blob: 7ed0c10f72ee7e342de3776668357bfc2db079a6 [file] [log] [blame]
maxims@google.com4dc038f2017-04-17 12:00:30 -07001/*
2 * Copyright (C) 2012-2020 ASPEED Technology Inc.
3 * Copyright 2016 IBM Corporation
4 * Copyright 2017 Google, Inc.
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#include <common.h>
10#include <clk.h>
11#include <dm.h>
12#include <errno.h>
13#include <fdtdec.h>
14#include <i2c.h>
15#include <asm/io.h>
16#include <asm/arch/scu_ast2500.h>
17
18#include "ast_i2c.h"
19
20#define I2C_TIMEOUT_US 100000
21#define I2C_SLEEP_STEP_US 20
22
23#define HIGHSPEED_TTIMEOUT 3
24
25DECLARE_GLOBAL_DATA_PTR;
26
27/*
28 * Device private data
29 */
30struct ast_i2c_priv {
31 /* This device's clock */
32 struct clk clk;
33 /* Device registers */
34 struct ast_i2c_regs *regs;
35 /* I2C speed in Hz */
36 int speed;
37};
38
39/*
40 * Given desired divider ratio, return the value that needs to be set
41 * in Clock and AC Timing Control register
42 */
43static u32 get_clk_reg_val(ulong divider_ratio)
44{
45 ulong inc = 0, div;
46 ulong scl_low, scl_high, data;
47
48 for (div = 0; divider_ratio >= 16; div++) {
49 inc |= (divider_ratio & 1);
50 divider_ratio >>= 1;
51 }
52 divider_ratio += inc;
53 scl_low = (divider_ratio >> 1) - 1;
54 scl_high = divider_ratio - scl_low - 2;
55 data = I2CD_CACTC_BASE
56 | (scl_high << I2CD_TCKHIGH_SHIFT)
57 | (scl_low << I2CD_TCKLOW_SHIFT)
58 | (div << I2CD_BASE_DIV_SHIFT);
59
60 return data;
61}
62
63static void ast_i2c_clear_interrupts(struct udevice *dev)
64{
65 struct ast_i2c_priv *priv = dev_get_priv(dev);
66
67 writel(~0, &priv->regs->isr);
68}
69
70static void ast_i2c_init_bus(struct udevice *dev)
71{
72 struct ast_i2c_priv *priv = dev_get_priv(dev);
73
74 /* Reset device */
75 writel(0, &priv->regs->fcr);
76 /* Enable Master Mode. Assuming single-master */
77 writel(I2CD_MASTER_EN
78 | I2CD_M_SDA_LOCK_EN
79 | I2CD_MULTI_MASTER_DIS | I2CD_M_SCL_DRIVE_EN,
80 &priv->regs->fcr);
81 /* Enable Interrupts */
82 writel(I2CD_INTR_TX_ACK
83 | I2CD_INTR_TX_NAK
84 | I2CD_INTR_RX_DONE
85 | I2CD_INTR_BUS_RECOVER_DONE
86 | I2CD_INTR_NORMAL_STOP
87 | I2CD_INTR_ABNORMAL, &priv->regs->icr);
88}
89
90static int ast_i2c_ofdata_to_platdata(struct udevice *dev)
91{
92 struct ast_i2c_priv *priv = dev_get_priv(dev);
93 int ret;
94
Simon Glassa821c4a2017-05-17 17:18:05 -060095 priv->regs = devfdt_get_addr_ptr(dev);
maxims@google.com4dc038f2017-04-17 12:00:30 -070096 if (IS_ERR(priv->regs))
97 return PTR_ERR(priv->regs);
98
99 ret = clk_get_by_index(dev, 0, &priv->clk);
100 if (ret < 0) {
101 debug("%s: Can't get clock for %s: %d\n", __func__, dev->name,
102 ret);
103 return ret;
104 }
105
106 return 0;
107}
108
109static int ast_i2c_probe(struct udevice *dev)
110{
111 struct ast2500_scu *scu;
112
113 debug("Enabling I2C%u\n", dev->seq);
114
115 /*
116 * Get all I2C devices out of Reset.
117 * Only needs to be done once, but doing it for every
118 * device does not hurt.
119 */
120 scu = ast_get_scu();
121 ast_scu_unlock(scu);
122 clrbits_le32(&scu->sysreset_ctrl1, SCU_SYSRESET_I2C);
123 ast_scu_lock(scu);
124
125 ast_i2c_init_bus(dev);
126
127 return 0;
128}
129
130static int ast_i2c_wait_isr(struct udevice *dev, u32 flag)
131{
132 struct ast_i2c_priv *priv = dev_get_priv(dev);
133 int timeout = I2C_TIMEOUT_US;
134
135 while (!(readl(&priv->regs->isr) & flag) && timeout > 0) {
136 udelay(I2C_SLEEP_STEP_US);
137 timeout -= I2C_SLEEP_STEP_US;
138 }
139
140 ast_i2c_clear_interrupts(dev);
141 if (timeout <= 0)
142 return -ETIMEDOUT;
143
144 return 0;
145}
146
147static int ast_i2c_send_stop(struct udevice *dev)
148{
149 struct ast_i2c_priv *priv = dev_get_priv(dev);
150
151 writel(I2CD_M_STOP_CMD, &priv->regs->csr);
152
153 return ast_i2c_wait_isr(dev, I2CD_INTR_NORMAL_STOP);
154}
155
156static int ast_i2c_wait_tx(struct udevice *dev)
157{
158 struct ast_i2c_priv *priv = dev_get_priv(dev);
159 int timeout = I2C_TIMEOUT_US;
160 u32 flag = I2CD_INTR_TX_ACK | I2CD_INTR_TX_NAK;
161 u32 status = readl(&priv->regs->isr) & flag;
162 int ret = 0;
163
164 while (!status && timeout > 0) {
165 status = readl(&priv->regs->isr) & flag;
166 udelay(I2C_SLEEP_STEP_US);
167 timeout -= I2C_SLEEP_STEP_US;
168 }
169
170 if (status == I2CD_INTR_TX_NAK)
171 ret = -EREMOTEIO;
172
173 if (timeout <= 0)
174 ret = -ETIMEDOUT;
175
176 ast_i2c_clear_interrupts(dev);
177
178 return ret;
179}
180
181static int ast_i2c_start_txn(struct udevice *dev, uint devaddr)
182{
183 struct ast_i2c_priv *priv = dev_get_priv(dev);
184
185 /* Start and Send Device Address */
186 writel(devaddr, &priv->regs->trbbr);
187 writel(I2CD_M_START_CMD | I2CD_M_TX_CMD, &priv->regs->csr);
188
189 return ast_i2c_wait_tx(dev);
190}
191
192static int ast_i2c_read_data(struct udevice *dev, u8 chip_addr, u8 *buffer,
193 size_t len, bool send_stop)
194{
195 struct ast_i2c_priv *priv = dev_get_priv(dev);
196 u32 i2c_cmd = I2CD_M_RX_CMD;
197 int ret;
198
199 ret = ast_i2c_start_txn(dev, (chip_addr << 1) | I2C_M_RD);
200 if (ret < 0)
201 return ret;
202
203 for (; len > 0; len--, buffer++) {
204 if (len == 1)
205 i2c_cmd |= I2CD_M_S_RX_CMD_LAST;
206 writel(i2c_cmd, &priv->regs->csr);
207 ret = ast_i2c_wait_isr(dev, I2CD_INTR_RX_DONE);
208 if (ret < 0)
209 return ret;
210 *buffer = (readl(&priv->regs->trbbr) & I2CD_RX_DATA_MASK)
211 >> I2CD_RX_DATA_SHIFT;
212 }
213 ast_i2c_clear_interrupts(dev);
214
215 if (send_stop)
216 return ast_i2c_send_stop(dev);
217
218 return 0;
219}
220
221static int ast_i2c_write_data(struct udevice *dev, u8 chip_addr, u8
222 *buffer, size_t len, bool send_stop)
223{
224 struct ast_i2c_priv *priv = dev_get_priv(dev);
225 int ret;
226
227 ret = ast_i2c_start_txn(dev, (chip_addr << 1));
228 if (ret < 0)
229 return ret;
230
231 for (; len > 0; len--, buffer++) {
232 writel(*buffer, &priv->regs->trbbr);
233 writel(I2CD_M_TX_CMD, &priv->regs->csr);
234 ret = ast_i2c_wait_tx(dev);
235 if (ret < 0)
236 return ret;
237 }
238
239 if (send_stop)
240 return ast_i2c_send_stop(dev);
241
242 return 0;
243}
244
245static int ast_i2c_deblock(struct udevice *dev)
246{
247 struct ast_i2c_priv *priv = dev_get_priv(dev);
248 struct ast_i2c_regs *regs = priv->regs;
249 u32 csr = readl(&regs->csr);
250 bool sda_high = csr & I2CD_SDA_LINE_STS;
251 bool scl_high = csr & I2CD_SCL_LINE_STS;
252 int ret = 0;
253
254 if (sda_high && scl_high) {
255 /* Bus is idle, no deblocking needed. */
256 return 0;
257 } else if (sda_high) {
258 /* Send stop command */
259 debug("Unterminated TXN in (%x), sending stop\n", csr);
260 ret = ast_i2c_send_stop(dev);
261 } else if (scl_high) {
262 /* Possibly stuck slave */
263 debug("Bus stuck (%x), attempting recovery\n", csr);
264 writel(I2CD_BUS_RECOVER_CMD, &regs->csr);
265 ret = ast_i2c_wait_isr(dev, I2CD_INTR_BUS_RECOVER_DONE);
266 } else {
267 /* Just try to reinit the device. */
268 ast_i2c_init_bus(dev);
269 }
270
271 return ret;
272}
273
274static int ast_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs)
275{
276 int ret;
277
278 ret = ast_i2c_deblock(dev);
279 if (ret < 0)
280 return ret;
281
282 debug("i2c_xfer: %d messages\n", nmsgs);
283 for (; nmsgs > 0; nmsgs--, msg++) {
284 if (msg->flags & I2C_M_RD) {
285 debug("i2c_read: chip=0x%x, len=0x%x, flags=0x%x\n",
286 msg->addr, msg->len, msg->flags);
287 ret = ast_i2c_read_data(dev, msg->addr, msg->buf,
288 msg->len, (nmsgs == 1));
289 } else {
290 debug("i2c_write: chip=0x%x, len=0x%x, flags=0x%x\n",
291 msg->addr, msg->len, msg->flags);
292 ret = ast_i2c_write_data(dev, msg->addr, msg->buf,
293 msg->len, (nmsgs == 1));
294 }
295 if (ret) {
296 debug("%s: error (%d)\n", __func__, ret);
297 return -EREMOTEIO;
298 }
299 }
300
301 return 0;
302}
303
304static int ast_i2c_set_speed(struct udevice *dev, unsigned int speed)
305{
306 struct ast_i2c_priv *priv = dev_get_priv(dev);
307 struct ast_i2c_regs *regs = priv->regs;
308 ulong i2c_rate, divider;
309
310 debug("Setting speed for I2C%d to <%u>\n", dev->seq, speed);
311 if (!speed) {
312 debug("No valid speed specified\n");
313 return -EINVAL;
314 }
315
316 i2c_rate = clk_get_rate(&priv->clk);
317 divider = i2c_rate / speed;
318
319 priv->speed = speed;
320 if (speed > I2C_HIGHSPEED_RATE) {
321 debug("Enable High Speed\n");
322 setbits_le32(&regs->fcr, I2CD_M_HIGH_SPEED_EN
323 | I2CD_M_SDA_DRIVE_1T_EN
324 | I2CD_SDA_DRIVE_1T_EN);
325 writel(HIGHSPEED_TTIMEOUT, &regs->cactcr2);
326 } else {
327 debug("Enabling Normal Speed\n");
328 writel(I2CD_NO_TIMEOUT_CTRL, &regs->cactcr2);
329 }
330
331 writel(get_clk_reg_val(divider), &regs->cactcr1);
332 ast_i2c_clear_interrupts(dev);
333
334 return 0;
335}
336
337static const struct dm_i2c_ops ast_i2c_ops = {
338 .xfer = ast_i2c_xfer,
339 .set_bus_speed = ast_i2c_set_speed,
340 .deblock = ast_i2c_deblock,
341};
342
343static const struct udevice_id ast_i2c_ids[] = {
344 { .compatible = "aspeed,ast2400-i2c-bus" },
345 { .compatible = "aspeed,ast2500-i2c-bus" },
346 { },
347};
348
349U_BOOT_DRIVER(ast_i2c) = {
350 .name = "ast_i2c",
351 .id = UCLASS_I2C,
352 .of_match = ast_i2c_ids,
353 .probe = ast_i2c_probe,
354 .ofdata_to_platdata = ast_i2c_ofdata_to_platdata,
355 .priv_auto_alloc_size = sizeof(struct ast_i2c_priv),
356 .ops = &ast_i2c_ops,
357};