, addr);
144}
145
146struct da8xx_fb_par {
147 u32 p_palette_base;
148 unsigned char *v_palette_base;
149 dma_addr_t vram_phys;
150 unsigned long vram_size;
151 void *vram_virt;
152 unsigned int dma_start;
153 unsigned int dma_end;
154 struct clk *lcdc_clk;
155 int irq;
156 unsigned short pseudo_palette[16];
157 unsigned int palette_sz;
158 unsigned int pxl_clk;
159 int blank;
160 int vsync_flag;
161 int vsync_timeout;
162};
163
164
165/* Variable Screen Information */
166static struct fb_var_screeninfo da8xx_fb_var = {
167 .xoffset = 0,
168 .yoffset = 0,
169 .transp = {0, 0, 0},
170 .nonstd = 0,
171 .activate = 0,
172 .height = -1,
173 .width = -1,
174 .pixclock = 46666, /* 46us - AUO display */
175 .accel_flags = 0,
176 .left_margin = LEFT_MARGIN,
177 .right_margin = RIGHT_MARGIN,
178 .upper_margin = UPPER_MARGIN,
179 .lower_margin = LOWER_MARGIN,
180 .sync = 0,
181 .vmode = FB_VMODE_NONINTERLACED
182};
183
184static struct fb_fix_screeninfo da8xx_fb_fix = {
185 .id = "DA8xx FB Drv",
186 .type = FB_TYPE_PACKED_PIXELS,
187 .type_aux = 0,
188 .visual = FB_VISUAL_PSEUDOCOLOR,
189 .xpanstep = 0,
190 .ypanstep = 1,
191 .ywrapstep = 0,
192 .accel = FB_ACCEL_NONE
193};
194
195static const struct display_panel disp_panel = {
196 QVGA,
197 16,
198 16,
199 COLOR_ACTIVE,
200};
201
202static const struct lcd_ctrl_config lcd_cfg = {
203 &disp_panel,
204 .ac_bias = 255,
205 .ac_bias_intrpt = 0,
206 .dma_burst_sz = 16,
207 .bpp = 16,
208 .fdd = 255,
209 .tft_alt_mode = 0,
210 .stn_565_mode = 0,
211 .mono_8bit_mode = 0,
212 .invert_line_clock = 1,
213 .invert_frm_clock = 1,
214 .sync_edge = 0,
215 .sync_ctrl = 1,
216 .raster_order = 0,
217};
218
219/* Enable the Raster Engine of the LCD Controller */
220static inline void lcd_enable_raster(void)
221{
222 u32 reg;
223
224 reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
225 if (!(reg & LCD_RASTER_ENABLE))
226 lcdc_write(reg | LCD_RASTER_ENABLE,
227 &da8xx_fb_reg_base->raster_ctrl);
228}
229
230/* Disable the Raster Engine of the LCD Controller */
231static inline void lcd_disable_raster(void)
232{
233 u32 reg;
234
235 reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
236 if (reg & LCD_RASTER_ENABLE)
237 lcdc_write(reg & ~LCD_RASTER_ENABLE,
238 &da8xx_fb_reg_base->raster_ctrl);
239}
240
241static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
242{
243 u32 start;
244 u32 end;
245 u32 reg_ras;
246 u32 reg_dma;
247
248 /* init reg to clear PLM (loading mode) fields */
249 reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
250 reg_ras &= ~(3 << 20);
251
252 reg_dma = lcdc_read(&da8xx_fb_reg_base->dma_ctrl);
253
254 if (load_mode == LOAD_DATA) {
255 start = par->dma_start;
256 end = par->dma_end;
257
258 reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY);
259 reg_dma |= LCD_END_OF_FRAME_INT_ENA;
260
261#if (LCD_NUM_BUFFERS == 2)
262 reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE;
263 lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
264 lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
265 lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1);
266 lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
267#else
268 reg_dma &= ~LCD_DUAL_FRAME_BUFFER_ENABLE;
269 lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
270 lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
271 lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1);
272 lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
273#endif
274
275 } else if (load_mode == LOAD_PALETTE) {
276 start = par->p_palette_base;
277 end = start + par->palette_sz - 1;
278
279 reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY);
280 reg_ras |= LCD_PL_ENABLE;
281
282 lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
283 lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
284 }
285
286 lcdc_write(reg_dma, &da8xx_fb_reg_base->dma_ctrl);
287 lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl);
288
289 /*
290 * The Raster enable bit must be set after all other control fields are
291 * set.
292 */
293 lcd_enable_raster();
294}
295
296/* Configure the Burst Size of DMA */
297static int lcd_cfg_dma(int burst_size)
298{
299 u32 reg;
300
301 reg = lcdc_read(&da8xx_fb_reg_base->dma_ctrl) & 0x00000001;
302 switch (burst_size) {
303 case 1:
304 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_1);
305 break;
306 case 2:
307 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_2);
308 break;
309 case 4:
310 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_4);
311 break;
312 case 8:
313 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_8);
314 break;
315 case 16:
316 reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16);
317 break;
318 default:
319 return -EINVAL;
320 }
321 lcdc_write(reg, &da8xx_fb_reg_base->dma_ctrl);
322
323 return 0;
324}
325
326static void lcd_cfg_ac_bias(int period, int transitions_per_int)
327{
328 u32 reg;
329
330 /* Set the AC Bias Period and Number of Transisitons per Interrupt */
331 reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2) & 0xFFF00000;
332 reg |= LCD_AC_BIAS_FREQUENCY(period) |
333 LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int);
334 lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2);
335}
336
337static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width,
338 int front_porch)
339{
340 u32 reg;
341
342 reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0) & 0xf;
343 reg |= ((back_porch & 0xff) << 24)
344 | ((front_porch & 0xff) << 16)
345 | ((pulse_width & 0x3f) << 10);
346 lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0);
347}
348
349static void lcd_cfg_vertical_sync(int back_porch, int pulse_width,
350 int front_porch)
351{
352 u32 reg;
353
354 reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1) & 0x3ff;
355 reg |= ((back_porch & 0xff) << 24)
356 | ((front_porch & 0xff) << 16)
357 | ((pulse_width & 0x3f) << 10);
358 lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1);
359}
360
361static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
362{
363 u32 reg;
364
365 reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(LCD_TFT_MODE |
366 LCD_MONO_8BIT_MODE |
367 LCD_MONOCHROME_MODE);
368
369 switch (cfg->p_disp_panel->panel_shade) {
370 case MONOCHROME:
371 reg |= LCD_MONOCHROME_MODE;
372 if (cfg->mono_8bit_mode)
373 reg |= LCD_MONO_8BIT_MODE;
374 break;
375 case COLOR_ACTIVE:
376 reg |= LCD_TFT_MODE;
377 if (cfg->tft_alt_mode)
378 reg |= LCD_TFT_ALT_ENABLE;
379 break;
380
381 case COLOR_PASSIVE:
382 if (cfg->stn_565_mode)
383 reg |= LCD_STN_565_ENABLE;
384 break;
385
386 default:
387 return -EINVAL;
388 }
389
390 /* enable additional interrupts here */
391 reg |= LCD_UNDERFLOW_INT_ENA;
392
393 lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl);
394
395 reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2);
396
397 if (cfg->sync_ctrl)
398 reg |= LCD_SYNC_CTRL;
399 else
400 reg &= ~LCD_SYNC_CTRL;
401
402 if (cfg->sync_edge)
403 reg |= LCD_SYNC_EDGE;
404 else
405 reg &= ~LCD_SYNC_EDGE;
406
407 if (cfg->invert_line_clock)
408 reg |= LCD_INVERT_LINE_CLOCK;
409 else
410 reg &= ~LCD_INVERT_LINE_CLOCK;
411
412 if (cfg->invert_frm_clock)
413 reg |= LCD_INVERT_FRAME_CLOCK;
414 else
415 reg &= ~LCD_INVERT_FRAME_CLOCK;
416
417 lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2);
418
419 return 0;
420}
421
422static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height,
423 u32 bpp, u32 raster_order)
424{
425 u32 reg;
426
427 /* Set the Panel Width */
428 /* Pixels per line = (PPL + 1)*16 */
429 /*0x3F in bits 4..9 gives max horisontal resolution = 1024 pixels*/
430 width &= 0x3f0;
431 reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0);
432 reg &= 0xfffffc00;
433 reg |= ((width >> 4) - 1) << 4;
434 lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0);
435
436 /* Set the Panel Height */
437 reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1);
438 reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00);
439 lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1);
440
441 /* Set the Raster Order of the Frame Buffer */
442 reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(1 << 8);
443 if (raster_order)
444 reg |= LCD_RASTER_ORDER;
445 lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl);
446
447 switch (bpp) {
448 case 1:
449 case 2:
450 case 4:
451 case 16:
452 par->palette_sz = 16 * 2;
453 break;
454
455 case 8:
456 par->palette_sz = 256 * 2;
457 break;
458
459 default:
460 return -EINVAL;
461 }
462
463 return 0;
464}
465
466static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
467 unsigned blue, unsigned transp,
468 struct fb_info *info)
469{
470 struct da8xx_fb_par *par = info->par;
471 unsigned short *palette = (unsigned short *) par->v_palette_base;
472 u_short pal;
473 int update_hw = 0;
474
475 if (regno > 255)
476 return 1;
477
478 if (info->fix.visual == FB_VISUAL_DIRECTCOLOR)
479 return 1;
480
481 if (info->var.bits_per_pixel == 8) {
482 red >>= 4;
483 green >>= 8;
484 blue >>= 12;
485
486 pal = (red & 0x0f00);
487 pal |= (green & 0x00f0);
488 pal |= (blue & 0x000f);
489
490 if (palette[regno] != pal) {
491 update_hw = 1;
492 palette[regno] = pal;
493 }
494 } else if ((info->var.bits_per_pixel == 16) && regno < 16) {
495 red >>= (16 - info->var.red.length);
496 red <<= info->var.red.offset;
497
498 green >>= (16 - info->var.green.length);
499 green <<= info->var.green.offset;
500
501 blue >>= (16 - info->var.blue.length);
502 blue <<= info->var.blue.offset;
503
504 par->pseudo_palette[regno] = red | green | blue;
505
506 if (palette[0] != 0x4000) {
507 update_hw = 1;
508 palette[0] = 0x4000;
509 }
510 }
511
512 /* Update the palette in the h/w as needed. */
513 if (update_hw)
514 lcd_blit(LOAD_PALETTE, par);
515
516 return 0;
517}
518
519static void lcd_reset(struct da8xx_fb_par *par)
520{
521 /* Disable the Raster if previously Enabled */
522 lcd_disable_raster();
523
524 /* DMA has to be disabled */
525 lcdc_write(0, &da8xx_fb_reg_base->dma_ctrl);
526 lcdc_write(0, &da8xx_fb_reg_base->raster_ctrl);
527}
528
529static void lcd_calc_clk_divider(struct da8xx_fb_par *par)
530{
531 unsigned int lcd_clk, div;
532
533 /* Get clock from sysclk2 */
534 lcd_clk = clk_get(2);
535
536 div = lcd_clk / par->pxl_clk;
537 debug("LCD Clock: 0x%x Divider: 0x%x PixClk: 0x%x\n",
538 lcd_clk, div, par->pxl_clk);
539
540 /* Configure the LCD clock divisor. */
541 lcdc_write(LCD_CLK_DIVISOR(div) |
542 (LCD_RASTER_MODE & 0x1), &da8xx_fb_reg_base->ctrl);
543}
544
545static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
546 const struct da8xx_panel *panel)
547{
548 u32 bpp;
549 int ret = 0;
550
551 lcd_reset(par);
552
553 /* Calculate the divider */
554 lcd_calc_clk_divider(par);
555
556 if (panel->invert_pxl_clk)
557 lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) |
558 LCD_INVERT_PIXEL_CLOCK),
559 &da8xx_fb_reg_base->raster_timing_2);
560 else
561 lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) &
562 ~LCD_INVERT_PIXEL_CLOCK),
563 &da8xx_fb_reg_base->raster_timing_2);
564
565 /* Configure the DMA burst size. */
566 ret = lcd_cfg_dma(cfg->dma_burst_sz);
567 if (ret < 0)
568 return ret;
569
570 /* Configure the AC bias properties. */
571 lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt);
572
573 /* Configure the vertical and horizontal sync properties. */
574 lcd_cfg_vertical_sync(panel->vbp, panel->vsw, panel->vfp);
575 lcd_cfg_horizontal_sync(panel->hbp, panel->hsw, panel->hfp);
576
577 /* Configure for disply */
578 ret = lcd_cfg_display(cfg);
579 if (ret < 0)
580 return ret;
581
582 if (QVGA != cfg->p_disp_panel->panel_type)
583 return -EINVAL;
584
585 if (cfg->bpp <= cfg->p_disp_panel->max_bpp &&
586 cfg->bpp >= cfg->p_disp_panel->min_bpp)
587 bpp = cfg->bpp;
588 else
589 bpp = cfg->p_disp_panel->max_bpp;
590 if (bpp == 12)
591 bpp = 16;
592 ret = lcd_cfg_frame_buffer(par, (unsigned int)panel->width,
593 (unsigned int)panel->height, bpp,
594 cfg->raster_order);
595 if (ret < 0)
596 return ret;
597
598 /* Configure FDD */
599 lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & 0xfff00fff) |
600 (cfg->fdd << 12), &da8xx_fb_reg_base->raster_ctrl);
601
602 return 0;
603}
604
605static void lcdc_dma_start(void)
606{
607 struct da8xx_fb_par *par = da8xx_fb_info->par;
608 lcdc_write(par->dma_start,
609 &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
610 lcdc_write(par->dma_end,
611 &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
612 lcdc_write(0,
613 &da8xx_fb_reg_base->dma_frm_buf_base_addr_1);
614 lcdc_write(0,
615 &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
616}
617
618static u32 lcdc_irq_handler(void)
619{
620 struct da8xx_fb_par *par = da8xx_fb_info->par;
621 u32 stat = lcdc_read(&da8xx_fb_reg_base->stat);
622 u32 reg_ras;
623
624 if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
625 debug("LCD_SYNC_LOST\n");
626 lcd_disable_raster();
627 lcdc_write(stat, &da8xx_fb_reg_base->stat);
628 lcd_enable_raster();
629 return LCD_SYNC_LOST;
630 } else if (stat & LCD_PL_LOAD_DONE) {
631 debug("LCD_PL_LOAD_DONE\n");
632 /*
633 * Must disable raster before changing state of any control bit.
634 * And also must be disabled before clearing the PL loading
635 * interrupt via the following write to the status register. If
636 * this is done after then one gets multiple PL done interrupts.
637 */
638 lcd_disable_raster();
639
640 lcdc_write(stat, &da8xx_fb_reg_base->stat);
641
642 /* Disable PL completion inerrupt */
643 reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
644 reg_ras &= ~LCD_PL_ENABLE;
645 lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl);
646
647 /* Setup and start data loading mode */
648 lcd_blit(LOAD_DATA, par);
649 return LCD_PL_LOAD_DONE;
650 } else {
651 lcdc_write(stat, &da8xx_fb_reg_base->stat);
652
653 if (stat & LCD_END_OF_FRAME0)
654 debug("LCD_END_OF_FRAME0\n");
655
656 lcdc_write(par->dma_start,
657 &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
658 lcdc_write(par->dma_end,
659 &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
660 par->vsync_flag = 1;
661 return LCD_END_OF_FRAME0;
662 }
663 return stat;
664}
665
666static u32 wait_for_event(u32 event)
667{
668 u32 timeout = 50000;
669 u32 ret;
670
671 do {
672 ret = lcdc_irq_handler();
673 udelay(1000);
674 } while (!(ret & event));
675
676 if (timeout <= 0) {
677 printf("%s: event %d not hit\n", __func__, event);
678 return -1;
679 }
680
681 return 0;
682
683}
684
685void *video_hw_init(void)
686{
687 struct da8xx_fb_par *par;
Stefano Babic13402862011-10-07 23:27:34 +0000688 u32 size;
689 char *p;
690
691 if (!lcd_panel) {
692 printf("Display not initialized\n");
693 return NULL;
694 }
695 gpanel.winSizeX = lcd_panel->width;
696 gpanel.winSizeY = lcd_panel->height;
697 gpanel.plnSizeX = lcd_panel->width;
698 gpanel.plnSizeY = lcd_panel->height;
699
700 switch (bits_x_pixel) {
701 case 24:
702 gpanel.gdfBytesPP = 4;
703 gpanel.gdfIndex = GDF_32BIT_X888RGB;
704 break;
705 case 16:
706 gpanel.gdfBytesPP = 2;
707 gpanel.gdfIndex = GDF_16BIT_565RGB;
708 break;
709 default:
710 gpanel.gdfBytesPP = 1;
711 gpanel.gdfIndex = GDF__8BIT_INDEX;
712 break;
713 }
714
715 da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DAVINCI_LCD_CNTL_BASE;
716
717 debug("Resolution: %dx%d %x\n",
718 gpanel.winSizeX,
719 gpanel.winSizeY,
720 lcd_cfg.bpp);
721
722 size = sizeof(struct fb_info) + sizeof(struct da8xx_fb_par);
723 da8xx_fb_info = malloc(size);
724 debug("da8xx_fb_info at %x\n", (unsigned int)da8xx_fb_info);
725
726 if (!da8xx_fb_info) {
727 printf("Memory allocation failed for fb_info\n");
728 return NULL;
729 }
730 memset(da8xx_fb_info, 0, size);
731 p = (char *)da8xx_fb_info;
732 da8xx_fb_info->par = p + sizeof(struct fb_info);
733 debug("da8xx_par at %x\n", (unsigned int)da8xx_fb_info->par);
734
735 par = da8xx_fb_info->par;
736 par->pxl_clk = lcd_panel->pxl_clk;
737
738 if (lcd_init(par, &lcd_cfg, lcd_panel) < 0) {
739 printf("lcd_init failed\n");
Stefano Babic13402862011-10-07 23:27:34 +0000740 goto err_release_fb;
741 }
742
743 /* allocate frame buffer */
744 par->vram_size = lcd_panel->width * lcd_panel->height * lcd_cfg.bpp;
745 par->vram_size = par->vram_size * LCD_NUM_BUFFERS / 8;
746
747 par->vram_virt = malloc(par->vram_size);
748
749 par->vram_phys = (dma_addr_t) par->vram_virt;
750 debug("Requesting 0x%x bytes for framebuffer at 0x%x\n",
751 (unsigned int)par->vram_size,
752 (unsigned int)par->vram_virt);
753 if (!par->vram_virt) {
754 printf("GLCD: malloc for frame buffer failed\n");
Stefano Babic13402862011-10-07 23:27:34 +0000755 goto err_release_fb;
756 }
757
758 gpanel.frameAdrs = (unsigned int)par->vram_virt;
759 da8xx_fb_info->screen_base = (char *) par->vram_virt;
760 da8xx_fb_fix.smem_start = gpanel.frameAdrs;
761 da8xx_fb_fix.smem_len = par->vram_size;
762 da8xx_fb_fix.line_length = (lcd_panel->width * lcd_cfg.bpp) / 8;
763
764 par->dma_start = par->vram_phys;
765 par->dma_end = par->dma_start + lcd_panel->height *
766 da8xx_fb_fix.line_length - 1;
767
768 /* allocate palette buffer */
769 par->v_palette_base = malloc(PALETTE_SIZE);
770 if (!par->v_palette_base) {
771 printf("GLCD: malloc for palette buffer failed\n");
772 goto err_release_fb_mem;
773 }
774 memset(par->v_palette_base, 0, PALETTE_SIZE);
775 par->p_palette_base = (unsigned int)par->v_palette_base;
776
777 /* Initialize par */
778 da8xx_fb_info->var.bits_per_pixel = lcd_cfg.bpp;
779
780 da8xx_fb_var.xres = lcd_panel->width;
781 da8xx_fb_var.xres_virtual = lcd_panel->width;
782
783 da8xx_fb_var.yres = lcd_panel->height;
784 da8xx_fb_var.yres_virtual = lcd_panel->height * LCD_NUM_BUFFERS;
785
786 da8xx_fb_var.grayscale =
787 lcd_cfg.p_disp_panel->panel_shade == MONOCHROME ? 1 : 0;
788 da8xx_fb_var.bits_per_pixel = lcd_cfg.bpp;
789
790 da8xx_fb_var.hsync_len = lcd_panel->hsw;
791 da8xx_fb_var.vsync_len = lcd_panel->vsw;
792
793 /* Initialize fbinfo */
794 da8xx_fb_info->flags = FBINFO_FLAG_DEFAULT;
795 da8xx_fb_info->fix = da8xx_fb_fix;
796 da8xx_fb_info->var = da8xx_fb_var;
797 da8xx_fb_info->pseudo_palette = par->pseudo_palette;
798 da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ?
799 FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
800
801 /* Clear interrupt */
802 memset((void *)par->vram_virt, 0, par->vram_size);
803 lcd_disable_raster();
804 lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat);
805 debug("Palette at 0x%x size %d\n", par->p_palette_base,
806 par->palette_sz);
807 lcdc_dma_start();
808
809 /* Load a default palette */
810 fb_setcolreg(0, 0, 0, 0, 0xffff, da8xx_fb_info);
811
812 /* Check that the palette is loaded */
813 wait_for_event(LCD_PL_LOAD_DONE);
814
815 /* Wait until DMA is working */
816 wait_for_event(LCD_END_OF_FRAME0);
817
818 return (void *)&gpanel;
819
820err_release_fb_mem:
821 free(par->vram_virt);
822
823err_release_fb:
824 free(da8xx_fb_info);
825
826 return NULL;
827}
828
829void video_set_lut(unsigned int index, /* color number */
830 unsigned char r, /* red */
831 unsigned char g, /* green */
832 unsigned char b /* blue */
833 )
834{
835
836 return;
837}
838
839void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel)
840{
841 lcd_panel = panel;
842 bits_x_pixel = bits_pixel;
843}