blob: 0c43b2b0c7ce891b4eb49dee6c0940778b0790a4 [file] [log] [blame]
Haiying Wang765547d2009-03-27 17:02:45 -04001/*
Kumar Gala4c2e3da2009-07-28 21:49:52 -05002 * Copyright (C) 2009 Freescale Semiconductor, Inc.
Haiying Wang765547d2009-03-27 17:02:45 -04003 *
4 * See file CREDITS for list of people who contributed to this
5 * project.
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20 * MA 02111-1307 USA
21 */
22
23/*
24 * mpc8569mds board configuration file
25 */
26#ifndef __CONFIG_H
27#define __CONFIG_H
28
29/* High Level Configuration Options */
30#define CONFIG_BOOKE 1 /* BOOKE */
31#define CONFIG_E500 1 /* BOOKE e500 family */
32#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */
33#define CONFIG_MPC8569 1 /* MPC8569 specific */
34#define CONFIG_MPC8569MDS 1 /* MPC8569MDS board specific */
35
36#define CONFIG_FSL_ELBC 1 /* Has Enhance localbus controller */
37
38#define CONFIG_PCI 1 /* Disable PCI/PCIE */
39#define CONFIG_PCIE1 1 /* PCIE controller */
40#define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */
41#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
42#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
43#define CONFIG_QE /* Enable QE */
44#define CONFIG_ENV_OVERWRITE
45#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
46
Haiying Wang765547d2009-03-27 17:02:45 -040047#ifndef __ASSEMBLY__
48extern unsigned long get_clock_freq(void);
49#endif
50/* Replace a call to get_clock_freq (after it is implemented)*/
Dave Liu67351042009-05-18 17:49:23 +080051#define CONFIG_SYS_CLK_FREQ 66666666
52#define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ
Haiying Wang765547d2009-03-27 17:02:45 -040053
Liu Yuc95d5412009-11-27 15:31:52 +080054#ifdef CONFIG_MK_ATM
55#define CONFIG_PQ_MDS_PIB
56#define CONFIG_PQ_MDS_PIB_ATM
57#endif
58
Haiying Wang765547d2009-03-27 17:02:45 -040059/*
60 * These can be toggled for performance analysis, otherwise use default.
61 */
62#define CONFIG_L2_CACHE /* toggle L2 cache */
63#define CONFIG_BTB /* toggle branch predition */
64
Liu Yu674ef7b2010-01-18 19:03:28 +080065#ifdef CONFIG_MK_NAND
66#define CONFIG_NAND_U_BOOT 1
67#define CONFIG_RAMBOOT_NAND 1
68#define CONFIG_RAMBOOT_TEXT_BASE 0xf8f82000
69#endif
70
Haiying Wang765547d2009-03-27 17:02:45 -040071/*
72 * Only possible on E500 Version 2 or newer cores.
73 */
74#define CONFIG_ENABLE_36BIT_PHYS 1
75
76#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
Anton Vorontsov7f52ed52009-10-15 17:47:06 +040077#define CONFIG_HWCONFIG
Haiying Wang765547d2009-03-27 17:02:45 -040078
79#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
80#define CONFIG_SYS_MEMTEST_END 0x00400000
81
82/*
Liu Yu674ef7b2010-01-18 19:03:28 +080083 * Config the L2 Cache as L2 SRAM
84 */
85#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
86#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
87#define CONFIG_SYS_L2_SIZE (512 << 10)
88#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
89
90/*
Haiying Wang765547d2009-03-27 17:02:45 -040091 * Base addresses -- Note these are effective addresses where the
92 * actual resources get mapped (not physical addresses)
93 */
Haiying Wang765547d2009-03-27 17:02:45 -040094#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
95#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR
96 /* physical addr of CCSRBAR */
97#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR
98 /* PQII uses CONFIG_SYS_IMMR */
99
Liu Yu674ef7b2010-01-18 19:03:28 +0800100#if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
101#define CONFIG_SYS_CCSRBAR_DEFAULT CONFIG_SYS_CCSRBAR
102#else
103#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
104#endif
105
Haiying Wang765547d2009-03-27 17:02:45 -0400106#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
107#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
108
109/* DDR Setup */
110#define CONFIG_FSL_DDR3
111#undef CONFIG_FSL_DDR_INTERACTIVE
112#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
113#define CONFIG_DDR_SPD
114#define CONFIG_DDR_DLL /* possible DLL fix needed */
115#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
116
117#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
118
119#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
120 /* DDR is system memory*/
121#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
122
123#define CONFIG_NUM_DDR_CONTROLLERS 1
124#define CONFIG_DIMM_SLOTS_PER_CTLR 1
125#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
126
127/* I2C addresses of SPD EEPROMs */
128#define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */
129#define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 1 DIMM 0 */
130
131/* These are used when DDR doesn't use SPD. */
132#define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1024MB */
133#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F
134#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202
135#define CONFIG_SYS_DDR_TIMING_3 0x00020000
136#define CONFIG_SYS_DDR_TIMING_0 0x00330004
137#define CONFIG_SYS_DDR_TIMING_1 0x6F6B4644
138#define CONFIG_SYS_DDR_TIMING_2 0x002888D0
139#define CONFIG_SYS_DDR_SDRAM_CFG 0x47000000
140#define CONFIG_SYS_DDR_SDRAM_CFG_2 0x04401040
141#define CONFIG_SYS_DDR_SDRAM_MODE 0x40401521
142#define CONFIG_SYS_DDR_SDRAM_MODE_2 0x8000C000
143#define CONFIG_SYS_DDR_SDRAM_INTERVAL 0x03E00000
144#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
145#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL 0x01000000
146#define CONFIG_SYS_DDR_TIMING_4 0x00220001
147#define CONFIG_SYS_DDR_TIMING_5 0x03402400
148#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600
149#define CONFIG_SYS_DDR_WRLVL_CNTL 0x0655A604
150#define CONFIG_SYS_DDR_CDR_1 0x80040000
151#define CONFIG_SYS_DDR_CDR_2 0x00000000
152#define CONFIG_SYS_DDR_OCD_CTRL 0x00000000
153#define CONFIG_SYS_DDR_OCD_STATUS 0x00000000
154#define CONFIG_SYS_DDR_CONTROL 0xc7000000 /* Type = DDR3 */
155#define CONFIG_SYS_DDR_CONTROL2 0x24400000
156
157#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d
158#define CONFIG_SYS_DDR_ERR_DIS 0x00000000
159#define CONFIG_SYS_DDR_SBE 0x00010000
160
161#undef CONFIG_CLOCKS_IN_MHZ
162
163/*
164 * Local Bus Definitions
165 */
166
167#define CONFIG_SYS_FLASH_BASE 0xfe000000 /* start of FLASH 32M */
168#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
169
170#define CONFIG_SYS_BCSR_BASE 0xf8000000
171#define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE
172
173/*Chip select 0 - Flash*/
Liu Yu674ef7b2010-01-18 19:03:28 +0800174#define CONFIG_FLASH_BR_PRELIM 0xfe000801
175#define CONFIG_FLASH_OR_PRELIM 0xfe000ff7
Haiying Wang765547d2009-03-27 17:02:45 -0400176
Haiying Wang399b53c2009-05-20 12:30:32 -0400177/*Chip select 1 - BCSR*/
Haiying Wang765547d2009-03-27 17:02:45 -0400178#define CONFIG_SYS_BR1_PRELIM 0xf8000801
179#define CONFIG_SYS_OR1_PRELIM 0xffffe9f7
180
Haiying Wang399b53c2009-05-20 12:30:32 -0400181/*Chip select 4 - PIB*/
182#define CONFIG_SYS_BR4_PRELIM 0xf8008801
183#define CONFIG_SYS_OR4_PRELIM 0xffffe9f7
184
185/*Chip select 5 - PIB*/
186#define CONFIG_SYS_BR5_PRELIM 0xf8010801
187#define CONFIG_SYS_OR5_PRELIM 0xffffe9f7
188
Haiying Wang765547d2009-03-27 17:02:45 -0400189#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
190#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
191#undef CONFIG_SYS_FLASH_CHECKSUM
192#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
193#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
194
195#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
196
Liu Yu674ef7b2010-01-18 19:03:28 +0800197#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND)
198#define CONFIG_SYS_RAMBOOT
199#else
200#undef CONFIG_SYS_RAMBOOT
201#endif
202
Haiying Wang765547d2009-03-27 17:02:45 -0400203#define CONFIG_FLASH_CFI_DRIVER
204#define CONFIG_SYS_FLASH_CFI
205#define CONFIG_SYS_FLASH_EMPTY_INFO
206
Anton Vorontsova29155e2009-10-15 17:47:08 +0400207/* Chip select 3 - NAND */
Liu Yu674ef7b2010-01-18 19:03:28 +0800208#ifndef CONFIG_NAND_SPL
Anton Vorontsova29155e2009-10-15 17:47:08 +0400209#define CONFIG_SYS_NAND_BASE 0xFC000000
Liu Yu674ef7b2010-01-18 19:03:28 +0800210#else
211#define CONFIG_SYS_NAND_BASE 0xFFF00000
212#endif
213
214/* NAND boot: 4K NAND loader config */
215#define CONFIG_SYS_NAND_SPL_SIZE 0x1000
216#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000)
217#define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR)
218#define CONFIG_SYS_NAND_U_BOOT_START \
219 (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
220#define CONFIG_SYS_NAND_U_BOOT_OFFS (0)
221#define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000)
222#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
223
Anton Vorontsova29155e2009-10-15 17:47:08 +0400224#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
225#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, }
226#define CONFIG_SYS_MAX_NAND_DEVICE 1
227#define CONFIG_MTD_NAND_VERIFY_WRITE 1
228#define CONFIG_CMD_NAND 1
229#define CONFIG_NAND_FSL_ELBC 1
230#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
231#define CONFIG_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE_PHYS \
232 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
233 | BR_PS_8 /* Port Size = 8 bit */ \
234 | BR_MS_FCM /* MSEL = FCM */ \
235 | BR_V) /* valid */
236#define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \
237 | OR_FCM_CSCT \
238 | OR_FCM_CST \
239 | OR_FCM_CHT \
240 | OR_FCM_SCY_1 \
241 | OR_FCM_TRLX \
242 | OR_FCM_EHTR)
Liu Yu674ef7b2010-01-18 19:03:28 +0800243
244#ifdef CONFIG_RAMBOOT_NAND
245#define CONFIG_SYS_BR0_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */
246#define CONFIG_SYS_OR0_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
247#define CONFIG_SYS_BR3_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
248#define CONFIG_SYS_OR3_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
249#else
250#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
251#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
Anton Vorontsova29155e2009-10-15 17:47:08 +0400252#define CONFIG_SYS_BR3_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */
253#define CONFIG_SYS_OR3_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */
Liu Yu674ef7b2010-01-18 19:03:28 +0800254#endif
Haiying Wang765547d2009-03-27 17:02:45 -0400255
256/*
257 * SDRAM on the LocalBus
258 */
259#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
260#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
261
262#define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */
263#define CONFIG_SYS_LBC_LBCR 0x00040000 /* LB config reg */
264#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
265#define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
266
267#define CONFIG_SYS_INIT_RAM_LOCK 1
268#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
269#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */
270
271#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
272#define CONFIG_SYS_GBL_DATA_OFFSET \
273 (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
274#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
275
276#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
Haiying Wangfb279492009-06-04 16:12:39 -0400277#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
Haiying Wang765547d2009-03-27 17:02:45 -0400278
279/* Serial Port */
280#define CONFIG_CONS_INDEX 1
Anton Vorontsov7f52ed52009-10-15 17:47:06 +0400281#define CONFIG_SERIAL_MULTI 1
Haiying Wang765547d2009-03-27 17:02:45 -0400282#undef CONFIG_SERIAL_SOFTWARE_FIFO
283#define CONFIG_SYS_NS16550
284#define CONFIG_SYS_NS16550_SERIAL
285#define CONFIG_SYS_NS16550_REG_SIZE 1
286#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
Kumar Gala93341902010-04-07 01:34:11 -0500287#ifdef CONFIG_NAND_SPL
288#define CONFIG_NS16550_MIN_FUNCTIONS
289#endif
Haiying Wang765547d2009-03-27 17:02:45 -0400290
291#define CONFIG_SYS_BAUDRATE_TABLE \
292 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
293
294#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
295#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
296
297/* Use the HUSH parser*/
298#define CONFIG_SYS_HUSH_PARSER
299#ifdef CONFIG_SYS_HUSH_PARSER
300#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
301#endif
302
303/* pass open firmware flat tree */
304#define CONFIG_OF_LIBFDT 1
305#define CONFIG_OF_BOARD_SETUP 1
306#define CONFIG_OF_STDOUT_VIA_ALIAS 1
307
Haiying Wang765547d2009-03-27 17:02:45 -0400308/*
309 * I2C
310 */
311#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
312#define CONFIG_HARD_I2C /* I2C with hardware support*/
313#undef CONFIG_SOFT_I2C /* I2C bit-banged */
314#define CONFIG_I2C_MULTI_BUS
Haiying Wang765547d2009-03-27 17:02:45 -0400315#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
316#define CONFIG_SYS_I2C_SLAVE 0x7F
317#define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
318#define CONFIG_SYS_I2C_OFFSET 0x3000
319#define CONFIG_SYS_I2C2_OFFSET 0x3100
320
321/*
322 * I2C2 EEPROM
323 */
324#define CONFIG_ID_EEPROM
325#ifdef CONFIG_ID_EEPROM
326#define CONFIG_SYS_I2C_EEPROM_NXID
327#endif
328#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
329#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
330#define CONFIG_SYS_EEPROM_BUS_NUM 1
331
332#define PLPPAR1_I2C_BIT_MASK 0x0000000F
333#define PLPPAR1_I2C2_VAL 0x00000000
Anton Vorontsov7f52ed52009-10-15 17:47:06 +0400334#define PLPPAR1_ESDHC_VAL 0x0000000A
Haiying Wang765547d2009-03-27 17:02:45 -0400335#define PLPDIR1_I2C_BIT_MASK 0x0000000F
336#define PLPDIR1_I2C2_VAL 0x0000000F
Anton Vorontsov7f52ed52009-10-15 17:47:06 +0400337#define PLPDIR1_ESDHC_VAL 0x00000006
Anton Vorontsovc4ca10f2009-12-16 01:14:31 +0300338#define PLPPAR1_UART0_BIT_MASK 0x00000fc0
339#define PLPPAR1_ESDHC_4BITS_VAL 0x00000a80
340#define PLPDIR1_UART0_BIT_MASK 0x00000fc0
341#define PLPDIR1_ESDHC_4BITS_VAL 0x00000a80
Haiying Wang765547d2009-03-27 17:02:45 -0400342
343/*
344 * General PCI
345 * Memory Addresses are mapped 1-1. I/O is mapped from 0
346 */
347#define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000
348#define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000
349#define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000
350#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
351#define CONFIG_SYS_PCIE1_IO_VIRT 0xe2800000
352#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
353#define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000
354#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */
355
356#define CONFIG_SYS_SRIO_MEM_VIRT 0xc0000000
357#define CONFIG_SYS_SRIO_MEM_BUS 0xc0000000
358#define CONFIG_SYS_SRIO_MEM_PHYS 0xc0000000
359
360#ifdef CONFIG_QE
361/*
362 * QE UEC ethernet configuration
363 */
Haiying Wangf82107f2009-05-20 12:30:37 -0400364#define CONFIG_SYS_UCC_RGMII_MODE /* Set UCC work at RGMII by default */
365#undef CONFIG_SYS_UCC_RMII_MODE /* Set UCC work at RMII mode */
Haiying Wang765547d2009-03-27 17:02:45 -0400366
367#define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120)
368#define CONFIG_UEC_ETH
369#define CONFIG_ETHPRIME "FSL UEC0"
370#define CONFIG_PHY_MODE_NEED_CHANGE
371
372#define CONFIG_UEC_ETH1 /* GETH1 */
373#define CONFIG_HAS_ETH0
374
375#ifdef CONFIG_UEC_ETH1
376#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
377#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE
Haiying Wangf82107f2009-05-20 12:30:37 -0400378#if defined(CONFIG_SYS_UCC_RGMII_MODE)
Haiying Wang765547d2009-03-27 17:02:45 -0400379#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12
380#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
381#define CONFIG_SYS_UEC1_PHY_ADDR 7
Heiko Schocher582c55a2010-01-20 09:04:28 +0100382#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
383#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
Haiying Wangf82107f2009-05-20 12:30:37 -0400384#elif defined(CONFIG_SYS_UCC_RMII_MODE)
385#define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 /* CLK16 for RMII */
386#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
387#define CONFIG_SYS_UEC1_PHY_ADDR 8 /* 0x8 for RMII */
Heiko Schocher582c55a2010-01-20 09:04:28 +0100388#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
389#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
Haiying Wangf82107f2009-05-20 12:30:37 -0400390#endif /* CONFIG_SYS_UCC_RGMII_MODE */
391#endif /* CONFIG_UEC_ETH1 */
Haiying Wang765547d2009-03-27 17:02:45 -0400392
393#define CONFIG_UEC_ETH2 /* GETH2 */
394#define CONFIG_HAS_ETH1
395
396#ifdef CONFIG_UEC_ETH2
397#define CONFIG_SYS_UEC2_UCC_NUM 1 /* UCC2 */
398#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE
Haiying Wangf82107f2009-05-20 12:30:37 -0400399#if defined(CONFIG_SYS_UCC_RGMII_MODE)
Haiying Wang765547d2009-03-27 17:02:45 -0400400#define CONFIG_SYS_UEC2_TX_CLK QE_CLK17
401#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
402#define CONFIG_SYS_UEC2_PHY_ADDR 1
Heiko Schocher582c55a2010-01-20 09:04:28 +0100403#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
404#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
Haiying Wangf82107f2009-05-20 12:30:37 -0400405#elif defined(CONFIG_SYS_UCC_RMII_MODE)
406#define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 /* CLK 16 for RMII */
407#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
408#define CONFIG_SYS_UEC2_PHY_ADDR 0x9 /* 0x9 for RMII */
Heiko Schocher582c55a2010-01-20 09:04:28 +0100409#define CONFIG_SYS_UEC2_INTERFACE_TYPE RMII
410#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
Haiying Wangf82107f2009-05-20 12:30:37 -0400411#endif /* CONFIG_SYS_UCC_RGMII_MODE */
412#endif /* CONFIG_UEC_ETH2 */
Haiying Wang765547d2009-03-27 17:02:45 -0400413
Haiying Wang750098d2009-05-20 12:30:36 -0400414#define CONFIG_UEC_ETH3 /* GETH3 */
415#define CONFIG_HAS_ETH2
416
417#ifdef CONFIG_UEC_ETH3
418#define CONFIG_SYS_UEC3_UCC_NUM 2 /* UCC3 */
419#define CONFIG_SYS_UEC3_RX_CLK QE_CLK_NONE
Haiying Wangf82107f2009-05-20 12:30:37 -0400420#if defined(CONFIG_SYS_UCC_RGMII_MODE)
Haiying Wang750098d2009-05-20 12:30:36 -0400421#define CONFIG_SYS_UEC3_TX_CLK QE_CLK12
422#define CONFIG_SYS_UEC3_ETH_TYPE GIGA_ETH
423#define CONFIG_SYS_UEC3_PHY_ADDR 2
Heiko Schocher582c55a2010-01-20 09:04:28 +0100424#define CONFIG_SYS_UEC3_INTERFACE_TYPE RGMII_ID
425#define CONFIG_SYS_UEC3_INTERFACE_SPEED 1000
Haiying Wangf82107f2009-05-20 12:30:37 -0400426#elif defined(CONFIG_SYS_UCC_RMII_MODE)
427#define CONFIG_SYS_UEC3_TX_CLK QE_CLK16 /* CLK_16 for RMII */
428#define CONFIG_SYS_UEC3_ETH_TYPE FAST_ETH
429#define CONFIG_SYS_UEC3_PHY_ADDR 0xA /* 0xA for RMII */
Heiko Schocher582c55a2010-01-20 09:04:28 +0100430#define CONFIG_SYS_UEC3_INTERFACE_TYPE RMII
431#define CONFIG_SYS_UEC3_INTERFACE_SPEED 100
Haiying Wangf82107f2009-05-20 12:30:37 -0400432#endif /* CONFIG_SYS_UCC_RGMII_MODE */
433#endif /* CONFIG_UEC_ETH3 */
Haiying Wang750098d2009-05-20 12:30:36 -0400434
435#define CONFIG_UEC_ETH4 /* GETH4 */
436#define CONFIG_HAS_ETH3
437
438#ifdef CONFIG_UEC_ETH4
439#define CONFIG_SYS_UEC4_UCC_NUM 3 /* UCC4 */
440#define CONFIG_SYS_UEC4_RX_CLK QE_CLK_NONE
Haiying Wangf82107f2009-05-20 12:30:37 -0400441#if defined(CONFIG_SYS_UCC_RGMII_MODE)
Haiying Wang750098d2009-05-20 12:30:36 -0400442#define CONFIG_SYS_UEC4_TX_CLK QE_CLK17
443#define CONFIG_SYS_UEC4_ETH_TYPE GIGA_ETH
444#define CONFIG_SYS_UEC4_PHY_ADDR 3
Heiko Schocher582c55a2010-01-20 09:04:28 +0100445#define CONFIG_SYS_UEC4_INTERFACE_TYPE RGMII_ID
446#define CONFIG_SYS_UEC4_INTERFACE_SPEED 1000
Haiying Wangf82107f2009-05-20 12:30:37 -0400447#elif defined(CONFIG_SYS_UCC_RMII_MODE)
448#define CONFIG_SYS_UEC4_TX_CLK QE_CLK16 /* CLK16 for RMII */
449#define CONFIG_SYS_UEC4_ETH_TYPE FAST_ETH
450#define CONFIG_SYS_UEC4_PHY_ADDR 0xB /* 0xB for RMII */
Heiko Schocher582c55a2010-01-20 09:04:28 +0100451#define CONFIG_SYS_UEC4_INTERFACE_TYPE RMII
452#define CONFIG_SYS_UEC4_INTERFACE_SPEED 100
Haiying Wangf82107f2009-05-20 12:30:37 -0400453#endif /* CONFIG_SYS_UCC_RGMII_MODE */
454#endif /* CONFIG_UEC_ETH4 */
Haiying Wang3bd8e532009-05-20 12:30:41 -0400455
456#undef CONFIG_UEC_ETH6 /* GETH6 */
457#define CONFIG_HAS_ETH5
458
459#ifdef CONFIG_UEC_ETH6
460#define CONFIG_SYS_UEC6_UCC_NUM 5 /* UCC6 */
461#define CONFIG_SYS_UEC6_RX_CLK QE_CLK_NONE
462#define CONFIG_SYS_UEC6_TX_CLK QE_CLK_NONE
463#define CONFIG_SYS_UEC6_ETH_TYPE GIGA_ETH
464#define CONFIG_SYS_UEC6_PHY_ADDR 4
Heiko Schocher582c55a2010-01-20 09:04:28 +0100465#define CONFIG_SYS_UEC6_INTERFACE_TYPE SGMII
466#define CONFIG_SYS_UEC6_INTERFACE_SPEED 1000
Haiying Wang3bd8e532009-05-20 12:30:41 -0400467#endif /* CONFIG_UEC_ETH6 */
468
469#undef CONFIG_UEC_ETH8 /* GETH8 */
470#define CONFIG_HAS_ETH7
471
472#ifdef CONFIG_UEC_ETH8
473#define CONFIG_SYS_UEC8_UCC_NUM 7 /* UCC8 */
474#define CONFIG_SYS_UEC8_RX_CLK QE_CLK_NONE
475#define CONFIG_SYS_UEC8_TX_CLK QE_CLK_NONE
476#define CONFIG_SYS_UEC8_ETH_TYPE GIGA_ETH
477#define CONFIG_SYS_UEC8_PHY_ADDR 6
Heiko Schocher582c55a2010-01-20 09:04:28 +0100478#define CONFIG_SYS_UEC8_INTERFACE_TYPE SGMII
479#define CONFIG_SYS_UEC8_INTERFACE_SPEED 1000
Haiying Wang3bd8e532009-05-20 12:30:41 -0400480#endif /* CONFIG_UEC_ETH8 */
481
Haiying Wang765547d2009-03-27 17:02:45 -0400482#endif /* CONFIG_QE */
483
484#if defined(CONFIG_PCI)
485
486#define CONFIG_NET_MULTI
487#define CONFIG_PCI_PNP /* do pci plug-and-play */
488
489#undef CONFIG_EEPRO100
490#undef CONFIG_TULIP
491
492#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
493
494#endif /* CONFIG_PCI */
495
496#ifndef CONFIG_NET_MULTI
497#define CONFIG_NET_MULTI 1
498#endif
499
500/*
501 * Environment
502 */
Liu Yu674ef7b2010-01-18 19:03:28 +0800503#if defined(CONFIG_SYS_RAMBOOT)
504#if defined(CONFIG_RAMBOOT_NAND)
505#define CONFIG_ENV_IS_IN_NAND 1
506#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
507#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
508#endif
509#else
Haiying Wang765547d2009-03-27 17:02:45 -0400510#define CONFIG_ENV_IS_IN_FLASH 1
Haiying Wangfb279492009-06-04 16:12:39 -0400511#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
Haiying Wang765547d2009-03-27 17:02:45 -0400512#define CONFIG_ENV_SECT_SIZE 0x20000 /* 256K(one sector) for env */
Haiying Wangfb279492009-06-04 16:12:39 -0400513#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
Liu Yu674ef7b2010-01-18 19:03:28 +0800514#endif
Haiying Wang765547d2009-03-27 17:02:45 -0400515
516#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
517#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
518
519/* QE microcode/firmware address */
520#define CONFIG_SYS_QE_FW_ADDR 0xfff00000
521
522/*
523 * BOOTP options
524 */
525#define CONFIG_BOOTP_BOOTFILESIZE
526#define CONFIG_BOOTP_BOOTPATH
527#define CONFIG_BOOTP_GATEWAY
528#define CONFIG_BOOTP_HOSTNAME
529
530
531/*
532 * Command line configuration.
533 */
534#include <config_cmd_default.h>
535
536#define CONFIG_CMD_PING
537#define CONFIG_CMD_I2C
538#define CONFIG_CMD_MII
539#define CONFIG_CMD_ELF
540#define CONFIG_CMD_IRQ
541#define CONFIG_CMD_SETEXPR
542
543#if defined(CONFIG_PCI)
544 #define CONFIG_CMD_PCI
545#endif
546
547
548#undef CONFIG_WATCHDOG /* watchdog disabled */
549
Anton Vorontsov7f52ed52009-10-15 17:47:06 +0400550#define CONFIG_MMC 1
551
552#ifdef CONFIG_MMC
553#define CONFIG_FSL_ESDHC
554#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
555#define CONFIG_CMD_MMC
556#define CONFIG_GENERIC_MMC
557#define CONFIG_CMD_EXT2
558#define CONFIG_CMD_FAT
559#define CONFIG_DOS_PARTITION
560#endif
561
Haiying Wang765547d2009-03-27 17:02:45 -0400562/*
563 * Miscellaneous configurable options
564 */
565#define CONFIG_SYS_LONGHELP /* undef to save memory */
566#define CONFIG_CMDLINE_EDITING /* Command-line editing */
567#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
568#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
569#if defined(CONFIG_CMD_KGDB)
570#define CONFIG_SYS_CBSIZE 2048 /* Console I/O Buffer Size */
571#else
572#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
573#endif
574#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
575 /* Print Buffer Size */
576#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
577#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
578 /* Boot Argument Buffer Size */
579#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
580
581/*
582 * For booting Linux, the board info and command line data
Kumar Gala89188a62009-07-15 08:54:50 -0500583 * have to be in the first 16 MB of memory, since this is
Haiying Wang765547d2009-03-27 17:02:45 -0400584 * the maximum mapped by the Linux kernel during initialization.
585 */
Kumar Gala89188a62009-07-15 08:54:50 -0500586#define CONFIG_SYS_BOOTMAPSZ (16 << 20)
Haiying Wang765547d2009-03-27 17:02:45 -0400587 /* Initial Memory map for Linux*/
588
589/*
590 * Internal Definitions
591 *
592 * Boot Flags
593 */
594#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
595#define BOOTFLAG_WARM 0x02 /* Software reboot */
596
597#if defined(CONFIG_CMD_KGDB)
598#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
599#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
600#endif
601
602/*
603 * Environment Configuration
604 */
605#define CONFIG_HOSTNAME mpc8569mds
606#define CONFIG_ROOTPATH /nfsroot
607#define CONFIG_BOOTFILE your.uImage
608
609#define CONFIG_SERVERIP 192.168.1.1
610#define CONFIG_GATEWAYIP 192.168.1.1
611#define CONFIG_NETMASK 255.255.255.0
612
613#define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/
614
615#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
616#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
617
618#define CONFIG_BAUDRATE 115200
619
620#define CONFIG_EXTRA_ENV_SETTINGS \
621 "netdev=eth0\0" \
622 "consoledev=ttyS0\0" \
623 "ramdiskaddr=600000\0" \
624 "ramdiskfile=your.ramdisk.u-boot\0" \
625 "fdtaddr=400000\0" \
626 "fdtfile=your.fdt.dtb\0" \
627 "nfsargs=setenv bootargs root=/dev/nfs rw " \
628 "nfsroot=$serverip:$rootpath " \
629 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
630 "console=$consoledev,$baudrate $othbootargs\0" \
631 "ramargs=setenv bootargs root=/dev/ram rw " \
632 "console=$consoledev,$baudrate $othbootargs\0" \
633
634#define CONFIG_NFSBOOTCOMMAND \
635 "run nfsargs;" \
636 "tftp $loadaddr $bootfile;" \
637 "tftp $fdtaddr $fdtfile;" \
638 "bootm $loadaddr - $fdtaddr"
639
640#define CONFIG_RAMBOOTCOMMAND \
641 "run ramargs;" \
642 "tftp $ramdiskaddr $ramdiskfile;" \
643 "tftp $loadaddr $bootfile;" \
644 "bootm $loadaddr $ramdiskaddr"
645
646#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
647
648#endif /* __CONFIG_H */