Masahiro Yamada | 238bd0b | 2015-01-13 12:44:37 +0900 | [diff] [blame] | 1 | /* |
Masahiro Yamada | f6e7f07 | 2015-05-29 17:30:00 +0900 | [diff] [blame^] | 2 | * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com> |
Masahiro Yamada | 238bd0b | 2015-01-13 12:44:37 +0900 | [diff] [blame] | 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | |
| 7 | #include <common.h> |
| 8 | #include <linux/types.h> |
Masahiro Yamada | f6e7f07 | 2015-05-29 17:30:00 +0900 | [diff] [blame^] | 9 | #include <linux/io.h> |
Masahiro Yamada | 238bd0b | 2015-01-13 12:44:37 +0900 | [diff] [blame] | 10 | #include <asm/errno.h> |
| 11 | #include <dm/device.h> |
| 12 | #include <dm/root.h> |
| 13 | #include <i2c.h> |
| 14 | #include <fdtdec.h> |
Joe Hershberger | 0eb25b6 | 2015-03-22 17:08:59 -0500 | [diff] [blame] | 15 | #include <mapmem.h> |
Masahiro Yamada | 238bd0b | 2015-01-13 12:44:37 +0900 | [diff] [blame] | 16 | |
| 17 | DECLARE_GLOBAL_DATA_PTR; |
| 18 | |
| 19 | struct uniphier_fi2c_regs { |
| 20 | u32 cr; /* control register */ |
| 21 | #define I2C_CR_MST (1 << 3) /* master mode */ |
| 22 | #define I2C_CR_STA (1 << 2) /* start condition */ |
| 23 | #define I2C_CR_STO (1 << 1) /* stop condition */ |
| 24 | #define I2C_CR_NACK (1 << 0) /* not ACK */ |
| 25 | u32 dttx; /* send FIFO (write-only) */ |
| 26 | #define dtrx dttx /* receive FIFO (read-only) */ |
| 27 | #define I2C_DTTX_CMD (1 << 8) /* send command (slave addr) */ |
| 28 | #define I2C_DTTX_RD (1 << 0) /* read */ |
| 29 | u32 __reserved; /* no register at offset 0x08 */ |
| 30 | u32 slad; /* slave address */ |
| 31 | u32 cyc; /* clock cycle control */ |
| 32 | u32 lctl; /* clock low period control */ |
| 33 | u32 ssut; /* restart/stop setup time control */ |
| 34 | u32 dsut; /* data setup time control */ |
| 35 | u32 intr; /* interrupt status */ |
| 36 | u32 ie; /* interrupt enable */ |
| 37 | u32 ic; /* interrupt clear */ |
| 38 | #define I2C_INT_TE (1 << 9) /* TX FIFO empty */ |
| 39 | #define I2C_INT_RB (1 << 4) /* received specified bytes */ |
| 40 | #define I2C_INT_NA (1 << 2) /* no answer */ |
| 41 | #define I2C_INT_AL (1 << 1) /* arbitration lost */ |
| 42 | u32 sr; /* status register */ |
| 43 | #define I2C_SR_DB (1 << 12) /* device busy */ |
| 44 | #define I2C_SR_BB (1 << 8) /* bus busy */ |
| 45 | #define I2C_SR_RFF (1 << 3) /* Rx FIFO full */ |
| 46 | #define I2C_SR_RNE (1 << 2) /* Rx FIFO not empty */ |
| 47 | #define I2C_SR_TNF (1 << 1) /* Tx FIFO not full */ |
| 48 | #define I2C_SR_TFE (1 << 0) /* Tx FIFO empty */ |
| 49 | u32 __reserved2; /* no register at offset 0x30 */ |
| 50 | u32 rst; /* reset control */ |
| 51 | #define I2C_RST_TBRST (1 << 2) /* clear Tx FIFO */ |
| 52 | #define I2C_RST_RBRST (1 << 1) /* clear Rx FIFO */ |
| 53 | #define I2C_RST_RST (1 << 0) /* forcible bus reset */ |
| 54 | u32 bm; /* bus monitor */ |
| 55 | u32 noise; /* noise filter control */ |
| 56 | u32 tbc; /* Tx byte count setting */ |
| 57 | u32 rbc; /* Rx byte count setting */ |
| 58 | u32 tbcm; /* Tx byte count monitor */ |
| 59 | u32 rbcm; /* Rx byte count monitor */ |
| 60 | u32 brst; /* bus reset */ |
| 61 | #define I2C_BRST_FOEN (1 << 1) /* normal operation */ |
| 62 | #define I2C_BRST_RSCLO (1 << 0) /* release SCL low fixing */ |
| 63 | }; |
| 64 | |
| 65 | #define FIOCLK 50000000 |
| 66 | |
| 67 | struct uniphier_fi2c_dev { |
| 68 | struct uniphier_fi2c_regs __iomem *regs; /* register base */ |
| 69 | unsigned long fioclk; /* internal operation clock */ |
| 70 | unsigned long timeout; /* time out (us) */ |
| 71 | }; |
| 72 | |
| 73 | static int poll_status(u32 __iomem *reg, u32 flag) |
| 74 | { |
| 75 | int wait = 1000000; /* 1 sec is long enough */ |
| 76 | |
| 77 | while (readl(reg) & flag) { |
| 78 | if (wait-- < 0) |
| 79 | return -EREMOTEIO; |
| 80 | udelay(1); |
| 81 | } |
| 82 | |
| 83 | return 0; |
| 84 | } |
| 85 | |
| 86 | static int reset_bus(struct uniphier_fi2c_regs __iomem *regs) |
| 87 | { |
| 88 | int ret; |
| 89 | |
| 90 | /* bus forcible reset */ |
| 91 | writel(I2C_RST_RST, ®s->rst); |
| 92 | ret = poll_status(®s->rst, I2C_RST_RST); |
| 93 | if (ret < 0) |
| 94 | debug("error: fail to reset I2C controller\n"); |
| 95 | |
| 96 | return ret; |
| 97 | } |
| 98 | |
| 99 | static int check_device_busy(struct uniphier_fi2c_regs __iomem *regs) |
| 100 | { |
| 101 | int ret; |
| 102 | |
| 103 | ret = poll_status(®s->sr, I2C_SR_DB); |
| 104 | if (ret < 0) { |
| 105 | debug("error: device busy too long. reset...\n"); |
| 106 | ret = reset_bus(regs); |
| 107 | } |
| 108 | |
| 109 | return ret; |
| 110 | } |
| 111 | |
| 112 | static int uniphier_fi2c_probe(struct udevice *dev) |
| 113 | { |
| 114 | fdt_addr_t addr; |
| 115 | fdt_size_t size; |
| 116 | struct uniphier_fi2c_dev *priv = dev_get_priv(dev); |
| 117 | int ret; |
| 118 | |
| 119 | addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg", |
| 120 | &size); |
| 121 | |
| 122 | priv->regs = map_sysmem(addr, size); |
| 123 | |
| 124 | if (!priv->regs) |
| 125 | return -ENOMEM; |
| 126 | |
| 127 | priv->fioclk = FIOCLK; |
| 128 | |
| 129 | /* bus forcible reset */ |
| 130 | ret = reset_bus(priv->regs); |
| 131 | if (ret < 0) |
| 132 | return ret; |
| 133 | |
| 134 | writel(I2C_BRST_FOEN | I2C_BRST_RSCLO, &priv->regs->brst); |
| 135 | |
| 136 | return 0; |
| 137 | } |
| 138 | |
| 139 | static int uniphier_fi2c_remove(struct udevice *dev) |
| 140 | { |
| 141 | struct uniphier_fi2c_dev *priv = dev_get_priv(dev); |
| 142 | |
| 143 | unmap_sysmem(priv->regs); |
| 144 | |
| 145 | return 0; |
| 146 | } |
| 147 | |
Masahiro Yamada | 238bd0b | 2015-01-13 12:44:37 +0900 | [diff] [blame] | 148 | static int wait_for_irq(struct uniphier_fi2c_dev *dev, u32 flags, |
| 149 | bool *stop) |
| 150 | { |
| 151 | u32 irq; |
| 152 | unsigned long wait = dev->timeout; |
| 153 | int ret = -EREMOTEIO; |
| 154 | |
| 155 | do { |
| 156 | udelay(1); |
| 157 | irq = readl(&dev->regs->intr); |
| 158 | } while (!(irq & flags) && wait--); |
| 159 | |
| 160 | if (wait < 0) { |
| 161 | debug("error: time out\n"); |
| 162 | return ret; |
| 163 | } |
| 164 | |
| 165 | if (irq & I2C_INT_AL) { |
| 166 | debug("error: arbitration lost\n"); |
| 167 | *stop = false; |
| 168 | return ret; |
| 169 | } |
| 170 | |
| 171 | if (irq & I2C_INT_NA) { |
| 172 | debug("error: no answer\n"); |
| 173 | return ret; |
| 174 | } |
| 175 | |
| 176 | return 0; |
| 177 | } |
| 178 | |
| 179 | static int issue_stop(struct uniphier_fi2c_dev *dev, int old_ret) |
| 180 | { |
| 181 | int ret; |
| 182 | |
| 183 | debug("stop condition\n"); |
| 184 | writel(I2C_CR_MST | I2C_CR_STO, &dev->regs->cr); |
| 185 | |
| 186 | ret = poll_status(&dev->regs->sr, I2C_SR_DB); |
| 187 | if (ret < 0) |
| 188 | debug("error: device busy after operation\n"); |
| 189 | |
| 190 | return old_ret ? old_ret : ret; |
| 191 | } |
| 192 | |
| 193 | static int uniphier_fi2c_transmit(struct uniphier_fi2c_dev *dev, uint addr, |
| 194 | uint len, const u8 *buf, bool *stop) |
| 195 | { |
| 196 | int ret; |
| 197 | const u32 irq_flags = I2C_INT_TE | I2C_INT_NA | I2C_INT_AL; |
| 198 | struct uniphier_fi2c_regs __iomem *regs = dev->regs; |
| 199 | |
| 200 | debug("%s: addr = %x, len = %d\n", __func__, addr, len); |
| 201 | |
| 202 | writel(I2C_DTTX_CMD | addr << 1, ®s->dttx); |
| 203 | |
| 204 | writel(irq_flags, ®s->ie); |
| 205 | writel(irq_flags, ®s->ic); |
| 206 | |
| 207 | debug("start condition\n"); |
| 208 | writel(I2C_CR_MST | I2C_CR_STA, ®s->cr); |
| 209 | |
| 210 | ret = wait_for_irq(dev, irq_flags, stop); |
| 211 | if (ret < 0) |
| 212 | goto error; |
| 213 | |
| 214 | while (len--) { |
| 215 | debug("sending %x\n", *buf); |
| 216 | writel(*buf++, ®s->dttx); |
| 217 | |
| 218 | writel(irq_flags, ®s->ic); |
| 219 | |
| 220 | ret = wait_for_irq(dev, irq_flags, stop); |
| 221 | if (ret < 0) |
| 222 | goto error; |
| 223 | } |
| 224 | |
| 225 | error: |
| 226 | writel(irq_flags, ®s->ic); |
| 227 | |
| 228 | if (*stop) |
| 229 | ret = issue_stop(dev, ret); |
| 230 | |
| 231 | return ret; |
| 232 | } |
| 233 | |
| 234 | static int uniphier_fi2c_receive(struct uniphier_fi2c_dev *dev, uint addr, |
| 235 | uint len, u8 *buf, bool *stop) |
| 236 | { |
| 237 | int ret = 0; |
| 238 | const u32 irq_flags = I2C_INT_RB | I2C_INT_NA | I2C_INT_AL; |
| 239 | struct uniphier_fi2c_regs __iomem *regs = dev->regs; |
| 240 | |
| 241 | debug("%s: addr = %x, len = %d\n", __func__, addr, len); |
| 242 | |
| 243 | /* |
| 244 | * In case 'len == 0', only the slave address should be sent |
| 245 | * for probing, which is covered by the transmit function. |
| 246 | */ |
| 247 | if (len == 0) |
| 248 | return uniphier_fi2c_transmit(dev, addr, len, buf, stop); |
| 249 | |
| 250 | writel(I2C_DTTX_CMD | I2C_DTTX_RD | addr << 1, ®s->dttx); |
| 251 | |
| 252 | writel(0, ®s->rbc); |
| 253 | writel(irq_flags, ®s->ie); |
| 254 | writel(irq_flags, ®s->ic); |
| 255 | |
| 256 | debug("start condition\n"); |
| 257 | writel(I2C_CR_MST | I2C_CR_STA | (len == 1 ? I2C_CR_NACK : 0), |
| 258 | ®s->cr); |
| 259 | |
| 260 | while (len--) { |
| 261 | ret = wait_for_irq(dev, irq_flags, stop); |
| 262 | if (ret < 0) |
| 263 | goto error; |
| 264 | |
| 265 | *buf++ = readl(®s->dtrx); |
| 266 | debug("received %x\n", *(buf - 1)); |
| 267 | |
| 268 | if (len == 1) |
| 269 | writel(I2C_CR_MST | I2C_CR_NACK, ®s->cr); |
| 270 | |
| 271 | writel(irq_flags, ®s->ic); |
| 272 | } |
| 273 | |
| 274 | error: |
| 275 | writel(irq_flags, ®s->ic); |
| 276 | |
| 277 | if (*stop) |
| 278 | ret = issue_stop(dev, ret); |
| 279 | |
| 280 | return ret; |
| 281 | } |
| 282 | |
| 283 | static int uniphier_fi2c_xfer(struct udevice *bus, struct i2c_msg *msg, |
| 284 | int nmsgs) |
| 285 | { |
| 286 | int ret; |
| 287 | struct uniphier_fi2c_dev *dev = dev_get_priv(bus); |
| 288 | bool stop; |
| 289 | |
| 290 | ret = check_device_busy(dev->regs); |
| 291 | if (ret < 0) |
| 292 | return ret; |
| 293 | |
| 294 | for (; nmsgs > 0; nmsgs--, msg++) { |
| 295 | /* If next message is read, skip the stop condition */ |
| 296 | stop = nmsgs > 1 && msg[1].flags & I2C_M_RD ? false : true; |
| 297 | |
| 298 | if (msg->flags & I2C_M_RD) |
| 299 | ret = uniphier_fi2c_receive(dev, msg->addr, msg->len, |
| 300 | msg->buf, &stop); |
| 301 | else |
| 302 | ret = uniphier_fi2c_transmit(dev, msg->addr, msg->len, |
| 303 | msg->buf, &stop); |
| 304 | |
| 305 | if (ret < 0) |
| 306 | break; |
| 307 | } |
| 308 | |
| 309 | return ret; |
| 310 | } |
| 311 | |
| 312 | static int uniphier_fi2c_set_bus_speed(struct udevice *bus, unsigned int speed) |
| 313 | { |
| 314 | int ret; |
| 315 | unsigned int clk_count; |
| 316 | struct uniphier_fi2c_dev *dev = dev_get_priv(bus); |
| 317 | struct uniphier_fi2c_regs __iomem *regs = dev->regs; |
| 318 | |
| 319 | /* max supported frequency is 400 kHz */ |
| 320 | if (speed > 400000) |
| 321 | return -EINVAL; |
| 322 | |
| 323 | ret = check_device_busy(dev->regs); |
| 324 | if (ret < 0) |
| 325 | return ret; |
| 326 | |
| 327 | /* make sure the bus is idle when changing the frequency */ |
| 328 | writel(I2C_BRST_RSCLO, ®s->brst); |
| 329 | |
| 330 | clk_count = dev->fioclk / speed; |
| 331 | |
| 332 | writel(clk_count, ®s->cyc); |
| 333 | writel(clk_count / 2, ®s->lctl); |
| 334 | writel(clk_count / 2, ®s->ssut); |
| 335 | writel(clk_count / 16, ®s->dsut); |
| 336 | |
| 337 | writel(I2C_BRST_FOEN | I2C_BRST_RSCLO, ®s->brst); |
| 338 | |
| 339 | /* |
| 340 | * Theoretically, each byte can be transferred in |
| 341 | * 1000000 * 9 / speed usec. |
| 342 | * This time out value is long enough. |
| 343 | */ |
| 344 | dev->timeout = 100000000L / speed; |
| 345 | |
| 346 | return 0; |
| 347 | } |
| 348 | |
| 349 | static const struct dm_i2c_ops uniphier_fi2c_ops = { |
| 350 | .xfer = uniphier_fi2c_xfer, |
| 351 | .set_bus_speed = uniphier_fi2c_set_bus_speed, |
| 352 | }; |
| 353 | |
| 354 | static const struct udevice_id uniphier_fi2c_of_match[] = { |
Masahiro Yamada | 6462cde | 2015-03-11 15:54:46 +0900 | [diff] [blame] | 355 | { .compatible = "socionext,uniphier-fi2c" }, |
| 356 | { /* sentinel */ } |
Masahiro Yamada | 238bd0b | 2015-01-13 12:44:37 +0900 | [diff] [blame] | 357 | }; |
| 358 | |
| 359 | U_BOOT_DRIVER(uniphier_fi2c) = { |
| 360 | .name = "uniphier-fi2c", |
| 361 | .id = UCLASS_I2C, |
| 362 | .of_match = uniphier_fi2c_of_match, |
| 363 | .probe = uniphier_fi2c_probe, |
| 364 | .remove = uniphier_fi2c_remove, |
Masahiro Yamada | 238bd0b | 2015-01-13 12:44:37 +0900 | [diff] [blame] | 365 | .priv_auto_alloc_size = sizeof(struct uniphier_fi2c_dev), |
| 366 | .ops = &uniphier_fi2c_ops, |
| 367 | }; |