blob: 42798c20009fb4cea7977389bc5d48a578ad1e75 [file] [log] [blame]
TsiChung Liew536e7da2008-10-22 11:38:21 +00001Freescale MCF53017EVB ColdFire Development Board
2================================================
3
4TsiChung Liew(Tsi-Chung.Liew@freescale.com)
5Created 10/22/08
6===========================================
7
8
9Changed files:
10==============
11
12- board/freescale/m53017evb/m53017evb.c Dram setup
13- board/freescale/m53017evb/mii.c Mii access
14- board/freescale/m53017evb/Makefile Makefile
15- board/freescale/m53017evb/config.mk config make
16- board/freescale/m53017evb/u-boot.lds Linker description
17
Peter Tysera4145532010-04-12 22:28:12 -050018- arch/m68k/cpu/mcf532x/cpu.c cpu specific code
19- arch/m68k/cpu/mcf532x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs
20- arch/m68k/cpu/mcf532x/interrupts.c cpu specific interrupt support
21- arch/m68k/cpu/mcf532x/speed.c system, flexbus, and cpu clock
22- arch/m68k/cpu/mcf532x/Makefile Makefile
23- arch/m68k/cpu/mcf532x/config.mk config make
24- arch/m68k/cpu/mcf532x/start.S start up assembly code
TsiChung Liew536e7da2008-10-22 11:38:21 +000025
26- doc/README.m53017evb This readme file
27
28- drivers/net/mcffec.c ColdFire common FEC driver
29- drivers/net/mcfmii.c ColdFire common Mii driver
30- drivers/serial/mcfuart.c ColdFire common UART driver
31- drivers/rtc/mcfrtc.c Realtime clock Driver
32
33- include/asm-m68k/bitops.h Bit operation function export
34- include/asm-m68k/byteorder.h Byte order functions
35- include/asm-m68k/fec.h FEC structure and definition
36- include/asm-m68k/fsl_i2c.h I2C structure and definition
37- include/asm-m68k/global_data.h Global data structure
38- include/asm-m68k/immap.h ColdFire specific header file and driver macros
39- include/asm-m68k/immap_5301x.h mcf5301x specific header file
40- include/asm-m68k/io.h io functions
41- include/asm-m68k/m532x.h mcf5301x specific header file
42- include/asm-m68k/posix_types.h Posix
43- include/asm-m68k/processor.h header file
44- include/asm-m68k/ptrace.h Exception structure
45- include/asm-m68k/rtc.h Realtime clock header file
46- include/asm-m68k/string.h String function export
47- include/asm-m68k/timer.h Timer structure and definition
48- include/asm-m68k/types.h Data types definition
49- include/asm-m68k/uart.h Uart structure and definition
50- include/asm-m68k/u-boot.h u-boot structure
51
52- include/configs/M53017EVB.h Board specific configuration file
53
Peter Tyserea0364f2010-04-12 22:28:04 -050054- arch/m68k/lib/board.c board init function
55- arch/m68k/lib/cache.c
56- arch/m68k/lib/interrupts Coldfire common interrupt functions
57- arch/m68k/lib/m68k_linux.c
58- arch/m68k/lib/time.c Timer functions (Dma timer and PIT)
59- arch/m68k/lib/traps.c Exception init code
TsiChung Liew536e7da2008-10-22 11:38:21 +000060
611 MCF5301x specific Options/Settings
62====================================
631.1 pre-loader is no longer suppoer in thie coldfire family
64
651.2 Configuration settings for M53017EVB Development Board
66CONFIG_MCF5301x -- define for all MCF5301x CPUs
67CONFIG_M53015 -- define for MCF53015 CPUs
68CONFIG_M53017EVB -- define for M53017EVB board
69
70CONFIG_MCFUART -- define to use common CF Uart driver
71CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
72CONFIG_BAUDRATE -- define UART baudrate
73
74CONFIG_MCFRTC -- define to use common CF RTC driver
75CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h
76CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency
77RTC_DEBUG -- define to show RTC debug message
78CONFIG_CMD_DATE -- enable to use date feature in u-boot
79
80CONFIG_MCFFEC -- define to use common CF FEC driver
81CONFIG_NET_MULTI -- define to use multi FEC in u-boot
82CONFIG_MII -- enable to use MII driver
83CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
84CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
85CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer
86CONFIG_SYS_FAULT_ECHO_LINK_DOWN --
87CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration
88CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
89MCFFEC_TOUT_LOOP -- set FEC timeout loop
90
91CONFIG_MCFTMR -- define to use DMA timer
92CONFIG_MCFPIT -- define to use PIT timer
93
94CONFIG_FSL_I2C -- define to use FSL common I2C driver
95CONFIG_HARD_I2C -- define for I2C hardware support
96CONFIG_SOFT_I2C -- define for I2C bit-banged
97CONFIG_SYS_I2C_SPEED -- define for I2C speed
98CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
99CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
100CONFIG_SYS_IMMR -- define for MBAR offset
101
102CONFIG_SYS_MBAR -- define MBAR offset
103
104CONFIG_MONITOR_IS_IN_RAM -- Not support
105
106CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5301x internal SRAM
107
108CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
109CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
110CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
111
112CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
113
1142. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
115===========================================
1162.1. System memory map:
117 Flash: 0x00000000-0x3FFFFFFF (1024MB)
118 DDR: 0x40000000-0x7FFFFFFF (1024MB)
119 SRAM: 0x80000000-0x8FFFFFFF (256MB)
120 IP: 0xFC000000-0xFFFFFFFF (256MB)
121
1222.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
123 linux kernel, you can customize it based on your system requirements:
124 Flash0: 0x00000000-0x00FFFFFF (16MB)
125 DDR: 0x40000000-0x4FFFFFFF (256MB)
126 SRAM: 0x80000000-0x80007FFF (32KB)
127 IP: 0xFC000000-0xFC0FFFFF (64KB)
128
1293. COMPILATION
130==============
1313.1 To create U-Boot the gcc-4.x-xx compiler set (ColdFire ELF or
132uClinux version) from codesourcery.com was used. Download it from:
133http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
134
1353.2 Compilation
136 export CROSS_COMPILE=cross-compile-prefix
137 cd u-boot
138 make distclean
139 make M53017EVB_config
140 make
141
1424. SCREEN DUMP
143==============
1444.1 M53017EVB Development board
145 (NOTE: May not show exactly the same)
146
147U-Boot 2008.10 (Oct 22 2007 - 11:07:57)
148
149CPU: Freescale MCF53015 (Mask:76 Version:0)
150 CPU CLK 240 Mhz BUS CLK 80 Mhz
151Board: Freescale M53017EVB
152I2C: ready
153DRAM: 64 MB
154FLASH: 16 MB
155In: serial
156Out: serial
157Err: serial
158NAND: 16 MiB
159Net: FEC0, FEC1
160-> print
161bootdelay=1
162baudrate=115200
163ethaddr=00:e0:0c:bc:e5:60
164hostname=M53017EVB
165netdev=eth0
166loadaddr=40010000
167u-boot=u-boot.bin
168load=tftp ${loadaddr) ${u-boot}
169upd=run load; run prog
170prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
171gatewayip=192.168.1.1
172netmask=255.255.255.0
173ipaddr=192.168.1.3
174serverip=192.168.1.2
175stdin=serial
176stdout=serial
177stderr=serial
178mem=65024k
179
180Environment size: 437/4092 bytes
181->