blob: 41079e834549d5c677e9942a383427604c21d4d8 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Stefanbfacf462011-12-23 06:35:04 +00002/*
3 * Copyright (C) 2011
Stefan Herbrechtsmeier16437a12014-12-28 14:09:50 +01004 * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Stefanbfacf462011-12-23 06:35:04 +00005 *
6 * Based on Kirkwood support:
7 * (C) Copyright 2009
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
Stefanbfacf462011-12-23 06:35:04 +000010 */
11
12#ifndef _CONFIG_DNS325_H
13#define _CONFIG_DNS325_H
14
15/*
16 * Machine number definition
17 */
Stefanbfacf462011-12-23 06:35:04 +000018#define CONFIG_MACH_TYPE MACH_TYPE_DNS325
Stefanbfacf462011-12-23 06:35:04 +000019
20/*
21 * High Level Configuration Options (easy to change)
22 */
23#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
Stefanbfacf462011-12-23 06:35:04 +000024#define CONFIG_KW88F6281 /* SOC Name */
25#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
26
27/*
28 * Commands configuration
29 */
Stefanbfacf462011-12-23 06:35:04 +000030
Stefanbfacf462011-12-23 06:35:04 +000031/*
32 * mv-common.h should be defined after CMD configs since it used them
33 * to enable certain macros
34 */
35#include "mv-common.h"
36
37/* Remove or override few declarations from mv-common.h */
Stefanbfacf462011-12-23 06:35:04 +000038
39/*
40 * Ethernet Driver configuration
41 */
42#ifdef CONFIG_CMD_NET
43#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
44#define CONFIG_NETCONSOLE
45#endif
46
47/*
48 * SATA Driver configuration
49 */
50#ifdef CONFIG_MVSATA_IDE
51#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
52#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
53#endif
54
55/*
Stefanbfacf462011-12-23 06:35:04 +000056 * Enable GPI0 support
57 */
58#define CONFIG_KIRKWOOD_GPIO
59
60/*
Stefanbfacf462011-12-23 06:35:04 +000061 * Environment variables configurations
62 */
Stefanbfacf462011-12-23 06:35:04 +000063
64/*
65 * Default environment variables
66 */
Stefanbfacf462011-12-23 06:35:04 +000067
68#define CONFIG_EXTRA_ENV_SETTINGS \
69 "stdin=serial\0" \
70 "stdout=serial\0" \
71 "stderr=serial\0" \
72 "loadaddr=0x800000\0" \
73 "autoload=no\0" \
74 "console=ttyS0,115200\0" \
Tom Rini43ede0b2017-10-22 17:55:07 -040075 "mtdparts="CONFIG_MTDPARTS_DEFAULT \
Stefanbfacf462011-12-23 06:35:04 +000076 "optargs=\0" \
77 "bootenv=uEnv.txt\0" \
78 "importbootenv=echo Importing environment ...; " \
79 "env import -t ${loadaddr} ${filesize}\0" \
80 "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
81 "setbootargs=setenv bootargs console=${console} " \
82 "${optargs} " \
83 "${mtdparts} " \
84 "root=${bootenvroot} " \
85 "rootfstype=${bootenvrootfstype}\0" \
86 "subbootcmd=run setbootargs; " \
87 "if run bootenvloadimage; then " \
88 "bootm ${loadaddr};" \
89 "fi;\0" \
90 "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
91 "nandrootfstype=ubifs\0" \
92 "nandloadimage=nand read ${loadaddr} kernel\0" \
93 "setnandbootenv=echo Booting from nand ...; " \
94 "setenv bootenvroot ${nandroot}; " \
95 "setenv bootenvrootfstype ${nandrootfstype}; " \
96 "setenv bootenvloadimage ${nandloadimage}\0"
97
98#define CONFIG_BOOTCOMMAND \
99 "if test -n ${bootenv} && usb start; then " \
100 "if run loadbootenv; then " \
101 "echo Loaded environment ${bootenv} from usb;" \
102 "run importbootenv;" \
103 "fi;" \
104 "if test -n ${bootenvcmd}; then " \
105 "echo Running bootenvcmd ...;" \
106 "run bootenvcmd;" \
107 "fi;" \
108 "fi;" \
109 "run setnandbootenv subbootcmd;"
110
111#endif /* _CONFIG_DNS325_H */