blob: be0bc228ec7179f05e85049f495660a5498171c6 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Stefano Babicdeb53482011-10-23 23:58:20 +00002/*
3 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
4 *
5 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
6 *
7 * Copyright (C) 2011, Stefano Babic <sbabic@denx.de>
Stefano Babicdeb53482011-10-23 23:58:20 +00008 */
9
10#include <common.h>
11#include <asm/io.h>
Simon Glass7b51b572019-08-01 09:46:52 -060012#include <env.h>
Masahiro Yamada1221ce42016-09-21 11:28:55 +090013#include <linux/errno.h>
Stefano Babicdeb53482011-10-23 23:58:20 +000014#include <asm/arch/imx-regs.h>
15#include <asm/arch/crm_regs.h>
Benoît Thébaudeau686e1442013-05-03 10:32:20 +000016#include <asm/arch/iomux-mx35.h>
Stefano Babicdeb53482011-10-23 23:58:20 +000017#include <i2c.h>
18#include <linux/types.h>
19#include <asm/gpio.h>
20#include <asm/arch/sys_proto.h>
21#include <netdev.h>
Heiko Schocher72c10152016-10-17 15:51:32 +020022#include <fdt_support.h>
23#include <mtd_node.h>
24#include <jffs2/load_kernel.h>
Stefano Babicdeb53482011-10-23 23:58:20 +000025
26#ifndef CONFIG_BOARD_EARLY_INIT_F
27#error "CONFIG_BOARD_EARLY_INIT_F must be set for this board"
28#endif
29
30#define CCM_CCMR_CONFIG 0x003F4208
31
32#define ESDCTL_DDR2_CONFIG 0x007FFC3F
Stefano Babicdeb53482011-10-23 23:58:20 +000033
34static inline void dram_wait(unsigned int count)
35{
36 volatile unsigned int wait = count;
37
38 while (wait--)
39 ;
40}
41
42DECLARE_GLOBAL_DATA_PTR;
43
44int dram_init(void)
45{
46 gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
47 PHYS_SDRAM_1_SIZE);
48
49 return 0;
50}
51
Stefano Babicdeb53482011-10-23 23:58:20 +000052static void board_setup_sdram(void)
53{
54 struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;
55
56 /* Initialize with default values both CSD0/1 */
57 writel(0x2000, &esdc->esdctl0);
58 writel(0x2000, &esdc->esdctl1);
59
Stefano Babic146fff32016-10-17 15:51:33 +020060
61 mx3_setup_sdram_bank(CSD0_BASE_ADDR, ESDCTL_DDR2_CONFIG,
62 13, 10, 2, 0x8080);
Stefano Babicdeb53482011-10-23 23:58:20 +000063}
64
65static void setup_iomux_uart3(void)
66{
Benoît Thébaudeau686e1442013-05-03 10:32:20 +000067 static const iomux_v3_cfg_t uart3_pads[] = {
68 MX35_PAD_RTS2__UART3_RXD_MUX,
69 MX35_PAD_CTS2__UART3_TXD_MUX,
70 };
71
72 imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
Stefano Babicdeb53482011-10-23 23:58:20 +000073}
74
Benoît Thébaudeau686e1442013-05-03 10:32:20 +000075#define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE)
76
Stefano Babicdeb53482011-10-23 23:58:20 +000077static void setup_iomux_i2c(void)
78{
Benoît Thébaudeau686e1442013-05-03 10:32:20 +000079 static const iomux_v3_cfg_t i2c_pads[] = {
80 NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL),
81 NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL),
Stefano Babicdeb53482011-10-23 23:58:20 +000082
Benoît Thébaudeau686e1442013-05-03 10:32:20 +000083 NEW_PAD_CTRL(MX35_PAD_TX3_RX2__I2C3_SCL, I2C_PAD_CTRL),
84 NEW_PAD_CTRL(MX35_PAD_TX2_RX3__I2C3_SDA, I2C_PAD_CTRL),
85 };
Stefano Babicdeb53482011-10-23 23:58:20 +000086
Benoît Thébaudeau686e1442013-05-03 10:32:20 +000087 imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
Stefano Babicdeb53482011-10-23 23:58:20 +000088}
89
90
91static void setup_iomux_spi(void)
92{
Benoît Thébaudeau686e1442013-05-03 10:32:20 +000093 static const iomux_v3_cfg_t spi_pads[] = {
94 MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
95 MX35_PAD_CSPI1_MISO__CSPI1_MISO,
96 MX35_PAD_CSPI1_SS0__CSPI1_SS0,
97 MX35_PAD_CSPI1_SS1__CSPI1_SS1,
98 MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
99 };
100
101 imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads));
Stefano Babicdeb53482011-10-23 23:58:20 +0000102}
103
104static void setup_iomux_fec(void)
105{
Benoît Thébaudeau686e1442013-05-03 10:32:20 +0000106 static const iomux_v3_cfg_t fec_pads[] = {
107 MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
108 MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
109 MX35_PAD_FEC_RX_DV__FEC_RX_DV,
110 MX35_PAD_FEC_COL__FEC_COL,
111 MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
112 MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
113 MX35_PAD_FEC_TX_EN__FEC_TX_EN,
114 MX35_PAD_FEC_MDC__FEC_MDC,
115 MX35_PAD_FEC_MDIO__FEC_MDIO,
116 MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
117 MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
118 MX35_PAD_FEC_CRS__FEC_CRS,
119 MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
120 MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
121 MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
122 MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
123 MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
124 MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
Stefano Babic322ac5f2016-10-17 15:51:34 +0200125 /* GPIO used to power off ethernet */
126 MX35_PAD_STXFS4__GPIO2_31,
Benoît Thébaudeau686e1442013-05-03 10:32:20 +0000127 };
Stefano Babicdeb53482011-10-23 23:58:20 +0000128
Benoît Thébaudeau686e1442013-05-03 10:32:20 +0000129 /* setup pins for FEC */
130 imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
Stefano Babicdeb53482011-10-23 23:58:20 +0000131}
132
133int board_early_init_f(void)
134{
135 struct ccm_regs *ccm =
136 (struct ccm_regs *)IMX_CCM_BASE;
137
138 /* setup GPIO3_1 to set HighVCore signal */
Benoît Thébaudeau686e1442013-05-03 10:32:20 +0000139 imx_iomux_v3_setup_pad(MX35_PAD_ATA_DA1__GPIO3_1);
Stefano Babicdeb53482011-10-23 23:58:20 +0000140 gpio_direction_output(65, 1);
141
142 /* initialize PLL and clock configuration */
143 writel(CCM_CCMR_CONFIG, &ccm->ccmr);
144
145 writel(CCM_MPLL_532_HZ, &ccm->mpctl);
146 writel(CCM_PPLL_300_HZ, &ccm->ppctl);
147
148 /* Set the core to run at 532 Mhz */
149 writel(0x00001000, &ccm->pdr0);
150
151 /* Set-up RAM */
152 board_setup_sdram();
153
154 /* enable clocks */
155 writel(readl(&ccm->cgr0) |
156 MXC_CCM_CGR0_EMI_MASK |
Benoît Thébaudeau34a31bf2012-08-14 03:28:24 +0000157 MXC_CCM_CGR0_EDIO_MASK |
Stefano Babicdeb53482011-10-23 23:58:20 +0000158 MXC_CCM_CGR0_EPIT1_MASK,
159 &ccm->cgr0);
160
161 writel(readl(&ccm->cgr1) |
162 MXC_CCM_CGR1_FEC_MASK |
163 MXC_CCM_CGR1_GPIO1_MASK |
164 MXC_CCM_CGR1_GPIO2_MASK |
165 MXC_CCM_CGR1_GPIO3_MASK |
166 MXC_CCM_CGR1_I2C1_MASK |
167 MXC_CCM_CGR1_I2C2_MASK |
168 MXC_CCM_CGR1_I2C3_MASK,
169 &ccm->cgr1);
170
171 /* Set-up NAND */
172 __raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
173
174 /* Set pinmux for the required peripherals */
175 setup_iomux_uart3();
176 setup_iomux_i2c();
177 setup_iomux_fec();
178 setup_iomux_spi();
179
180 return 0;
181}
182
183int board_init(void)
184{
185 /* address of boot parameters */
186 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
187
Stefano Babic322ac5f2016-10-17 15:51:34 +0200188 /* Enable power for ethernet */
189 gpio_direction_output(63, 0);
190
191 udelay(2000);
192
Stefano Babicdeb53482011-10-23 23:58:20 +0000193 return 0;
194}
195
196u32 get_board_rev(void)
197{
198 int rev = 0;
199
200 return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
201}
Heiko Schocher72c10152016-10-17 15:51:32 +0200202
203/*
204 * called prior to booting kernel or by 'fdt boardsetup' command
205 *
206 */
207int ft_board_setup(void *blob, bd_t *bd)
208{
Masahiro Yamadab35fb6a2018-07-19 16:28:23 +0900209 static const struct node_info nodes[] = {
Heiko Schocher72c10152016-10-17 15:51:32 +0200210 { "physmap-flash.0", MTD_DEV_TYPE_NOR, }, /* NOR flash */
211 { "mxc_nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
212 };
213
Simon Glass00caae62017-08-03 12:22:12 -0600214 if (env_get("fdt_noauto")) {
Heiko Schocher72c10152016-10-17 15:51:32 +0200215 puts(" Skiping ft_board_setup (fdt_noauto defined)\n");
216 return 0;
217 }
218
219 fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
220
221 return 0;
222}