blob: 0749037163b873dc35e40d9bd66aef06faee2e8a [file] [log] [blame]
Stefan Roese1eac2a72006-11-29 15:42:37 +01001/*
2 * (C) Copyright 2006
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * Based on original work by
6 * Roel Loeffen, (C) Copyright 2006 Prodrive B.V.
7 *
8 * See file CREDITS for list of people who contributed to this
9 * project.
10 *
11 * This program is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of
14 * the License, or (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
24 * MA 02111-1307 USA
25 */
26
27/************************************************************************
28 * p3mx.h - configuration for Prodrive P3M750 & P3M7448 boards
29 *
30 * The defines:
31 * CONFIG_P3M750 or
32 * CONFIG_P3M7448
33 * are written into include/config.h by the "make xxx_config" command
34 ***********************************************************************/
35#ifndef __CONFIG_H
36#define __CONFIG_H
37
38/*-----------------------------------------------------------------------
39 * High Level Configuration Options
40 *----------------------------------------------------------------------*/
41#define CONFIG_P3Mx /* used for both board versions */
42
43#if defined (CONFIG_P3M750)
44#define CONFIG_750FX /* 750GL/GX/FX */
Becky Bruce31d82672008-05-08 19:02:12 -050045#define CONFIG_HIGH_BATS /* High BATs supported */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020046#define CONFIG_SYS_BOARD_NAME "P3M750"
47#define CONFIG_SYS_BUS_HZ 100000000
48#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ
49#define CONFIG_SYS_TCLK 100000000
Stefan Roese1eac2a72006-11-29 15:42:37 +010050#elif defined (CONFIG_P3M7448)
51#define CONFIG_74xx
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020052#define CONFIG_SYS_BOARD_NAME "P3M7448"
53#define CONFIG_SYS_BUS_HZ 133333333
54#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ
55#define CONFIG_SYS_TCLK 133333333
Stefan Roese1eac2a72006-11-29 15:42:37 +010056#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020057#define CONFIG_SYS_GT_DUAL_CPU /* also for JTAG even with one cpu */
Stefan Roese1eac2a72006-11-29 15:42:37 +010058
59/* which initialization functions to call for this board */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020060#define CONFIG_SYS_BOARD_ASM_INIT 1
Stefan Roese1eac2a72006-11-29 15:42:37 +010061#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
Stefan Roese1eac2a72006-11-29 15:42:37 +010062#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */
Stefan Roese1eac2a72006-11-29 15:42:37 +010063
64/*-----------------------------------------------------------------------
65 * Base addresses -- Note these are effective addresses where the
66 * actual resources get mapped (not physical addresses)
67 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020068#define CONFIG_SYS_SDRAM_BASE 0x00000000
Stefan Roese1eac2a72006-11-29 15:42:37 +010069#ifdef CONFIG_P3M750
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020070#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */
Stefan Roese1eac2a72006-11-29 15:42:37 +010071#endif
72
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020073#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
Stefan Roese1eac2a72006-11-29 15:42:37 +010074#if defined (CONFIG_P3M750)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020075#define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of flash banks */
76#define CONFIG_SYS_BOOT_SIZE _8M /* boot flash */
Stefan Roese1eac2a72006-11-29 15:42:37 +010077#elif defined (CONFIG_P3M7448)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020078#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of flash banks */
79#define CONFIG_SYS_BOOT_SIZE _16M /* boot flash */
Stefan Roese1eac2a72006-11-29 15:42:37 +010080#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020081#define CONFIG_SYS_BOOT_SPACE CONFIG_SYS_FLASH_BASE /* BOOT_CS0 flash 0 */
82#define CONFIG_SYS_MONITOR_BASE 0xfff00000
83#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
84#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
85#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000
Stefan Roese1eac2a72006-11-29 15:42:37 +010086
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020087#define CONFIG_SYS_DFL_GT_REGS 0xf1000000 /* boot time GT_REGS */
88#define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers are mapped here */
89#define CONFIG_SYS_INT_SRAM_BASE 0x42000000 /* GT offers 256k internal SRAM */
Stefan Roese1eac2a72006-11-29 15:42:37 +010090
91/*-----------------------------------------------------------------------
92 * Initial RAM & stack pointer (placed in internal SRAM)
93 *----------------------------------------------------------------------*/
94 /*
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020095 * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
Stefan Roese1eac2a72006-11-29 15:42:37 +010096 * To an unused memory region. The stack will remain in cache until RAM
97 * is initialized
98*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020099#undef CONFIG_SYS_INIT_RAM_LOCK
100#define CONFIG_SYS_INIT_RAM_ADDR 0x42000000
101#define CONFIG_SYS_INIT_RAM_END 0x1000
102#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */
103#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
Stefan Roese1eac2a72006-11-29 15:42:37 +0100104
105
106/*-----------------------------------------------------------------------
107 * Serial Port
108 *----------------------------------------------------------------------*/
109#define CONFIG_MPSC /* MV64460 Serial */
110#define CONFIG_MPSC_PORT 0
111#define CONFIG_BAUDRATE 115200 /* console baudrate */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200112#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
Stefan Roese1eac2a72006-11-29 15:42:37 +0100113#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200114#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100115
116/*-----------------------------------------------------------------------
117 * Ethernet
118 *----------------------------------------------------------------------*/
119/* Change the default ethernet port, use this define (options: 0, 1, 2) */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200120#define CONFIG_SYS_ETH_PORT ETH_0
Stefan Roese1eac2a72006-11-29 15:42:37 +0100121#define CONFIG_NET_MULTI
122#define MV_ETH_DEVS 2
123#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
124#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
125
126/*-----------------------------------------------------------------------
127 * FLASH related
128 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200129#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200130#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200131#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
132#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
133#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
134#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
135#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
136#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protection */
137#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100138
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200139#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100140#if defined (CONFIG_P3M750)
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200141#define CONFIG_ENV_SECT_SIZE 0x20000 /* one sector (1 device) */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100142#elif defined (CONFIG_P3M7448)
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200143#define CONFIG_ENV_SECT_SIZE 0x40000 /* two sectors (2 devices parallel */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100144#endif
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200145#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200146#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
Stefan Roese1eac2a72006-11-29 15:42:37 +0100147
148/*-----------------------------------------------------------------------
149 * DDR SDRAM
150 *----------------------------------------------------------------------*/
151#define CONFIG_MV64460_ECC
152
153/*-----------------------------------------------------------------------
154 * I2C
155 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200156#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed default */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100157
158/* I2C RTC */
159#define CONFIG_RTC_M41T11 1
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200160#define CONFIG_SYS_I2C_RTC_ADDR 0x68
161#define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* play along with linux */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100162
163/*-----------------------------------------------------------------------
164 * PCI stuff
165 *----------------------------------------------------------------------*/
166#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
167#define PCI_HOST_FORCE 1 /* configure as pci host */
168#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
169
Stefan Roese0057d752007-01-18 11:54:52 +0100170#undef CONFIG_PCI /* include pci support */
171#ifdef CONFIG_PCI
Stefan Roese1eac2a72006-11-29 15:42:37 +0100172#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
173#define CONFIG_PCI_PNP /* do pci plug-and-play */
174#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */
Stefan Roese0057d752007-01-18 11:54:52 +0100175#endif /* CONFIG_PCI */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100176
177/* PCI MEMORY MAP section */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200178#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000
179#define CONFIG_SYS_PCI0_MEM_SIZE _128M
180#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000
181#define CONFIG_SYS_PCI1_MEM_SIZE _128M
Stefan Roese1eac2a72006-11-29 15:42:37 +0100182
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200183#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE)
184#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE)
Stefan Roese1eac2a72006-11-29 15:42:37 +0100185
186/* PCI I/O MAP section */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200187#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000
188#define CONFIG_SYS_PCI0_IO_SIZE _16M
189#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000
190#define CONFIG_SYS_PCI1_IO_SIZE _16M
Stefan Roese1eac2a72006-11-29 15:42:37 +0100191
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200192#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE)
193#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000
194#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE)
195#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000
Stefan Roese1eac2a72006-11-29 15:42:37 +0100196
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200197#define CONFIG_SYS_ISA_IO_BASE_ADDRESS (CONFIG_SYS_PCI0_IO_BASE)
198#define CONFIG_SYS_PCI_IDSEL 0x30
Stefan Roese1eac2a72006-11-29 15:42:37 +0100199
200#undef CONFIG_BOOTARGS
201#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
202 "netdev=eth0\0" \
203 "nfsargs=setenv bootargs root=/dev/nfs rw " \
204 "nfsroot=${serverip}:${rootpath}\0" \
205 "ramargs=setenv bootargs root=/dev/ram rw\0" \
206 "addip=setenv bootargs ${bootargs} " \
207 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
208 ":${hostname}:${netdev}:off panic=1\0" \
209 "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
210 "flash_nfs=run nfsargs addip addtty;" \
211 "bootm ${kernel_addr}\0" \
212 "flash_self=run ramargs addip addtty;" \
213 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
214 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
215 "bootm\0" \
216 "rootpath=/opt/eldk/ppc_6xx\0" \
217 "u-boot=p3mx/u-boot/u-boot.bin\0" \
218 "load=tftp 100000 ${u-boot}\0" \
219 "update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;" \
220 "cp.b 100000 fff00000 40000;" \
221 "setenv filesize;saveenv\0" \
Detlev Zundeld8ab58b2008-03-06 16:45:53 +0100222 "upd=run load update\0" \
Stefan Roese1eac2a72006-11-29 15:42:37 +0100223 "serverip=11.0.0.152\0"
224
225#if defined (CONFIG_P3M750)
226#define CONFIG_EXTRA_ENV_SETTINGS \
227 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
228 "hostname=p3m750\0" \
229 "bootfile=/tftpboot/p3mx/vxWorks.st\0" \
230 "kernel_addr=fc000000\0" \
231 "ramdisk_addr=fc180000\0" \
232 "vxfile=p3m750/vxWorks\0" \
233 "vxuser=ddg\0" \
234 "vxpass=ddg\0" \
235 "vxtarget=target\0" \
236 "vxflags=0x8\0" \
237 "vxargs=setenv bootargs mgi(0,0)host:${vxfile} h=${serverip} " \
238 "e=${ipaddr} u=${vxuser} pw=${vxpass} tn=${vxtarget} " \
239 "f=${vxflags}\0"
240#elif defined (CONFIG_P3M7448)
241#define CONFIG_EXTRA_ENV_SETTINGS \
242 CONFIG_EXTRA_ENV_SETTINGS_COMMON \
243 "hostname=p3m7448\0"
244#endif
245
246#if defined (CONFIG_P3M750)
247#define CONFIG_BOOTCOMMAND "tftp;run vxargs;bootvx"
248#elif defined (CONFIG_P3M7448)
249#define CONFIG_BOOTCOMMAND " "
250#endif
251
252#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
Jon Loeligerd3b8c1a2007-07-09 21:57:31 -0500253
254/*
255 * BOOTP options
256 */
257#define CONFIG_BOOTP_SUBNETMASK
258#define CONFIG_BOOTP_GATEWAY
259#define CONFIG_BOOTP_HOSTNAME
260#define CONFIG_BOOTP_BOOTPATH
261#define CONFIG_BOOTP_BOOTFILESIZE
Stefan Roese1eac2a72006-11-29 15:42:37 +0100262
Jon Loeliger26a34562007-07-04 22:33:17 -0500263/*
264 * Command line configuration.
265 */
266#include <config_cmd_default.h>
267
268#define CONFIG_CMD_ASKENV
269#define CONFIG_CMD_DATE
270#define CONFIG_CMD_DIAG
271#define CONFIG_CMD_ELF
272#define CONFIG_CMD_I2C
273#define CONFIG_CMD_IRQ
274#define CONFIG_CMD_MII
275#define CONFIG_CMD_NET
276#define CONFIG_CMD_NFS
277#define CONFIG_CMD_PING
278#define CONFIG_CMD_REGINFO
279#define CONFIG_CMD_PCI
280#define CONFIG_CMD_CACHE
281#define CONFIG_CMD_SDRAM
282
Stefan Roese1eac2a72006-11-29 15:42:37 +0100283
284/*-----------------------------------------------------------------------
285 * Miscellaneous configurable options
286 *----------------------------------------------------------------------*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200287#define CONFIG_SYS_HUSH_PARSER
288#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
Stefan Roese1eac2a72006-11-29 15:42:37 +0100289
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200290#define CONFIG_SYS_LONGHELP /* undef to save memory */
291#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
Jon Loeliger26a34562007-07-04 22:33:17 -0500292#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200293#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100294#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200295#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100296#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200297#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
298#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
299#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100300
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200301#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
302#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100303
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200304#define CONFIG_SYS_LOAD_ADDR 0x08000000 /* default load address */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100305
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200306#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100307
308#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
309#define CONFIG_LOOPW 1 /* enable loopw command */
310#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
311#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
312#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
313
314/*-----------------------------------------------------------------------
315 * Marvell MV64460 config settings
316 *----------------------------------------------------------------------*/
317/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected device width */
318#if defined (CONFIG_P3M750)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200319#define CONFIG_SYS_BOOT_PAR 0x8FDFF87F /* 16 bit flash, disable burst*/
Stefan Roese1eac2a72006-11-29 15:42:37 +0100320#elif defined (CONFIG_P3M7448)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200321#define CONFIG_SYS_BOOT_PAR 0x8FEFFFFF /* 32 bit flash, burst enabled */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100322#endif
323
324/*
325 * MPP[0] Serial Port 0 TxD TxD OUT Connected to P14 (buffered)
326 * MPP[1] Serial Port 0 RxD RxD IN Connected to P14 (buffered)
327 * MPP[2] NC
328 * MPP[3] Serial Port 1 TxD TxD OUT Connected to P14 (buffered)
329 * MPP[4] PCI Monarch# GPIO IN Connected to P12
330 * MPP[5] Serial Port 1 RxD RxD IN Connected to P14 (buffered)
331 * MPP[6] PMC Carrier Interrupt 0 Int IN Connected to P14
332 * MPP[7] PMC Carrier Interrupt 1 Int IN Connected to P14
333 * MPP[8] Reserved Do not use
334 * MPP[9] Reserved Do not use
335 * MPP[10] Reserved Do not use
336 * MPP[11] Reserved Do not use
337 * MPP[12] Phy 0 Interrupt Int IN
338 * MPP[13] Phy 1 Interrupt Int IN
339 * MPP[14] NC
340 * MPP[15] NC
341 * MPP[16] PCI Interrupt C Int IN Connected to P11
342 * MPP[17] PCI Interrupt D Int IN Connected to P11
343 * MPP[18] Watchdog NMI# GPIO IN Connected to MPP[24]
344 * MPP[19] Watchdog Expired# WDE OUT Connected to rst logic
345 * MPP[20] Watchdog Status WD_STS IN Read back of rst by watchdog
346 * MPP[21] NC
347 * MPP[22] GP LED Green GPIO OUT
348 * MPP[23] GP LED Red GPIO OUT
349 * MPP[24] Watchdog NMI# Int OUT
350 * MPP[25] NC
351 * MPP[26] NC
352 * MPP[27] PCI Interrupt A Int IN Connected to P11
353 * MPP[28] NC
354 * MPP[29] PCI Interrupt B Int IN Connected to P11
355 * MPP[30] Module reset GPIO OUT Board reset
356 * MPP[31] PCI EReady GPIO IN Connected to P12
357 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200358#define CONFIG_SYS_MPP_CONTROL_0 0x00303022
359#define CONFIG_SYS_MPP_CONTROL_1 0x00000000
360#define CONFIG_SYS_MPP_CONTROL_2 0x00004000
361#define CONFIG_SYS_MPP_CONTROL_3 0x00000004
362#define CONFIG_SYS_GPP_LEVEL_CONTROL 0x280730D0
Stefan Roese1eac2a72006-11-29 15:42:37 +0100363
364/*----------------------------------------------------------------------
365 * Initial BAT mappings
366 */
367
368/* NOTES:
369 * 1) GUARDED and WRITE_THRU not allowed in IBATS
370 * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
371 */
372/* SDRAM */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200373#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
374#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
375#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT)
376#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
Stefan Roese1eac2a72006-11-29 15:42:37 +0100377
378/* init ram */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200379#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
380#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
381#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
382#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
Stefan Roese1eac2a72006-11-29 15:42:37 +0100383
384/* PCI0, PCI1 in one BAT */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200385#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
386#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
387#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
388#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
Stefan Roese1eac2a72006-11-29 15:42:37 +0100389
390/* GT regs, bootrom, all the devices, PCI I/O */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200391#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
392#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
393#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
394#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
Stefan Roese1eac2a72006-11-29 15:42:37 +0100395
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200396#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
397#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
398#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
399#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
Stefan Roese1eac2a72006-11-29 15:42:37 +0100400
401/* set rest out of range for Linux !!!!!!!!!!! */
402
403/* IBAT5 and DBAT5 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200404#define CONFIG_SYS_IBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
405#define CONFIG_SYS_IBAT5U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
406#define CONFIG_SYS_DBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
407#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
Stefan Roese1eac2a72006-11-29 15:42:37 +0100408
409/* IBAT6 and DBAT6 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200410#define CONFIG_SYS_IBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
411#define CONFIG_SYS_IBAT6U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
412#define CONFIG_SYS_DBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
413#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
Stefan Roese1eac2a72006-11-29 15:42:37 +0100414
415/* IBAT7 and DBAT7 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200416#define CONFIG_SYS_IBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
417#define CONFIG_SYS_IBAT7U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
418#define CONFIG_SYS_DBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
419#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
Stefan Roese1eac2a72006-11-29 15:42:37 +0100420
421/*
422 * For booting Linux, the board info and command line data
423 * have to be in the first 8 MB of memory, since this is
424 * the maximum mapped by the Linux kernel during initialization.
425 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200426#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
427#define CONFIG_SYS_VXWORKS_MAC_PTR 0x42010000 /* use some memory in SRAM that's not used!!! */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100428
429/*-----------------------------------------------------------------------
430 * Cache Configuration
431 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200432#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
Jon Loeliger26a34562007-07-04 22:33:17 -0500433#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200434#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
Stefan Roese1eac2a72006-11-29 15:42:37 +0100435#endif
436
437/*-----------------------------------------------------------------------
438 * L2CR setup -- make sure this is right for your board!
439 * look in include/mpc74xx.h for the defines used here
440 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200441#define CONFIG_SYS_L2
Stefan Roese1eac2a72006-11-29 15:42:37 +0100442
443#if defined (CONFIG_750CX) || defined (CONFIG_750FX)
444#define L2_INIT 0
445#else
446#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
447 L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
448#endif
449
450#define L2_ENABLE (L2_INIT | L2CR_L2E)
451
452/*
453 * Internal Definitions
454 *
455 * Boot Flags
456 */
457#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
458#define BOOTFLAG_WARM 0x02 /* Software reboot */
459
460#endif /* __CONFIG_H */