Bryan O'Donoghue | e6f7c58 | 2019-01-18 17:40:08 +0000 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 | /* |
| 3 | * Copyright (C) 2016 NXP Semiconductors. |
| 4 | * Author: Fabio Estevam <fabio.estevam@nxp.com> |
| 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | |
| 9 | #include <dt-bindings/input/input.h> |
| 10 | #include "imx7s.dtsi" |
| 11 | |
| 12 | / { |
| 13 | model = "Warp i.MX7 Board"; |
| 14 | compatible = "warp,imx7s-warp", "fsl,imx7s"; |
| 15 | |
| 16 | memory@80000000 { |
| 17 | reg = <0x80000000 0x20000000>; |
| 18 | }; |
| 19 | |
Bryan O'Donoghue | e4d8dac | 2019-01-18 17:40:11 +0000 | [diff] [blame] | 20 | aliases { |
| 21 | mmc0 = &usdhc3; |
| 22 | }; |
| 23 | |
Bryan O'Donoghue | e6f7c58 | 2019-01-18 17:40:08 +0000 | [diff] [blame] | 24 | gpio-keys { |
| 25 | compatible = "gpio-keys"; |
| 26 | pinctrl-0 = <&pinctrl_gpio>; |
| 27 | autorepeat; |
| 28 | |
| 29 | back { |
| 30 | label = "Back"; |
| 31 | gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; |
| 32 | linux,code = <KEY_BACK>; |
| 33 | wakeup-source; |
| 34 | }; |
| 35 | }; |
| 36 | |
| 37 | reg_brcm: regulator-brcm { |
| 38 | compatible = "regulator-fixed"; |
| 39 | enable-active-high; |
| 40 | gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; |
| 41 | pinctrl-names = "default"; |
| 42 | pinctrl-0 = <&pinctrl_brcm_reg>; |
| 43 | regulator-name = "brcm_reg"; |
| 44 | regulator-min-microvolt = <3300000>; |
| 45 | regulator-max-microvolt = <3300000>; |
| 46 | startup-delay-us = <200000>; |
| 47 | }; |
| 48 | |
| 49 | reg_bt: regulator-bt { |
| 50 | compatible = "regulator-fixed"; |
| 51 | pinctrl-names = "default"; |
| 52 | pinctrl-0 = <&pinctrl_bt_reg>; |
| 53 | enable-active-high; |
| 54 | gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; |
| 55 | regulator-name = "bt_reg"; |
| 56 | regulator-min-microvolt = <3300000>; |
| 57 | regulator-max-microvolt = <3300000>; |
| 58 | regulator-always-on; |
| 59 | }; |
| 60 | |
| 61 | sound { |
| 62 | compatible = "simple-audio-card"; |
| 63 | simple-audio-card,name = "imx7-sgtl5000"; |
| 64 | simple-audio-card,format = "i2s"; |
| 65 | simple-audio-card,bitclock-master = <&dailink_master>; |
| 66 | simple-audio-card,frame-master = <&dailink_master>; |
| 67 | simple-audio-card,cpu { |
| 68 | sound-dai = <&sai1>; |
| 69 | }; |
| 70 | |
| 71 | dailink_master: simple-audio-card,codec { |
| 72 | sound-dai = <&codec>; |
| 73 | clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; |
| 74 | }; |
| 75 | }; |
| 76 | }; |
| 77 | |
| 78 | &clks { |
| 79 | assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>; |
| 80 | assigned-clock-rates = <884736000>; |
| 81 | }; |
| 82 | |
| 83 | &i2c1 { |
| 84 | pinctrl-names = "default"; |
| 85 | pinctrl-0 = <&pinctrl_i2c1>; |
| 86 | status = "okay"; |
| 87 | |
| 88 | pmic: pfuze3000@8 { |
| 89 | compatible = "fsl,pfuze3000"; |
| 90 | reg = <0x08>; |
| 91 | |
| 92 | regulators { |
| 93 | sw1a_reg: sw1a { |
| 94 | regulator-min-microvolt = <700000>; |
| 95 | regulator-max-microvolt = <1475000>; |
| 96 | regulator-boot-on; |
| 97 | regulator-always-on; |
| 98 | regulator-ramp-delay = <6250>; |
| 99 | }; |
| 100 | |
| 101 | /* use sw1c_reg to align with pfuze100/pfuze200 */ |
| 102 | sw1c_reg: sw1b { |
| 103 | regulator-min-microvolt = <700000>; |
| 104 | regulator-max-microvolt = <1475000>; |
| 105 | regulator-boot-on; |
| 106 | regulator-always-on; |
| 107 | regulator-ramp-delay = <6250>; |
| 108 | }; |
| 109 | |
| 110 | sw2_reg: sw2 { |
| 111 | regulator-min-microvolt = <1500000>; |
| 112 | regulator-max-microvolt = <1850000>; |
| 113 | regulator-boot-on; |
| 114 | regulator-always-on; |
| 115 | }; |
| 116 | |
| 117 | sw3a_reg: sw3 { |
| 118 | regulator-min-microvolt = <900000>; |
| 119 | regulator-max-microvolt = <1650000>; |
| 120 | regulator-boot-on; |
| 121 | regulator-always-on; |
| 122 | }; |
| 123 | |
| 124 | swbst_reg: swbst { |
| 125 | regulator-min-microvolt = <5000000>; |
| 126 | regulator-max-microvolt = <5150000>; |
| 127 | }; |
| 128 | |
| 129 | snvs_reg: vsnvs { |
| 130 | regulator-min-microvolt = <1000000>; |
| 131 | regulator-max-microvolt = <3000000>; |
| 132 | regulator-boot-on; |
| 133 | regulator-always-on; |
| 134 | }; |
| 135 | |
| 136 | vref_reg: vrefddr { |
| 137 | regulator-boot-on; |
| 138 | regulator-always-on; |
| 139 | }; |
| 140 | |
| 141 | vgen1_reg: vldo1 { |
| 142 | regulator-min-microvolt = <1800000>; |
| 143 | regulator-max-microvolt = <3300000>; |
| 144 | regulator-always-on; |
| 145 | }; |
| 146 | |
| 147 | vgen2_reg: vldo2 { |
| 148 | regulator-min-microvolt = <800000>; |
| 149 | regulator-max-microvolt = <1550000>; |
| 150 | }; |
| 151 | |
| 152 | vgen3_reg: vccsd { |
| 153 | regulator-min-microvolt = <2850000>; |
| 154 | regulator-max-microvolt = <3300000>; |
| 155 | regulator-always-on; |
| 156 | }; |
| 157 | |
| 158 | vgen4_reg: v33 { |
| 159 | regulator-min-microvolt = <2850000>; |
| 160 | regulator-max-microvolt = <3300000>; |
| 161 | regulator-always-on; |
| 162 | }; |
| 163 | |
| 164 | vgen5_reg: vldo3 { |
| 165 | regulator-min-microvolt = <1800000>; |
| 166 | regulator-max-microvolt = <3300000>; |
| 167 | regulator-always-on; |
| 168 | }; |
| 169 | |
| 170 | vgen6_reg: vldo4 { |
| 171 | regulator-min-microvolt = <1800000>; |
| 172 | regulator-max-microvolt = <3300000>; |
| 173 | regulator-always-on; |
| 174 | }; |
| 175 | }; |
| 176 | }; |
| 177 | }; |
| 178 | |
| 179 | &i2c2 { |
| 180 | clock-frequency = <100000>; |
| 181 | pinctrl-names = "default"; |
| 182 | pinctrl-0 = <&pinctrl_i2c2>; |
| 183 | status = "okay"; |
| 184 | }; |
| 185 | |
| 186 | &i2c3 { |
| 187 | clock-frequency = <100000>; |
| 188 | pinctrl-names = "default"; |
| 189 | pinctrl-0 = <&pinctrl_i2c3>; |
| 190 | status = "okay"; |
| 191 | }; |
| 192 | |
| 193 | &i2c4 { |
| 194 | clock-frequency = <100000>; |
| 195 | pinctrl-names = "default"; |
| 196 | pinctrl-0 = <&pinctrl_i2c4>; |
| 197 | status = "okay"; |
| 198 | |
| 199 | codec: sgtl5000@a { |
| 200 | #sound-dai-cells = <0>; |
| 201 | reg = <0x0a>; |
| 202 | compatible = "fsl,sgtl5000"; |
| 203 | clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; |
| 204 | pinctrl-names = "default"; |
| 205 | pinctrl-0 = <&pinctrl_sai1_mclk>; |
| 206 | VDDA-supply = <&vgen4_reg>; |
| 207 | VDDIO-supply = <&vgen4_reg>; |
| 208 | VDDD-supply = <&vgen2_reg>; |
| 209 | }; |
| 210 | |
| 211 | mpl3115@60 { |
| 212 | compatible = "fsl,mpl3115"; |
| 213 | reg = <0x60>; |
| 214 | }; |
| 215 | }; |
| 216 | |
| 217 | &sai1 { |
| 218 | pinctrl-names = "default"; |
| 219 | pinctrl-0 = <&pinctrl_sai1>; |
| 220 | assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>, |
| 221 | <&clks IMX7D_SAI1_ROOT_CLK>; |
| 222 | assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>; |
| 223 | assigned-clock-rates = <0>, <36864000>; |
| 224 | status = "okay"; |
| 225 | }; |
| 226 | |
| 227 | &uart1 { |
| 228 | pinctrl-names = "default"; |
| 229 | pinctrl-0 = <&pinctrl_uart1>; |
| 230 | assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; |
| 231 | assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; |
| 232 | status = "okay"; |
| 233 | }; |
| 234 | |
| 235 | &uart3 { |
| 236 | pinctrl-names = "default"; |
| 237 | pinctrl-0 = <&pinctrl_uart3>; |
| 238 | assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; |
| 239 | assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; |
| 240 | uart-has-rtscts; |
| 241 | status = "okay"; |
| 242 | }; |
| 243 | |
| 244 | &uart6 { |
| 245 | pinctrl-names = "default"; |
| 246 | pinctrl-0 = <&pinctrl_uart6>; |
| 247 | assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; |
| 248 | assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; |
| 249 | fsl,dte-mode; |
| 250 | status = "okay"; |
| 251 | }; |
| 252 | |
| 253 | &usbotg1 { |
| 254 | dr_mode = "peripheral"; |
| 255 | status = "okay"; |
| 256 | }; |
| 257 | |
| 258 | &usdhc1 { |
| 259 | pinctrl-names = "default"; |
| 260 | pinctrl-0 = <&pinctrl_usdhc1>; |
| 261 | bus-width = <4>; |
| 262 | keep-power-in-suspend; |
| 263 | no-1-8-v; |
| 264 | non-removable; |
| 265 | vmmc-supply = <®_brcm>; |
| 266 | status = "okay"; |
| 267 | }; |
| 268 | |
| 269 | &usdhc3 { |
| 270 | pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| 271 | pinctrl-0 = <&pinctrl_usdhc3>; |
| 272 | pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| 273 | pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| 274 | assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; |
| 275 | assigned-clock-rates = <400000000>; |
| 276 | bus-width = <8>; |
| 277 | no-1-8-v; |
| 278 | fsl,tuning-step = <2>; |
| 279 | non-removable; |
| 280 | status = "okay"; |
| 281 | }; |
| 282 | |
| 283 | &wdog1 { |
| 284 | pinctrl-names = "default"; |
| 285 | pinctrl-0 = <&pinctrl_wdog>; |
| 286 | fsl,ext-reset-output; |
| 287 | status = "okay"; |
| 288 | }; |
| 289 | |
| 290 | &iomuxc { |
| 291 | pinctrl_brcm_reg: brcmreggrp { |
| 292 | fsl,pins = < |
| 293 | MX7D_PAD_SD2_WP__GPIO5_IO10 0x14 /* WL_REG_ON */ |
| 294 | >; |
| 295 | }; |
| 296 | |
| 297 | pinctrl_bt_reg: btreggrp { |
| 298 | fsl,pins = < |
| 299 | MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* BT_REG_ON */ |
| 300 | >; |
| 301 | }; |
| 302 | |
| 303 | pinctrl_gpio: gpiogrp { |
| 304 | fsl,pins = < |
| 305 | MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1 0x14 |
| 306 | >; |
| 307 | }; |
| 308 | |
| 309 | pinctrl_i2c1: i2c1grp { |
| 310 | fsl,pins = < |
| 311 | MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f |
| 312 | MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f |
| 313 | >; |
| 314 | }; |
| 315 | |
| 316 | pinctrl_i2c2: i2c2grp { |
| 317 | fsl,pins = < |
| 318 | MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f |
| 319 | MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f |
| 320 | >; |
| 321 | }; |
| 322 | |
| 323 | pinctrl_i2c3: i2c3grp { |
| 324 | fsl,pins = < |
| 325 | MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f |
| 326 | MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f |
| 327 | >; |
| 328 | }; |
| 329 | |
| 330 | pinctrl_i2c4: i2c4grp { |
| 331 | fsl,pins = < |
| 332 | MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f |
| 333 | MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f |
| 334 | >; |
| 335 | }; |
| 336 | |
| 337 | pinctrl_sai1: sai1grp { |
| 338 | fsl,pins = < |
| 339 | MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1f |
| 340 | MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x1f |
| 341 | MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f |
| 342 | MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x30 |
| 343 | >; |
| 344 | }; |
| 345 | |
| 346 | pinctrl_sai1_mclk: sai1mclkgrp { |
| 347 | fsl,pins = < |
| 348 | MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f |
| 349 | >; |
| 350 | }; |
| 351 | |
| 352 | pinctrl_uart1: uart1grp { |
| 353 | fsl,pins = < |
| 354 | MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 |
| 355 | MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 |
| 356 | >; |
| 357 | }; |
| 358 | |
| 359 | pinctrl_uart3: uart3grp { |
| 360 | fsl,pins = < |
| 361 | MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x79 |
| 362 | MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x79 |
| 363 | MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x79 |
| 364 | MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x79 |
| 365 | >; |
| 366 | }; |
| 367 | |
| 368 | pinctrl_uart6: uart6grp { |
| 369 | fsl,pins = < |
| 370 | MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX 0x79 |
| 371 | MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX 0x79 |
| 372 | >; |
| 373 | }; |
| 374 | |
| 375 | pinctrl_usdhc1: usdhc1grp { |
| 376 | fsl,pins = < |
| 377 | MX7D_PAD_SD1_CMD__SD1_CMD 0x59 |
| 378 | MX7D_PAD_SD1_CLK__SD1_CLK 0x19 |
| 379 | MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 |
| 380 | MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 |
| 381 | MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 |
| 382 | MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 |
| 383 | MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* WL_HOST_WAKE */ |
| 384 | >; |
| 385 | }; |
| 386 | |
| 387 | pinctrl_usdhc3: usdhc3grp { |
| 388 | fsl,pins = < |
| 389 | MX7D_PAD_SD3_CMD__SD3_CMD 0x59 |
| 390 | MX7D_PAD_SD3_CLK__SD3_CLK 0x19 |
| 391 | MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 |
| 392 | MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 |
| 393 | MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 |
| 394 | MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 |
| 395 | MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 |
| 396 | MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 |
| 397 | MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 |
| 398 | MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 |
| 399 | MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x19 |
| 400 | >; |
| 401 | }; |
| 402 | |
| 403 | pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { |
| 404 | fsl,pins = < |
| 405 | MX7D_PAD_SD3_CMD__SD3_CMD 0x5a |
| 406 | MX7D_PAD_SD3_CLK__SD3_CLK 0x1a |
| 407 | MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a |
| 408 | MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a |
| 409 | MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a |
| 410 | MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a |
| 411 | MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a |
| 412 | MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a |
| 413 | MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a |
| 414 | MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a |
| 415 | MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x1a |
| 416 | >; |
| 417 | }; |
| 418 | |
| 419 | pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { |
| 420 | fsl,pins = < |
| 421 | MX7D_PAD_SD3_CMD__SD3_CMD 0x5b |
| 422 | MX7D_PAD_SD3_CLK__SD3_CLK 0x1b |
| 423 | MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b |
| 424 | MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b |
| 425 | MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b |
| 426 | MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b |
| 427 | MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b |
| 428 | MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b |
| 429 | MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b |
| 430 | MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b |
| 431 | MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x1b |
| 432 | >; |
| 433 | }; |
| 434 | }; |
| 435 | |
| 436 | &iomuxc_lpsr { |
| 437 | pinctrl_wdog: wdoggrp { |
| 438 | fsl,pins = < |
| 439 | MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74 |
| 440 | >; |
| 441 | }; |
| 442 | }; |